diff options
Diffstat (limited to 'keyboards')
| -rw-r--r-- | keyboards/mechwild/puckbuddy/config.h | 159 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/glcdfont.c | 231 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/halconf.h | 13 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/info.json | 25 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/keymaps/default/keymap.c | 64 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/keymaps/via/keymap.c | 64 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/keymaps/via/rules.mk | 1 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/ld/STM32F401xE.ld | 88 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/mcuconf.h | 12 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/post_rules.mk | 7 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/puckbuddy.c | 307 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/puckbuddy.h | 56 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/readme.md | 27 | ||||
| -rw-r--r-- | keyboards/mechwild/puckbuddy/rules.mk | 27 |
14 files changed, 1081 insertions, 0 deletions
diff --git a/keyboards/mechwild/puckbuddy/config.h b/keyboards/mechwild/puckbuddy/config.h new file mode 100644 index 0000000000..fac68071bb --- /dev/null +++ b/keyboards/mechwild/puckbuddy/config.h @@ -0,0 +1,159 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6D77 // mw = "MechWild" +#define PRODUCT_ID 0x170F +#define DEVICE_VER 0x0100 +#define MANUFACTURER MechWild +#define PRODUCT PuckBuddy + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +#ifdef UF2_BUILD +#define EXTERNAL_EEPROM_BYTE_COUNT 2048 +#define EXTERNAL_EEPROM_PAGE_SIZE 128 +#define EXTERNAL_EEPROM_ADDRESS_SIZE 1 +#define EXTERNAL_EEPROM_WRITE_TIME 0 +#define FEE_PAGE_BASE_ADDRESS 0x08008000 +#endif + +/* Define custom font */ +#define OLED_FONT_H "keyboards/mechwild/puckbuddy/glcdfont.c" + +/* allows the "key" button on the blackpill to toggle caps lock for user testing before soldering */ +#define DIP_SWITCH_PINS { A0 } + +/* status light pins using the on board LED for the blackpill */ +#define LED_CAPS_LOCK_PIN C13 +#define LED_PIN_ON_STATE 0 + +/* set the tapping term for glidepoint pad to register a tap click */ +//#define CIRQUE_PINNACLE_TAPPING_TERM 0 // This is set to 0 to disable it + +/* TAPPING_TERM value is used for the CIRQUE_PINNACLE_TAPPING_TERM as well by default + * defining it this way allows us to easily modify it with DYNAMIC_TAPPING_TERM_ENABLE + */ +#define TAPPING_TERM 0 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B12, B13, B14, B15 } +#define MATRIX_COL_PINS { B10, A8, B4, B5 } +#define UNUSED_PINS + +/* spi config */ +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN A5 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN A7 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN A6 +#define SPI_MISO_PAL_MODE 5 +#define CIRQUE_PINNACLE_SPI_DIVISOR 8 +#define CIRQUE_PINNACLE_SPI_CS_PIN A4 + +/* encoder pins */ +#define ENCODERS_PAD_A { B1, B3 } +#define ENCODERS_PAD_B { B0, A15 } + +/* encoder resolution */ +#define ENCODER_RESOLUTION 4 +#define TAP_CODE_DELAY 10 + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* RGB settings, uncomment this define to enable RGB */ +#define RGB_DI_PIN A3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 3 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mechwild/puckbuddy/glcdfont.c b/keyboards/mechwild/puckbuddy/glcdfont.c new file mode 100644 index 0000000000..942f81dd06 --- /dev/null +++ b/keyboards/mechwild/puckbuddy/glcdfont.c @@ -0,0 +1,231 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "progmem.h" + +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xE0, 0xF0, + 0x78, 0x1C, 0x0E, 0x06, 0x06, 0x06, + 0x06, 0x06, 0x0E, 0x0C, 0x0C, 0x18, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x00, 0x00, 0xC0, 0xC0, 0xC0, 0xC0, + 0xC0, 0xFF, 0xFF, 0xC0, 0xC0, 0xC0, + 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0x03, 0x03, 0x03, 0x03, + 0x03, 0x03, 0x03, 0x07, 0x0E, 0x1C, + 0xF8, 0xF0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xFC, 0xFC, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xE0, 0x78, 0x1E, 0x00, + 0x00, 0x00, 0x00, 0xF8, 0xF8, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, + 0x00, 0x00, 0x00, 0xE0, 0xFE, 0xFF, + 0xFE, 0xF8, 0xC0, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xE0, 0xFC, 0xFF, 0xFE, + 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x3E, + 0xE0, 0x80, 0x70, 0x0E, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x07, 0x3C, 0xE0, + 0x80, 0x78, 0x07, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, + 0x70, 0x30, 0x30, 0x30, 0xB0, 0xF0, + 0xF0, 0x00, 0xFE, 0xFF, 0x33, 0x31, + 0x31, 0x31, 0x31, 0x31, 0x31, 0x33, + 0x3F, 0x1C, 0x00, 0x00, 0x00, 0x00, + 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x08, 0x0C, 0x0E, 0x07, + 0x03, 0x03, 0x00, 0x00, 0x00, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xC0, 0xFF, 0xFF, + 0x00, 0x00, 0x00, 0xF8, 0xFE, 0x0F, + 0x07, 0x03, 0x03, 0x03, 0x03, 0x02, + 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0xE0, 0xF0, 0x38, 0x1F, 0x0F, 0x00, + 0x00, 0x00, 0x80, 0xE0, 0x70, 0x38, + 0x18, 0x18, 0x18, 0xFF, 0xFF, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x40, 0xC0, 0xF0, 0xFC, 0x7E, 0x4E, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xF8, 0xFF, 0xFF, 0x1F, + 0x07, 0x1F, 0xFF, 0xFE, 0xF0, 0xC0, + 0xF8, 0xFF, 0x7F, 0x0F, 0x07, 0x7F, + 0xFF, 0xFE, 0xFC, 0x04, 0x04, 0x78, + 0x80, 0x00, 0x00, 0x00, 0xC0, 0x38, + 0x0C, 0x1C, 0x60, 0x80, 0x00, 0x00, + 0x00, 0xF0, 0x0C, 0x04, 0xF4, 0x1C, + 0x80, 0xC0, 0xFC, 0xE6, 0xC3, 0xC1, + 0xC1, 0xC3, 0xE6, 0xFC, 0xC0, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x03, 0x06, 0x0E, 0x0C, 0x0C, 0x0C, + 0x0C, 0x0C, 0x0C, 0x0E, 0x07, 0x03, + 0x00, 0x00, 0x01, 0x03, 0x07, 0x06, + 0x0E, 0x0C, 0x0C, 0x0C, 0x06, 0x06, + 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x1F, 0x0F, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x07, 0x0E, 0x0C, 0x0C, 0x0C, 0x0C, + 0x0C, 0x06, 0x07, 0x03, 0x1F, 0x1F, + 0x00, 0x00, 0x00, 0x00, 0x03, 0x06, + 0x0E, 0x0C, 0x0C, 0x0C, 0x0C, 0x06, + 0x06, 0x00, 0x00, 0x00, 0x1F, 0x1F, + 0x00, 0x01, 0x07, 0x0E, 0x18, 0x10, + 0x00, 0x00, 0x07, 0x1F, 0x18, 0x30, + 0x30, 0x30, 0x30, 0x1F, 0x0F, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x18, 0x3C, 0x3C, 0x1C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x1F, 0x1F, 0x1F, 0x07, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x1F, 0x1F, + 0x0F, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x07, 0x1F, 0x1F, 0x1E, 0xF8, 0x00, + 0x0F, 0x70, 0x30, 0x0E, 0xC1, 0x38, + 0x07, 0x0E, 0x70, 0x83, 0x1C, 0x60, + 0x1E, 0x03, 0xC0, 0x3E, 0x01, 0x00, + 0x3F, 0x7F, 0xFF, 0xFF, 0xF9, 0xC0, + 0xC0, 0xF9, 0xFF, 0xFF, 0x7F, 0x3F, +}; diff --git a/keyboards/mechwild/puckbuddy/halconf.h b/keyboards/mechwild/puckbuddy/halconf.h new file mode 100644 index 0000000000..07e8cdd17b --- /dev/null +++ b/keyboards/mechwild/puckbuddy/halconf.h @@ -0,0 +1,13 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + + +#pragma once + +#define HAL_USE_I2C TRUE + +#define HAL_USE_SPI TRUE +#define SPI_USE_WAIT TRUE +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD + +#include_next <halconf.h> diff --git a/keyboards/mechwild/puckbuddy/info.json b/keyboards/mechwild/puckbuddy/info.json new file mode 100644 index 0000000000..2bba4ba506 --- /dev/null +++ b/keyboards/mechwild/puckbuddy/info.json @@ -0,0 +1,25 @@ +{ + "keyboard_name": "MechWild PuckBuddy", + "url": "mechwild.com", + "maintainer": "kylemccreery", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1.5, "y":0}, + {"label":"k02", "x":2.5, "y":0}, + {"label":"k03", "x":3.5, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k10", "x":0, "y":1.25}, + {"label":"k15", "x":5, "y":1.25}, + {"label":"k20", "x":0, "y":2.25}, + {"label":"k25", "x":5, "y":2.25}, + {"label":"k30", "x":0, "y":3.25}, + {"label":"k35", "x":5, "y":3.25}, + {"label":"k31", "x":1, "y":4.5}, + {"label":"k32", "x":2, "y":4.5}, + {"label":"k33", "x":3, "y":4.5}, + {"label":"k34", "x":4, "y":4.5}] + } + } +} diff --git a/keyboards/mechwild/puckbuddy/keymaps/default/keymap.c b/keyboards/mechwild/puckbuddy/keymaps/default/keymap.c new file mode 100644 index 0000000000..9c7dabcc6a --- /dev/null +++ b/keyboards/mechwild/puckbuddy/keymaps/default/keymap.c @@ -0,0 +1,64 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +/* Physical Layout: + * /-------------------\ + * |ENC| 1 | 2 | 3 |ENC| + * |---+---'---'---+---| + * | 4 | | 5 | + * |---| |---| + * | 6 | | 7 | + * |---| |---| + * | 8 | | 9 | + * \-----,---,---,-----/ + * | A | B | C | D | + * \---'---'---'---/ + * + * Keymap Layout: + * ENC, 1, 2, 3, ENC, + * 4, 5, + * 6, 7, + * 8, A, B, C, D, 9, + * + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_MUTE, MO(_FN3), MO(_FN2), MO(_FN1), LGUI(KC_D), + MO(_FN2), KC_HOME, + MO(_FN3), KC_END, + KC_BTN3, DPI_FINE, + KC_BTN1, KC_BTN2, KC_BTN2, KC_BTN1 + ), + [_FN1] = LAYOUT( + RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, TAP_TOG, + DPI_UP, TAP_UP, + DPI_DN, TAP_DN, + KC_TRNS, KC_TRNS, + KC_HOME, KC_PGUP, KC_PGDN, KC_END + ), + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, + KC_TRNS, RGB_MOD, + KC_TRNS, RGB_RMOD, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/mechwild/puckbuddy/keymaps/via/keymap.c b/keyboards/mechwild/puckbuddy/keymaps/via/keymap.c new file mode 100644 index 0000000000..9c7dabcc6a --- /dev/null +++ b/keyboards/mechwild/puckbuddy/keymaps/via/keymap.c @@ -0,0 +1,64 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +/* Physical Layout: + * /-------------------\ + * |ENC| 1 | 2 | 3 |ENC| + * |---+---'---'---+---| + * | 4 | | 5 | + * |---| |---| + * | 6 | | 7 | + * |---| |---| + * | 8 | | 9 | + * \-----,---,---,-----/ + * | A | B | C | D | + * \---'---'---'---/ + * + * Keymap Layout: + * ENC, 1, 2, 3, ENC, + * 4, 5, + * 6, 7, + * 8, A, B, C, D, 9, + * + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_MUTE, MO(_FN3), MO(_FN2), MO(_FN1), LGUI(KC_D), + MO(_FN2), KC_HOME, + MO(_FN3), KC_END, + KC_BTN3, DPI_FINE, + KC_BTN1, KC_BTN2, KC_BTN2, KC_BTN1 + ), + [_FN1] = LAYOUT( + RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, TAP_TOG, + DPI_UP, TAP_UP, + DPI_DN, TAP_DN, + KC_TRNS, KC_TRNS, + KC_HOME, KC_PGUP, KC_PGDN, KC_END + ), + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, + KC_TRNS, RGB_MOD, + KC_TRNS, RGB_RMOD, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/mechwild/puckbuddy/keymaps/via/rules.mk b/keyboards/mechwild/puckbuddy/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/mechwild/puckbuddy/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/mechwild/puckbuddy/ld/STM32F401xE.ld b/keyboards/mechwild/puckbuddy/ld/STM32F401xE.ld new file mode 100644 index 0000000000..daec7d8583 --- /dev/null +++ b/keyboards/mechwild/puckbuddy/ld/STM32F401xE.ld @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x08004000, len = 16k + flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */ + flash3 (rx) : org = 0x0800C000, len = 16k + flash4 (rx) : org = 0x08010000, len = 512k - 64k + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 96k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash4); +REGION_ALIAS("VECTORS_FLASH_LMA", flash4); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash4); +REGION_ALIAS("XTORS_FLASH_LMA", flash4); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash4); +REGION_ALIAS("TEXT_FLASH_LMA", flash4); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash4); +REGION_ALIAS("RODATA_FLASH_LMA", flash4); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash4); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash4); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash4); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ diff --git a/keyboards/mechwild/puckbuddy/mcuconf.h b/keyboards/mechwild/puckbuddy/mcuconf.h new file mode 100644 index 0000000000..f71868d78e --- /dev/null +++ b/keyboards/mechwild/puckbuddy/mcuconf.h @@ -0,0 +1,12 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE diff --git a/keyboards/mechwild/puckbuddy/post_rules.mk b/keyboards/mechwild/puckbuddy/post_rules.mk new file mode 100644 index 0000000000..ac527500d2 --- /dev/null +++ b/keyboards/mechwild/puckbuddy/post_rules.mk @@ -0,0 +1,7 @@ +ifeq ($(strip $(BOOTLOADER)), tinyuf2) + ifndef EEPROM_DRIVER + MCU_LDSCRIPT = STM32F401xE + EEPROM_DRIVER = vendor + UF2_BUILD = yes + endif +endif
\ No newline at end of file diff --git a/keyboards/mechwild/puckbuddy/puckbuddy.c b/keyboards/mechwild/puckbuddy/puckbuddy.c new file mode 100644 index 0000000000..b82d06f565 --- /dev/null +++ b/keyboards/mechwild/puckbuddy/puckbuddy.c @@ -0,0 +1,307 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "puckbuddy.h" + +#ifndef GLIDEPOINT_DPI_OPTIONS +# define GLIDEPOINT_DPI_OPTIONS \ + { 400, 800, 1200, 1600, 2000, 2400, 2800, 3200, 3600, 4000 } +# ifndef GLIDEPOINT_DPI_DEFAULT +# define GLIDEPOINT_DPI_DEFAULT 1 +# endif +#endif +#ifndef GLIDEPOINT_DPI_DEFAULT +# define GLIDEPOINT_DPI_DEFAULT 1 +#endif + +keyboard_config_t keyboard_config; +uint16_t dpi_array[] = GLIDEPOINT_DPI_OPTIONS; +#define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t)) + +void board_init(void) { + // B9 is configured as I2C1_SDA in the board file; that function must be + // disabled before using B7 as I2C1_SDA. + setPinInputHigh(B9); +} + +#ifdef DYNAMIC_TAPPING_TERM_ENABLE +void tap_modify(int change_value, bool tap_status) { + if (keyboard_config.dt_term_config < 0) { + keyboard_config.dt_term_config *= -1; + } + + keyboard_config.dt_term_config += change_value; + + if (tap_status == false ) { + keyboard_config.dt_term_config *= -1; + g_tapping_term = 0; + } else { + g_tapping_term = keyboard_config.dt_term_config; + } + eeconfig_update_kb(keyboard_config.raw); +} + +void tap_toggle(void) { + keyboard_config.dt_term_config *= -1; + if (keyboard_config.dt_term_config > 0) { + g_tapping_term = keyboard_config.dt_term_config; + } else { + g_tapping_term = 0; + } + eeconfig_update_kb(keyboard_config.raw); +} +#endif + +#ifdef DIP_SWITCH_ENABLE +bool dip_switch_update_kb(uint8_t index, bool active) { + if (!dip_switch_update_user(index, active)) { return false; } + switch (index) { + case 0: + if(active) { tap_code(KC_CLCK); } + break; + break; + } + return true; +} +#endif + +#ifdef ENCODER_ENABLE +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + switch (index) { + case 0: + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + case 1: + if (clockwise) { + tap_code(KC_PGUP); + } else { + tap_code(KC_PGDN); + } + break; + } + return true; +} +#endif + +#ifdef OLED_ENABLE // OLED Functionality +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; // flips the display 180 degrees +} + +bool clear_screen = true; // used to manage singular screen clears to prevent display glitch +bool clear_screen_art = true; // used to manage singular screen clears to prevent display glitch +static void render_name(void) { // Render Puckbuddy "Get Puck'd" text + static const char PROGMEM name_1[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xB6, 0xB6, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x00}; + static const char PROGMEM name_2[] = {0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xB6, 0xB6, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0x00}; + static const char PROGMEM name_3[] = {0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xB6, 0xB6, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0x00}; + oled_set_cursor(0,0); + oled_write_P(name_1, false); + oled_set_cursor(0,1); + oled_write_P(name_2, false); + oled_set_cursor(0,2); + oled_write_P(name_3, false); +} + +static void render_logo(void) { // Render MechWild "MW" Logo + static const char PROGMEM logo_1[] = {0x97, 0x98, 0x99, 0x9A,0x00}; + static const char PROGMEM logo_2[] = {0xB7, 0xB8, 0xB9, 0xBA, 0xBB, 0xBC, 0xBD, 0x00}; + static const char PROGMEM logo_3[] = {0xD7, 0xD8, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xB6, 0x00}; + static const char PROGMEM logo_4[] = {0xB6, 0xB6, 0xB6, 0x9B, 0x9C, 0x9D, 0x9E, 0x00}; + oled_set_cursor(0,0); + oled_write_P(logo_1, false); + oled_set_cursor(0,1); + oled_write_P(logo_2, false); + oled_set_cursor(0,2); + oled_write_P(logo_3, false); + oled_set_cursor(0,3); + oled_write_P(logo_4, false); +} + +bool oled_task_kb(void) { + if(!oled_task_user()) { + return false; + } + if ( IS_HOST_LED_OFF(USB_LED_NUM_LOCK) && IS_HOST_LED_OFF(USB_LED_CAPS_LOCK) && IS_HOST_LED_OFF(USB_LED_SCROLL_LOCK) && get_highest_layer(layer_state) == 0 ) { + if (clear_screen_art == true) { + oled_clear(); + oled_render(); + clear_screen_art = false; + } + render_name(); + oled_set_cursor(0,3); +#ifdef POINTING_DEVICE_ENABLE + oled_write_P(PSTR(" DPI:"), false); + oled_write(get_u16_str(dpi_array[keyboard_config.dpi_config], ' '), false); +#endif +#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only display tap info if it is being configured dynamically + oled_write_P(PSTR(" TAP:"), false); + if (keyboard_config.dt_term_config < 0) { + oled_write_P(PSTR("Off "), false); + } else { + oled_write(get_u16_str(g_tapping_term, ' '), false); + } +#endif + clear_screen = true; + } else { + if (clear_screen == true) { + oled_clear(); + oled_render(); + clear_screen = false; + } + render_logo(); + oled_set_cursor(8,1); + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("Layer 0"), false); + break; + case 1: + oled_write_P(PSTR("Layer 1"), false); + break; + case 2: + oled_write_P(PSTR("Layer 2"), false); + break; + case 3: + oled_write_P(PSTR("Layer 3"), false); + break; + default: + oled_write_P(PSTR("Layer ?"), false); // Should never display, here as a catchall + } + led_t led_state = host_keyboard_led_state(); + oled_set_cursor(8,0); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR") : PSTR(" "), false); +#ifdef POINTING_DEVICE_ENABLE + oled_set_cursor(8,2); + oled_write_P(PSTR("DPI:"), false); + oled_write(get_u16_str(dpi_array[keyboard_config.dpi_config], ' '), false); +#endif +#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only display tap info if it is being configured dynamically + oled_set_cursor(8,3); + oled_write_P(PSTR("TAP:"), false); + if (keyboard_config.dt_term_config < 0) { + oled_write_P(PSTR("Off "), false); + } else { + oled_write(get_u16_str(g_tapping_term, ' '), false); + } +#endif + clear_screen_art = true; + } + return true; +} +#endif + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) { + switch(keycode) { +#ifdef POINTING_DEVICE_ENABLE + case DPI_UP: + if (record->event.pressed) { + keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE; + eeconfig_update_kb(keyboard_config.raw); + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); + } + return false; + case DPI_DN: + if (record->event.pressed) { + if (keyboard_config.dpi_config > 0) { + keyboard_config.dpi_config = (keyboard_config.dpi_config - 1) % DPI_OPTION_SIZE; + } else { + keyboard_config.dpi_config = DPI_OPTION_SIZE - 1; + } + eeconfig_update_kb(keyboard_config.raw); + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); + } + return false; + case DPI_FINE: + if (record->event.pressed) { + pointing_device_set_cpi(dpi_array[0]); + } else { + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); + } + return false; +#endif +#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only include tap info keycodes if it is being configured dynamically + case TAP_UP: + if (record->event.pressed) { + tap_modify(DYNAMIC_TAPPING_TERM_INCREMENT, true); + } + return false; + case TAP_DN: + if (record->event.pressed) { + if (keyboard_config.dt_term_config > 0) { + tap_modify(-1 * DYNAMIC_TAPPING_TERM_INCREMENT, true); + } + } + return false; + case TAP_ON: + if (record->event.pressed) { + tap_modify(0, true); + } + return false; + case TAP_OFF: + if (record->event.pressed) { + tap_modify(0, false); + } + return false; + case TAP_TOG: + if (record->event.pressed) { + tap_toggle(); + } + return false; +#endif + } + return process_record_user(keycode, record); +} + +void pointing_device_init_kb(void) { +#ifdef POINTING_DEVICE_ENABLE + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); +#endif +} + +void eeconfig_init_kb(void) { +#ifdef POINTING_DEVICE_ENABLE + keyboard_config.dpi_config = GLIDEPOINT_DPI_DEFAULT; +#endif +#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only set tap term from eeprom if it is being configured dynamically + keyboard_config.dt_term_config = TAPPING_TERM; +#endif + eeconfig_update_kb(keyboard_config.raw); + eeconfig_init_user(); +} + +void matrix_init_kb(void) { + // is safe to just read DPI setting since matrix init + // comes before pointing device init. + keyboard_config.raw = eeconfig_read_kb(); +#ifdef POINTING_DEVICE_ENABLE + if (keyboard_config.dpi_config > DPI_OPTION_SIZE) { + eeconfig_init_kb(); + } +#endif + matrix_init_user(); +} + +void keyboard_post_init_kb(void) { +#ifdef POINTING_DEVICE_ENABLE + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_toggle_noeeprom(); //double toggle post init removes the weirdness with rgb strips having a yellow first LED + rgblight_toggle_noeeprom(); +#endif +#ifdef DYNAMIC_TAPPING_TERM_ENABLE + tap_toggle(); // Need it to reevaluate this setting after initiating so that it is current after init + tap_toggle(); +#endif + keyboard_post_init_user(); +#ifdef OLED_ENABLE // purposefully after user post init to allow the RGB to startup first + wait_ms(200); // Avoids a startup issue where the oled renders and then turns off with blackpill + oled_on(); +#endif +} diff --git a/keyboards/mechwild/puckbuddy/puckbuddy.h b/keyboards/mechwild/puckbuddy/puckbuddy.h new file mode 100644 index 0000000000..13540a5075 --- /dev/null +++ b/keyboards/mechwild/puckbuddy/puckbuddy.h @@ -0,0 +1,56 @@ +// Copyright 2022 Kyle McCreery (@kylemccreery) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k05,\ + k10, k15,\ + k20, k25,\ + k30, k35,\ + k31, k32, k33, k34 \ +) { \ + { k00, k01, k05, k31 }, \ + { k10, k02, k15, k32 }, \ + { k20, k03, k25, k33 }, \ + { k30, ___, k35, k34 } \ +} + +typedef union { + uint32_t raw; + struct { + uint8_t dpi_config; + int16_t dt_term_config; + }; +} keyboard_config_t; + +extern keyboard_config_t keyboard_config; +extern uint16_t dpi_array[]; + +enum keyboard_keycodes { +#ifdef VIA_ENABLE + DPI_UP = USER00, +#else + DPI_UP = SAFE_RANGE, +#endif + DPI_DN, + DPI_FINE, + TAP_UP, + TAP_DN, + TAP_ON, + TAP_OFF, + TAP_TOG, + NEW_SAFE_RANGE +}; diff --git a/keyboards/mechwild/puckbuddy/readme.md b/keyboards/mechwild/puckbuddy/readme.md new file mode 100644 index 0000000000..1663ad4b9c --- /dev/null +++ b/keyboards/mechwild/puckbuddy/readme.md @@ -0,0 +1,27 @@ +# PuckBuddy + + + +A macropad with a Cirque Glidepoint Trackpad in the middle, powered by the STM32 Blackpill. + +* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery) +* Hardware Supported: PuckBuddy v1.0 +* Hardware Availability: [PuckBuddy on MechWild](https://mechwild.com/product/puckbuddy/) + +Make example for this keyboard (after setting up your build environment): + + make mechwild/puckbuddy:default + +Flashing example for this keyboard: + + make mechwild/puckbuddy:default:flash + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it. +* **Physical reset button**: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available. By default this is the top right key on layer 1. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/mechwild/puckbuddy/rules.mk b/keyboards/mechwild/puckbuddy/rules.mk new file mode 100644 index 0000000000..b769932064 --- /dev/null +++ b/keyboards/mechwild/puckbuddy/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = STM32F401 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes # Encoder Enabled +OLED_ENABLE = yes # OLED Enabled +OLED_DRIVER = SSD1306 # OLED Driver +DIP_SWITCH_ENABLE = yes # Dip Switch Enabled + +POINTING_DEVICE_ENABLE = yes # Pointing Device Enabled +POINTING_DEVICE_DRIVER = cirque_pinnacle_spi # Pointing Device Driver + +DYNAMIC_TAPPING_TERM_ENABLE = yes # Enable Dynamic Tapping Term to control the Tap term for the Cirque Pad easily |