diff options
Diffstat (limited to 'keyboards/unikeyboard')
38 files changed, 1609 insertions, 0 deletions
diff --git a/keyboards/unikeyboard/diverge3/config.h b/keyboards/unikeyboard/diverge3/config.h new file mode 100644 index 0000000000..45dedfe621 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/config.h @@ -0,0 +1,114 @@ +/* +Copyright 2017 IslandMan93 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1257 +#define DEVICE_VER 0x0001 +#define MANUFACTURER UniKeyboard +#define PRODUCT diverge3 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +#define BACKLIGHT_PIN C6 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D0 + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 3 +#endif + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ + #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/unikeyboard/diverge3/diverge3.c b/keyboards/unikeyboard/diverge3/diverge3.c new file mode 100644 index 0000000000..4143b14275 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/diverge3.c @@ -0,0 +1,16 @@ +/* Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "diverge3.h" diff --git a/keyboards/unikeyboard/diverge3/diverge3.h b/keyboards/unikeyboard/diverge3/diverge3.h new file mode 100644 index 0000000000..c668bb29ef --- /dev/null +++ b/keyboards/unikeyboard/diverge3/diverge3.h @@ -0,0 +1,50 @@ +/* Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#ifdef USE_I2C +#include <stddef.h> +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/interrupt.h> +#endif +#endif + +#define XXX KC_NO + +// This a shortcut to help you visually see your layout. +// The second converts the arguments into a two-dimensional array +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ + L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ + L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ + L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ + L40, L41, L42, L43, L44, LT0, LT1, LT2, RT2, RT1, RT0, R40, R41, R42, R43, R44 \ +) { \ + { L00, L01, L02, L03, L04, L05, L06, XXX }, \ + { L10, L11, L12, L13, L14, L15, L16, XXX }, \ + { L20, L21, L22, L23, L24, L25, L26, XXX }, \ + { L30, L31, L32, L33, L34, L35, L36, XXX }, \ + { L40, L41, L42, L43, L44, LT0, LT1, LT2 }, \ + { R06, R05, R04, R03, R02, R01, R00, XXX }, \ + { R16, R15, R14, R13, R12, R11, R10, XXX }, \ + { R26, R25, R24, R23, R22, R21, R20, XXX }, \ + { R36, R35, R34, R33, R32, R31, R30, XXX }, \ + { R44, R43, R42, R41, R40, RT0, RT1, RT2 } \ + } diff --git a/keyboards/unikeyboard/diverge3/info.json b/keyboards/unikeyboard/diverge3/info.json new file mode 100644 index 0000000000..fc678b40bc --- /dev/null +++ b/keyboards/unikeyboard/diverge3/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "Diverge3", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0.75}, {"x":2, "y":0.25}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0.25}, {"x":6, "y":0.5}, {"x":10, "y":0.5}, {"x":11, "y":0.25}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0.25}, {"x":15, "y":0.75}, {"x":16, "y":0}, {"x":0, "y":1}, {"x":1, "y":1.75}, {"x":2, "y":1.25}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1.25}, {"x":6, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.25}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1.25}, {"x":15, "y":1.75}, {"x":16, "y":1}, {"x":0, "y":2}, {"x":1, "y":2.75}, {"x":2, "y":2.25}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2.25}, {"x":6, "y":2.5}, {"x":10, "y":2.5}, {"x":11, "y":2.25}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2.25}, {"x":15, "y":2.75}, {"x":16, "y":2}, {"x":0, "y":3}, {"x":1, "y":3.75}, {"x":2, "y":3.25}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3.25}, {"x":6, "y":3.5}, {"x":10, "y":3.5}, {"x":11, "y":3.25}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3.25}, {"x":15, "y":3.75}, {"x":16, "y":3}, {"x":0, "y":4}, {"x":1, "y":4.75}, {"x":2, "y":4.25}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4.75, "h":1.25}, {"x":6, "y":5, "h":1.25}, {"x":7, "y":5.25}, {"x":9, "y":5.25}, {"x":10, "y":5, "h":1.25}, {"x":11, "y":4.75, "h":1.25}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4.25}, {"x":15, "y":4.75}, {"x":16, "y":4}] + } + } +} diff --git a/keyboards/unikeyboard/diverge3/keymaps/default/config.h b/keyboards/unikeyboard/diverge3/keymaps/default/config.h new file mode 100644 index 0000000000..fc375f0812 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/default/config.h @@ -0,0 +1,22 @@ +/* Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here +#define MASTER_RIGHT +#define PERMISSIVE_HOLD +#define TAPPING_TERM 150 diff --git a/keyboards/unikeyboard/diverge3/keymaps/default/keymap.c b/keyboards/unikeyboard/diverge3/keymaps/default/keymap.c new file mode 100644 index 0000000000..acf262696b --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/default/keymap.c @@ -0,0 +1,146 @@ +/* Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +//**************** Definitions needed for quad function to work *********************// +enum { + SE_TAP_DANCE = 0 +}; +//Enums used to clearly convey the state of the tap dance +enum { + SINGLE_TAP = 1, + SINGLE_HOLD = 2, + DOUBLE_TAP = 3, + DOUBLE_HOLD = 4, + DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP + // Add more enums here if you want for triple, quadruple, etc. +}; + +typedef struct { + bool is_press_action; + int state; +} tap; + +int cur_dance (qk_tap_dance_state_t *state) { + if (state->count == 1) { + //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP + if (state->interrupted || state->pressed==0) return SINGLE_TAP; + else return SINGLE_HOLD; + } + //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated + //with single tap. In example below, that means to send `xx` instead of `Escape`. + else if (state->count == 2) { + if (state->interrupted) return DOUBLE_SINGLE_TAP; + else if (state->pressed) return DOUBLE_HOLD; + else return DOUBLE_TAP; + } + else return 6; //magic number. At some point this method will expand to work for more presses +} + +//**************** Definitions needed for quad function to work *********************// +// Backspace Shift TD +//instanalize an instance of 'tap' for the 'x' tap dance. +static tap se_tap_state = { + .is_press_action = true, + .state = 0 +}; + +void se_finished (qk_tap_dance_state_t *state, void *user_data) { + se_tap_state.state = cur_dance(state); + switch (se_tap_state.state) { + case SINGLE_TAP: register_code(KC_SPC); break; + case SINGLE_HOLD: register_code(KC_ENT); break; + default: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC); + //Last case is for fast typing. Assuming your key is `f`: + //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`. + //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms. + } +} + +void se_reset (qk_tap_dance_state_t *state, void *user_data) { + switch (se_tap_state.state) { + case SINGLE_TAP: unregister_code(KC_SPC); break; + case SINGLE_HOLD: unregister_code(KC_ENT); break; + default: unregister_code(KC_SPC); + } + se_tap_state.state = 0; +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [SE_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, se_finished, se_reset) +}; + +// KEYMAP + +#define _QWERTY 0 +#define _LOWER 1 + +enum custom_keycodes { + PAREN_MACRO = SAFE_RANGE, + ARROW_MACRO, + PSELF_MACRO +}; + +// Macros +#define KC_PMAC PAREN_MACRO +#define KC_AMAC ARROW_MACRO + +// Holds for layer +#define KC_DEL1 LT(_LOWER, KC_DEL) +#define KC_TAB1 LT(_LOWER, KC_TAB) + +// Space on tap, enter on hold. +#define KC_SPNT TD(SE_TAP_DANCE) + +#define KC_BSHT SFT_T(KC_BSPC) + +// Jumps the cursor a word right or left +#define KC_WRDRT LCTL(KC_RIGHT) +#define KC_WRDLT LCTL(KC_LEFT) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MUTE, KC_MPLY, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PSCR, + KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_VOLD, KC_VOLU, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_CAPS, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_PGDN, KC_PGUP, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_BSLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_WRDLT, KC_WRDRT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + KC_LCTL, KC_LGUI, KC_APP, KC_LALT, KC_HOME, KC_SPNT, KC_DEL1, KC_BSHT, KC_ENT, KC_TAB1, KC_BSHT, KC_END, KC_DOWN, KC_UP, KC_LEFT, KC_RIGHT + ), + + [_LOWER] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, _______, _______, + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, _______, _______, _______, + _______, _______, KC_LBRC, KC_LPRN, KC_UNDS, KC_LCBR, _______, _______, KC_RCBR, KC_EQL, KC_RPRN, KC_RBRC, KC_COLN, _______, + _______, _______, _______, KC_PMAC, KC_MINS, KC_AMAC, _______, _______, _______, KC_PLUS, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch(keycode) { + case PAREN_MACRO: + SEND_STRING("()"); + return false; break; + case ARROW_MACRO: + SEND_STRING("->"); + return false; break; + } + } + return true; +}; diff --git a/keyboards/unikeyboard/diverge3/keymaps/default/readme.md b/keyboards/unikeyboard/diverge3/keymaps/default/readme.md new file mode 100644 index 0000000000..c2e698b3ce --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/default/readme.md @@ -0,0 +1,6 @@ +# The default keymap for diverge3 + +Just a keymap that I use for programming. + +The focus is to have the thumbs do all the work for spacing/backspacing, shifting, and symbols. +Also there is some duplicated functionality on the left hand for when editing with a mouse. diff --git a/keyboards/unikeyboard/diverge3/keymaps/default/rules.mk b/keyboards/unikeyboard/diverge3/keymaps/default/rules.mk new file mode 100644 index 0000000000..e5ddcae8d9 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/default/rules.mk @@ -0,0 +1 @@ +TAP_DANCE_ENABLE = yes diff --git a/keyboards/unikeyboard/diverge3/keymaps/iso_uk/config.h b/keyboards/unikeyboard/diverge3/keymaps/iso_uk/config.h new file mode 100755 index 0000000000..83f65979c7 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/iso_uk/config.h @@ -0,0 +1,24 @@ +/* Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + + +// place overrides here +#define MASTER_LEFT +#define PERMISSIVE_HOLD +#define TAPPING_TERM 150 + diff --git a/keyboards/unikeyboard/diverge3/keymaps/iso_uk/keymap.c b/keyboards/unikeyboard/diverge3/keymaps/iso_uk/keymap.c new file mode 100644 index 0000000000..2564640293 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/iso_uk/keymap.c @@ -0,0 +1,45 @@ +/* Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +enum layers { + _QWERTY, + _LOWER, +}; + +#define LOWER MO(_LOWER) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_CAPS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LCBR, KC_RCBR, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_PSCR, KC_PGUP, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_NUHS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_INS, KC_PGDN, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_ENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_HOME, KC_END, KC_SPC, KC_SPC, LOWER, KC_QUOT, KC_SPC, KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_SLASH + ), + + [_LOWER] = LAYOUT( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, + BL_TOGG, KC_ASTG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + BL_INC, KC_ASUP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + BL_DEC, KC_ASDN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_ASRP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; diff --git a/keyboards/unikeyboard/diverge3/keymaps/iso_uk/readme.md b/keyboards/unikeyboard/diverge3/keymaps/iso_uk/readme.md new file mode 100755 index 0000000000..ff4971754a --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/iso_uk/readme.md @@ -0,0 +1 @@ +# My UK based diverge 3 layout diff --git a/keyboards/unikeyboard/diverge3/keymaps/iso_uk/rules.mk b/keyboards/unikeyboard/diverge3/keymaps/iso_uk/rules.mk new file mode 100755 index 0000000000..c9383ab8db --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/iso_uk/rules.mk @@ -0,0 +1 @@ +AUTO_SHIFT_ENABLE = yes diff --git a/keyboards/unikeyboard/diverge3/keymaps/workman/config.h b/keyboards/unikeyboard/diverge3/keymaps/workman/config.h new file mode 100644 index 0000000000..9829a604f1 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/workman/config.h @@ -0,0 +1,5 @@ +#pragma once + +// place overrides here +#define PERMISSIVE_HOLD +#define TAPPING_TERM 150
\ No newline at end of file diff --git a/keyboards/unikeyboard/diverge3/keymaps/workman/keymap.c b/keyboards/unikeyboard/diverge3/keymaps/workman/keymap.c new file mode 100644 index 0000000000..415df2eead --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/workman/keymap.c @@ -0,0 +1,210 @@ +/* Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// KEYMAP +extern keymap_config_t keymap_config; + +#define _WORKMAN_P 0 +#define _GAME 1 +#define _RAISE 2 + +#define SHIFT_MOD MOD_BIT(KC_LSFT) +#define SPACE_RAISE LT(_RAISE, KC_SPC) +#define ENT_RAISE LT(_RAISE, KC_ENT) +#define PAGE_PREV S(LCTL(KC_TAB)) +#define PAGE_NEXT LCTL(KC_TAB) + +enum custom_keycodes +{ + LO_BSPC = SAFE_RANGE, + LO_1, + LO_2, + LO_3, + LO_4, + LO_5, + LO_6, + LO_7, + LO_8, + LO_9, + LO_0, +}; + +bool process_record_user(uint16_t keycode, keyrecord_t* record) +{ + if (record->event.pressed) { + switch (keycode) { + case LO_BSPC: + if (record->event.pressed) { + if (get_mods() & SHIFT_MOD) { + uint8_t current_mods = get_mods(); + clear_mods(); + SEND_STRING(SS_TAP(X_DELETE)); + set_mods(current_mods); + } else { + SEND_STRING(SS_TAP(X_BSPACE)); + } + } + return false; + case LO_1: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("1"); + set_mods(current_mods); + } else { + SEND_STRING("!"); + } + } + return false; + case LO_2: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("2"); + set_mods(current_mods); + } else { + SEND_STRING("@"); + } + } + return false; + case LO_3: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("3"); + set_mods(current_mods); + } else { + SEND_STRING("#"); + } + } + return false; + case LO_4: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("4"); + set_mods(current_mods); + } else { + SEND_STRING("$"); + } + } + return false; + case LO_5: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("5"); + set_mods(current_mods); + } else { + SEND_STRING("%"); + } + } + return false; + case LO_6: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("6"); + set_mods(current_mods); + } else { + SEND_STRING("^"); + } + } + return false; + case LO_7: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("7"); + set_mods(current_mods); + } else { + SEND_STRING("&"); + } + } + return false; + case LO_8: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("8"); + set_mods(current_mods); + } else { + SEND_STRING("*"); + } + } + return false; + case LO_9: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("9"); + set_mods(current_mods); + } else { + SEND_STRING("("); + } + } + return false; + case LO_0: + if (record->event.pressed) { + uint8_t current_mods = get_mods(); + if (current_mods & SHIFT_MOD) { + clear_mods(); + SEND_STRING("0"); + set_mods(current_mods); + } else { + SEND_STRING(")"); + } + } + return false; + } + } + return true; +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_WORKMAN_P] = LAYOUT( + KC_ESC, LO_1, LO_2, LO_3, LO_4, LO_5, LO_6, LO_6, LO_7, LO_8, LO_9, LO_0, KC_MINS, KC_ESC, + KC_GRV, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_LPRN, KC_RPRN, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_EQL, + KC_TAB, KC_A, KC_S, KC_H, KC_T, KC_G, KC_LCBR, KC_RCBR, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_BSLS, + KC_LCTL, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_LBRC, KC_RBRC, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + KC_LSFT, RESET, PAGE_PREV, PAGE_NEXT, KC_END, KC_LGUI, KC_LALT, TG(_GAME), LO_BSPC, ENT_RAISE, SPACE_RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RCTL), + + [_GAME] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_ESC, + KC_GRV, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_LPRN, KC_RPRN, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_EQL, + KC_TAB, KC_A, KC_S, KC_H, KC_T, KC_G, KC_LCBR, KC_RCBR, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_BSLS, + KC_LCTL, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_LBRC, KC_RBRC, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + KC_LSFT, KC_F1, KC_F2, KC_3, KC_F5, KC_SPC, KC_LALT, TG(_GAME), LO_BSPC, ENT_RAISE, SPACE_RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RCTL), + + [_RAISE] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, RESET, + _______, _______, _______, _______, _______, _______, BL_INC, KC_VOLU, _______, _______, _______, _______, _______, KC_F12, + _______, _______, _______, _______, _______, _______, BL_DEC, KC_VOLD, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, + _______, _______, _______, _______, _______, _______, BL_BRTG, KC_MUTE, _______, _______, KC_MPRV, KC_MNXT, KC_MPLY, _______, + _______, _______, _______, _______, _______, _______, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +}; diff --git a/keyboards/unikeyboard/diverge3/keymaps/workman/readme.md b/keyboards/unikeyboard/diverge3/keymaps/workman/readme.md new file mode 100644 index 0000000000..48ba482fe6 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/workman/readme.md @@ -0,0 +1,21 @@ +# The Workman keymap for diverge3 + +Basic example of the [Workman Programming Layout](https://github.com/ojbucao/workman) which uses the `SHIFT`ed variants of the number row, by default. + +## Layer 1 - Default Layer + +Workman programming layout. + + + +## Layer 2 - Gaming Layer + +Reverts the number row to the normal 1, 2, 3, etc... for better gaming compatibility. + + + +## Layer 3 - Raise Layer + +Volume and backlight controls (although backlight is not fully functional using `USE_SERIAL` in `../config.h`). + + diff --git a/keyboards/unikeyboard/diverge3/keymaps/workman/rules.mk b/keyboards/unikeyboard/diverge3/keymaps/workman/rules.mk new file mode 100644 index 0000000000..8b13789179 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/keymaps/workman/rules.mk @@ -0,0 +1 @@ + diff --git a/keyboards/unikeyboard/diverge3/readme.md b/keyboards/unikeyboard/diverge3/readme.md new file mode 100644 index 0000000000..6e4cf3d781 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/readme.md @@ -0,0 +1,20 @@ +# diverge3 + +A split 5x7 keyboard with 3 thumb keys. Made by [Unikeyboard](https://unikeyboard.io). + +Keyboard Maintainer: [IslandMan93](https://github.com/islandman93) +Hardware Supported: Pro Micro +Hardware Availability: [Diverge 3](https://unikeyboard.io/product/diverge/) + +Make example for this keyboard (after setting up your build environment): + + make unikeyboard/diverge3:default + +Or for the [Workman](https://github.com/ojbucao/workman) layout: + + make unikeyboard/diverge3:workman + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + +# Reflashing Animus +Reflashing the stock firmware is pretty easy. Just follow the same steps in the [original guide](https://imgur.com/a/8UapN). You will have to manually reset the Pro Micro (by shorting the GND and RST pins) during the upload step. Then reapply your keymap through Arbites. diff --git a/keyboards/unikeyboard/diverge3/rules.mk b/keyboards/unikeyboard/diverge3/rules.mk new file mode 100644 index 0000000000..7fc9fd2291 --- /dev/null +++ b/keyboards/unikeyboard/diverge3/rules.mk @@ -0,0 +1,19 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SPLIT_KEYBOARD = yes diff --git a/keyboards/unikeyboard/divergetm2/config.h b/keyboards/unikeyboard/divergetm2/config.h new file mode 100644 index 0000000000..ee8372aa7e --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/config.h @@ -0,0 +1,73 @@ +/* Copyright 2018 Christon DeWan (xton) + * Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1256 +#define DEVICE_VER 0x0001 +#define MANUFACTURER UniKeyboard +#define PRODUCT diverge tm2 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D7, E6, B4, B5 } +#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D0 + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ diff --git a/keyboards/unikeyboard/divergetm2/divergetm2.c b/keyboards/unikeyboard/divergetm2/divergetm2.c new file mode 100644 index 0000000000..61ea45416c --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/divergetm2.c @@ -0,0 +1,17 @@ +/* Copyright 2018 Christon DeWan (xton) + * Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "divergetm2.h" diff --git a/keyboards/unikeyboard/divergetm2/divergetm2.h b/keyboards/unikeyboard/divergetm2/divergetm2.h new file mode 100644 index 0000000000..6de48e41c7 --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/divergetm2.h @@ -0,0 +1,70 @@ +/* Copyright 2018 Christon DeWan (xton) + * Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#ifdef USE_I2C +#include <stddef.h> +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/interrupt.h> +#endif +#endif + +#ifndef FLIP_HALF +// Standard Keymap +// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, R31, R32, R33, R34, R35 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, KC_NO }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, KC_NO } \ + } +#else +// Keymap with right side flipped +// (TRRS jack on both halves are to the right) +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, R31, R32, R33, R34, R35 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, KC_NO }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { KC_NO, R31, R32, R33, R34, R35 } \ + } +#endif + +#define LAYOUT_ortho_4x12_2x2u LAYOUT diff --git a/keyboards/unikeyboard/divergetm2/info.json b/keyboards/unikeyboard/divergetm2/info.json new file mode 100644 index 0000000000..fc64e57906 --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/info.json @@ -0,0 +1,57 @@ +{ + "keyboard_name": "UniKeyboard Diverge TM 2", + "url": "", + "maintainer": "islandman93, xton", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"L00", "x":0, "y":0}, + {"label":"L01", "x":1, "y":0}, + {"label":"L02", "x":2, "y":0}, + {"label":"L03", "x":3, "y":0}, + {"label":"L04", "x":4, "y":0}, + {"label":"L05", "x":5, "y":0}, + {"label":"R00", "x":7, "y":0}, + {"label":"R01", "x":8, "y":0}, + {"label":"R02", "x":9, "y":0}, + {"label":"R03", "x":10, "y":0}, + {"label":"R04", "x":11, "y":0}, + {"label":"R05", "x":12, "y":0}, + {"label":"L10", "x":0, "y":1}, + {"label":"L11", "x":1, "y":1}, + {"label":"L12", "x":2, "y":1}, + {"label":"L13", "x":3, "y":1}, + {"label":"L14", "x":4, "y":1}, + {"label":"L15", "x":5, "y":1}, + {"label":"R10", "x":7, "y":1}, + {"label":"R11", "x":8, "y":1}, + {"label":"R12", "x":9, "y":1}, + {"label":"R13", "x":10, "y":1}, + {"label":"R14", "x":11, "y":1}, + {"label":"R15", "x":12, "y":1}, + {"label":"L20", "x":0, "y":2}, + {"label":"L21", "x":1, "y":2}, + {"label":"L22", "x":2, "y":2}, + {"label":"L23", "x":3, "y":2}, + {"label":"L24", "x":4, "y":2}, + {"label":"L25", "x":5, "y":2}, + {"label":"R20", "x":7, "y":2}, + {"label":"R21", "x":8, "y":2}, + {"label":"R22", "x":9, "y":2}, + {"label":"R23", "x":10, "y":2}, + {"label":"R24", "x":11, "y":2}, + {"label":"R25", "x":12, "y":2}, + {"label":"L30", "x":0, "y":3}, + {"label":"L31", "x":1, "y":3}, + {"label":"L32", "x":2, "y":3}, + {"label":"L33", "x":3, "y":3}, + {"label":"L34", "x":4, "y":3, "w":2}, + {"label":"R31", "x":7, "y":3, "w":2}, + {"label":"R32", "x":9, "y":3}, + {"label":"R33", "x":10, "y":3}, + {"label":"R34", "x":11, "y":3}, + {"label":"R35", "x":12, "y":3} + ] + } + } +} diff --git a/keyboards/unikeyboard/divergetm2/keymaps/default/config.h b/keyboards/unikeyboard/divergetm2/keymaps/default/config.h new file mode 100644 index 0000000000..ccd00621fd --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/keymaps/default/config.h @@ -0,0 +1,23 @@ +/* Copyright 2018 Christon DeWan (xton) + * Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here +#define MASTER_RIGHT +#define PERMISSIVE_HOLD +#define TAPPING_TERM 150 diff --git a/keyboards/unikeyboard/divergetm2/keymaps/default/keymap.c b/keyboards/unikeyboard/divergetm2/keymaps/default/keymap.c new file mode 100644 index 0000000000..fb5957ccae --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/keymaps/default/keymap.c @@ -0,0 +1,199 @@ +/* Copyright 2018 Christon DeWan (xton) + * Copyright 2017 IslandMan93 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK +}; + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Ctrl | Alt | GUI | Lower | Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_ortho_4x12_2x2u( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + RESET, KC_LCTL, KC_LALT, KC_LGUI, LT(_LOWER, KC_SPC), LT(_RAISE,KC_SPC), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Ctrl | Alt | GUI | Lower | Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT_ortho_4x12_2x2u( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + KC_NO, KC_LCTL, KC_LALT, KC_LGUI, LT(_LOWER, KC_SPC), LT(_RAISE,KC_SPC), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Ctrl | Alt | GUI | Lower | Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT_ortho_4x12_2x2u( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , + KC_NO, KC_LCTL, KC_LALT, KC_LGUI, LT(_LOWER, KC_SPC), LT(_RAISE,KC_SPC), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_ortho_4x12_2x2u( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + BL_STEP, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, + _______, _______, _______, _______, _______, MO(_RAISE), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_ortho_4x12_2x2u( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, + _______, _______, _______, _______, MO(_LOWER), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_ortho_4x12_2x2u( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +#define SPACE_WAIT 100 +uint16_t rl_start_time = 0; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if(rl_start_time && record->event.pressed) rl_start_time = 0; + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + set_single_persistent_default_layer(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_colemak); + #endif + set_single_persistent_default_layer(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_dvorak); + #endif + set_single_persistent_default_layer(1UL<<_DVORAK); + } + return false; + break; + } + return true; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); +} diff --git a/keyboards/unikeyboard/divergetm2/keymaps/default/readme.md b/keyboards/unikeyboard/divergetm2/keymaps/default/readme.md new file mode 100644 index 0000000000..dceb4f8a95 --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# A default-ish keymap for diverge tm2 + +Actually it's a Planck layout, but I needed something for the default. :-D + +The 2u spacebars are space when tapped, raise/lower when held. diff --git a/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/config.h b/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/config.h new file mode 100644 index 0000000000..4ba4a57165 --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/config.h @@ -0,0 +1,23 @@ +#pragma once + +// help for fast typist+dual function keys? +#define PERMISSIVE_HOLD +// Let me type `ls -l` more quickly. +#define TAPPING_FORCE_HOLD + +// where is the cord plugged in? +#define MASTER_RIGHT + +/* speed up mousekeys a bit */ +#define MOUSEKEY_DELAY 50 +#define MOUSEKEY_INTERVAL 20 +#define MOUSEKEY_MAX_SPEED 8 +#define MOUSEKEY_TIME_TO_MAX 30 +#define MOUSEKEY_WHEEL_MAX_SPEED 8 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 + +// because I'm lazy and didn't case out the rgb support +#define RGBLED_NUM 2 + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_LEVELS 3 diff --git a/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/keymap.c b/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/keymap.c new file mode 100644 index 0000000000..5f478c1df1 --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/keymap.c @@ -0,0 +1,155 @@ + /* Copyright 2018 Christon DeWan + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +#include "xtonhasvim.h" + +/************************************ + * states + ************************************/ + +enum layers { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, + _MOVE, + _MOUSE, + _CMD +}; + +extern uint8_t vim_cmd_layer(void) { return _CMD; } + +enum keymap_keycodes { + RAISE = VIM_SAFE_RANGE, + LOWER +}; + +/************************************ + * keymaps! + ************************************/ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Ctrl*| A | S | D | F | G | H | J | K | L | ;* | ' | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | chkwm| | Alt | GUI | Lower* | Raise* | SPC | GUI | | Vim | + * `-----------------------------------------------------------------------------------' + * + * - Ctrl acts as Esc when tapped. + * - Holding ; switches to movement layer. + * - Tapping raise or lower produces space. + */ +[_QWERTY] = LAYOUT_ortho_4x12_2x2u( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + LCTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(_MOVE,KC_SCLN), KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_ENT) , \ + LSFT(KC_LALT), MO(_MOVE), KC_LALT, KC_LGUI, LT(_LOWER, KC_SPC), LT(_RAISE, KC_SPC), KC_RGUI, KC_RALT, MO(_MOVE), VIM_START \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Next | Vol- | Vol+ | Play | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Bail | | | | Raise | | | Bail | | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_ortho_4x12_2x2u( \ + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSPC, \ + KC_DEL, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, X_____X, X_____X, X_____X, X_____X, FIREY_RETURN, \ + RESET, TO(_QWERTY), _______, _______, _______, MO(_RAISE), _______, _______, TO(_QWERTY), X_____X \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | Next | Vol- | Vol+ | Play | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Bail | | | Lower | | | | Bail | | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_ortho_4x12_2x2u( \ + KC_GRV, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_DEL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ + _______, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, FIREY_RETURN, \ + X_____X, TO(_QWERTY), _______, _______, MO(_LOWER), _______, _______, _______, TO(_QWERTY), RESET \ +), + + +/* Adjust (Lower + Raise) + * ,-------------------------------------------------------------------------------------. + * |BL Raise| | | | | | | | | | | | + * |--------+------+------+------+------+-------------+------+------+------+------+------| + * |BL Lower| | | | | | | | | | | | + * |--------+------+------+------+------+------|------+------+------+------+------+------| + * |BL STEP | | | | | | | Next | Vol- | Vol+ | Play | | + * |--------+------+------+------+------+------+------+------+------+------+------+------| + * |Backlite| Mouse| | | | | | | Bail | | + * `-------------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_ortho_4x12_2x2u( \ + BL_INC, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, \ + BL_DEC, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, \ + BL_STEP, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, X_____X, \ + BL_TOGG, TO(_MOUSE), _______, _______, _______, _______, _______, _______, TO(_QWERTY), X_____X \ +), + + +/* movement layer (hold semicolon) */ +[_MOVE] = LAYOUT_ortho_4x12_2x2u( \ + TO(_QWERTY), X_____X, X_____X, X_____X, X_____X, X_____X, KC_HOME, KC_PGDN, KC_PGUP, KC_END, X_____X, X_____X, \ + _______, X_____X, LGUI(KC_LBRC), LGUI(LSFT(KC_LBRC)), LGUI(LSFT(KC_RBRC)), LGUI(KC_RBRC), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, X_____X, \ + _______, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, X_____X \ +), + +/* mouse layer + */ +[_MOUSE] = LAYOUT_ortho_4x12_2x2u( \ + TO(_QWERTY), X_____X, X_____X, KC_MS_UP, X_____X, X_____X, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_UP, KC_MS_WH_RIGHT, X_____X, X_____X , \ + _______, X_____X, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, X_____X, X_____X, KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, X_____X, X_____X, \ + _______, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, _______, \ + _______, TO(_QWERTY), _______, _______, _______, _______, _______, _______, TO(_QWERTY), X_____X \ +), + +/* vim command layer. + */ +[_CMD] = LAYOUT_ortho_4x12_2x2u( \ + X_____X, X_____X, VIM_W, VIM_E, X_____X, X_____X, VIM_Y, VIM_U, VIM_I, VIM_O, VIM_P, X_____X, \ + VIM_ESC, VIM_A, VIM_S, VIM_D, X_____X, VIM_G, VIM_H, VIM_J, VIM_K, VIM_L, X_____X, X_____X, \ + VIM_SHIFT, X_____X, VIM_X, VIM_C, VIM_V, VIM_B, X_____X, X_____X, VIM_COMMA, VIM_PERIOD, X_____X, VIM_SHIFT, \ + _______, TO(_QWERTY), _______, _______, X_____X, X_____X, _______, _______, TO(_QWERTY), X_____X \ +) + +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); +} diff --git a/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/readme.md b/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/readme.md new file mode 100644 index 0000000000..9ff4ce1f19 --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/readme.md @@ -0,0 +1,9 @@ +# Xton has a tiny keyboard! With Vim! + +Based on the standard Planck layout with a few changes: + +* Escape moved to dual-function with control. +* Dedicated movement and mouse layers. +* Top and middle row swapped in `_RAISE` and `_LOWER` because I never use F-keys. +* Vim layers! See `users/xtonhasvim`. + diff --git a/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/rules.mk b/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/rules.mk new file mode 100644 index 0000000000..ede4e02b64 --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/keymaps/xtonhasvim/rules.mk @@ -0,0 +1,3 @@ +MOUSEKEY_ENABLE = yes +# BACKLIGHT_ENABLE = yes +AUDIO_ENABLE = no diff --git a/keyboards/unikeyboard/divergetm2/readme.md b/keyboards/unikeyboard/divergetm2/readme.md new file mode 100644 index 0000000000..5bff74389f --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/readme.md @@ -0,0 +1,21 @@ +# diverge tm2 + +A 4x6x2 split ortholinear keyboard with 2u spacebars like the Levinson (similar to Let's Split). Made by [Unikeyboard](https://unikeyboard.io). + +Keyboard Maintainer: [IslandMan93](https://github.com/islandman93) and [xton](https://github.com/xton) +Hardware Supported: Pro Micro +Hardware Availability: [Diverge TM2](https://unikeyboard.io/product/diverge-tm/) + +Make example for this keyboard (after setting up your build environment): + + make unikeyboard/divergetm2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +# Flashing the first time + +Disassemble the case so you have access to each Pro Micro. Flash each half with QMK Toolbox by connecting the USB cable and shorting RST and GND. After that, just use the soft reset key on your respective layout to reflash both halves. + +# Reflashing Animus + +Reflashing the stock firmware is pretty easy. Just follow the same steps in the [original guide](https://imgur.com/a/8UapN). You will have to manually reset the Pro Micro (by shorting the GND and RST) during the upload step. Then reapply your keymap through Arbites. diff --git a/keyboards/unikeyboard/divergetm2/rules.mk b/keyboards/unikeyboard/divergetm2/rules.mk new file mode 100644 index 0000000000..bd53948797 --- /dev/null +++ b/keyboards/unikeyboard/divergetm2/rules.mk @@ -0,0 +1,20 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. + +SPLIT_KEYBOARD = yes diff --git a/keyboards/unikeyboard/felix/config.h b/keyboards/unikeyboard/felix/config.h new file mode 100644 index 0000000000..73f9d1fa86 --- /dev/null +++ b/keyboards/unikeyboard/felix/config.h @@ -0,0 +1,127 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Unikeyboard +#define PRODUCT Felix + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 } +#define MATRIX_COL_PINS { B5, B4, E6, D7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN C6 +#define BACKLIGHT_LEVELS 5 +//#define BACKLIGHT_BREATHING + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/unikeyboard/felix/felix.c b/keyboards/unikeyboard/felix/felix.c new file mode 100644 index 0000000000..013360d043 --- /dev/null +++ b/keyboards/unikeyboard/felix/felix.c @@ -0,0 +1 @@ +#include "felix.h" diff --git a/keyboards/unikeyboard/felix/felix.h b/keyboards/unikeyboard/felix/felix.h new file mode 100644 index 0000000000..f43a586c8e --- /dev/null +++ b/keyboards/unikeyboard/felix/felix.h @@ -0,0 +1,19 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_5x4( \ + K000, K001, K002, K003, \ + K100, K101, K102, K103, \ + K200, K201, K202, K203, \ + K300, K301, K302, K303, \ + K400, K401, K402, K403 \ +) { \ + { K000, K001, K002, K003 }, \ + { K100, K101, K102, K103 }, \ + { K200, K201, K202, K203 }, \ + { K300, K301, K302, K303 }, \ + { K400, K401, K402, K403 } \ +} + +#define LAYOUT LAYOUT_ortho_5x4 diff --git a/keyboards/unikeyboard/felix/info.json b/keyboards/unikeyboard/felix/info.json new file mode 100644 index 0000000000..f81d56f340 --- /dev/null +++ b/keyboards/unikeyboard/felix/info.json @@ -0,0 +1,31 @@ +{ + "keyboard_name": "Felix", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT_ortho_5x4": { + "layout": [ + {"label":"K000", "x":0, "y":0}, + {"label":"K001", "x":1, "y":0}, + {"label":"K002", "x":2, "y":0}, + {"label":"K003", "x":3, "y":0}, + {"label":"K100", "x":0, "y":1}, + {"label":"K101", "x":1, "y":1}, + {"label":"K102", "x":2, "y":1}, + {"label":"K103", "x":3, "y":1}, + {"label":"K200", "x":0, "y":2}, + {"label":"K201", "x":1, "y":2}, + {"label":"K202", "x":2, "y":2}, + {"label":"K203", "x":3, "y":2}, + {"label":"K300", "x":0, "y":3}, + {"label":"K301", "x":1, "y":3}, + {"label":"K302", "x":2, "y":3}, + {"label":"K303", "x":3, "y":3}, + {"label":"K400", "x":0, "y":4}, + {"label":"K401", "x":1, "y":4}, + {"label":"K402", "x":2, "y":4}, + {"label":"K403", "x":3, "y":4} + ] + } + } +} diff --git a/keyboards/unikeyboard/felix/keymaps/default/keymap.c b/keyboards/unikeyboard/felix/keymaps/default/keymap.c new file mode 100644 index 0000000000..630a46c086 --- /dev/null +++ b/keyboards/unikeyboard/felix/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_5x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_HOME, + KC_P1, KC_P2, KC_P3, KC_END, + KC_P0, KC_PEQL, KC_PDOT, KC_PENT + ) +}; diff --git a/keyboards/unikeyboard/felix/readme.md b/keyboards/unikeyboard/felix/readme.md new file mode 100644 index 0000000000..2ea41d382f --- /dev/null +++ b/keyboards/unikeyboard/felix/readme.md @@ -0,0 +1,13 @@ +# Felix + +A customizable number/macropad made by Unikeyboard. + +Keyboard Maintainer: [QMK Community](https://github.com/qmk) +Hardware Supported: Felix PCB, Pro Micro +Hardware Availability: [Unikeyboard](https://unikeyboard.io/product/felix/) + +Make example for this keyboard (after setting up your build environment): + + make unikeyboard/felix:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/unikeyboard/felix/rules.mk b/keyboards/unikeyboard/felix/rules.mk new file mode 100644 index 0000000000..9fbe5d4dad --- /dev/null +++ b/keyboards/unikeyboard/felix/rules.mk @@ -0,0 +1,20 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Enable N-Key Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = ortho_5x4 |