diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/handwired/ferris/config.h | 60 | ||||
| -rw-r--r-- | keyboards/handwired/ferris/ferris.c | 17 | ||||
| -rw-r--r-- | keyboards/handwired/ferris/ferris.h | 43 | ||||
| -rw-r--r-- | keyboards/handwired/ferris/info.json | 54 | ||||
| -rw-r--r-- | keyboards/handwired/ferris/keymaps/default/config.h | 39 | ||||
| -rw-r--r-- | keyboards/handwired/ferris/keymaps/default/keymap.c | 39 | ||||
| -rw-r--r-- | keyboards/handwired/ferris/matrix.c | 282 | ||||
| -rw-r--r-- | keyboards/handwired/ferris/readme.md | 16 | ||||
| -rw-r--r-- | keyboards/handwired/ferris/rules.mk | 28 |
9 files changed, 578 insertions, 0 deletions
diff --git a/keyboards/handwired/ferris/config.h b/keyboards/handwired/ferris/config.h new file mode 100644 index 0000000000..33494d9273 --- /dev/null +++ b/keyboards/handwired/ferris/config.h @@ -0,0 +1,60 @@ +/* +Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC2AB +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Pierre +#define PRODUCT Ferris the keeb +#define DESCRIPTION A minimalistic 34 - keys split keyboard + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 10 + +#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2) +#define MATRIX_COLS_PER_SIDE (MATRIX_COLS / 2) + +#define UNUSED_MCU 14 +#define UNUSED_MCP 7 + +// wiring +#define MATRIX_ROW_PINS_MCU \ + { B3, B2, B1, F0 } +#define MATRIX_COL_PINS_MCU \ + { D6, D7, B4, B5, B6 } +#define UNUSED_PINS_MCU \ + { B0, B7, C6, C7, D2, D3, D4, D5, E6, F1, F4, F5, F6, F7 } +#define MATRIX_ROW_PINS_MCP \ + { B0, B1, B2, B3 } +#define MATRIX_COL_PINS_MCP \ + { A0, A1, A2, A3, A4 } +#define UNUSED_PINS_MCP \ + { B4, B5, B6, B7, A5, A6, A7 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + diff --git a/keyboards/handwired/ferris/ferris.c b/keyboards/handwired/ferris/ferris.c new file mode 100644 index 0000000000..0e132fa984 --- /dev/null +++ b/keyboards/handwired/ferris/ferris.c @@ -0,0 +1,17 @@ +/* +Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "ferris.h" diff --git a/keyboards/handwired/ferris/ferris.h b/keyboards/handwired/ferris/ferris.h new file mode 100644 index 0000000000..4602637ca6 --- /dev/null +++ b/keyboards/handwired/ferris/ferris.h @@ -0,0 +1,43 @@ +/* +Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +// clang-format off + +/* left hand right hand */ +#define LAYOUT(\ + K0_0, K0_1, K0_2, K0_3, K0_4, K0_5, K0_6, K0_7, K0_8, K0_9,\ + K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9,\ + K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9,\ + K3_3, K3_4, K3_5, K3_6)\ +/* matrix positions */\ +{\ + {K0_0, K0_1, K0_2, K0_3, K0_4},\ + {K1_0, K1_1, K1_2, K1_3, K1_4},\ + {K2_0, K2_1, K2_2, K2_3, K2_4},\ + {KC_NO, KC_NO, KC_NO, K3_3, K3_4},\ + \ + {K0_5, K0_6, K0_7, K0_8, K0_9},\ + {K1_5, K1_6, K1_7, K1_8, K1_9},\ + {K2_5, K2_6, K2_7, K2_8, K2_9},\ + {K3_5, K3_6, KC_NO, KC_NO, KC_NO}\ +} + +// clang-format on diff --git a/keyboards/handwired/ferris/info.json b/keyboards/handwired/ferris/info.json new file mode 100644 index 0000000000..ffffb58ecf --- /dev/null +++ b/keyboards/handwired/ferris/info.json @@ -0,0 +1,54 @@ +{ + "keyboard_name": "Ferris", + "url": "https://github.com/pierrechevalier83/ferris/", + "maintainer": "@pierrec83", + "width": 12, + "height": 4.75, + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0.93}, + {"x": 1, "y": 0.31}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0.28}, + {"x": 4, "y": 0.42}, + + {"x": 7, "y": 0.42}, + {"x": 8, "y": 0.28}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0.31}, + {"x": 11, "y": 0.93}, + + {"x": 0, "y": 1.93}, + {"x": 1, "y": 1.31}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1.28}, + {"x": 4, "y": 1.42}, + + {"x": 7, "y": 1.42}, + {"x": 8, "y": 1.28}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1.31}, + {"x": 11, "y": 1.93}, + + {"x": 0, "y": 2.93}, + {"x": 1, "y": 2.31}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2.28}, + {"x": 4, "y": 2.42}, + + {"x": 7, "y": 2.42}, + {"x": 8, "y": 2.28}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2.31}, + {"x": 11, "y": 2.93}, + + {"x": 3.5, "y": 3.75}, + {"x": 4.5, "y": 4}, + + {"x": 6.5, "y": 4}, + {"x": 7.5, "y": 3.75} + ] + } + } +} diff --git a/keyboards/handwired/ferris/keymaps/default/config.h b/keyboards/handwired/ferris/keymaps/default/config.h new file mode 100644 index 0000000000..cf0fb7478e --- /dev/null +++ b/keyboards/handwired/ferris/keymaps/default/config.h @@ -0,0 +1,39 @@ +/* +Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once +// Set the mouse settings to a comfortable speed/accuracy trade-off, +// assuming a screen refresh rate of 60 Htz or higher +// The default is 50. This makes the mouse ~3 times faster and more accurate +#define MOUSEKEY_INTERVAL 16 +// The default is 20. Since we made the mouse about 3 times faster with the previous setting, +// give it more time to accelerate to max speed to retain precise control over short distances. +#define MOUSEKEY_TIME_TO_MAX 40 +// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive +#define MOUSEKEY_DELAY 100 +// It makes sense to use the same delay for the mouseweel +#define MOUSEKEY_WHEEL_DELAY 100 +// The default is 100 +#define MOUSEKEY_WHEEL_INTERVAL 50 +// The default is 40 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 100 + +// Pick good defaults for enabling homerow modifiers +#define TAPPING_TERM 200 +#define PERMISSIVE_HOLD +#define IGNORE_MOD_TAP_INTERRUPT +#define TAPPING_FORCE_HOLD diff --git a/keyboards/handwired/ferris/keymaps/default/keymap.c b/keyboards/handwired/ferris/keymaps/default/keymap.c new file mode 100644 index 0000000000..faf5203e7d --- /dev/null +++ b/keyboards/handwired/ferris/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* +Copyright 2020 Pierre Chevalier <pierrechevalier83@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +// Blank template at the bottom +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Qwerty + * + * ,-----------------------------. ,-----------------------------. + * | Q | W | E | R | T | | Y | U | I | O | P | + * |-----+-----+-----+-----+-----| |-----------------------------| + * | A | S | D | F | G | | H | J | K | L | ; | + * |-----+-----+-----+-----+-----+ |-----------------------------| + * | Z | X | C | V | B | | N | M | < | > | ? | + * `-----+-----+-----+-----+-----+--. ,-+-----------------------------' + * | BSPC | SPC | | SPC | ENT | + * '------------' '-----------' + */ +[0] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_BSPC, KC_SPC, KC_SPC, KC_ENT) +}; diff --git a/keyboards/handwired/ferris/matrix.c b/keyboards/handwired/ferris/matrix.c new file mode 100644 index 0000000000..e13c35d358 --- /dev/null +++ b/keyboards/handwired/ferris/matrix.c @@ -0,0 +1,282 @@ +/* +Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> + 2020 Pierre Chevalier <pierrechevalier83@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * This code was heavily inspired by the ergodox_ez keymap, and modernized + * to take advantage of the quantum.h microcontroller agnostics gpio control + * abstractions and use the macros defined in config.h for the wiring as opposed + * to repeating that information all over the place. + */ + +#include QMK_KEYBOARD_H +#include "i2c_master.h" + +extern i2c_status_t mcp23017_status; +#define I2C_TIMEOUT 1000 + +// For a better understanding of the i2c protocol, this is a good read: +// https://www.robot-electronics.co.uk/i2c-tutorial + +// I2C address: +// See the datasheet, section 3.3.1 on addressing I2C devices and figure 3-6 for an +// illustration +// http://ww1.microchip.com/downloads/en/devicedoc/20001952c.pdf +// All address pins of the mcp23017 are connected to the ground on the ferris +// | 0 | 1 | 0 | 0 | A2 | A1 | A0 | +// | 0 | 1 | 0 | 0 | 0 | 0 | 0 | +#define I2C_ADDR 0b0100000 +#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE) +#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ) + +// Register addresses +// See https://github.com/adafruit/Adafruit-MCP23017-Arduino-Library/blob/master/Adafruit_MCP23017.h +#define IODIRA 0x00 // i/o direction register +#define IODIRB 0x01 +#define GPPUA 0x0C // GPIO pull-up resistor register +#define GPPUB 0x0D +#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) +#define GPIOB 0x13 +#define OLATA 0x14 // output latch register +#define OLATB 0x15 + +bool i2c_initialized = 0; +i2c_status_t mcp23017_status = I2C_ADDR; + +uint8_t init_mcp23017(void) { + print("starting init"); + mcp23017_status = I2C_ADDR; + + // I2C subsystem + if (i2c_initialized == 0) { + i2c_init(); // on pins D(1,0) + i2c_initialized = true; + wait_ms(I2C_TIMEOUT); + } + + // set pin direction + // - unused : input : 1 + // - input : input : 1 + // - driving : output : 0 + mcp23017_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (mcp23017_status) goto out; + mcp23017_status = i2c_write(IODIRA, I2C_TIMEOUT); + if (mcp23017_status) goto out; + // This means: we will read all the bits on GPIOA + mcp23017_status = i2c_write(0b11111111, I2C_TIMEOUT); + if (mcp23017_status) goto out; + // This means: we will write to the pins 0-4 on GPIOB (in select_rows) + mcp23017_status = i2c_write(0b11110000, I2C_TIMEOUT); + if (mcp23017_status) goto out; + i2c_stop(); + + // set pull-up + // - unused : on : 1 + // - input : on : 1 + // - driving : off : 0 + mcp23017_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (mcp23017_status) goto out; + mcp23017_status = i2c_write(GPPUA, I2C_TIMEOUT); + if (mcp23017_status) goto out; + // This means: we will read all the bits on GPIOA + mcp23017_status = i2c_write(0b11111111, I2C_TIMEOUT); + if (mcp23017_status) goto out; + // This means: we will write to the pins 0-4 on GPIOB (in select_rows) + mcp23017_status = i2c_write(0b11110000, I2C_TIMEOUT); + if (mcp23017_status) goto out; + +out: + i2c_stop(); + return mcp23017_status; +} + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; // debounced values + +static matrix_row_t read_cols(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +static uint8_t mcp23017_reset_loop; + +void matrix_init_custom(void) { + // initialize row and col + + mcp23017_status = init_mcp23017(); + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } +} + +void matrix_power_up(void) { + mcp23017_status = init_mcp23017(); + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } +} + +// Reads and stores a row, returning +// whether a change occurred. +static inline bool store_matrix_row(matrix_row_t current_matrix[], uint8_t index) { + matrix_row_t temp = read_cols(index); + if (current_matrix[index] != temp) { + current_matrix[index] = temp; + return true; + } + return false; +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + if (mcp23017_status) { // if there was an error + if (++mcp23017_reset_loop == 0) { + // if (++mcp23017_reset_loop >= 1300) { + // since mcp23017_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + dprint("trying to reset mcp23017\n"); + mcp23017_status = init_mcp23017(); + if (mcp23017_status) { + dprint("right side not responding\n"); + } else { + dprint("right side attached\n"); + } + } + } + + bool changed = false; + for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { + // select rows from left and right hands + uint8_t left_index = i; + uint8_t right_index = i + MATRIX_ROWS_PER_SIDE; + select_row(left_index); + select_row(right_index); + + // we don't need a 30us delay anymore, because selecting a + // left-hand row requires more than 30us for i2c. + + changed |= store_matrix_row(current_matrix, left_index); + changed |= store_matrix_row(current_matrix, right_index); + + unselect_rows(); + } + + return changed; +} + +static void init_cols(void) { + // init on mcp23017 + // not needed, already done as part of init_mcp23017() + + // init on mcu + pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_MCU; + for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) { + pin_t pin = matrix_col_pins_mcu[pin_index]; + setPinInput(pin); + writePinHigh(pin); + } +} + +static matrix_row_t read_cols(uint8_t row) { + if (row < MATRIX_ROWS_PER_SIDE) { + pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_MCU; + matrix_row_t current_row_value = 0; + // For each col... + for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) { + // Select the col pin to read (active low) + uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]); + + // Populate the matrix row with the state of the col pin + current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + return current_row_value; + } else { + if (mcp23017_status) { // if there was an error + return 0; + } else { + uint8_t data = 0; + mcp23017_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (mcp23017_status) goto out; + mcp23017_status = i2c_write(GPIOA, I2C_TIMEOUT); + if (mcp23017_status) goto out; + mcp23017_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT); + if (mcp23017_status) goto out; + mcp23017_status = i2c_read_nack(I2C_TIMEOUT); + if (mcp23017_status < 0) goto out; + // We read all the pins on GPIOA. + // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero. + // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys. + // Since the pins connected to eact columns are sequential, and counting from zero up (col 5 -> GPIOA0, col 6 -> GPIOA1 and so on), the only transformation needed is a bitwise not to swap all zeroes and ones. + data = ~((uint8_t)mcp23017_status); + mcp23017_status = I2C_STATUS_SUCCESS; + out: + i2c_stop(); + // return reverse_bits(data, MATRIX_COLS_PER_SIDE); + return data; + } + } +} + +static void unselect_rows(void) { + // no need to unselect on mcp23017, because the select step sets all + // the other row bits high, and it's not changing to a different + // direction + + // unselect rows on microcontroller + pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU; + for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) { + pin_t pin = matrix_row_pins_mcu[pin_index]; + setPinInput(pin); + writePinLow(pin); + } +} + +static void select_row(uint8_t row) { + if (row < MATRIX_ROWS_PER_SIDE) { + // select on atmega32u4 + pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_MCU; + pin_t pin = matrix_row_pins_mcu[row]; + setPinOutput(pin); + writePinLow(pin); + } else { + // select on mcp23017 + if (mcp23017_status) { // if there was an error + // do nothing + } else { + mcp23017_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (mcp23017_status) goto out; + mcp23017_status = i2c_write(GPIOB, I2C_TIMEOUT); + if (mcp23017_status) goto out; + // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one. + // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus. + mcp23017_status = i2c_write(0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE)), I2C_TIMEOUT); + + if (mcp23017_status) goto out; + out: + i2c_stop(); + } + } +} diff --git a/keyboards/handwired/ferris/readme.md b/keyboards/handwired/ferris/readme.md new file mode 100644 index 0000000000..23aeca874c --- /dev/null +++ b/keyboards/handwired/ferris/readme.md @@ -0,0 +1,16 @@ +# Ferris + + + + +A split 34 keys column staggered keyboard named and decorated after the rustlang mascott. All PCB files and some thoughts on the design are available on the [project's github page](https://github.com/pierrechevalier83/ferris) + +* Keyboard Maintainer: [Pierre Chevalier](https://github.com/pierrechevalier83) +* Hardware Supported: Ferris PCB +* Hardware Availability: Still in prototype stage + +Make example for this keyboard (after setting up your build environment): + + make handwired/ferris:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/ferris/rules.mk b/keyboards/handwired/ferris/rules.mk new file mode 100644 index 0000000000..8645dbba0d --- /dev/null +++ b/keyboards/handwired/ferris/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes +CUSTOM_MATRIX = lite +NO_USB_STARTUP_CHECK = yes +LTO_ENABLE = yes + +SRC += matrix.c +QUANTUM_LIB_SRC += i2c_master.c |