diff options
Diffstat (limited to 'keyboards')
85 files changed, 4249 insertions, 693 deletions
diff --git a/keyboards/atomic/keymaps/twolayer.c b/keyboards/atomic/keymaps/twolayer.c new file mode 100644 index 0000000000..8ea045d806 --- /dev/null +++ b/keyboards/atomic/keymaps/twolayer.c @@ -0,0 +1,72 @@ +#include "atomic.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | LCTRL1 | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 6.25u ---------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LALT | FN | XXXXXX . SPACE | RCTRL | RALT | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [0] = { /* QWERTY */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_ALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RCTL, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + + +/* FUNCTION + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | GRV | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | SCR LK | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | PAUSE | PR SCR | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT | VOL+ | VOL- | PLAY | | XXXXXX . | WHEEL+ | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | NUM LK | | | | | | | | INSERT | END1 | HOME | XXXXXX . | MOUS U | WHEEL- | + * |--------+--------+--------+--------+--------+- 6.25 ------------+--------+--------+------+--------+-----------------+--------+--------| + * | | | FN | XXXXXX . MS BT1 | | | FN | MOUS L | MOUS D | MOUS R | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [1] = { /* FUNCTION LAYER*/ + { KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, + { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, + { KC_NLCK, _______, _______, _______, _______, _______, _______, _______, KC_INSERT, KC_END, KC_HOME, ___T___, ___T___, KC_MS_U, KC_WH_D }, + { _______, _______, MO(1), _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, MO(1), KC_MS_L, KC_MS_D, KC_MS_R }, + }, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), + [2] = ACTION_LAYER_MOMENTARY(1), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/atreus/keymaps/default/keymap.c b/keyboards/atreus/keymaps/default/keymap.c index ce92e89c9c..15ebad14d4 100644 --- a/keyboards/atreus/keymaps/default/keymap.c +++ b/keyboards/atreus/keymaps/default/keymap.c @@ -39,8 +39,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LW] = { /* [> LOWER <] */ {KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_TRNS, KC_UP, KC_F7, KC_F8, KC_F9, KC_F10}, {KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN, KC_TRNS, KC_DOWN, KC_F4, KC_F5, KC_F6, KC_F11}, - {KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, RESET, KC_LCTL, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F12}, - {KC_TRNS, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_SPC, DF(_QW), KC_PSCR, KC_SLCK, KC_PAUS} + {KC_NO, KC_VOLU, KC_NO, KC_NO, RESET, KC_LCTL, KC_NO, KC_F1, KC_F2, KC_F3, KC_F12}, + {KC_NO, KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LALT, KC_SPC, TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS} }}; const uint16_t PROGMEM fn_actions[] = { diff --git a/keyboards/atreus/keymaps/xyverz/keymap.c b/keyboards/atreus/keymaps/xyverz/keymap.c index b418cc9b5e..ed943eb669 100644 --- a/keyboards/atreus/keymaps/xyverz/keymap.c +++ b/keyboards/atreus/keymaps/xyverz/keymap.c @@ -12,49 +12,156 @@ extern keymap_config_t keymap_config; // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. -#define _DV 0 -#define _QW 1 -#define _CM 2 -#define _L1 3 -#define _L2 4 +#define _DVORAK 0 +#define _QWERTY 1 +#define _COLEMAK 2 +#define _DVORMAC 3 +#define _LOWER 4 +#define _RAISE 5 +#define _ADJUST 16 -// Macro name shortcuts -#define DVORAK M(_DV) -#define QWERTY M(_QW) -#define COLEMAK M(_CM) +enum planck_keycodes { + DVORAK = SAFE_RANGE, + QWERTY, + COLEMAK, + DVORMAC, + LOWER, + RAISE, + BACKLIT +}; + +// Adding macros to make the keymaps below much easier to read. +#define SFTSCLN SFT_T(KC_SCLN) +#define SFTSLSH SFT_T(KC_SLSH) +#define SFTZED SFT_T(KC_Z) +#define ALTENT ALT_T(KC_ENT) +#define ESCTRL CTL_T(KC_ESC) +#define TABALT ALT_T(KC_TAB) +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_DV] = { /* Dvorak */ - {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_NO, KC_F, KC_G, KC_C, KC_R, KC_L }, - {KC_A, KC_O, KC_E, KC_U, KC_I, KC_NO, KC_D, KC_H, KC_T, KC_N, KC_S }, - {SFT_T(KC_SCLN), KC_Q, KC_J, KC_K, KC_X, CTL_T(KC_DEL), KC_B, KC_M, KC_W, KC_V, SFT_T(KC_Z) }, - {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_SLSH, KC_EQL} +/* Dvorak Layer + ,----------------------------------. ,----------------------------------. + | ' | , | . | P | Y | | F | G | C | R | L | + |------+------+------+------+------| |------+------+------+------+------| + | A | O | E | U | I | | D | H | T | N | S | + |------+------+------+------+------|------.,------|------+------+------+------+------| + |SFT/ ;| Q | J | K | X | CTRL ||Alt / | B | M | W | V |SFT/ Z| + |------+------+------+------+------| ||Enter |------+------+------+------+------| + | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | / | \ | + `----------------------------------' `----------------------------------' */ + [_DVORAK] = { + {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, KC_F, KC_G, KC_C, KC_R, KC_L }, + {KC_A, KC_O, KC_E, KC_U, KC_I, XXXXXXX, KC_D, KC_H, KC_T, KC_N, KC_S }, + {SFTSCLN, KC_Q, KC_J, KC_K, KC_X, KC_LCTL, KC_B, KC_M, KC_W, KC_V, SFTZED }, + {ESCTRL, TABALT, KC_LGUI, LOWER, KC_BSPC, ALTENT, KC_SPC, RAISE, KC_MINS, KC_SLSH, KC_BSLS} + }, + +/* QWERTY Layer + ,----------------------------------. ,----------------------------------. + | Q | W | E | R | T | | Y | U | I | O | P | + |------+------+------+------+------| |------+------+------+------+------| + | A | S | D | F | G | | H | J | K | L | ; | + |------+------+------+------+------|------.,------|------+------+------+------+------| + |SFT/ Z| X | C | V | B | CTRL ||Alt / | N | M | , | . |SFT/ /| + |------+------+------+------+------| ||Enter |------+------+------+------+------| + | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | ' | \ | + `----------------------------------' `----------------------------------' */ + [_QWERTY] = { + {KC_Q, KC_W, KC_E, KC_R, KC_T, XXXXXXX, KC_Y, KC_U, KC_I, KC_O, KC_P }, + {KC_A, KC_S, KC_D, KC_F, KC_G, XXXXXXX, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, + {SFTZED, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_N, KC_M, KC_COMM, KC_DOT, SFTSLSH}, + {ESCTRL, TABALT, KC_LGUI, LOWER, KC_BSPC, ALTENT, KC_SPC, RAISE, KC_MINS, KC_QUOT, KC_BSLS} + }, + +/* Colemak Layer + ,----------------------------------. ,----------------------------------. + | Q | W | F | P | G | | J | L | U | Y | L | + |------+------+------+------+------| |------+------+------+------+------| + | A | R | S | T | D | | H | N | E | I | S | + |------+------+------+------+------|------.,------|------+------+------+------+------| + |SFT/ Z| X | C | V | B | CTRL ||Alt / | K | M | , | . |SFT/ /| + |------+------+------+------+------| ||Enter |------+------+------+------+------| + | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | ' | \ | + `----------------------------------' `----------------------------------'*/ + [_COLEMAK] = { + {KC_Q, KC_W, KC_F, KC_P, KC_G, XXXXXXX, KC_J, KC_L, KC_U, KC_Y, KC_SCLN}, + {KC_A, KC_R, KC_S, KC_T, KC_D, XXXXXXX, KC_H, KC_N, KC_E, KC_I, KC_O }, + {SFTZED, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_K, KC_M, KC_COMM, KC_DOT, SFTSLSH}, + {ESCTRL, TABALT, KC_LGUI, LOWER, KC_BSPC, ALTENT, KC_SPC, RAISE, KC_MINS, KC_QUOT, KC_BSLS} }, - [_QW] = { /* Qwerty */ - {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P }, - {KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN}, - {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_N, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, - {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT} + +/* Dvorak Layer with Command key on left thumb instead of Control + ,----------------------------------. ,----------------------------------. + | ' | , | . | P | Y | | F | G | C | R | L | + |------+------+------+------+------| |------+------+------+------+------| + | A | O | E | U | I | | D | H | T | N | S | + |------+------+------+------+------|------.,------|------+------+------+------+------| + |SFT/ ;| Q | J | K | X | CMD ||Alt / | B | M | W | V |SFT/ Z| + |------+------+------+------+------| ||Enter |------+------+------+------+------| + | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | / | \ | + `----------------------------------' `----------------------------------' */ + [_DVORMAC] = { + {KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, KC_F, KC_G, KC_C, KC_R, KC_L }, + {KC_A, KC_O, KC_E, KC_U, KC_I, XXXXXXX, KC_D, KC_H, KC_T, KC_N, KC_S }, + {SFTSCLN, KC_Q, KC_J, KC_K, KC_X, KC_LGUI, KC_B, KC_M, KC_W, KC_V, SFTZED }, + {ESCTRL, TABALT, KC_LGUI, LOWER, KC_BSPC, ALTENT, KC_SPC, RAISE, KC_MINS, KC_SLSH, KC_BSLS} }, - [_CM] = { /* Colemak */ - {KC_Q, KC_W, KC_F, KC_P, KC_G, KC_NO, KC_J, KC_L, KC_U, KC_Y, KC_SCLN}, - {KC_A, KC_R, KC_S, KC_T, KC_D, KC_NO, KC_H, KC_N, KC_E, KC_I, KC_O }, - {SFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, CTL_T(KC_DEL), KC_K, KC_M, KC_COMM, KC_DOT, SFT_T(KC_SLSH) }, - {KC_ESC, KC_TAB, KC_LGUI, MO(_L2), KC_BSPC, ALT_T(KC_ENT), KC_SPC, MO(_L1), KC_MINS, KC_QUOT, KC_ENT} + +/* LOWER Layer + ,----------------------------------. ,----------------------------------. + | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + |------+------+------+------+------| |------+------+------+------+------| + | CAPS | | UP | | Home | | PgDn | | + | { | } | + |------+------+------+------+------|------.,------|------+------+------+------+------| + | | Left | Down | Right| End | || | PgUp | Mute | Vol- | Vol+ | | + |------+------+------+------+------| || |------+------+------+------+------| + | ~ | | | | Del |------'`------| Ins | | | | | + `----------------------------------' `----------------------------------'*/ + [_LOWER] = { + {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, XXXXXXX, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, + {KC_CAPS, _______, KC_UP, _______, KC_HOME, XXXXXXX, KC_PGUP, _______, KC_PLUS, KC_LCBR, KC_RCBR}, + {_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______, KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______}, + {KC_TILD, _______, _______, _______, KC_DEL, _______, KC_INS, _______, _______, _______, _______} }, - [_L1] = { /* LAYER 1 */ - {KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0 }, - {KC_TAB, KC_INS, KC_UP, KC_DEL, KC_HOME, KC_NO, KC_PGUP, KC_MUTE, KC_VOLD, KC_VOLU, KC_EQL }, - {KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_LCTL, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, KC_BSLS}, - {KC_TRNS, KC_GRV, KC_LGUI, KC_TRNS, KC_DEL, KC_LALT, KC_SPC, KC_TRNS, KC_LBRC, KC_RBRC, KC_ENT } + +/* RAISE Layer + ,----------------------------------. ,----------------------------------. + | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | + |------+------+------+------+------| |------+------+------+------+------| + | CAPS | | UP | | Home | | PgDn | | = | [ | ] | + |------+------+------+------+------|------.,------|------+------+------+------+------| + | | Left | Down | Right| End | || | PgUp | Prev | Play | Next | | + |------+------+------+------+------| || |------+------+------+------+------| + | ` | | | | Del |------'`------| Ins | | | | | + `----------------------------------' `----------------------------------'*/ + [_RAISE] = { + {KC_1, KC_2, KC_3, KC_4, KC_5, XXXXXXX, KC_6, KC_7, KC_8, KC_9, KC_0 }, + {KC_CAPS, _______, KC_UP, _______, KC_HOME, XXXXXXX, KC_PGUP, _______, KC_EQL, KC_LBRC, KC_RBRC}, + {_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______, KC_PGDN, KC_MPRV, KC_MPLY, KC_MNXT, _______}, + {KC_GRV, _______, _______, _______, KC_DEL, _______, KC_INS, _______, _______, _______, _______} }, - [_L2] = { /* LAYER 2 */ - {KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_NO, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN}, - {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_PLUS}, - {KC_TRNS, KC_TRNS, DVORAK, QWERTY, COLEMAK, KC_LCTL, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12 }, - {KC_TRNS, KC_TRNS, KC_LGUI, KC_TRNS, KC_BSPC, KC_LALT, KC_SPC, KC_TRNS, LSFT(KC_LBRC), LSFT(KC_RBRC), RESET} + +/* ADJUST Layer + ,----------------------------------. ,----------------------------------. + | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | + |------+------+------+------+------| |------+------+------+------+------| + | F11 | | | | | | | PrSc | ScLk | Paus | F12 | + |------+------+------+------+------|------.,------|------+------+------+------+------| + | |QWERTY|COLEMK|DVORAK|DVORMC| || | | | | | | + |------+------+------+------+------| || |------+------+------+------+------| + | | | | | |------'`------| | | | | RESET| + `----------------------------------' `----------------------------------'*/ + [_ADJUST] = { + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, XXXXXXX, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 }, + {KC_F11, _______, _______, _______, _______, XXXXXXX, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_F12 }, + {_______, QWERTY, COLEMAK, DVORAK, DVORMAC, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET } } + }; const uint16_t PROGMEM fn_actions[] = { @@ -66,24 +173,52 @@ void persistant_default_layer_set(uint16_t default_layer) { default_layer_set(default_layer); } -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _DV: +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case DVORMAC: if (record->event.pressed) { - persistant_default_layer_set(1UL<<_DV); + persistant_default_layer_set(1UL<<_DVORMAC); } + return false; break; - case _QW: + case LOWER: if (record->event.pressed) { - persistant_default_layer_set(1UL<<_QW); + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); } + return false; break; - case _CM: + case RAISE: if (record->event.pressed) { - persistant_default_layer_set(1UL<<_CM); + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); } + return false; break; } - return MACRO_NONE; + return true; }; diff --git a/keyboards/atreus/keymaps/xyverz/readme.md b/keyboards/atreus/keymaps/xyverz/readme.md new file mode 100644 index 0000000000..ec7d836c17 --- /dev/null +++ b/keyboards/atreus/keymaps/xyverz/readme.md @@ -0,0 +1,107 @@ +# Xyverz's Atreus Keymap + +## About this keymap: + +This is the second iteration of my Atreus keymap. The first one was as close to the planck as I could get at the +time, but still very much like the original Atreus keymap. I've managed to get things working better now and have +implemented (more like copied) the RAISE/LOWER/ADJUST layers. This is a work in progress, but I think I'm closer +to a final go with this. + +I'm using MOD_TAP quite a bit in this keymap. On all layers, R4 pinky keys use mod-tap and are SHIFT when held +and their normal keys when tapped. In addition, ESC and TAB are also set as Ctrl and ALT respectively when held, +and Enter/ALT on the right thumb key for all layers. + +I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts. + +Recently added: Documentation, Formatting, and another Dvorak layer that has Command on the left thumb, instead of +Control. + +## Still to do: + + * Enjoy this revision; figure out new things later. + +### Layer 0: Dvorak layer + + ,----------------------------------. ,----------------------------------. + | ' | , | . | P | Y | | F | G | C | R | L | + |------+------+------+------+------| |------+------+------+------+------| + | A | O | E | U | I | | D | H | T | N | S | + |------+------+------+------+------|------.,------|------+------+------+------+------| + |Shft ;| Q | J | K | X | CTRL ||Alt / | B | M | W | V |Shft Z| + |------+------+------+------+------| ||Enter |------+------+------+------+------| + | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | / | \ | + `----------------------------------' `----------------------------------' + +### Layer 1: QWERTY layer + + ,----------------------------------. ,----------------------------------. + | Q | W | E | R | T | | Y | U | I | O | P | + |------+------+------+------+------| |------+------+------+------+------| + | A | S | D | F | G | | H | J | K | L | ; | + |------+------+------+------+------|------.,------|------+------+------+------+------| + |Shft Z| X | C | V | B | CTRL ||Alt / | N | M | , | . |Shft /| + |------+------+------+------+------| ||Enter |------+------+------+------+------| + | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | ' | \ | + `----------------------------------' `----------------------------------' + +### Keymap 2: Colemak layer + + ,----------------------------------. ,----------------------------------. + | Q | W | F | P | G | | J | L | U | Y | L | + |------+------+------+------+------| |------+------+------+------+------| + | A | R | S | T | D | | H | N | E | I | S | + |------+------+------+------+------|------.,------|------+------+------+------+------| + |Shft Z| X | C | V | B | CTRL ||Alt / | K | M | , | . |Shft /| + |------+------+------+------+------| ||Enter |------+------+------+------+------| + | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | ' | \ | + `----------------------------------' `----------------------------------' + +### Keymap 3: Dvorak for Mac layout + + ,----------------------------------. ,----------------------------------. + | ' | , | . | P | Y | | F | G | C | R | L | + |------+------+------+------+------| |------+------+------+------+------| + | A | O | E | U | I | | D | H | T | N | S | + |------+------+------+------+------|------.,------|------+------+------+------+------| + |SFT/ ;| Q | J | K | X | CMD ||Alt / | B | M | W | V |SFT/ Z| + |------+------+------+------+------| ||Enter |------+------+------+------+------| + | Esc | Tab | GUI | LOWER| BkSp |------'`------| Spc | RAISE| - | / | \ | + `----------------------------------' `----------------------------------' + +### Keymap 4: LOWER layer + + ,----------------------------------. ,----------------------------------. + | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + |------+------+------+------+------| |------+------+------+------+------| + | CAPS | | UP | | Home | | PgDn | | + | { | } | + |------+------+------+------+------|------.,------|------+------+------+------+------| + | | Left | Down | Right| End | || | PgUp | Mute | Vol- | Vol+ | | + |------+------+------+------+------| || |------+------+------+------+------| + | ~ | | | | Del |------'`------| Ins | | | | | + `----------------------------------' `----------------------------------' + + +### Keymap 5: RAISE layer + + ,----------------------------------. ,----------------------------------. + | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | + |------+------+------+------+------| |------+------+------+------+------| + | CAPS | | UP | | Home | | PgDn | | = | [ | ] | + |------+------+------+------+------|------.,------|------+------+------+------+------| + | | Left | Down | Right| End | || | PgUp | Prev | Play | Next | | + |------+------+------+------+------| || |------+------+------+------+------| + | ` | | | | Del |------'`------| Ins | | | | | + `----------------------------------' `----------------------------------' + +### Keymap 6: ADJUST layer + + ,----------------------------------. ,----------------------------------. + | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | + |------+------+------+------+------| |------+------+------+------+------| + | F11 | | | | | | | PScr | SLck | Paus | F12 | + |------+------+------+------+------|------.,------|------+------+------+------+------| + | |QWERTY|COLEMK|DVORAK|DVORMC| || | | | | | | + |------+------+------+------+------| || |------+------+------+------+------| + | | | | | |------'`------| | | | | RESET| + `----------------------------------' `----------------------------------' + diff --git a/keyboards/atreus62/keymaps/xyverz/keymap.c b/keyboards/atreus62/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..7b7c69f57a --- /dev/null +++ b/keyboards/atreus62/keymaps/xyverz/keymap.c @@ -0,0 +1,175 @@ +/* This is the Atreus62 keyboard layout by Xyverz aka u/Zrevyx on r/mk + I've blatantly stolen what works for me from the Planck and Preonic + layouts and modified this file to fit me. Initial credet goes to + u/profet23 for the doing all the work and adding this keyboard to + QMK in the first place. + + I've got Dvorak, Qwerty, and Colemak layouts at this time, with the + possibility of adding more in the future. + + The bottom row is fairly Kinesis-ish since the Contour and Advantage + keyboards have been my daily drivers for the last 17 years. I hope + You can get some enjoyment out of this layout should you chose it! + +CHANGELOG: + + 0.1 - Initial commit. Based off of Profet's default keymap. + 0.2 - Converted to a more Planck/Preonic keymap style file with + persistent layers enabled. Renamed layers to reflect OLKB maps. + Added a TODO list. + +TODO: + + * Make the layout more efficient, even if it means changing the RAISE + and LOWER functionality. + * Add legends in comments for each layer. Maybe. + * Add a gaming layer. + +*/ + +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +#include "atreus62.h" +#include "action_layer.h" +#include "eeconfig.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _DVORAK 0 +#define _QWERTY 1 +#define _COLEMAK 2 +#define _WOW 3 +#define _LOWER 4 +#define _RAISE 5 +#define _ADJUST 16 + +enum atreus52_keycodes { + DVORAK = SAFE_RANGE, + QWERTY, + COLEMAK, + WOW, + LOWER, + RAISE +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DVORAK] = { /* dvorak */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS }, + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, _______, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH }, + { KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, _______, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS }, + { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LGUI, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT }, + { KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_ENT, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL } + }, + + [_QWERTY] = { /* qwerty */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS }, + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, _______, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL }, + { KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, _______, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + { KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_ENT, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL } + }, + + [_COLEMAK] = { /* colemak */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS }, + { KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, _______, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL }, + { KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, _______, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, + { KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_ENT, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL} + }, + + [_WOW] = { /* Dvorak with minor modifications for playing World of Warcraft */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS }, + { KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, _______, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH }, + { KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, _______, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS }, + { KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_LALT, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT }, + { KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, CTL_T(KC_ENT), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } + }, + + [_LOWER] = { + { KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12 }, + { KC_TILD, KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PIPE }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PLUS, KC_LCBR, KC_RCBR, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______ }, + { _______, _______, KC_HOME, KC_END, _______, KC_DEL, _______, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______ } + }, + [_RAISE] = { + { KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12 }, + { KC_TILD, KC_GRV, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSLS }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_EQL, KC_LBRC, KC_RBRC, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______ }, + { _______, _______, KC_HOME, KC_END, _______, KC_DEL, _______, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______ } + }, + [_ADJUST] = { + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, WOW }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ } + }, + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case WOW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_WOW); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + } + return true; +}; diff --git a/keyboards/clueboard/keymaps/xyverz/Makefile b/keyboards/clueboard/keymaps/xyverz/Makefile new file mode 100644 index 0000000000..950dadf841 --- /dev/null +++ b/keyboards/clueboard/keymaps/xyverz/Makefile @@ -0,0 +1,49 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Build Options +# change to "no" to disable the options, or define them in the makefile.mk in +# the appropriate keymap folder that will get included automatically +# +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/clueboard/keymaps/xyverz/keymap.c b/keyboards/clueboard/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..4539119731 --- /dev/null +++ b/keyboards/clueboard/keymaps/xyverz/keymap.c @@ -0,0 +1,111 @@ +// Xyverz' keymap. +// It's based on the default keymap, but Dvorak! + +#include "clueboard.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RS 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,--------------------------------------------------------------------------. ,----. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]| \| BS| |PGUP| + * |--------------------------------------------------------------------------| |----| + * | Tab| '| ,| .| P| Y| F| G| C| R| L| /| =| \| |PGDN| + * |--------------------------------------------------------------------------| `----' + * |_FL/Caps| A| O| E| U| I| H| D| H| T| N| S| - | Ent| + * |-----------------------------------------------------------------------------. + * |Shift| BS| ;| Q| J| K| X| B| M| W| V| Z| BS|Shift| UP| + * |------------------------------------------------------------------------|----|----. + * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| + * `----------------------------------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, KC_PGDN, \ + LT(_FL, KC_CAPS), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_RO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,--------------------------------------------------------------------------. ,----. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| + * |--------------------------------------------------------------------------| |----| + * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | |PGUP| + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL|HOME|PGDN| END| + * `----------------------------------------------------------------------------------' + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, MO(_RS), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _RS: Reset layer + * ,--------------------------------------------------------------------------. ,----. + * | | | | | | | | | | | | | | | RGB| |VAL+| + * |--------------------------------------------------------------------------| |----| + * | | | | |RESET| | | | | | | | | | |VAL-| + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | |SAT+| + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL|HUE-|SAT-|HUE+| + * `----------------------------------------------------------------------------------' + */ +[_RS] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \ + KC_TRNS, KC_TRNS, MO(_RS), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI), +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/ergodox/config.h b/keyboards/ergodox/config.h index 3618598320..994a8c6433 100644 --- a/keyboards/ergodox/config.h +++ b/keyboards/ergodox/config.h @@ -34,4 +34,4 @@ #endif -#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */
\ No newline at end of file +#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */ diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index e4f95c302c..a3347de45e 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -49,6 +49,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_SAT_STEP 255 #define RGBLIGHT_VAL_STEP 12 +/* fix space cadet rollover issue */ +#define DISABLE_SPACE_CADET_ROLLOVER + // #define RGB_MIDI #define RGBW_BB_TWI diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk index 64b2db8158..6cd1c0c4f7 100644 --- a/keyboards/ergodox/ez/rules.mk +++ b/keyboards/ergodox/ez/rules.mk @@ -74,7 +74,3 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 SLEEP_LED_ENABLE = no API_SYSEX_ENABLE ?= no RGBLIGHT_ENABLE ?= yes - -ifndef QUANTUM_DIR - include ../../../Makefile -endif diff --git a/keyboards/ergodox/infinity/Makefile b/keyboards/ergodox/infinity/Makefile index 191c6bb664..bd09e5885d 100644 --- a/keyboards/ergodox/infinity/Makefile +++ b/keyboards/ergodox/infinity/Makefile @@ -1,3 +1,3 @@ ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif
\ No newline at end of file +endif diff --git a/keyboards/ergodox/infinity/animations.c b/keyboards/ergodox/infinity/animations.c new file mode 100644 index 0000000000..4c9f6d9c85 --- /dev/null +++ b/keyboards/ergodox/infinity/animations.c @@ -0,0 +1,107 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#if defined(VISUALIZER_ENABLE) + +#include "animations.h" +#include "visualizer.h" +#ifdef LCD_ENABLE +#include "lcd_keyframes.h" +#endif +#ifdef LCD_BACKLIGHT_ENABLE +#include "lcd_backlight_keyframes.h" +#endif + +#ifdef LED_ENABLE +#include "led_keyframes.h" +#endif + +#include "visualizer_keyframes.h" + + +#if defined(LCD_ENABLE) && defined(LCD_BACKLIGHT_ENABLE) + +// Don't worry, if the startup animation is long, you can use the keyboard like normal +// during that time +keyframe_animation_t default_startup_animation = { + .num_frames = 4, + .loop = false, + .frame_lengths = {0, 0, 0, gfxMillisecondsToTicks(5000), 0}, + .frame_functions = { + lcd_keyframe_enable, + backlight_keyframe_enable, + lcd_keyframe_draw_logo, + backlight_keyframe_animate_color, + }, +}; + +keyframe_animation_t default_suspend_animation = { + .num_frames = 4, + .loop = false, + .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0, 0}, + .frame_functions = { + lcd_keyframe_display_layer_text, + backlight_keyframe_animate_color, + lcd_keyframe_disable, + backlight_keyframe_disable, + }, +}; +#endif + +#if defined(LED_ENABLE) +#define CROSSFADE_TIME 1000 +#define GRADIENT_TIME 3000 + +keyframe_animation_t led_test_animation = { + .num_frames = 14, + .loop = true, + .frame_lengths = { + gfxMillisecondsToTicks(1000), // fade in + gfxMillisecondsToTicks(1000), // no op (leds on) + gfxMillisecondsToTicks(1000), // fade out + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom + 0, // mirror leds + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom + 0, // normal leds + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + + }, + .frame_functions = { + led_keyframe_fade_in_all, + keyframe_no_operation, + led_keyframe_fade_out_all, + led_keyframe_crossfade, + led_keyframe_left_to_right_gradient, + led_keyframe_crossfade, + led_keyframe_top_to_bottom_gradient, + led_keyframe_mirror_orientation, + led_keyframe_crossfade, + led_keyframe_left_to_right_gradient, + led_keyframe_crossfade, + led_keyframe_top_to_bottom_gradient, + led_keyframe_normal_orientation, + led_keyframe_crossfade, + }, +}; +#endif + +#endif diff --git a/keyboards/ergodox/infinity/animations.h b/keyboards/ergodox/infinity/animations.h new file mode 100644 index 0000000000..6d8b9830d9 --- /dev/null +++ b/keyboards/ergodox/infinity/animations.h @@ -0,0 +1,30 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ +#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ + +#include "visualizer.h" + +// You can use these default animations, but of course you can also write your own custom ones instead +extern keyframe_animation_t default_startup_animation; +extern keyframe_animation_t default_suspend_animation; + +// An animation for testing and demonstrating the led support, should probably not be used for real world +// cases +extern keyframe_animation_t led_test_animation; + +#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */ diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h index 9e264083be..95f713819e 100644 --- a/keyboards/ergodox/infinity/config.h +++ b/keyboards/ergodox/infinity/config.h @@ -40,7 +40,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 -#define LED_BRIGHTNESS_LO 15 +#define LED_BRIGHTNESS_LO 100 #define LED_BRIGHTNESS_HI 255 /* define if matrix has ghost */ @@ -54,6 +54,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // The visualizer needs gfx thread priorities #define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) +#define VISUALIZER_USER_DATA_SIZE 16 + /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c index 1d21f0c498..ea09c4bb0c 100644 --- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c +++ b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c @@ -25,6 +25,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "board_IS31FL3731C.h" + +// Can't include led_tables from here +extern const uint8_t CIE1931_CURVE[]; + /*===========================================================================*/ /* Driver local definitions. */ /*===========================================================================*/ @@ -100,37 +104,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define IS31 -//Generated by http://jared.geek.nz/2013/feb/linear-led-pwm -const unsigned char cie[256] = { - 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, - 3, 4, 4, 4, 4, 4, 4, 5, 5, 5, - 5, 5, 6, 6, 6, 6, 6, 7, 7, 7, - 7, 8, 8, 8, 8, 9, 9, 9, 10, 10, - 10, 10, 11, 11, 11, 12, 12, 12, 13, 13, - 13, 14, 14, 15, 15, 15, 16, 16, 17, 17, - 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, - 22, 23, 23, 24, 24, 25, 25, 26, 26, 27, - 28, 28, 29, 29, 30, 31, 31, 32, 32, 33, - 34, 34, 35, 36, 37, 37, 38, 39, 39, 40, - 41, 42, 43, 43, 44, 45, 46, 47, 47, 48, - 49, 50, 51, 52, 53, 54, 54, 55, 56, 57, - 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, - 68, 70, 71, 72, 73, 74, 75, 76, 77, 79, - 80, 81, 82, 83, 85, 86, 87, 88, 90, 91, - 92, 94, 95, 96, 98, 99, 100, 102, 103, 105, - 106, 108, 109, 110, 112, 113, 115, 116, 118, 120, - 121, 123, 124, 126, 128, 129, 131, 132, 134, 136, - 138, 139, 141, 143, 145, 146, 148, 150, 152, 154, - 155, 157, 159, 161, 163, 165, 167, 169, 171, 173, - 175, 177, 179, 181, 183, 185, 187, 189, 191, 193, - 196, 198, 200, 202, 204, 207, 209, 211, 214, 216, - 218, 220, 223, 225, 228, 230, 232, 235, 237, 240, - 242, 245, 247, 250, 252, 255, -}; - - /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ @@ -231,7 +204,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { uint8_t* src = PRIV(g)->frame_buffer; for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) { for (int x=0;x<GDISP_SCREEN_WIDTH;x++) { - PRIV(g)->write_buffer[get_led_address(g, x, y)]=cie[*src]; + PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[*src]; ++src; } } diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h index 290571ce5b..e8c17e6e33 100644 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h @@ -8,8 +8,6 @@ #ifndef _GDISP_LLD_BOARD_H #define _GDISP_LLD_BOARD_H -#include "print.h" - #define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 #define ST7565_ADC ST7565_ADC_NORMAL #define ST7565_COM_SCAN ST7565_COM_SCAN_DEC @@ -39,35 +37,49 @@ // MSB First // CLK Low by default static const SPIConfig spi1config = { - NULL, - /* HW dependent part.*/ - ST7565_GPIOPORT, - ST7565_SS_PIN, - SPIx_CTARn_FMSZ(7) - | SPIx_CTARn_ASC(7) - | SPIx_CTARn_DT(7) - | SPIx_CTARn_CSSCK(7) - | SPIx_CTARn_PBR(0) - | SPIx_CTARn_BR(7) - //SPI_CR1_BR_0 + // Operation complete callback or @p NULL. + .end_cb = NULL, + //The chip select line port - when not using pcs. + .ssport = ST7565_GPIOPORT, + // brief The chip select line pad number - when not using pcs. + .sspad=ST7565_SS_PIN, + // SPI initialization data. + .tar0 = + SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes + | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns + | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns + | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns + | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 + | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns }; -static bool_t st7565_is_data_mode = 1; +static GFXINLINE void acquire_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to acquire + // spiAcquireBus(&SPID1); + spiSelect(&SPID1); +} + +static GFXINLINE void release_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to release + //spiReleaseBus(&SPID1); + spiUnselect(&SPID1); +} static GFXINLINE void init_board(GDisplay *g) { (void) g; palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); - st7565_is_data_mode = 1; palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); palSetPadModeRaw(MOSI, ST7565_SPI_MODE); palSetPadModeRaw(SLCK, ST7565_SPI_MODE); - palSetPadModeRaw(SS, ST7565_SPI_MODE); + palSetPadModeRaw(SS, PAL_MODE_OUTPUT_PUSHPULL); spiInit(); spiStart(&SPID1, &spi1config); - spiSelect(&SPID1); + release_bus(g); } static GFXINLINE void post_init_board(GDisplay *g) { @@ -84,43 +96,17 @@ static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { } } -static GFXINLINE void acquire_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); +static GFXINLINE void enter_data_mode(GDisplay *g) { + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); } -static GFXINLINE void release_bus(GDisplay *g) { - (void) g; - // Only the LCD is using the SPI bus, so no need to release - //spiReleaseBus(&SPID1); +static GFXINLINE void enter_cmd_mode(GDisplay *g) { + palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); } -static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { - (void) g; - if (st7565_is_data_mode) { - // The sleeps need to be at lest 10 vs 25 ns respectively - // So let's sleep two ticks, one tick might not be enough - // if we are at the end of the tick - chThdSleep(2); - palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); - chThdSleep(2); - st7565_is_data_mode = 0; - } - spiSend(&SPID1, 1, &cmd); -} static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { (void) g; - if (!st7565_is_data_mode) { - // The sleeps need to be at lest 10 vs 25 ns respectively - // So let's sleep two ticks, one tick might not be enough - // if we are at the end of the tick - chThdSleep(2); - palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); - chThdSleep(2); - st7565_is_data_mode = 1; - } spiSend(&SPID1, length, data); } diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c index c33aea81a8..b04ad02935 100644 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c @@ -20,16 +20,16 @@ /*===========================================================================*/ #ifndef GDISP_SCREEN_HEIGHT - #define GDISP_SCREEN_HEIGHT 32 +#define GDISP_SCREEN_HEIGHT 32 #endif #ifndef GDISP_SCREEN_WIDTH - #define GDISP_SCREEN_WIDTH 128 +#define GDISP_SCREEN_WIDTH 128 #endif #ifndef GDISP_INITIAL_CONTRAST - #define GDISP_INITIAL_CONTRAST 0 +#define GDISP_INITIAL_CONTRAST 35 #endif #ifndef GDISP_INITIAL_BACKLIGHT - #define GDISP_INITIAL_BACKLIGHT 100 +#define GDISP_INITIAL_BACKLIGHT 100 #endif #define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) @@ -40,16 +40,16 @@ /* Driver config defaults for backward compatibility. */ /*===========================================================================*/ #ifndef ST7565_LCD_BIAS - #define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 +#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 #endif #ifndef ST7565_ADC - #define ST7565_ADC ST7565_ADC_NORMAL +#define ST7565_ADC ST7565_ADC_NORMAL #endif #ifndef ST7565_COM_SCAN - #define ST7565_COM_SCAN ST7565_COM_SCAN_INC +#define ST7565_COM_SCAN ST7565_COM_SCAN_INC #endif #ifndef ST7565_PAGE_ORDER - #define ST7565_PAGE_ORDER 0,1,2,3 +#define ST7565_PAGE_ORDER 0,1,2,3 #endif /*===========================================================================*/ @@ -58,12 +58,24 @@ typedef struct{ bool_t buffer2; + uint8_t data_pos; + uint8_t data[16]; uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; }PrivData; // Some common routines and macros #define PRIV(g) ((PrivData*)g->priv) #define RAM(g) (PRIV(g)->ram) + +static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) { + PRIV(g)->data[PRIV(g)->data_pos++] = cmd; +} + +static GFXINLINE void flush_cmd(GDisplay* g) { + write_data(g, PRIV(g)->data, PRIV(g)->data_pos); + PRIV(g)->data_pos = 0; +} + #define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } #define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } @@ -86,207 +98,232 @@ typedef struct{ */ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - PRIV(g)->buffer2 = false; - - // Initialise the board interface - init_board(g); - - // Hardware reset - setpin_reset(g, TRUE); - gfxSleepMilliseconds(20); - setpin_reset(g, FALSE); - gfxSleepMilliseconds(20); - - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_OFF); - write_cmd(g, ST7565_LCD_BIAS); + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + PRIV(g)->buffer2 = false; + PRIV(g)->data_pos = 0; + + // Initialise the board interface + init_board(g); + + // Hardware reset + setpin_reset(g, TRUE); + gfxSleepMilliseconds(20); + setpin_reset(g, FALSE); + gfxSleepMilliseconds(20); + acquire_bus(g); + enter_cmd_mode(g); + + write_cmd(g, ST7565_RESET); + write_cmd(g, ST7565_LCD_BIAS); write_cmd(g, ST7565_ADC); write_cmd(g, ST7565_COM_SCAN); - - write_cmd(g, ST7565_START_LINE | 0); - - write_cmd(g, ST7565_RESISTOR_RATIO | 0x6); - - // turn on voltage converter (VC=1, VR=0, VF=0) - write_cmd(g, ST7565_POWER_CONTROL | 0x04); - delay_ms(50); - // turn on voltage regulator (VC=1, VR=1, VF=0) - write_cmd(g, ST7565_POWER_CONTROL | 0x06); - delay_ms(50); + write_cmd(g, ST7565_RESISTOR_RATIO | 0x1); + write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST); - // turn on voltage follower (VC=1, VR=1, VF=1) - write_cmd(g, ST7565_POWER_CONTROL | 0x07); - delay_ms(50); + // turn on internal power supply (VC=1, VR=1, VF=1) + write_cmd(g, ST7565_POWER_CONTROL | 0x07); - write_cmd(g, 0xE2); - write_cmd(g, ST7565_COM_SCAN); - write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101); - //write_cmd2(g, ST7565_CONTRAST, 0); - write_cmd(g, ST7565_DISPLAY_ON); - write_cmd(g, ST7565_ALLON_NORMAL); - write_cmd(g, ST7565_INVERT_DISPLAY); + write_cmd(g, ST7565_INVERT_DISPLAY); + write_cmd(g, ST7565_ALLON_NORMAL); - write_cmd(g, ST7565_RMW); + write_cmd(g, ST7565_START_LINE | 0); + write_cmd(g, ST7565_RMW); + flush_cmd(g); // Finish Init post_init_board(g); - // Release the bus - release_bus(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOn; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; + // Release the bus + release_bus(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOff; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; } #if GDISP_HARDWARE_FLUSH - LLDSPEC void gdisp_lld_flush(GDisplay *g) { - unsigned p; - - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) - return; - - acquire_bus(g); - unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); - for (p = 0; p < 4; p++) { - write_cmd(g, ST7565_PAGE | (p + dstOffset)); - write_cmd(g, ST7565_COLUMN_MSB | 0); - write_cmd(g, ST7565_COLUMN_LSB | 0); - write_cmd(g, ST7565_RMW); - write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); - } - unsigned line = (PRIV(g)->buffer2 ? 32 : 0); - write_cmd(g, ST7565_START_LINE | line); - PRIV(g)->buffer2 = !PRIV(g)->buffer2; - release_bus(g); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; - } +LLDSPEC void gdisp_lld_flush(GDisplay *g) { + unsigned p; + + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + acquire_bus(g); + enter_cmd_mode(g); + unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); + for (p = 0; p < 4; p++) { + write_cmd(g, ST7565_PAGE | (p + dstOffset)); + write_cmd(g, ST7565_COLUMN_MSB | 0); + write_cmd(g, ST7565_COLUMN_LSB | 0); + write_cmd(g, ST7565_RMW); + flush_cmd(g); + enter_data_mode(g); + write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); + enter_cmd_mode(g); + } + unsigned line = (PRIV(g)->buffer2 ? 32 : 0); + write_cmd(g, ST7565_START_LINE | line); + flush_cmd(g); + PRIV(g)->buffer2 = !PRIV(g)->buffer2; + release_bus(g); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; +} #endif #if GDISP_HARDWARE_DRAWPIXEL - LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - if (gdispColor2Native(g->p.color) != Black) - RAM(g)[xyaddr(x, y)] |= xybit(y); - else - RAM(g)[xyaddr(x, y)] &= ~xybit(y); - g->flags |= GDISP_FLG_NEEDFLUSH; - } +LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + if (gdispColor2Native(g->p.color) != Black) + RAM(g)[xyaddr(x, y)] |= xybit(y); + else + RAM(g)[xyaddr(x, y)] &= ~xybit(y); + g->flags |= GDISP_FLG_NEEDFLUSH; +} #endif #if GDISP_HARDWARE_PIXELREAD - LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch(g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT-1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH-1 - g->p.x; - y = GDISP_SCREEN_HEIGHT-1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT-1 - g->p.y; - y = g->p.x; - break; - } - return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; - } +LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; +} #endif +LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { + uint8_t* buffer = (uint8_t*)g->p.ptr; + int linelength = g->p.cx; + for (int i = 0; i < g->p.cy; i++) { + unsigned dstx = g->p.x; + unsigned dsty = g->p.y + i; + unsigned srcx = g->p.x1; + unsigned srcy = g->p.y1 + i; + unsigned srcbit = srcy * g->p.x2 + srcx; + for(int j=0; j < linelength; j++) { + uint8_t src = buffer[srcbit / 8]; + uint8_t bit = 7-(srcbit % 8); + uint8_t bitset = (src >> bit) & 1; + uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]); + if (bitset) { + *dst |= xybit(dsty); + } + else { + *dst &= ~xybit(dsty); + } + dstx++; + srcbit++; + } + } + g->flags |= GDISP_FLG_NEEDFLUSH; +} + #if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL - LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch(g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) - return; - switch((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_OFF); - release_bus(g); - break; - case powerOn: - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_ON); - release_bus(g); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) - return; - switch((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_CONTRAST: - if ((unsigned)g->p.ptr > 100) - g->p.ptr = (void *)100; - acquire_bus(g); - write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F); - release_bus(g); - g->g.Contrast = (unsigned)g->p.ptr; - return; - } - } +LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + acquire_bus(g); + enter_cmd_mode(g); + write_cmd(g, ST7565_DISPLAY_OFF); + flush_cmd(g); + release_bus(g); + break; + case powerOn: + acquire_bus(g); + enter_cmd_mode(g); + write_cmd(g, ST7565_DISPLAY_ON); + flush_cmd(g); + release_bus(g); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_CONTRAST: + g->g.Contrast = (unsigned)g->p.ptr & 63; + acquire_bus(g); + enter_cmd_mode(g); + write_cmd2(g, ST7565_CONTRAST, g->g.Contrast); + flush_cmd(g); + release_bus(g); + return; + } +} #endif // GDISP_NEED_CONTROL #endif // GFX_USE_GDISP diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h index 48587b9e14..2b66a877c8 100644 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h @@ -14,12 +14,13 @@ /* Driver hardware support. */ /*===========================================================================*/ -#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing -#define GDISP_HARDWARE_DRAWPIXEL TRUE -#define GDISP_HARDWARE_PIXELREAD TRUE -#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_HARDWARE_BITFILLS TRUE -#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO #endif /* GFX_USE_GDISP */ diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h index 48636b33d6..24924ff050 100644 --- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h +++ b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h @@ -34,4 +34,6 @@ #define ST7565_RESISTOR_RATIO 0x20 #define ST7565_POWER_CONTROL 0x28 +#define ST7565_RESET 0xE2 + #endif /* _ST7565_H */ diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h index 8caa577b73..45b9f58580 100644 --- a/keyboards/ergodox/infinity/gfxconf.h +++ b/keyboards/ergodox/infinity/gfxconf.h @@ -143,7 +143,7 @@ #define GDISP_HARDWARE_DRAWPIXEL TRUE #define GDISP_HARDWARE_CLEARS FALSE #define GDISP_HARDWARE_FILLS FALSE - #define GDISP_HARDWARE_BITFILLS FALSE + //#define GDISP_HARDWARE_BITFILLS FALSE #define GDISP_HARDWARE_SCROLL FALSE #define GDISP_HARDWARE_PIXELREAD TRUE #define GDISP_HARDWARE_CONTROL TRUE diff --git a/keyboards/ergodox/infinity/infinity.c b/keyboards/ergodox/infinity/infinity.c index 02db67eaf2..62259ed3f6 100644 --- a/keyboards/ergodox/infinity/infinity.c +++ b/keyboards/ergodox/infinity/infinity.c @@ -70,10 +70,33 @@ void lcd_backlight_hal_init(void) { RGB_PORT->PCR[BLUE_PIN] = RGB_MODE; } +static uint16_t cie_lightness(uint16_t v) { + // The CIE 1931 formula for lightness + // Y = luminance (output) 0-1 + // L = lightness input 0 - 100 + + // Y = (L* / 902.3) if L* <= 8 + // Y = ((L* + 16) / 116)^3 if L* > 8 + + float l = 100.0f * (v / 65535.0f); + float y = 0.0f; + if (l <= 8.0f) { + y = l / 902.3; + } + else { + y = ((l + 16.0f) / 116.0f); + y = y * y * y; + if (y > 1.0f) { + y = 1.0f; + } + } + return y * 65535.0f; +} + void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { - CHANNEL_RED.CnV = r; - CHANNEL_GREEN.CnV = g; - CHANNEL_BLUE.CnV = b; + CHANNEL_RED.CnV = cie_lightness(r); + CHANNEL_GREEN.CnV = cie_lightness(g); + CHANNEL_BLUE.CnV = cie_lightness(b); } __attribute__ ((weak)) @@ -103,34 +126,48 @@ void matrix_scan_kb(void) { matrix_scan_user(); } +__attribute__ ((weak)) void ergodox_board_led_on(void){ } +__attribute__ ((weak)) void ergodox_right_led_1_on(void){ } +__attribute__ ((weak)) void ergodox_right_led_2_on(void){ } +__attribute__ ((weak)) void ergodox_right_led_3_on(void){ } -void ergodox_right_led_on(uint8_t led){ -} - +__attribute__ ((weak)) void ergodox_board_led_off(void){ } +__attribute__ ((weak)) void ergodox_right_led_1_off(void){ } +__attribute__ ((weak)) void ergodox_right_led_2_off(void){ } +__attribute__ ((weak)) void ergodox_right_led_3_off(void){ } -void ergodox_right_led_off(uint8_t led){ +__attribute__ ((weak)) +void ergodox_right_led_1_set(uint8_t n) { +} + +__attribute__ ((weak)) +void ergodox_right_led_2_set(uint8_t n) { +} + +__attribute__ ((weak)) +void ergodox_right_led_3_set(uint8_t n) { } #ifdef ONEHAND_ENABLE diff --git a/keyboards/ergodox/infinity/infinity.h b/keyboards/ergodox/infinity/infinity.h index fec9e565cd..73a0f4bf70 100644 --- a/keyboards/ergodox/infinity/infinity.h +++ b/keyboards/ergodox/infinity/infinity.h @@ -7,13 +7,38 @@ void ergodox_board_led_on(void); void ergodox_right_led_1_on(void); void ergodox_right_led_2_on(void); void ergodox_right_led_3_on(void); -void ergodox_right_led_on(uint8_t led); + +inline void ergodox_right_led_on(uint8_t led) { + switch (led) { + case 0: + ergodox_right_led_1_on(); + break; + case 1: + ergodox_right_led_2_on(); + break; + case 2: + ergodox_right_led_3_on(); + break; + } +} void ergodox_board_led_off(void); void ergodox_right_led_1_off(void); void ergodox_right_led_2_off(void); void ergodox_right_led_3_off(void); -void ergodox_right_led_off(uint8_t led); +inline void ergodox_right_led_off(uint8_t led) { + switch (led) { + case 0: + ergodox_right_led_1_off(); + break; + case 1: + ergodox_right_led_2_off(); + break; + case 2: + ergodox_right_led_3_off(); + break; + } +} inline void ergodox_led_all_on(void) { @@ -31,36 +56,22 @@ inline void ergodox_led_all_off(void) ergodox_right_led_3_off(); } -inline void ergodox_right_led_1_set(uint8_t n){ - if (n) { - ergodox_right_led_1_on(); - } else { - ergodox_right_led_1_off(); - } -} - -inline void ergodox_right_led_2_set(uint8_t n){ - if (n) { - ergodox_right_led_2_on(); - } else { - ergodox_right_led_2_off(); - } -} - -inline void ergodox_right_led_3_set(uint8_t n){ - if (n) { - ergodox_right_led_3_on(); - } else { - ergodox_right_led_3_off(); - } -} +void ergodox_right_led_1_set(uint8_t n); +void ergodox_right_led_2_set(uint8_t n); +void ergodox_right_led_3_set(uint8_t n); inline void ergodox_right_led_set(uint8_t led, uint8_t n){ - if (n) { - ergodox_right_led_on(led); - } else { - ergodox_right_led_off(led); - } + switch (led) { + case 0: + ergodox_right_led_1_set(n); + break; + case 1: + ergodox_right_led_2_set(n); + break; + case 2: + ergodox_right_led_3_set(n); + break; + } } inline void ergodox_led_all_set(uint8_t n) { diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk index 473a6dfec6..9e6170d89a 100644 --- a/keyboards/ergodox/infinity/rules.mk +++ b/keyboards/ergodox/infinity/rules.mk @@ -1,6 +1,7 @@ # project specific files SRC = matrix.c \ - led.c + led.c \ + animations.c ## chip/board settings # - the next two should match the directories in @@ -59,21 +60,17 @@ OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000 # CUSTOM_MATRIX ?= yes # Custom matrix file SERIAL_LINK_ENABLE = yes -VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile +VISUALIZER_ENABLE ?= yes LCD_ENABLE ?= yes -LED_ENABLE ?= yes +LED_ENABLE ?= no LCD_BACKLIGHT_ENABLE ?= yes MIDI_ENABLE = no RGBLIGHT_ENABLE = no -ifndef QUANTUM_DIR - include ../../../Makefile -endif - ifdef LCD_ENABLE include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk endif ifdef LED_ENABLE include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk -endif +endif
\ No newline at end of file diff --git a/keyboards/ergodox/infinity/simple_visualizer.h b/keyboards/ergodox/infinity/simple_visualizer.h new file mode 100644 index 0000000000..ded8a3222e --- /dev/null +++ b/keyboards/ergodox/infinity/simple_visualizer.h @@ -0,0 +1,123 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ +#define KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ + +// Currently we are assuming that both the backlight and LCD are enabled +// But it's entirely possible to write a custom visualizer that use only +// one of them +#ifndef LCD_BACKLIGHT_ENABLE +#error This visualizer needs that LCD backlight is enabled +#endif + +#ifndef LCD_ENABLE +#error This visualizer needs that LCD is enabled +#endif + +#include "visualizer.h" +#include "visualizer_keyframes.h" +#include "lcd_keyframes.h" +#include "lcd_backlight_keyframes.h" +#include "system/serial_link.h" +#include "led.h" +#include "animations.h" + +static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); +static const uint32_t initial_color = LCD_COLOR(0, 0, 0); + +static bool initial_update = true; + +// Feel free to modify the animations below, or even add new ones if needed + +static keyframe_animation_t lcd_layer_display = { + .num_frames = 1, + .loop = false, + .frame_lengths = {gfxMillisecondsToTicks(0)}, + .frame_functions = {lcd_keyframe_display_layer_and_led_states} +}; + +// The color animation animates the LCD color when you change layers +static keyframe_animation_t color_animation = { + .num_frames = 2, + .loop = false, + // Note that there's a 200 ms no-operation frame, + // this prevents the color from changing when activating the layer + // momentarily + .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)}, + .frame_functions = {keyframe_no_operation, backlight_keyframe_animate_color}, +}; + +void initialize_user_visualizer(visualizer_state_t* state) { + // The brightness will be dynamically adjustable in the future + // But for now, change it here. + lcd_backlight_brightness(130); + state->current_lcd_color = initial_color; + state->target_lcd_color = logo_background_color; + initial_update = true; + start_keyframe_animation(&default_startup_animation); +} + + +// This function should be implemented by the keymap visualizer +// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing +// that the simple_visualizer assumes that you are updating +// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is +// stopped. This can be done by either double buffering it or by using constant strings +static void get_visualizer_layer_and_color(visualizer_state_t* state); + +void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { + // Add more tests, change the colors and layer texts here + // Usually you want to check the high bits (higher layers first) + // because that's the order layers are processed for keypresses + // You can for check for example: + // state->status.layer + // state->status.default_layer + // state->status.leds (see led.h for available statuses) + + uint32_t prev_color = state->target_lcd_color; + const char* prev_layer_text = state->layer_text; + + get_visualizer_layer_and_color(state); + + if (initial_update || prev_color != state->target_lcd_color) { + start_keyframe_animation(&color_animation); + } + + if (initial_update || prev_layer_text != state->layer_text) { + start_keyframe_animation(&lcd_layer_display); + } + // You can also stop existing animations, and start your custom ones here + // remember that you should normally have only one animation for the LCD + // and one for the background. But you can also combine them if you want. +} + +void user_visualizer_suspend(visualizer_state_t* state) { + state->layer_text = "Suspending..."; + uint8_t hue = LCD_HUE(state->current_lcd_color); + uint8_t sat = LCD_SAT(state->current_lcd_color); + state->target_lcd_color = LCD_COLOR(hue, sat, 0); + start_keyframe_animation(&default_suspend_animation); +} + +void user_visualizer_resume(visualizer_state_t* state) { + state->current_lcd_color = initial_color; + state->target_lcd_color = logo_background_color; + initial_update = true; + start_keyframe_animation(&default_startup_animation); +} + +#endif /* KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ */ diff --git a/keyboards/ergodox/infinity/visualizer.c b/keyboards/ergodox/infinity/visualizer.c new file mode 100644 index 0000000000..a4b09a34d0 --- /dev/null +++ b/keyboards/ergodox/infinity/visualizer.c @@ -0,0 +1,329 @@ +/* +Copyright 2016 Fred Sundvik <fsundvik@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +// Currently we are assuming that both the backlight and LCD are enabled +// But it's entirely possible to write a custom visualizer that use only +// one of them +#ifndef LCD_BACKLIGHT_ENABLE +#error This visualizer needs that LCD backlight is enabled +#endif + +#ifndef LCD_ENABLE +#error This visualizer needs that LCD is enabled +#endif + +#include "visualizer.h" +#include "visualizer_keyframes.h" +#include "lcd_keyframes.h" +#include "lcd_backlight_keyframes.h" +#include "system/serial_link.h" +#include "animations.h" + +static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); +static const uint32_t initial_color = LCD_COLOR(0, 0, 0); + +static const uint32_t led_emulation_colors[4] = { + LCD_COLOR(0, 0, 0), + LCD_COLOR(255, 255, 255), + LCD_COLOR(84, 255, 255), + LCD_COLOR(168, 255, 255), +}; + +static uint32_t next_led_target_color = 0; + +typedef enum { + LCD_STATE_INITIAL, + LCD_STATE_LAYER_BITMAP, + LCD_STATE_BITMAP_AND_LEDS, +} lcd_state_t; + +static lcd_state_t lcd_state = LCD_STATE_INITIAL; + +typedef struct { + uint8_t led_on; + uint8_t led1; + uint8_t led2; + uint8_t led3; +} visualizer_user_data_t; + +// Don't access from visualization function, use the visualizer state instead +static visualizer_user_data_t user_data_keyboard = { + .led_on = 0, + .led1 = LED_BRIGHTNESS_HI, + .led2 = LED_BRIGHTNESS_HI, + .led3 = LED_BRIGHTNESS_HI, +}; + +_Static_assert(sizeof(visualizer_user_data_t) <= VISUALIZER_USER_DATA_SIZE, + "Please increase the VISUALIZER_USER_DATA_SIZE"); + +// Feel free to modify the animations below, or even add new ones if needed + + +// The color animation animates the LCD color when you change layers +static keyframe_animation_t one_led_color = { + .num_frames = 1, + .loop = false, + .frame_lengths = {gfxMillisecondsToTicks(0)}, + .frame_functions = {backlight_keyframe_set_color}, +}; + +bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) { + uint32_t temp = next_led_target_color; + next_led_target_color = state->target_lcd_color; + state->target_lcd_color = temp; + return false; +} + +// The color animation animates the LCD color when you change layers +static keyframe_animation_t two_led_colors = { + .num_frames = 2, + .loop = true, + .frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)}, + .frame_functions = {backlight_keyframe_set_color, swap_led_target_color}, +}; + +// The LCD animation alternates between the layer name display and a +// bitmap that displays all active layers +static keyframe_animation_t lcd_bitmap_animation = { + .num_frames = 1, + .loop = false, + .frame_lengths = {gfxMillisecondsToTicks(0)}, + .frame_functions = {lcd_keyframe_display_layer_bitmap}, +}; + +static keyframe_animation_t lcd_bitmap_leds_animation = { + .num_frames = 2, + .loop = true, + .frame_lengths = {gfxMillisecondsToTicks(2000), gfxMillisecondsToTicks(2000)}, + .frame_functions = {lcd_keyframe_display_layer_bitmap, lcd_keyframe_display_led_states}, +}; + +void initialize_user_visualizer(visualizer_state_t* state) { + // The brightness will be dynamically adjustable in the future + // But for now, change it here. + lcd_backlight_brightness(130); + state->current_lcd_color = initial_color; + state->target_lcd_color = logo_background_color; + lcd_state = LCD_STATE_INITIAL; + start_keyframe_animation(&default_startup_animation); +} + +inline bool is_led_on(visualizer_user_data_t* user_data, uint8_t num) { + return user_data->led_on & (1u << num); +} + +static uint8_t get_led_index_master(visualizer_user_data_t* user_data) { + for (int i=0; i < 3; i++) { + if (is_led_on(user_data, i)) { + return i + 1; + } + } + return 0; +} + +static uint8_t get_led_index_slave(visualizer_user_data_t* user_data) { + uint8_t master_index = get_led_index_master(user_data); + if (master_index!=0) { + for (int i=master_index; i < 3; i++) { + if (is_led_on(user_data, i)) { + return i + 1; + } + } + } + + return 0; +} + +static uint8_t get_secondary_led_index(visualizer_user_data_t* user_data) { + if (is_led_on(user_data, 0) && + is_led_on(user_data, 1) && + is_led_on(user_data, 2)) { + return 3; + } + return 0; +} + +static uint8_t get_brightness(visualizer_user_data_t* user_data, uint8_t index) { + switch (index) { + case 1: + return user_data->led1; + case 2: + return user_data->led2; + case 3: + return user_data->led3; + } + return 0; +} + +static void update_emulated_leds(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { + visualizer_user_data_t* user_data_new = (visualizer_user_data_t*)state->status.user_data; + visualizer_user_data_t* user_data_old = (visualizer_user_data_t*)prev_status->user_data; + + uint8_t new_index; + uint8_t old_index; + + if (is_serial_link_master()) { + new_index = get_led_index_master(user_data_new); + old_index = get_led_index_master(user_data_old); + } + else { + new_index = get_led_index_slave(user_data_new); + old_index = get_led_index_slave(user_data_old); + } + uint8_t new_secondary_index = get_secondary_led_index(user_data_new); + uint8_t old_secondary_index = get_secondary_led_index(user_data_old); + + uint8_t old_brightness = get_brightness(user_data_old, old_index); + uint8_t new_brightness = get_brightness(user_data_new, new_index); + + uint8_t old_secondary_brightness = get_brightness(user_data_old, old_secondary_index); + uint8_t new_secondary_brightness = get_brightness(user_data_new, new_secondary_index); + + if (lcd_state == LCD_STATE_INITIAL || + new_index != old_index || + new_secondary_index != old_secondary_index || + new_brightness != old_brightness || + new_secondary_brightness != old_secondary_brightness) { + + if (new_secondary_index != 0) { + state->target_lcd_color = change_lcd_color_intensity( + led_emulation_colors[new_index], new_brightness); + next_led_target_color = change_lcd_color_intensity( + led_emulation_colors[new_secondary_index], new_secondary_brightness); + + stop_keyframe_animation(&one_led_color); + start_keyframe_animation(&two_led_colors); + } else { + state->target_lcd_color = change_lcd_color_intensity( + led_emulation_colors[new_index], new_brightness); + stop_keyframe_animation(&two_led_colors); + start_keyframe_animation(&one_led_color); + } + } +} + +static void update_lcd_text(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { + if (state->status.leds) { + if (lcd_state != LCD_STATE_BITMAP_AND_LEDS || + state->status.leds != prev_status->leds || + state->status.layer != prev_status->layer || + state->status.default_layer != prev_status->default_layer) { + + // NOTE: that it doesn't matter if the animation isn't playing, stop will do nothing in that case + stop_keyframe_animation(&lcd_bitmap_animation); + + lcd_state = LCD_STATE_BITMAP_AND_LEDS; + // For information: + // The logic in this function makes sure that this doesn't happen, but if you call start on an + // animation that is already playing it will be restarted. + start_keyframe_animation(&lcd_bitmap_leds_animation); + } + } else { + if (lcd_state != LCD_STATE_LAYER_BITMAP || + state->status.layer != prev_status->layer || + state->status.default_layer != prev_status->default_layer) { + + stop_keyframe_animation(&lcd_bitmap_leds_animation); + + lcd_state = LCD_STATE_LAYER_BITMAP; + start_keyframe_animation(&lcd_bitmap_animation); + } + } +} + +void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { + // Check the status here to start and stop animations + // You might have to save some state, like the current animation here so that you can start the right + // This function is called every time the status changes + + // NOTE that this is called from the visualizer thread, so don't access anything else outside the status + // This is also important because the slave won't have access to the active layer for example outside the + // status. + + update_emulated_leds(state, prev_status); + update_lcd_text(state, prev_status); + +} + +void user_visualizer_suspend(visualizer_state_t* state) { + state->layer_text = "Suspending..."; + uint8_t hue = LCD_HUE(state->current_lcd_color); + uint8_t sat = LCD_SAT(state->current_lcd_color); + state->target_lcd_color = LCD_COLOR(hue, sat, 0); + start_keyframe_animation(&default_suspend_animation); +} + +void user_visualizer_resume(visualizer_state_t* state) { + state->current_lcd_color = initial_color; + state->target_lcd_color = logo_background_color; + lcd_state = LCD_STATE_INITIAL; + start_keyframe_animation(&default_startup_animation); +} + +void ergodox_board_led_on(void){ + // No board led support +} + +void ergodox_right_led_1_on(void){ + user_data_keyboard.led_on |= (1u << 0); + visualizer_set_user_data(&user_data_keyboard); +} + +void ergodox_right_led_2_on(void){ + user_data_keyboard.led_on |= (1u << 1); + visualizer_set_user_data(&user_data_keyboard); +} + +void ergodox_right_led_3_on(void){ + user_data_keyboard.led_on |= (1u << 2); + visualizer_set_user_data(&user_data_keyboard); +} + +void ergodox_board_led_off(void){ + // No board led support +} + +void ergodox_right_led_1_off(void){ + user_data_keyboard.led_on &= ~(1u << 0); + visualizer_set_user_data(&user_data_keyboard); +} + +void ergodox_right_led_2_off(void){ + user_data_keyboard.led_on &= ~(1u << 1); + visualizer_set_user_data(&user_data_keyboard); +} + +void ergodox_right_led_3_off(void){ + user_data_keyboard.led_on &= ~(1u << 2); + visualizer_set_user_data(&user_data_keyboard); +} + +void ergodox_right_led_1_set(uint8_t n) { + user_data_keyboard.led1 = n; + visualizer_set_user_data(&user_data_keyboard); +} + +void ergodox_right_led_2_set(uint8_t n) { + user_data_keyboard.led2 = n; + visualizer_set_user_data(&user_data_keyboard); +} + +void ergodox_right_led_3_set(uint8_t n) { + user_data_keyboard.led3 = n; + visualizer_set_user_data(&user_data_keyboard); +} diff --git a/keyboards/ergodox/keymaps/default/visualizer.c b/keyboards/ergodox/keymaps/default/visualizer.c new file mode 100644 index 0000000000..502e53f3d1 --- /dev/null +++ b/keyboards/ergodox/keymaps/default/visualizer.c @@ -0,0 +1,42 @@ +/* +Copyright 2017 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "simple_visualizer.h" + +// This function should be implemented by the keymap visualizer +// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing +// that the simple_visualizer assumes that you are updating +// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is +// stopped. This can be done by either double buffering it or by using constant strings +static void get_visualizer_layer_and_color(visualizer_state_t* state) { + uint8_t saturation = 60; + if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) { + saturation = 255; + } + if (state->status.layer & 0x4) { + state->target_lcd_color = LCD_COLOR(0, saturation, 0xFF); + state->layer_text = "Media & Mouse"; + } + else if (state->status.layer & 0x2) { + state->target_lcd_color = LCD_COLOR(168, saturation, 0xFF); + state->layer_text = "Symbol"; + } + else { + state->target_lcd_color = LCD_COLOR(84, saturation, 0xFF); + state->layer_text = "Default"; + } +} diff --git a/keyboards/ergodox/keymaps/familiar/README.md b/keyboards/ergodox/keymaps/familiar/README.md new file mode 100644 index 0000000000..e4336d9b55 --- /dev/null +++ b/keyboards/ergodox/keymaps/familiar/README.md @@ -0,0 +1,69 @@ +# ErgoDox Familiar Layout +Familiar layout for those who regularly switch back and forth from ErgoDox to regular QWERTY. + +[](../../../../license_GPLv3.md../../../../license_GPLv3.md) [](https://github.com/RichardLitt/standard-readme) + +## Table of Contents + +- [Background](#background) +- [Install](#install) +- [Usage](#usage) + - [Layers](#layers) +- [Contribute](#contribute) + - [Issues](#issues) +- [License](#license) + +## Background + +This layout is built to be as familiar as possible for users coming directly from a default (QWERTY US) keyboard, while gaining as much advantage as possible from the ErgoDox and QMK featureset. I use an ErgoDoxEZ at home, but I don't have a regular office (CS grad student) so I regularly use either my laptop or a default-setup lab computer; I context switch daily so this layout is meant to reduce the mental overhead as much as possible. + +The default ErgoDoxEZ layout is probably more optimized as a solo daily driver - as are a lot of the others available keymaps. The focus of this layout is to get as much from the 'Dox as possible without overly disrupting long-established muscle memory. + +Key features of the familiar layout: +1. QWERTY default layout. +1. International symbols layer, mapped in the US-International layout default positions, through [UCIS](https://github.com/qmk/qmk_firmware/wiki/Unicode-and-additional-language-support#ucis_enable). +1. Numpad layer on right hand. +1. Thumb cluster holds spacebar, ALT, and access to secondary layers. +1. Function-layer arrow keys in both the first-person-shooter (actually ESDF instead of WASD) and vim (HJKL) locations. + +## Install + +If you are on Windows or Mac, choose the proper line in [`keymap.c`](keymap.c) for [unicode/international character support](https://github.com/qmk/qmk_firmware/wiki/Unicode-and-additional-language-support#ucis_enable) (starts at line 235). +```c +void matrix_init_user(void) { + set_unicode_input_mode(UC_LNX); // Linux + //set_unicode_input_mode(UC_OSX); // Mac OSX + //set_unicode_input_mode(UC_WIN); // Windows (with registry key, see wiki) + //set_unicode_input_mode(UC_WINC); // Windows (with WinCompose, see wiki) +}; +``` + +For instructions on building and installing this keymap, [go to the wiki](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ergodox#build-dependencies). Below is the command for me; it may be different for you. +```sh +$ make ergodox-ez-familiar-teensy +``` + +## Usage + +[](http://www.keyboard-layout-editor.com/#/gists/13508a9f99cff381d58b7be6f7dcc644) + +### Layers +1. Base Layer: QWERTY, with arrow keys at bottom right. +1. UCIS Layer: US-International symbols layer, plus —. Accessed by toggling the `INTL` layer using the UCIS key (bottom of left thumb cluster). +1. UCIS-Shifted Layer: Making shift work for UCIS characters. An ugly workaround. Any ideas? Accessed through holding shift while the UCIS layer is active (toggles the `INSF` layer). +1. Numpad Layer: Right hand number pad. Accessed by toggling the `NUMP` layer using the NPAD key (bottom of right thumb cluster). +1. Function Layer: F1-F12, arrows on ESDF and HJKL, media player controls. Accessed by holding either FN key (center key of each thumb cluster), which toggles the `ARRW` layer. I know, I need to work on my naming conventions. + +## Contribute + +[Contributor Covenant](http://contributor-covenant.org/) + +I'm terrible at this; I have no background in human-computer interaction, kinesiology, or keyboard-ology. Please send comments/issues/pull requests/angry tweets/etc. If you think there is a better way to take advantage of the ErgoDox/QMK comination without straying far from 84/101-key QWERTY, I want to know it. + +### Issues +1. The top two keys of the right thumb cluster are currently unused. I wanted them for screen brightness, but I haven't found a solution I like. +1. The `'`, `"`, `[`, and `]` keys are terrible to access; I want to put them somewhere else but I haven't figured out where. +1. The `INSF` layer is an ugly workaround. I should write a function for doing different things in the `INTL` layer depending on whether SHIFT is being held. Or something. Ideas? + +## License +QMK is licensed ([mostly](https://github.com/qmk/qmk_firmware/issues/1038)) under the [GPLv2](blob/master/license_GPLv2.md). Accordingly, to whatever extent applicable, this keymap is licensed under the [GPLv3](../../../../license_GPLv3.md). diff --git a/keyboards/ergodox/keymaps/familiar/familiar.png b/keyboards/ergodox/keymaps/familiar/familiar.png Binary files differnew file mode 100644 index 0000000000..f8b50e75ec --- /dev/null +++ b/keyboards/ergodox/keymaps/familiar/familiar.png diff --git a/keyboards/ergodox/keymaps/familiar/keymap.c b/keyboards/ergodox/keymaps/familiar/keymap.c new file mode 100644 index 0000000000..c5f94afda8 --- /dev/null +++ b/keyboards/ergodox/keymaps/familiar/keymap.c @@ -0,0 +1,267 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +// Layers +#define BASE 0 // default layer +#define INTL 1 // international symbols +#define INSF 2 // international symbols shifted +#define NUMP 3 // numpad +#define ARRW 4 // function, media, arrow keys + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +/* layer 0 : default + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | | 7 | 8 | 9 | 0 | - | = | BCKSPC | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | TAB | Q | W | E | R | T | HOME | | PGUP | Y | U | I | O | P | DELETE | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | ` | A | S | D | F | G |------| |------| H | J | K | L | ; | ENTER | + * |--------+------+------+------+------+------| END | | PGDN |------+------+------+------+------+--------| + * | (/LSFT | Z | X | C | V | B | | | | N | M | , | . | UP | )/RSFT | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | LCTRL | LGUI | MENU | ' | " | | [ | ] | LEFT | DOWN | RIGHT | + * `------------------------------------' `------------------------------------' + * ,-------------. ,-------------. + * | VOL- | VOL+ | | | | + * ,------|------|------| |------+------+------. + * | SPC/ |SLASH/| MUTE | |NUMLCK|WHACK/| SPC/ | + * | ALT | MO(1)|------| |------|MO(1) | ALT | + * | | | LAY3 | | LAY2 | | | + * `--------------------' `--------------------' + */ +[BASE] = KEYMAP( + // left hand + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_HOME, + KC_GRV, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_END, + KC_LCTL, KC_LGUI, KC_MENU, KC_QUOT, S(KC_QUOT), + KC_VOLD, KC_VOLU, + KC_MUTE, + ALT_T(KC_SPC), LT(ARRW,KC_SLSH), TG(INTL), + // right hand + KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_PGUP, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENTER, + KC_PGDN, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSPC, + KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_RGHT, + _______, _______, + KC_NLCK, + TG(NUMP), LT(ARRW,KC_BSLS), ALT_T(KC_SPC) + ), + +/* layer 1: International symbols, etc + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ´ | ¡ | ² | ³ | ¤ | € | ¼ | | ½ | ¾ | ‘ | ’ | ¥ | × | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ä | å | é | ® | þ | | | | ü | ú | í | ó | ö | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | á | ß | ð | | |------| |------| | | | ø | ¶ | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |MO(INSF)| æ | | © | | | | | | ñ | µ | ç | | |MO(INSF)| + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | ¬ | ¿ | | « | » | | | | + * `------------------------------------' `------------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[INTL] = KEYMAP( + // left hand + UC(0x00B4), UC(0x00A1), UC(0x00B2), UC(0x00B3), UC(0x00A4), UC(0x20AC), UC(0x00BC), + _______, UC(0x00E4), UC(0x00E5), UC(0x00E9), UC(0x00AE), UC(0x00FE), _______, + _______, UC(0x00E1), UC(0x00DF), UC(0x00F0), _______, _______, + MO(INSF), UC(0x00E6), _______, UC(0x00A9), _______, _______, _______, + _______, _______, _______, UC(0x00AC), UC(0x00BF), + _______, _______, + _______, + _______, _______, _______, + // right hand + UC(0x00BD), UC(0x00BE), UC(0x2018), UC(0x2019), UC(0x00A5), UC(0x00D7), _______, + _______, UC(0x00FC), UC(0x00FA), UC(0x00ED), UC(0x00F3), UC(0x00F6), _______, + _______, _______, _______, UC(0x00F8), UC(0x00B6), _______, + _______, UC(0x00F1), UC(0x00B5), UC(0x00E7), _______, _______, MO(INSF), + UC(0x00AB), UC(0x00BB), _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ + ), + +/* layer 2 : international symbols, shifted + * This layer is an ugly workaround; it pretends that SHIFT still works normally on keys + * which don't produce an "upper case" or "shifted" international symobol. + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ¨ | ¹ | | | £ | | | | | | | | — | ÷ | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | Ä | Å | É | | Þ | | | | Ü | Ú | Í | Ó | Ö | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Á | § | Ð | | |------| |------| | | | Ø | ° | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | Æ | | ¢ | | | | | | Ñ | | Ç | | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | ¦ | | | | | | | | + * `------------------------------------' `------------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[INSF] = KEYMAP( + // left hand + UC(0x00A8), UC(0x00B9), _______, _______, UC(0x00A3), _______, _______, + _______, UC(0x00C4), UC(0x00C5), UC(0x00C9), _______, UC(0x00DE), _______, + _______, UC(0x00C1), UC(0x00A7), UC(0x00D0), S(KC_F), S(KC_G), + _______, UC(0x00C6), S(KC_X), UC(0x00A2), S(KC_V), S(KC_B), _______, + _______, _______, _______, UC(0x00A6), _______, + _______, _______, + _______, + _______, _______, _______, + // right hand + _______, _______, _______, _______, UC(0x2014), UC(0x00F7), _______, + _______, UC(0x00DC), UC(0x00DA), UC(0x00CD), UC(0x00D3), UC(0x00D6), _______, + S(KC_H), S(KC_J), S(KC_K), UC(0x00D8), UC(0x00B0), _______, + _______, UC(0x00D1), _______, UC(0x00C7), S(KC_DOT), _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______ + ), + +/* layer 3: numberpad + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | ( | ) | / | * | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | | | | | | | | 7 | 8 | 9 | - | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | |------| |------| | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | 1 | 2 | 3 | = | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | 0 | . | , | ENTER| | + * `------------------------------------' `------------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[NUMP] = KEYMAP( + // left hand + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, + _______, + _______, _______, _______, + // right hand + _______, _______, S(KC_9), S(KC_0), KC_PSLS, KC_PAST, _______, + _______, _______, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, _______, + _______, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, + _______, _______, KC_KP_1, KC_KP_2, KC_KP_3, KC_PEQL, _______, + KC_KP_0, KC_KP_DOT, KC_PCMM, KC_PENT, _______, + _______, _______, + _______, + _______, _______, _______ + ), + +/* layer 4 : functions and arrows + * This layer is at the top so that the functions still work no matter what layers are active. + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ESCAPE | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | SYSREQ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | UP | | | | | | | | | | | INSERT | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * |CAPSLOCK| | LEFT | DOWN |RIGHT | |------| |------| LEFT | DOWN | UP | RIGHT| | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | |M_PREV|M_STOP|M_PLPS|M_NEXT| | | | | | | | | PGUP | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | | HOME | PGDN | END | + * `------------------------------------' `------------------------------------' + * ,-------------. ,-------------. + * | | PAUSE| | | | + * ,------|------|------| |------+------+------. + * | | | | |SCRLK | | | + * | | |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +[ARRW] = KEYMAP( + // left hand + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + _______, _______, _______, KC_UP, _______, _______, _______, + KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, KC_PAUSE, + _______, + _______, _______, _______, + // right hand + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_SYSREQ, + _______, _______, _______, _______, _______, _______, KC_INS, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, + _______, _______, _______, _______, _______, KC_PGUP, _______, + _______, _______, KC_HOME, KC_PGDN, KC_END, + _______, _______, + KC_SLCK, + _______, _______, _______ + ), +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + set_unicode_input_mode(UC_LNX); // Linux + //set_unicode_input_mode(UC_OSX); // Mac OSX + //set_unicode_input_mode(UC_WIN); // Windows (with registry key, see wiki) + //set_unicode_input_mode(UC_WINC); // Windows (with WinCompose, see wiki) +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case INTL: + case INSF: + ergodox_right_led_1_on(); + break; + case NUMP: + ergodox_right_led_2_on(); + break; + case ARRW: + ergodox_right_led_3_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/xyverz/keymap.c b/keyboards/ergodox/keymaps/xyverz/keymap.c index 08ee5aeda5..ec909ec53d 100644 --- a/keyboards/ergodox/keymaps/xyverz/keymap.c +++ b/keyboards/ergodox/keymaps/xyverz/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Layer 0 : Dvorak * ,--------------------------------------------------. ,--------------------------------------------------. - * | ] | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | [ | + * | = | 1 | 2 | 3 | 4 | 5 | ESC | | ESC | 6 | 7 | 8 | 9 | 0 | / | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | Tab | ' | , | . | P | Y | | | | F | G | C | R | L | \ | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| @@ -48,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| * | LShift | ; | Q | J | K | X | | | | B | M | W | V | Z | RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. * | LCTL | LALT | | RALT | RCTL | @@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_DV] = KEYMAP( // left hand - KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, + KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_ESC, KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, XXXXXXX, KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, MO(_MD), @@ -70,11 +70,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_HOME, KC_BSPC, KC_DEL, KC_END, // right hand - KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, + KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SLSH, XXXXXXX, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, MO(_KP), KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, - KC_UP, KC_DOWN, KC_SLSH, KC_EQL, KC_RGUI, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, KC_RGUI, KC_RALT, KC_RCTL, KC_PGUP, KC_PGDN, KC_ENT, KC_SPC @@ -91,7 +91,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| * | LShift | Z | X | C | V | B | | | | N | M | , | . | / | RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. * | LCTL | LALT | | RALT | RCTL | @@ -133,7 +133,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| _MD | | _KP |------+------+------+------+------+--------| * | LShift | Z | X | C | V | B | | | | K | M | , | . | / | RShift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + * | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. * | LCTL | LALT | | RALT | RCTL | diff --git a/keyboards/ergodox/keymaps/xyverz/readme.md b/keyboards/ergodox/keymaps/xyverz/readme.md index 6ecdabc9ed..134fb50afd 100644 --- a/keyboards/ergodox/keymaps/xyverz/readme.md +++ b/keyboards/ergodox/keymaps/xyverz/readme.md @@ -2,7 +2,7 @@ ## About this keymap: -The Dvorak layout shown herestems from my early Kinesis years, using the Contour PS/2 with a Dvorak software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner keys. I've decided to continue using this layout with my ErgoDox. +The Dvorak layout shown here stems from my early Kinesis years, using the Contour PS/2 with a Dvorak software layout. ~~Because of this, the RBRC and LBRC were on opposite sides of the board in the corner keys. I've decided to continue using this layout with my ErgoDox.~~ I've decided do give the normal placing of the SLSH, EQL, and xBRC keys a try, after using a different keyboard for a while... The QWERTY layout shown here is based entirely on the Kinesis Advantage layout, with the additional keys as shown in the diagrams. The Colemak layout is merely an adaptation of that. @@ -17,15 +17,15 @@ I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar t ### Layer 0: Dvorak layer ,--------------------------------------------------.,--------------------------------------------------. - | ] | 1 | 2 | 3 | 4 | 5 | ESC || ESC | 6 | 7 | 8 | 9 | 0 | [ | + | = | 1 | 2 | 3 | 4 | 5 | ESC || ESC | 6 | 7 | 8 | 9 | 0 | / | |--------+------+------+------+------+-------------||------+------+------+------+------+------+--------| - | Tab | ' | , | . | Y | Y | || | F | G | C | R | L | \ | + | Tab | ' | , | . | P | Y | || | F | G | C | R | L | \ | |--------+------+------+------+------+------| || |------+------+------+------+------+--------| | CapsLk | A | O | E | U | I |------||------| D | H | T | N | S | - | |--------+------+------+------+------+------| _MD || _KP |------+------+------+------+------+--------| | LShift | Z | X | C | V | X | || | B | M | W | V | Z | RShift | `--------+------+------+------+------+-------------'`-------------+------+------+------+------+--------' - | LGUI | ` | INS | Left | Rght | | Up | Dn | / | = | RGUI | + | LGUI | ` | INS | Left | Rght | | Up | Dn | [ | ] | RGUI | `----------------------------------' `----------------------------------' ,-------------.,-------------. | LCtr | LAlt || Ralt | RCtr | diff --git a/keyboards/gh60/keymaps/xyverz/keymap.c b/keyboards/gh60/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..e83a7f5a32 --- /dev/null +++ b/keyboards/gh60/keymaps/xyverz/keymap.c @@ -0,0 +1,149 @@ +#include "gh60.h" +#include "action_layer.h" +#include "eeconfig.h" + + +extern keymap_config_t keymap_config; + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QW 0 +#define _DV 1 +#define _CM 2 +#define _FL 3 + +// Macro name shortcuts +#define QWERTY M(_QW) +#define DVORAK M(_DV) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * _QW: Qwerty Layer + * ,-----------------------------------------------------------. + * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Fn | A| S| D| F| G| H| J| K| L| ;| '| Return| + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| + * |-----------------------------------------------------------| + * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| + * `-----------------------------------------------------------' + */ +[_QW] = { /* Layer 0: Qwerty */ + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS}, + {MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT }, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)} + }, + + /* + * _DV: Dvorak Layer + * ,-----------------------------------------------------------. + * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]| Backsp| + * |-----------------------------------------------------------| + * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \| + * |-----------------------------------------------------------| + * |Fn | A| O| E| U| I| D| H| T| N| S| -| Return| + * |-----------------------------------------------------------| + * |Shift | ;| Q| J| K| X| B| M| W| V| Z| Shift| + * |-----------------------------------------------------------| + * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| + * `-----------------------------------------------------------' + */ +[_DV] = { /* Layer 1: Dvorak */ + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC}, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS}, + {MO(_FL), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, XXXXXXX, KC_ENT }, + {KC_LSFT, XXXXXXX, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, XXXXXXX, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)} + }, + + /* + * _CM: Colemak Layer + * ,-----------------------------------------------------------. + * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp| + * |-----------------------------------------------------------| + * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \| + * |-----------------------------------------------------------| + * |Fn | A| R| S| T| D| H| N| E| I| O| '| Return| + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| K| M| ,| .| /| Shift| + * |-----------------------------------------------------------| + * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn| + * `-----------------------------------------------------------' + */ +[_CM] = { /* Layer 2: Colemak */ + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS}, + {MO(_FL), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, XXXXXXX, KC_ENT }, + {KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, KC_SPC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)} + }, + + /* + * _FL: Function Layer + * ,-----------------------------------------------------------. + * | |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Del| + * |-----------------------------------------------------------| + * | | | | | | | |PgU| Up|PgD|PSc|SLk|Pau| | + * |-----------------------------------------------------------| + * | | |MPr|MPl|MNx| |Hom| Lt| Dn| Rt| | | | + * |-----------------------------------------------------------| + * |CAPS | |Mut|VlD|VlU| |End| | | | | | + * |-----------------------------------------------------------| + * |_QW |_DV |_CM | | | | | | + * `-----------------------------------------------------------' + */ +[_FL] = { /* Layer 3: Functions */ + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL }, + {_______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______}, + {_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, XXXXXXX, _______}, + {KC_CAPS, XXXXXXX, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_END, _______, _______, _______, _______, XXXXXXX, _______}, + {QWERTY, DVORAK, COLEMAK, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______} + }, + + +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; diff --git a/keyboards/handwired/kbod/Makefile b/keyboards/handwired/kbod/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/handwired/kbod/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h new file mode 100644 index 0000000000..f3d0c8bf2d --- /dev/null +++ b/keyboards/handwired/kbod/config.h @@ -0,0 +1,167 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER fudanchii +#define PRODUCT kbod +#define DESCRIPTION Keyboard of Disapproval + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 } +#define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define PREVENT_STUCK_MODIFIERS + +#undef TAPPING_TOGGLE +#define TAPPING_TOGGLE 2 + +#endif diff --git a/keyboards/handwired/kbod/kbod.c b/keyboards/handwired/kbod/kbod.c new file mode 100644 index 0000000000..9a12cae0d2 --- /dev/null +++ b/keyboards/handwired/kbod/kbod.c @@ -0,0 +1,28 @@ +#include "kbod.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/handwired/kbod/kbod.h b/keyboards/handwired/kbod/kbod.h new file mode 100644 index 0000000000..3560636242 --- /dev/null +++ b/keyboards/handwired/kbod/kbod.h @@ -0,0 +1,21 @@ +#ifndef KBOD_H +#define KBOD_H + +#include "quantum.h" + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, \ + k40, k41, k42, k43, k44, k45, k46, k47 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, { k08, k09, k0A, k0B, k0C, k0D, KC_NO, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, { k18, k19, k1A, k1B, k1C, k1D, KC_NO, k3B }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, { k28, k29, k2A, k2B, k2C, k38, k39, k3A }, \ + { k30, k31, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47 }, \ +} + +#endif diff --git a/keyboards/handwired/kbod/keymaps/default/Makefile b/keyboards/handwired/kbod/keymaps/default/Makefile new file mode 100644 index 0000000000..0d9def930c --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/config.h b/keyboards/handwired/kbod/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c new file mode 100644 index 0000000000..1386b742f5 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -0,0 +1,104 @@ +#include "kbod.h" + +#define _____ KC_TRNS + +#define MODS_PRESSED(btn) (get_mods() & (MOD_BIT(KC_L##btn)|MOD_BIT(KC_R##btn))) + +#define SET_WHETHER(mask, btn1, btn2) \ +if (record->event.pressed) { \ + if (mask) { \ + add_key(btn2); \ + send_keyboard_report(); \ + } else { \ + add_key(btn1); \ + send_keyboard_report(); \ + } \ +} else { \ + if (mask) { \ + del_key(btn2); \ + send_keyboard_report(); \ + } else { \ + del_key(btn1); \ + send_keyboard_report(); \ + } \ +} \ + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP( /* Base */ + F(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT, + TT(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ), + KEYMAP( /* Cursor layer */ + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + TT(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, + TT(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, _____, + _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_END, KC_UP, + _____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT + ), + KEYMAP( /* Keypad layer */ + TO(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_P7, KC_P8, KC_P9, KC_P0, KC_PMNS, KC_PPLS, KC_BSPC, + _____, _____, _____, _____, _____, _____, _____, KC_P4, KC_P5, KC_P6, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P1, KC_P2, KC_P3, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P0, KC_PDOT, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, + _____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 + ), + KEYMAP( /* Multimedia layer */ + TO(0), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____, + _____, _____, KC_WAKE, _____, _____, _____, _____, _____, _____, _____, KC_MSTP, KC_MPRV, KC_MNXT, _____, + _____, _____, KC_SLEP, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, KC_PWR, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, KC_MS_BTN2, + _____, _____, _____, KC_MPLY, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(0), + [1] = ACTION_FUNCTION(1), +}; + + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_mask; + static uint8_t alt_mask; + switch (id) { + case 0: + shift_esc_mask = MODS_PRESSED(SHIFT); + SET_WHETHER(shift_esc_mask, KC_ESC, KC_GRAVE); + break; + case 1: + alt_mask = MODS_PRESSED(ALT); + SET_WHETHER(alt_mask, KC_4, KC_F4); + break; + } +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + return MACRO_NONE; +}; + +void led_set_user(uint8_t usb_led) { + if (usb_led & _BV(USB_LED_CAPS_LOCK)) { + PORTB |= _BV(PB0); + } else { + PORTB &= ~_BV(PB0); + } +} + +void matrix_init_user(void) { + DDRB |= _BV(PB0); + DDRC |= _BV(PC7); +} + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + if (layer) { + PORTC |= _BV(PC7); + } else { + PORTC &= ~_BV(PC7); + } +}
\ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/readme.md b/keyboards/handwired/kbod/keymaps/default/readme.md new file mode 100644 index 0000000000..35c22ec007 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The default keymap for kbod + +This is the default keymap for kbod, + +it consists of a base layer with QWERTY layout, a momentary cursor-layer, and mouse-keys and multimedia layers.
\ No newline at end of file diff --git a/keyboards/handwired/kbod/readme.md b/keyboards/handwired/kbod/readme.md new file mode 100644 index 0000000000..67bf711bee --- /dev/null +++ b/keyboards/handwired/kbod/readme.md @@ -0,0 +1,21 @@ +KBOD keyboard firmware +====================== + +KBOD is a 60% Keyboard kit, hand-wired, with Arduino Micro as its controller. It's utilize 8x8 matrix and has layout similar to GH-60 + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and use ```make handwired-kbod-default``` to generate the .hex file. You may flash it with avrdude + +## Flashing +Something along this line: + +``` +avrdude -p m32u4 -c avr109 -P <COM PORT> -C <avrdude conf file> -e -u flash:w:handwired_kbod_default.hex +``` + +[More info](https://github.com/fudanchii/keyboard_of_disapproval)
\ No newline at end of file diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk new file mode 100644 index 0000000000..4fcd147a9a --- /dev/null +++ b/keyboards/handwired/kbod/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches diff --git a/keyboards/kinesis/keymaps/xyverz/Makefile b/keyboards/kinesis/keymaps/xyverz/Makefile new file mode 100644 index 0000000000..1da780b841 --- /dev/null +++ b/keyboards/kinesis/keymaps/xyverz/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kinesis/keymaps/xyverz/config.h b/keyboards/kinesis/keymaps/xyverz/config.h new file mode 100644 index 0000000000..8893d122e0 --- /dev/null +++ b/keyboards/kinesis/keymaps/xyverz/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif diff --git a/keyboards/kinesis/keymaps/xyverz/keymap.c b/keyboards/kinesis/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..62f47773c7 --- /dev/null +++ b/keyboards/kinesis/keymaps/xyverz/keymap.c @@ -0,0 +1,302 @@ +#include "kinesis.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +#define _DV 0 // Dvorak layer +#define _QW 1 // Qwerty layer +#define _CM 2 // Colemak layer +#define _MD 3 // Media Layer +#define _KP 4 // Keypad Layer + +// Macro name shortcuts +#define DVORAK M(_DV) +#define QWERTY M(_QW) +#define COLEMAK M(_CM) + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +/* + + Function Keys on All Layers (Keypad toggles): + ,-----------------------------------------------------------------. + | ESC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | + `-----------------------------------------------------------------' + ,-----------------------------------------------------------------. + | F9 | F10 | F11 | F12 | PScr | SLck | Paus | Keypad | RESET | + `-----------------------------------------------------------------' + + Dvorak layer: + ,-------------------------------------------.,-------------------------------------------. + | ] | 1 | 2 | 3 | 4 | 5 || 6 | 7 | 8 | 9 | 0 | [ | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Tab | ' | , | . | P | Y || F | G | C | R | L | \ | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | CapsLk | A | O | E | U | I || D | H | T | N | S | - | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | LShift | Z | X | C | V | X || B | M | W | V | Z | RShift | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | ` | INS | Left | Rght | | Up | Dn | / | = | + `---------------------------' `---------------------------' + ,--------------.,--------------. + | LCtl | LAlt || RGUI | RCtl | + ,------|-------|------||------+-------+-------. + | | Del | Home || PgUp | Enter | | + | BkSp | / |------||------| / | Space | + | | Media | End || PgDn | KeyPd | | + `---------------------'`----------------------' + + QWERTY layer: + ,-------------------------------------------.,-------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 || 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Tab | Q | W | E | R | T || Y | U | I | O | P | \ | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | CapsLk | A | S | D | F | G || H | J | K | L | ; | ' | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | LShift | Z | X | C | V | B || N | M | , | . | / | RShift | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | ` | INS | Left | Rght | | Up | Dn | [ | ] | + `---------------------------' `---------------------------' + ,--------------.,--------------. + | LCtl | LAlt || RGUI | RCtl | + ,------|-------|------||------+-------+-------. + | | Del | Home || PgUp | Enter | | + | BkSp | / |------||------| / | Space | + | | Media | End || PgDn | KeyPd | | + `---------------------'`----------------------' + + Colemak layer: + ,-------------------------------------------.,-------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 || 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Tab | Q | W | F | P | G || J | L | U | Y | ; | \ | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | BkSpc | A | R | S | T | D || H | N | E | I | O | ' | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | LShift | Z | X | C | V | B || K | M | , | . | / | RShift | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | ` | INS | Left | Rght | | Up | Dn | [ | ] | + `---------------------------' `---------------------------' + ,--------------.,--------------. + | LCtl | LAlt || RGUI | RCtl | + ,------|-------|------||------+-------+-------. + | | Del | Home || PgUp | Enter | | + | BkSp | / |------||------| / | Space | + | | Media | End || PgDn | KeyPd | | + `---------------------'`----------------------' + + Media layer: + ,-------------------------------------------.,-------------------------------------------. + | F11 | F1 | F2 | F3 | F4 | F5 || F6 | F7 | F8 | F9 | F10 | F12 | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | | | | | | || | | | | | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | | | | | | || | Mute | Vol- | Vol+ | | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | | | | | | || Stop | Prev | Play | Next | Sel | | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | | | | | | | | | | + `---------------------------' `---------------------------' + ,-------------.,-------------. + | | || | | + ,------|------|------||------+------+------. + | | | || | | | + | | |------||------| | | + | | | || | | | + `--------------------'`--------------------' + + Keypad layer: + ,-------------------------------------------.,-------------------------------------------. + | Power | | | | | || | NmLk | KP = | KP / | KP * | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Sleep | | | | | || | KP 7 | KP 8 | KP 9 | KP - | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Wake | |QWERTY|Colemk|Dvorak| || | KP 4 | KP 5 | KP 6 | KP + | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | | | | | | || | KP 1 | KP 2 | KP 3 |KP Ent| | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | | | | | | | | KP . |KP Ent| | + `---------------------------' `----------------------------------' + ,-------------.,-------------. + | | || | | + ,------|------|------||------+------+------. + | | | || | | | + | | |------||------| | KP 0 | + | | | || | | | + `--------------------'`--------------------' +*/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_DV] = KEYMAP( + // Left Hand + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, + KC_RBRC, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, + KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, + KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + // Left Thumb + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, LT(_MD, KC_DEL), KC_END, + + // Right Hand + KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, TG(_KP), RESET, + KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, + KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSLS, + KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + KC_UP, KC_DOWN, KC_SLSH, KC_EQL, + // Right Thumb + KC_RGUI, KC_RCTL, + KC_PGUP, + KC_PGDN, LT(_KP, KC_ENT), KC_SPC + ), + +[_QW] = KEYMAP( + // Left Hand + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, + KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + // Left Thumb + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, LT(_MD, KC_DEL), KC_END, + + // Right Hand + KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, TG(_KP), RESET, + KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL , + KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, + // Right Thumb + KC_RGUI, KC_RCTL, + KC_PGUP, + KC_PGDN, LT(_KP, KC_ENT), KC_SPC + ), + +[_CM] = KEYMAP( + // Left Hand + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, + KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, + KC_GRV, KC_INS, KC_LEFT, KC_RGHT, + // Left Thumb + KC_LCTL, KC_LALT, + KC_HOME, + KC_BSPC, LT(_MD, KC_DEL), KC_END, + + // Right Hand + KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, TG(_KP), RESET, + KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL, + KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, + // Right Thumb + KC_RGUI, KC_RCTL, + KC_PGUP, + KC_PGDN, LT(_KP, KC_ENT), KC_SPC + ), + +[_MD] = KEYMAP( + // Left Hand + _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + // Left Thumb + _______, _______, + _______, + _______, _______, _______, + + // Right Hand + _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, + _______, _______, _______, _______, _______, _______, + _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, + KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_MSEL, _______, + _______, _______, _______, _______, + // Right Thumb + _______, _______, + _______, + _______, _______, _______ + ), + +[_KP] = KEYMAP( + // Left Hand + _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_PWR, _______, _______, _______, _______, _______, + KC_SLEP, _______, _______, _______, _______, _______, + KC_WAKE, _______, QWERTY, COLEMAK, DVORAK, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, + // Left Thumb + _______, _______, + _______, + _______, _______, _______, + + // Right Hand */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_NLCK, KC_PEQL, KC_PSLS, KC_PAST, _______, + _______, KC_P7, KC_P8, KC_P9, KC_PMNS, _______, + _______, KC_P4, KC_P5, KC_P6, KC_PPLS, _______, + _______, KC_P1, KC_P2, KC_P3, KC_PENT, _______, + _______, _______, KC_PDOT, KC_PENT, + // Right Thumb + _______, _______, + _______, + _______, _______, KC_P0 + ) + +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _DV: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DV); + } + break; + case _QW: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QW); + } + break; + case _CM: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_CM); + } + break; + } + return MACRO_NONE; +}; + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; diff --git a/keyboards/kinesis/keymaps/xyverz/readme.md b/keyboards/kinesis/keymaps/xyverz/readme.md new file mode 100644 index 0000000000..a10d7c2ba8 --- /dev/null +++ b/keyboards/kinesis/keymaps/xyverz/readme.md @@ -0,0 +1,128 @@ +# Xyverz's Kinesis Keymap + +## About this keymap: + +The Dvorak layout shown here stems from my early Kinesis years, using the Contour PS/2 with a Dvorak software layout. Because of this, the RBRC and LBRC were on opposite sides of the board in the corner keys. I've decided to continue using this layout with my QMK Kinesis. + +The QWERTY layout shown here is based entirely on the Kinesis Advantage layout. The Colemak layout is merely an adaptation of that. + +I've enabled persistent keymaps for Qwerty, Dvorak and Colemak layers, similar to the default Planck layouts. + +## Still to do: + + * Implement the CapsLock, NumLock, and ScrLck LEDs on the off-chance that I decide to actually solder some to the keyboard. + +### Function Keys on All Layers (keypad toggles): + ,-----------------------------------------------------------------. + | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | + `-----------------------------------------------------------------' + ,-----------------------------------------------------------------. + | F9 | F10 | F11 | F12 | PScr | SLck | Paus | Keypad | Reset | + `-----------------------------------------------------------------' + +### Layer 0: Dvorak layer + + ,-------------------------------------------.,-------------------------------------------. + | ] | 1 | 2 | 3 | 4 | 5 || 6 | 7 | 8 | 9 | 0 | [ | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Tab | ' | , | . | P | Y || F | G | C | R | L | \ | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | CapsLk | A | O | E | U | I || D | H | T | N | S | - | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | LShift | Z | X | C | V | X || B | M | W | V | Z | RShift | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | ` | Ins | Left | Rght | | Up | Dn | / | = | + `---------------------------' `---------------------------' + ,--------------.,--------------. + | LCtl | LAlt || RGUI | RCtl | + ,------|-------|------||------+-------+-------. + | | Del | Home || PgUp | Enter | | + | BkSp | / |------||------| / | Space | + | | Media | End || PgDn | KeyPd | | + `---------------------'`----------------------' + +### Layer 1: QWERTY layer + + ,-------------------------------------------.,-------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 || 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Tab | Q | W | E | R | T || Y | U | I | O | P | \ | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | CapsLk | A | S | D | F | G || H | J | K | L | ; | ' | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | LShift | Z | X | C | V | B || N | M | , | . | / | RShift | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | ` | Ins | Left | Rght | | Up | Dn | [ | ] | + `---------------------------' `---------------------------' + ,--------------.,--------------. + | LCtl | LAlt || RGUI | RCtl | + ,------|-------|------||------+-------+-------. + | | Del | Home || PgUp | Enter | | + | BkSp | / |------||------| / | Space | + | | Media | End || PgDn | KeyPd | | + `---------------------'`----------------------' + +### Keymap 2: Colemak layer + + ,-------------------------------------------.,-------------------------------------------. + | = | 1 | 2 | 3 | 4 | 5 || 6 | 7 | 8 | 9 | 0 | - | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Tab | Q | W | F | P | G || J | L | U | Y | ; | \ | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | BkSpc | A | R | S | T | D || H | N | E | I | O | ' | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | LShift | Z | X | C | V | B || K | M | , | . | / | RShift | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | ` | Ins | Left | Rght | | Up | Dn | [ | ] | + `---------------------------' `---------------------------' + ,--------------.,--------------. + | LCtl | LAlt || RGUI | RCtl | + ,------|-------|------||------+-------+-------. + | | Del | Home || PgUp | Enter | | + | BkSp | / |------||------| / | Space | + | | Media | End || PgDn | KeyPd | | + `---------------------'`----------------------' + +### layer 3 : Media layer + + ,-------------------------------------------.,-------------------------------------------. + | F11 | F1 | F2 | F3 | F4 | F5 || F6 | F7 | F8 | F9 | F10 | F12 | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | | | | | | || | | | | | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | | | | | | || | Mute | Vol- | Vol+ | | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | | | | | | || Stop | Prev | Play | Next | Sel | | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | | | | | | | | | | + `---------------------------' `---------------------------' + ,-------------.,-------------. + | | || | | + ,------|------|------||------+------+------. + | | | || | | | + | | |------||------| | | + | | | || | | | + `--------------------'`--------------------' + + + +### Keymap 4: Keypad layer + + ,-------------------------------------------.,-------------------------------------------. + | Power | | | | | || | NmLk | KP = | KP / | KP * | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Sleep | | | | | || | KP 7 | KP 8 | KP 9 | KP - | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | Wake | |QWERTY|Colemk|Dvorak| || | KP 4 | KP 5 | KP 6 | KP + | | + |--------+------+------+------+------+------||------+------+------+------+------+--------| + | | | | | | || | KP 1 | KP 2 | KP 3 |KP Ent| | + `--------+------+------+------+------+------'`------+------+------+------+------+--------' + | | | | | | | | KP . |KP Ent| | + `---------------------------' `----------------------------------' + ,-------------.,-------------. + | | || | | + ,------|------|------||------+------+------. + | | | || | | | + | | |------||------| | KP 0 | + | | | || | | | + `--------------------'`--------------------' diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h index 353ea368c6..8389ba111d 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/config.h +++ b/keyboards/lets_split/keymaps/OLED_sample/config.h @@ -27,19 +27,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif + #undef RGBLED_NUM #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 6 #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 - - - - -#ifdef SUBPROJECT_rev1 - #include "../../rev1/config.h" -#endif -#ifdef SUBPROJECT_rev2 - #include "../../rev2/config.h" -#endif
\ No newline at end of file diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c index 072b825abe..493ebcd3f2 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c +++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c @@ -6,6 +6,9 @@ #ifdef AUDIO_ENABLE #include "audio.h" #endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif extern keymap_config_t keymap_config; diff --git a/keyboards/lets_split/keymaps/hexwire/config.h b/keyboards/lets_split/keymaps/hexwire/config.h index 9c8c6d7f40..e315d8c0c3 100644 --- a/keyboards/lets_split/keymaps/hexwire/config.h +++ b/keyboards/lets_split/keymaps/hexwire/config.h @@ -20,51 +20,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define TAPPING_TERM 150 -#undef RGBLED_NUM -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - #ifdef SUBPROJECT_rev1 #include "../../rev1/config.h" - #define COMPACT_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ - ) \ - { \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ - { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ - { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ - { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ - } #endif #ifdef SUBPROJECT_rev2 #include "../../rev2/config.h" - #define COMPACT_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ - k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \ - k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \ - k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \ - ) \ - { \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ - { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ - { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ - { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ - } -#endif -#ifdef SUBPROJECT_rev2fliphalf - #include "../../rev2fliphalf/config.h" #endif + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/lets_split/keymaps/hexwire/keymap.c b/keyboards/lets_split/keymaps/hexwire/keymap.c index f8370490d6..fcf3cde758 100644 --- a/keyboards/lets_split/keymaps/hexwire/keymap.c +++ b/keyboards/lets_split/keymaps/hexwire/keymap.c @@ -39,7 +39,7 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = COMPACT_KEYMAP( + [_QWERTY] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_COLEMAK] = COMPACT_KEYMAP( + [_COLEMAK] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -63,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_DVORAK] = COMPACT_KEYMAP( + [_DVORAK] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_LOWER] = COMPACT_KEYMAP( + [_LOWER] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -87,7 +87,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_RAISE] = COMPACT_KEYMAP( + [_RAISE] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -99,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_FN3] = COMPACT_KEYMAP( + [_FN3] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 , //|----+----+----+----+----+----| |----+----+----+----+----+----| diff --git a/keyboards/lets_split/keymaps/xyverz/config.h b/keyboards/lets_split/keymaps/xyverz/config.h new file mode 100644 index 0000000000..1b5be030ec --- /dev/null +++ b/keyboards/lets_split/keymaps/xyverz/config.h @@ -0,0 +1,37 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + + +#define USE_SERIAL + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" + /* RGB Underglow */ + #undef RGBLED_NUM + #define RGBLIGHT_ANIMATIONS + #define RGBLED_NUM 8 +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif diff --git a/keyboards/lets_split/keymaps/xyverz/keymap.c b/keyboards/lets_split/keymaps/xyverz/keymap.c new file mode 100644 index 0000000000..216e946964 --- /dev/null +++ b/keyboards/lets_split/keymaps/xyverz/keymap.c @@ -0,0 +1,191 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Bksp |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP ( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\ + KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Bksp |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP ( \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | / | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | - | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP ( \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, \ + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP ( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, \ + _______, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______ \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP ( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, \ + _______, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______ \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | F11 | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F12 | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | Reset| |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |RGB ON| MODE | HUE+ | HUE- | SAT+ | SAT- | VAL+ | VAL- | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP ( \ + KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12 , \ + _______, RESET, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + +}; + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h index 0de308c7a9..1892bf2cbd 100644 --- a/keyboards/lets_split/lets_split.h +++ b/keyboards/lets_split/lets_split.h @@ -11,6 +11,20 @@ #include "rev2fliphalf.h" #endif +// Used to create a keymap using only KC_ prefixed keys +#define KC_KEYMAP( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + KEYMAP( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + #include "quantum.h" #endif
\ No newline at end of file diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index ecce3f4152..7e5a546022 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -7,6 +7,12 @@ Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards. +## Build Guide + +A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide) + +There is additional information there about flashing and adding RGB underglow. + ## First Time Setup Download or clone the whole firmware and navigate to the keyboards/lets_split directory. Once your dev env is setup, you'll be able to generate the default .hex using: @@ -62,8 +68,7 @@ Apart from diodes and key switches for the keyboard matrix in each half, you will need: * 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. -* 2 TRS sockets -* 1 TRS cable. +* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a @@ -77,7 +82,7 @@ A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and t Wiring ------ -The 3 wires of the TRS cable need to connect GND, VCC, and digital pin 3 (i.e. +The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros. Then wire your key matrix to any of the remaining 17 IO pins of the pro micro diff --git a/keyboards/lets_split/rev1/rev1.h b/keyboards/lets_split/rev1/rev1.h index 4667c9fb09..6bf9f0f038 100644 --- a/keyboards/lets_split/rev1/rev1.h +++ b/keyboards/lets_split/rev1/rev1.h @@ -9,20 +9,20 @@ //void promicro_bootloader_jmp(bool program); #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45 }, \ - { k50, k51, k52, k53, k54, k55 }, \ - { k60, k61, k62, k63, k64, k65 }, \ - { k70, k71, k72, k73, k74, k75 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 } \ } #endif
\ No newline at end of file diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c index 8bfa171d01..20a4c6be1e 100644 --- a/keyboards/lets_split/rev2/rev2.c +++ b/keyboards/lets_split/rev2/rev2.c @@ -37,4 +37,3 @@ void shutdown_user(void) { stop_all_notes(); #endif } - diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h index 054731366e..0c4e8e7de1 100644 --- a/keyboards/lets_split/rev2/rev2.h +++ b/keyboards/lets_split/rev2/rev2.h @@ -10,62 +10,51 @@ #ifdef USE_I2C #include <stddef.h> #ifdef __AVR__ -#include <avr/io.h> -#include <avr/interrupt.h> -#endif -#ifdef SSD1306OLED -extern bool iota_gfx_init(void); -extern void iota_gfx_task(void); -extern bool iota_gfx_off(void); -extern bool iota_gfx_on(void); -extern void iota_gfx_flush(void); -extern void iota_gfx_write_char(uint8_t c); -extern void iota_gfx_write(const char *data); -extern void iota_gfx_write_P(const char *data); -extern void iota_gfx_clear_screen(void); + #include <avr/io.h> + #include <avr/interrupt.h> #endif #endif //void promicro_bootloader_jmp(bool program); #ifndef FLIP_HALF -//Standard Keymap +// Standard Keymap +// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) #define KEYMAP( \ - k40, k41, k42, k43, k44, k45, k05, k04, k03, k02, k01, k00, \ - k50, k51, k52, k53, k54, k55, k15, k14, k13, k12, k11, k10, \ - k60, k61, k62, k63, k64, k65, k25, k24, k23, k22, k21, k20, \ - k70, k71, k72, k73, k74, k75, k35, k34, k33, k32, k31, k30 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k45, k44, k43, k42, k41, k40 }, \ - { k55, k54, k53, k52, k51, k50 }, \ - { k65, k64, k63, k62, k61, k60 }, \ - { k75, k74, k73, k72, k71, k70 }, \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 } \ } - #else -// Keymap with one side flipped +// Keymap with right side flipped +// (TRRS jack on both halves are to the right) #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k45, k44, k43, k42, k41, k40 }, \ - { k55, k54, k53, k52, k51, k50 }, \ - { k65, k64, k63, k62, k61, k60 }, \ - { k75, k74, k73, k72, k71, k70 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 } \ } #endif - -#endif
\ No newline at end of file +#endif diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index ff159e0f06..79860ea35d 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -1,7 +1,7 @@ SRC += matrix.c \ i2c.c \ split_util.c \ - serial.c\ + serial.c \ ssd1306.c # MCU name @@ -74,3 +74,15 @@ USE_I2C ?= yes SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c index 46586fbc00..39639c3b4b 100644 --- a/keyboards/lets_split/split_util.c +++ b/keyboards/lets_split/split_util.c @@ -21,7 +21,7 @@ static void setup_handedness(void) { #ifdef EE_HANDS isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); #else - // I2c_MASTER_RIGHT ish deprecate use MASTER_RIGHT instead since this works for both serial and i2c: + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) isLeftHand = !has_usb(); #else diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c index 3c7816bb32..5c6dff27f8 100644 --- a/keyboards/lets_split/ssd1306.c +++ b/keyboards/lets_split/ssd1306.c @@ -1,8 +1,9 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" #include "config.h" #include "i2c.h" -#include <stdbool.h> #include <string.h> -#include <stdio.h> #include "print.h" #include "lets_split.h" #include "common/glcdfont.c" @@ -466,3 +467,4 @@ void iota_gfx_task(void) { iota_gfx_off(); } } +#endif diff --git a/keyboards/lets_split/ssd1306.h b/keyboards/lets_split/ssd1306.h new file mode 100644 index 0000000000..b0c74f987e --- /dev/null +++ b/keyboards/lets_split/ssd1306.h @@ -0,0 +1,17 @@ +#ifndef SSD1306_H +#define SSD1306_H + +#include <stdbool.h> +#include <stdio.h> + +bool iota_gfx_init(void); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +#endif diff --git a/keyboards/miuni32/Makefile b/keyboards/miuni32/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/miuni32/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h new file mode 100644 index 0000000000..4f9b685518 --- /dev/null +++ b/keyboards/miuni32/config.h @@ -0,0 +1,170 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Bigtuna.io +#define PRODUCT Miuni32 +#define DESCRIPTION A custom keyboard for writers + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F4, D7} +#define MATRIX_COL_PINS { C6, C7, F7, F6, F1, E6, B7, B3, B2, B1, B0} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define RGBLIGHT_TIMER +#define RGB_DI_PIN D0 // The pin your RGB strip is wired to +#define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) +#define RGBLED_NUM 7 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif diff --git a/keyboards/miuni32/keymaps/default/Makefile b/keyboards/miuni32/keymaps/default/Makefile new file mode 100644 index 0000000000..88a3aea741 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/miuni32/keymaps/default/config.h b/keyboards/miuni32/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/miuni32/keymaps/default/keymap.c b/keyboards/miuni32/keymaps/default/keymap.c new file mode 100644 index 0000000000..15e2fa45c0 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +#include "miuni32.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] ={ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_RSFT, KC_ENT}, + {KC_Z, KC_X, KC_C, KC_V, KC_V, KC_SPC, KC_B, KC_N, KC_M , MO(1), KC_RCTL} + }, +[1] ={ + {KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL}, + {KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, KC_TRNS}, + {RGB_TOG, RGB_HUI, RGB_HUD, RGB_SAI, KC_TRNS, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, RGB_MOD}, + } +}; +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/miuni32/keymaps/default/readme.md b/keyboards/miuni32/keymaps/default/readme.md new file mode 100644 index 0000000000..4cff8ef5a3 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for miuni32
\ No newline at end of file diff --git a/keyboards/miuni32/miuni32.c b/keyboards/miuni32/miuni32.c new file mode 100644 index 0000000000..1c1983a564 --- /dev/null +++ b/keyboards/miuni32/miuni32.c @@ -0,0 +1,28 @@ +#include "miuni32.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/miuni32/miuni32.h b/keyboards/miuni32/miuni32.h new file mode 100644 index 0000000000..eecb17f81f --- /dev/null +++ b/keyboards/miuni32/miuni32.h @@ -0,0 +1,15 @@ +#ifndef MIUNI32_H +#define MIUNI32_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A ) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A } \ +} + +#endif diff --git a/keyboards/miuni32/readme.md b/keyboards/miuni32/readme.md new file mode 100644 index 0000000000..36696ddbcb --- /dev/null +++ b/keyboards/miuni32/readme.md @@ -0,0 +1,28 @@ +miuni32 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/miuni32 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk new file mode 100644 index 0000000000..ef8daf3caa --- /dev/null +++ b/keyboards/miuni32/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/planck/keymaps/khord/config.h b/keyboards/planck/keymaps/khord/config.h index 008f3a5c2c..83dece50ea 100644 --- a/keyboards/planck/keymaps/khord/config.h +++ b/keyboards/planck/keymaps/khord/config.h @@ -48,6 +48,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_BREATHING /* Set 0 if debouncing isn't needed */ #define DEBOUNCING_DELAY 5 diff --git a/keyboards/planck/keymaps/khord/keymap.c b/keyboards/planck/keymaps/khord/keymap.c index 8001a0986d..e371e5b70b 100644 --- a/keyboards/planck/keymaps/khord/keymap.c +++ b/keyboards/planck/keymaps/khord/keymap.c @@ -37,6 +37,14 @@ enum planck_keycodes { #define _______ KC_TRNS #define XXXXXXX KC_NO +#define MACRO_BREATH_TOGGLE 21 +#define MACRO_BREATH_SPEED_INC 23 +#define MACRO_BREATH_SPEED_DEC 24 +#define MACRO_BREATH_DEFAULT 25 +#define M_BRTOG M(MACRO_BREATH_TOGGLE) +#define M_BRINC M(MACRO_BREATH_SPEED_INC) +#define M_BRDEC M(MACRO_BREATH_SPEED_DEC) +#define M_BRDFT M(MACRO_BREATH_DEFAULT) // Tap Dance Declarations enum { ESC_CAP = 0, @@ -173,10 +181,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = { - {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, - {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, - {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_A_INS, C_A_DEL} + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, M_BRDFT, KC_DEL }, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, M_BRINC, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, M_BRDEC, C_A_INS}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, M_BRTOG, C_A_DEL} } @@ -210,6 +218,32 @@ void persistant_default_layer_set(uint16_t default_layer) { default_layer_set(default_layer); } +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch(id) { + case MACRO_BREATH_TOGGLE: + if (record->event.pressed) { + breathing_toggle(); + } + break; + case MACRO_BREATH_SPEED_INC: + if (record->event.pressed) { + breathing_speed_inc(1); + } + break; + case MACRO_BREATH_SPEED_DEC: + if (record->event.pressed) { + breathing_speed_dec(1); + } + break; + case MACRO_BREATH_DEFAULT: + if (record->event.pressed) { + breathing_defaults(); + } + break; + } + return MACRO_NONE; +} + bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case QWERTY: diff --git a/keyboards/planck/keymaps/xyverz/Makefile b/keyboards/planck/keymaps/xyverz/Makefile new file mode 100644 index 0000000000..55bf853a07 --- /dev/null +++ b/keyboards/planck/keymaps/xyverz/Makefile @@ -0,0 +1,6 @@ +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/xyverz/keymap.c b/keyboards/planck/keymaps/xyverz/keymap.c index 192933b181..329bb043a5 100644 --- a/keyboards/planck/keymaps/xyverz/keymap.c +++ b/keyboards/planck/keymaps/xyverz/keymap.c @@ -44,14 +44,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | * `-----------------------------------------------------------------------------------' */ [_QWERTY] = { {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, - {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } }, /* Colemak @@ -62,14 +62,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | * `-----------------------------------------------------------------------------------' */ [_COLEMAK] = { {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, - {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } }, /* Dvorak @@ -86,8 +86,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_DVORAK] = { {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, - {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_T(KC_ENT)}, - {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_BSPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } }, /* Lower @@ -128,9 +128,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Adjust (Lower + Raise) * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | + * | F11 | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F12 | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * | | Reset| |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | * |------+------+------+------+------+------|------+------+------+------+------+------| * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -138,8 +138,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = { - {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, - {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12 }, + {_______, RESET, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} } diff --git a/keyboards/planck/keymaps/xyverz/makefile.mk b/keyboards/preonic/keymaps/xyverz/Makefile index 93a89bb4ab..ea5f6c164e 100644 --- a/keyboards/planck/keymaps/xyverz/makefile.mk +++ b/keyboards/preonic/keymaps/xyverz/Makefile @@ -1,25 +1,23 @@ - - # Build Options # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ifndef QUANTUM_DIR include ../../../../Makefile -endif +endif
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/xyverz/config.h b/keyboards/preonic/keymaps/xyverz/config.h new file mode 100644 index 0000000000..4e12921fef --- /dev/null +++ b/keyboards/preonic/keymaps/xyverz/config.h @@ -0,0 +1,21 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// Number of backlight levels +#undef BACKLIGHT_LEVELS +#define BACKLIGHT_LEVELS 3 + +/* ws2812 RGB LED */ +#undef RGB_DI_PIN +#define RGB_DI_PIN B3 +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 11 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + + +#endif
\ No newline at end of file diff --git a/keyboards/preonic/keymaps/xyverz/keymap.c b/keyboards/preonic/keymaps/xyverz/keymap.c index adc7392e5c..c8457cda1f 100644 --- a/keyboards/preonic/keymaps/xyverz/keymap.c +++ b/keyboards/preonic/keymaps/xyverz/keymap.c @@ -14,22 +14,16 @@ #define _DVORAK 2 #define _LOWER 3 #define _RAISE 4 -#define _MUSIC 5 #define _ADJUST 16 -// Macro name shortcuts -#define QWERTY M(_QWERTY) -#define COLEMAK M(_COLEMAK) -#define DVORAK M(_DVORAK) -#define LOWER M(_LOWER) -#define RAISE M(_RAISE) -#define M_BL 5 -#define AUD_OFF M(6) -#define AUD_ON M(7) -#define MUS_OFF M(8) -#define MUS_ON M(9) -#define VC_IN M(10) -#define VC_DE M(11) +enum preonic_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + BACKLIT +}; // Fillers to make layering more clear #define _______ KC_TRNS @@ -47,41 +41,41 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | N | M | , | . | / | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | * `-----------------------------------------------------------------------------------' */ [_QWERTY] = { {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL}, + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL }, {KC_MINS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, - {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_SPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } }, /* Colemak * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | * |------+------+------+------+------+------+------+------+------+------+------+------| * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * | Bksp | A | R | S | T | D | H | N | E | I | O | " | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * | Shift| Z | X | C | V | B | K | M | , | . | / | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | * `-----------------------------------------------------------------------------------' */ [_COLEMAK] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL}, - {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, - {M(M_BL), KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL }, + {KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } }, /* Dvorak * ,-----------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | \ | * |------+------+------+------+------+------+------+------+------+------+------+------| * | Tab | " | , | . | P | Y | F | G | C | R | L | / | * |------+------+------+------+------+-------------+------+------+------+------+------| @@ -89,112 +83,98 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| ; | Q | J | K | X | B | M | W | V | Z | Shift| * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Ctrl | Alt | Left |Right |Lower | Space |Raise | Up | Down | GUI |Enter | + * | Ctrl | Alt | Left |Right |Lower | Bksp |Space |Raise | Up | Down | GUI |Enter | * `-----------------------------------------------------------------------------------' */ [_DVORAK] = { - {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS}, {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH}, {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS}, {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT}, - {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, KC_SPC, KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } + {KC_LCTL, KC_LALT, KC_LEFT, KC_RGHT, LOWER, GUI_T(KC_BSPC), KC_SPC, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_ENT } }, /* Lower * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | * |------+------+------+------+------+------|------+------+------+------+------+------| * | | F7 | F8 | F9 | F10 | F11 | F12 | | Mute | Vol- | Vol+ | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | * `-----------------------------------------------------------------------------------' */ [_LOWER] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, - {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______}, - {M(M_BL), _______, KC_HOME, KC_END, _______, KC_INS, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} + {BACKLIT, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} }, /* Raise * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del | + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | \ | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * | Caps | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | | * |------+------+------+------+------+------|------+------+------+------+------+------| * | | F7 | F8 | F9 | F10 | F11 | F12 | | Prev | Play | Next | | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| | Home | End | | Ins | | PgUp | PgDN | |Enter | + * | Brite| | Home | End | | Del | Ins | | PgUp | PgDN | |Enter | * `-----------------------------------------------------------------------------------' */ [_RAISE] = { - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, - {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, - {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSLS}, + {KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______}, {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______}, - {M(M_BL), _______, KC_HOME, KC_END, _______, KC_INS, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} -}, - -/* Music (reserved for process_action_user) - * - */ -[_MUSIC] = { - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX}, - {XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, LOWER, XXXXXXX, XXXXXXX, RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX} + {BACKLIT, _______, KC_HOME, KC_END, _______, KC_DEL, KC_INS, _______, KC_PGUP, KC_PGDN, _______, _______} }, /* Adjust (Lower + Raise) * ,-----------------------------------------------------------------------------------. * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | Reset| | | | | | | | | | Del | + * | | Reset| | | | | | | | | | | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Audoff|Aud on|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * | | | | | |AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | |Voice-|Voice+|Musoff|Mus on| | | | | | | | + * | |RGB ON| MODE | HUE+ | HUE- | SAT+ | SAT- | VAL+ | VAL- | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ [_ADJUST] = { - {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12}, - {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL}, - {_______, _______, _______, AUD_ON, AUD_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, - {_______, VC_DE, VC_IN, MUS_ON, MUS_OFF, _______, _______, _______, _______, _______, _______, _______}, + {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12 }, + {_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______}, + {_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} } }; -const uint16_t PROGMEM fn_actions[] = { - -}; - #ifdef AUDIO_ENABLE -float start_up[][2] = { - {440.0*pow(2.0,(14)/12.0), 20}, - {440.0*pow(2.0,(26)/12.0), 8}, - {440.0*pow(2.0,(18)/12.0), 20}, - {440.0*pow(2.0,(26)/12.0), 8} +float tone_startup[][2] = { + {NOTE_B5, 20}, + {NOTE_B6, 8}, + {NOTE_DS6, 20}, + {NOTE_B6, 8} }; float tone_qwerty[][2] = SONG(QWERTY_SOUND); float tone_dvorak[][2] = SONG(DVORAK_SOUND); float tone_colemak[][2] = SONG(COLEMAK_SOUND); -float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); -float goodbye[][2] = SONG(GOODBYE_SOUND); +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); + +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); #endif void persistant_default_layer_set(uint16_t default_layer) { @@ -202,34 +182,36 @@ void persistant_default_layer_set(uint16_t default_layer) { default_layer_set(default_layer); } -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case _QWERTY: +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: if (record->event.pressed) { #ifdef AUDIO_ENABLE PLAY_NOTE_ARRAY(tone_qwerty, false, 0); #endif persistant_default_layer_set(1UL<<_QWERTY); } + return false; break; - case _COLEMAK: + case COLEMAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE PLAY_NOTE_ARRAY(tone_colemak, false, 0); #endif persistant_default_layer_set(1UL<<_COLEMAK); } + return false; break; - case _DVORAK: + case DVORAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE PLAY_NOTE_ARRAY(tone_dvorak, false, 0); #endif persistant_default_layer_set(1UL<<_DVORAK); } + return false; break; - case _LOWER: + case LOWER: if (record->event.pressed) { layer_on(_LOWER); update_tri_layer(_LOWER, _RAISE, _ADJUST); @@ -237,8 +219,9 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) layer_off(_LOWER); update_tri_layer(_LOWER, _RAISE, _ADJUST); } + return false; break; - case _RAISE: + case RAISE: if (record->event.pressed) { layer_on(_RAISE); update_tri_layer(_LOWER, _RAISE, _ADJUST); @@ -246,8 +229,9 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) layer_off(_RAISE); update_tri_layer(_LOWER, _RAISE, _ADJUST); } + return false; break; - case M_BL: + case BACKLIT: if (record->event.pressed) { register_code(KC_RSFT); #ifdef BACKLIGHT_ENABLE @@ -256,87 +240,41 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) } else { unregister_code(KC_RSFT); } - break; - case 6: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - audio_off(); - #endif - } - break; - case 7: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - audio_on(); - PLAY_NOTE_ARRAY(start_up, false, 0); - #endif - } - break; - case 8: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - layer_off(_MUSIC); - stop_all_notes(); - #endif - } - break; - case 9: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(music_scale, false, 0); - layer_on(_MUSIC); - #endif - } - break; - case 10: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - voice_iterate(); - PLAY_NOTE_ARRAY(music_scale, false, 0); - #endif - } - break; - case 11: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - voice_deiterate(); - PLAY_NOTE_ARRAY(music_scale, false, 0); - #endif - } - break; + return false; + break; } - return MACRO_NONE; + return true; }; - void matrix_init_user(void) { - #ifdef AUDIO_ENABLE - _delay_ms(20); // gets rid of tick - PLAY_NOTE_ARRAY(start_up, false, 0); - #endif + #ifdef AUDIO_ENABLE + startup_user(); + #endif } #ifdef AUDIO_ENABLE -uint8_t starting_note = 0x0C; -int offset = 7; - -void process_action_user(keyrecord_t *record) { +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} - if (IS_LAYER_ON(_MUSIC)) { - if (record->event.pressed) { - play_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row)), 0xF); - } else { - stop_note(((double)220.0)*pow(2.0, -4.0)*pow(2.0,(starting_note + SCALE[record->event.key.col + offset])/12.0+(MATRIX_ROWS - record->event.key.row))); - } - } +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} +void music_on_user(void) +{ + music_scale_user(); } -void play_goodbye_tone() +void music_scale_user(void) { - PLAY_NOTE_ARRAY(goodbye, false, 0); - _delay_ms(150); + PLAY_NOTE_ARRAY(music_scale, false, 0); } -#endif
\ No newline at end of file +#endif diff --git a/keyboards/preonic/keymaps/xyverz/makefile.mk b/keyboards/preonic/keymaps/xyverz/makefile.mk deleted file mode 100644 index 628167ff66..0000000000 --- a/keyboards/preonic/keymaps/xyverz/makefile.mk +++ /dev/null @@ -1 +0,0 @@ -AUDIO_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/tong92/Makefile b/keyboards/tv44/keymaps/tong92/Makefile new file mode 100644 index 0000000000..e60e3c5c5a --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/tong92/config.h b/keyboards/tv44/keymaps/tong92/config.h new file mode 100644 index 0000000000..be959a823c --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#ifdef BACKLIGHT_ENABLE + #define BACKLIGHT_PIN B2 + #define BACKLIGHT_LEVELS 7 +#endif + +#endif diff --git a/keyboards/tv44/keymaps/tong92/keymap.c b/keyboards/tv44/keymaps/tong92/keymap.c new file mode 100644 index 0000000000..4a16b3554f --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/keymap.c @@ -0,0 +1,138 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. +//Author: tong92 <tong92power@gmail.com> + +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define LOWER F(1) +#define RAISE F(2) +#define FTN MO(4) +#define MOUSE M(10) +#define GO_DEFT M(99) +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,--------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | Enter| + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | Shift | Z | X | C | V | B | N | M | , | . | / |Shift| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | Ftn1 | GUI | Alt | Space/LOWER | Space/RAISE | ' | [ | ] | Alt | + * `--------------------------------------------------------------------------' + */ +[0] = { +{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, +{KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_ENT}, +{KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT }, +{FTN ,KC_LGUI,KC_LALT,LOWER,XXXXXXX,XXXXXXX,XXXXXXX,RAISE,KC_QUOT,KC_LBRC,KC_RBRC,KC_RALT} +}, +/* LOWER + * ,--------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | | | END | LEFT| Down|RIGHT| + * `--------------------------------------------------------------------------' + */ +[1] = { +{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* RAISE + * ,--------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | | | END | LEFT| Down|RIGHT| + * `--------------------------------------------------------------------------' + */ +[2] ={ +{KC_TILD,KC_EXLM,KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,_______ }, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS,KC_EQL, KC_LCBR,KC_RCBR,KC_PIPE }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* FTN + * ,--------------------------------------------------------------------------. + * | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DELET | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | Ctrl| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | DeskL | DeskR| Task Manager| DeskX | MOUSE| | | LED | + * `--------------------------------------------------------------------------' + */ +[4] = { +{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT}, +{_______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT) ,XXXXXXX ,LALT(KC_CAPS),KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX}, +{_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX ,LCTL(KC_CAPS),KC_SLCK,KC_HOME,XXXXXXX,KC_END,XXXXXXX,KC_RCTL}, +{_______,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LCTL(LALT(KC_DELT)),XXXXXXX,XXXXXXX,XXXXXXX,LGUI(LCTL(KC_F4)),MOUSE,XXXXXXX,XXXXXXX,M(0)} +}, +/* MOUSE + * ,--------------------------------------------------------------------------. + * | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| | RESET | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | | | | | | |M_AC0|M_AC1|M_AC2| | | + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | GO_DEFAULT | GO_DEFAULT | | | | | + * `--------------------------------------------------------------------------' + */ +[10] ={ +{XXXXXXX,XXXXXXX,XXXXXXX,KC_MS_U,XXXXXXX,XXXXXXX,XXXXXXX,KC_WH_L,KC_WH_U,KC_WH_R,XXXXXXX,RESET}, +{XXXXXXX,XXXXXXX,KC_MS_L,KC_MS_D,KC_MS_R,XXXXXXX,XXXXXXX,KC_BTN1,KC_WH_D,KC_BTN2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_ACL0,KC_ACL1,KC_ACL2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_KEY(1, KC_SPC), + [2] = ACTION_LAYER_TAP_KEY(2, KC_SPC) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + break; + case 10: + if (record->event.pressed) { + layer_on(10); + } + break; + case 99: + if (record->event.pressed) { + layer_off(10); + layer_off(4); + } + break; + } + return MACRO_NONE; +};
\ No newline at end of file diff --git a/keyboards/tv44/keymaps/tong92/readme.md b/keyboards/tv44/keymaps/tong92/readme.md new file mode 100644 index 0000000000..8208572568 --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/readme.md @@ -0,0 +1,52 @@ +# The tong92's keymap for tv44 + +- Arrow Layout (45key) +- my keymap for Window User +- Mouse Layer : space -> Default Layer + +## Qwerty + ,--------------------------------------------------------------------------. + | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | Ctrl | A | S | D | F | G | H | J | K | L | ; | Enter| + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | Shift | Z | X | C | V | B | N | M | , | . | / |Shift| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | Ftn1 | GUI | Alt | Space/LOWER | Space/RAISE | ' | [ | ] | Alt | + `--------------------------------------------------------------------------' + + +## RAISE + ,--------------------------------------------------------------------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | | | | | END | LEFT| Down|RIGHT| + `--------------------------------------------------------------------------' + + +## FTN + ,--------------------------------------------------------------------------. + | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DELET | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | Ctrl| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | DeskL | DeskR| Task Manager| DeskX | MOUSE| | | LED | + `--------------------------------------------------------------------------' + + +## MOUSE + ,--------------------------------------------------------------------------. + | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| | RESET | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | | | | | | | |M_AC0|M_AC1|M_AC2| | | + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | | | GO_DEFAULT | GO_DEFAULT | | | | | + `--------------------------------------------------------------------------' diff --git a/keyboards/tv44/keymaps/xyverz/keymap.c b/keyboards/tv44/keymaps/xyverz/keymap.c index 8cbcf8d35a..00347b0190 100644 --- a/keyboards/tv44/keymaps/xyverz/keymap.c +++ b/keyboards/tv44/keymaps/xyverz/keymap.c @@ -22,38 +22,38 @@ extern keymap_config_t keymap_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_DV] = { /* 0: Dvorak */ - {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC }, - {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT }, + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH }, + {MO(_L1), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, LT(_L2, KC_MINS)}, {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT }, - {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_BSLS, KC_EQL, XXXXXXX, KC_ENT } }, [_QW] = { /* 1: Qwerty */ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, - {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT }, + {MO(_L1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_L2, KC_QUOT)}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, - {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, KC_ENT } }, [_CM] = { /* 2: Colemak */ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC }, - {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT }, + {MO(_L1), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, LT(_L2, KC_QUOT)}, {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT }, - {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, MO(_L2) } + {KC_LCTL, KC_LALT, KC_LGUI, KC_BSPC, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC, KC_SLSH, KC_MINS, XXXXXXX, KC_ENT } }, [_L1] = {/* 1: FN 1 */ - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, + {KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, {_______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, _______ }, {_______, _______, _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT }, - {KC_ESC, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_SLSH, _______, _______ } + {KC_ESC, KC_LGUI, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_EQL, _______, _______ } }, [_L2] = { /* 2: FN 2 */ - {KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_ESC }, - {_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_VOLU, KC_ENT }, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_VOLD, _______ }, - {QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______ } + {KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_ESC }, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_HOME, KC_PGUP, KC_VOLU, _______ }, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_END, KC_PGDN, KC_VOLD, _______ }, + {QWERTY, DVORAK, COLEMAK, _______, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, KC_PLUS, _______, _______ } } }; diff --git a/keyboards/xd60/keymaps/default/keymap.c b/keyboards/xd60/keymaps/default/keymap.c index 11be9afca2..784088d530 100644 --- a/keyboards/xd60/keymaps/default/keymap.c +++ b/keyboards/xd60/keymaps/default/keymap.c @@ -5,8 +5,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // 0: Base Layer KEYMAP( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, \ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RGUI, F(0), KC_LEFT, KC_DOWN, KC_RIGHT), |
