1 files changed, 64 insertions, 70 deletions

diff --git a/keyboards/zeal60/zeal60.c b/keyboards/zeal60/zeal60.c
index 092235ca61..be54f75f3d 100644
--- a/keyboards/zeal60/zeal60.c
+++ b/keyboards/zeal60/zeal60.c
@@ -38,6 +38,14 @@ void eeprom_set_valid(bool valid)
 	eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
 }
 
+void eeprom_reset(void)
+{
+	// Set the Zeal60 specific EEPROM state as invalid.
+	eeprom_set_valid(false);
+	// Set the TMK/QMK EEPROM state as invalid.
+	eeconfig_disable();
+}
+
 #ifdef RAW_ENABLE
 
 void raw_hid_receive( uint8_t *data, uint8_t length )
@@ -54,7 +62,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
 		}
 		case id_get_keyboard_value:
 		{
-			if ( command_data[0] == 0x01 )
+			if ( command_data[0] == id_uptime )
 			{
 				uint32_t value = timer_read32();
 				command_data[1] = (value >> 24 ) & 0xFF;
@@ -104,6 +112,21 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
 			break;
 		}
 #endif // RGB_BACKLIGHT_ENABLED
+		case id_eeprom_reset:
+		{
+			eeprom_reset();
+			break;
+		}
+		case id_bootloader_jump:
+		{
+			// Need to send data back before the jump
+			// Informs host that the command is handled
+			raw_hid_send( data, length );
+			// Give host time to read it
+			wait_ms(100);
+			bootloader_jump();
+			break;
+		}
 		default:
 		{
 			// Unhandled message.
@@ -119,74 +142,61 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
 
 #endif
 
-void bootmagic_lite(void)
+void main_init(void)
 {
-	// The lite version of TMK's bootmagic.
-	// 100% less potential for accidentally making the
-	// keyboard do stupid things.
-
-	// We need multiple scans because debouncing can't be turned off.
-	matrix_scan();
-	wait_ms(DEBOUNCING_DELAY);
-	wait_ms(DEBOUNCING_DELAY);
-	matrix_scan();
-
-	// If the Esc and space bar are held down on power up,
-	// reset the EEPROM valid state and jump to bootloader.
-	// Assumes Esc is at [0,0] and spacebar is at [4,7].
-	// This isn't very generalized, but we need something that doesn't
-	// rely on user's keymaps in firmware or EEPROM.
-	if ( ( matrix_get_row(0) & (1<<0) ) &&
-		( matrix_get_row(4) & (1<<7) ) )
-	{
-		// Set the Zeal60 specific EEPROM state as invalid.
-		eeprom_set_valid(false);
-		// Set the TMK/QMK EEPROM state as invalid.
-		eeconfig_disable();
-		// Jump to bootloader.
-		bootloader_jump();
-	}
-}
-
-void matrix_init_kb(void)
-{
-	bootmagic_lite();
-
 	// If the EEPROM has the magic, the data is good.
 	// OK to load from EEPROM.
-	if (eeprom_is_valid())
-	{
+	if (eeprom_is_valid()) {
 #if RGB_BACKLIGHT_ENABLED
 		backlight_config_load();
 #endif // RGB_BACKLIGHT_ENABLED
-		// TODO: do something to "turn on" keymaps in EEPROM?
-	}
-	else
-	{
+	} else	{
 #if RGB_BACKLIGHT_ENABLED
 		// If the EEPROM has not been saved before, or is out of date,
 		// save the default values to the EEPROM. Default values
 		// come from construction of the zeal_backlight_config instance.
 		backlight_config_save();
 #endif // RGB_BACKLIGHT_ENABLED
-
 #ifdef DYNAMIC_KEYMAP_ENABLE
 		// This resets the keymaps in EEPROM to what is in flash.
 		dynamic_keymap_reset();
 #endif
-
 		// Save the magic number last, in case saving was interrupted
 		eeprom_set_valid(true);
 	}
-
 #if RGB_BACKLIGHT_ENABLED
 	// Initialize LED drivers for backlight.
 	backlight_init_drivers();
-	
+
 	backlight_timer_init();
 	backlight_timer_enable();
 #endif // RGB_BACKLIGHT_ENABLED
+}
 
+void bootmagic_lite(void)
+{
+	// The lite version of TMK's bootmagic.
+	// 100% less potential for accidentally making the
+	// keyboard do stupid things.
+
+	// We need multiple scans because debouncing can't be turned off.
+	matrix_scan();
+	wait_ms(DEBOUNCING_DELAY);
+	wait_ms(DEBOUNCING_DELAY);
+	matrix_scan();
+
+	// If the Esc (matrix 0,0) is held down on power up,
+	// reset the EEPROM valid state and jump to bootloader.
+	if ( matrix_get_row(0) & (1<<0) ) {
+		eeprom_reset();
+		bootloader_jump();
+	}
+}
+
+void matrix_init_kb(void)
+{
+	bootmagic_lite();
+	main_init();
 	matrix_init_user();
 }
 
@@ -205,29 +215,22 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record)
 	process_record_backlight(keycode, record);
 #endif // BACKLIGHT_ENABLED
 
-	switch(keycode)
-	{
+	switch(keycode) {
 		case FN_MO13:
-			if (record->event.pressed)
-			{
+			if (record->event.pressed) {
 				layer_on(1);
 				update_tri_layer(1, 2, 3);
-			}
-			else
-			{
+			} else {
 				layer_off(1);
 				update_tri_layer(1, 2, 3);
 			}
 			return false;
 			break;
 		case FN_MO23:
-			if (record->event.pressed)
-			{
+			if (record->event.pressed) {
 				layer_on(2);
 				update_tri_layer(1, 2, 3);
-			}
-			else
-			{
+			} else {
 				layer_off(2);
 				update_tri_layer(1, 2, 3);
 			}
@@ -247,8 +250,7 @@ uint16_t keymap_function_id_to_action( uint16_t function_id )
 	if ( function_id >= 0x0F00 && function_id <= 0x0FFF )
 	{
 		uint8_t id = function_id & 0xFF;
-		switch ( id )
-		{
+		switch ( id ) {
 			case TRIPLE_TAP_1_3:
 			case TRIPLE_TAP_2_3:
 			{
@@ -293,24 +295,16 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
 	{
 	case TRIPLE_TAP_1_3:
 	case TRIPLE_TAP_2_3:
-		if (record->event.pressed)
-		{
+		if (record->event.pressed) {
 			layer_on( id == TRIPLE_TAP_1_3 ? 1 : 2 );
-
-			if (record->tap.count && !record->tap.interrupted)
-			{
-				if (record->tap.count >= 3)
-				{
+			if (record->tap.count && !record->tap.interrupted) {
+				if (record->tap.count >= 3) {
 					layer_invert(3);
 				}
-			}
-			else
-			{
+			} else {
 				record->tap.count = 0;
 			}
-		}
-		else
-		{
+		} else {
 			layer_off( id == TRIPLE_TAP_1_3 ? 1 : 2 );
 		}
 		break;