3 files changed, 0 insertions, 54 deletions
diff --git a/keyboards/unikeyboard/diverge3/config.h b/keyboards/unikeyboard/diverge3/config.h
index 5f1441cdbd..d01d7f04b2 100644
--- a/keyboards/unikeyboard/diverge3/config.h
+++ b/keyboards/unikeyboard/diverge3/config.h
@@ -66,27 +66,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/unikeyboard/divergetm2/config.h b/keyboards/unikeyboard/divergetm2/config.h
index 89e3c04897..64343a30f1 100644
--- a/keyboards/unikeyboard/divergetm2/config.h
+++ b/keyboards/unikeyboard/divergetm2/config.h
@@ -48,15 +48,3 @@
 
 /* serial.c configuration for split keyboard */
 #define SOFT_SERIAL_PIN D0
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
diff --git a/keyboards/unikeyboard/felix/config.h b/keyboards/unikeyboard/felix/config.h
index f6e4baa25d..af678e140b 100644
--- a/keyboards/unikeyboard/felix/config.h
+++ b/keyboards/unikeyboard/felix/config.h
@@ -62,27 +62,6 @@
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */