diff options
Diffstat (limited to 'keyboards/wekey/we27/config.h')
| -rw-r--r-- | keyboards/wekey/we27/config.h | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/keyboards/wekey/we27/config.h b/keyboards/wekey/we27/config.h new file mode 100644 index 0000000000..332b476a4d --- /dev/null +++ b/keyboards/wekey/we27/config.h @@ -0,0 +1,219 @@ +/* +Copyright 2021 @wekey + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5559 +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER @wekey +#define PRODUCT We27 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 5 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F1, D7, B4, B5, B6, F6 } +#define MATRIX_COL_PINS { F4, F5, C7, D6, D4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#ifdef RGB_MATRIX_ENABLE +// The pin connected to the data pin of the LEDs +#define RGB_DI_PIN C6 +// The number of LEDs connected +#define DRIVER_LED_TOTAL 27 + +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +#define RGB_MATRIX_STARTUP_HUE 108 // Sets the default hue value, if none has been set +#define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set +#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set +#define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR // Sets the default mode, if none has been set + +#define DISABLE_RGB_MATRIX_ALPHAS_MODS +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define DISABLE_RGB_MATRIX_BREATHING +#define DISABLE_RGB_MATRIX_BAND_SAT // * +#define DISABLE_RGB_MATRIX_BAND_VAL +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define DISABLE_RGB_MATRIX_CYCLE_ALL +#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN +#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // * +#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL +#define DISABLE_RGB_MATRIX_DUAL_BEACON +#define DISABLE_RGB_MATRIX_RAINBOW_BEACON +#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define DISABLE_RGB_MATRIX_RAINDROPS +#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define DISABLE_RGB_MATRIX_HUE_BREATHING +#define DISABLE_RGB_MATRIX_HUE_PENDULUM +#define DISABLE_RGB_MATRIX_HUE_WAVE +#define DISABLE_RGB_MATRIX_TYPING_HEATMAP +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + +#endif + +#ifdef ENCODER_ENABLE +#define ENCODERS_PAD_A { D3 } +#define ENCODERS_PAD_B { D2 } +#define ENCODER_RESOLUTION 2 + +#define ENCODERS 1 +#define ENCODERS_CW_KEY { { 4, 5 } } +#define ENCODERS_CCW_KEY { { 4, 3 } } +#endif + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 |