diff options
Diffstat (limited to 'keyboards/ydkb/just60/readme.md')
| -rw-r--r-- | keyboards/ydkb/just60/readme.md | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/keyboards/ydkb/just60/readme.md b/keyboards/ydkb/just60/readme.md new file mode 100644 index 0000000000..1fe05bd3ea --- /dev/null +++ b/keyboards/ydkb/just60/readme.md @@ -0,0 +1,17 @@ +# Just60 + +Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io. + +To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are `VCC`, `SCLK`, `MOSI`, `MISO`, `RESET`, `GND`. The `GND` is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with `avrdude`. + +Backlight LEDs and Bluetooth are not working yet. + +* Keyboard Maintainer: [Jianfei Wang](https://github.com/thinxer) +* Hardware Supported: Just60 (atmega32u4) +* Hardware Availability: https://item.taobao.com/item.htm?id=564176654249 + +Make example for this keyboard (after setting up your build environment): + + make ydkb/just60:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |