6 files changed, 100 insertions, 0 deletions
diff --git a/keyboards/redox/rev1/proton_c/config.h b/keyboards/redox/rev1/proton_c/config.h
new file mode 100644
index 0000000000..4ec4a975a4
--- /dev/null
+++ b/keyboards/redox/rev1/proton_c/config.h
@@ -0,0 +1,66 @@
+// Copyright 2022 xerootg
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#undef DEVICE_VER
+#define DEVICE_VER      0x0101 // added 1 for the rev1 + proton c
+
+// wiring of each half
+#undef MATRIX_ROW_PINS
+#define MATRIX_ROW_PINS { B5, B3, B2, B1, B0 }
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { A1, A0, B8, B13, B14, B15, B9 }
+
+// //we are using hardware serial, so lets undef the softserial used otherwise
+
+/* serial.c configuration for split keyboard */
+#define SERIAL_USART_FULL_DUPLEX   // Enable full duplex operation mode.
+/* 
+   Because the rev1 config defines SOFT_SERIAL_PIN, we need to undef it, redefine it, and also assign 
+   it to avoid a redefine error.
+ */
+#undef SOFT_SERIAL_PIN
+#define SOFT_SERIAL_PIN B6     // USART TX pin
+
+#define SERIAL_USART_RX_PIN B7     // USART RX pin
+#define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN     // USART TX pin
+
+#define SERIAL_USART_PIN_SWAP    // Swap TX and RX pins if keyboard is master halve.
+                                   // Check if this feature is necessary with your keyboard design and available on the mcu.
+#define SELECT_SOFT_SERIAL_SPEED 1 // or 0, 2, 3, 4, 5
+                                   //  0: 460800 baud
+                                   //  1: 230400 baud (default)
+                                   //  2: 115200 baud
+                                   //  3: 57600 baud
+                                   //  4: 38400 baud
+                                   //  5: 19200 baud
+#define SERIAL_USART_DRIVER SD1    // USART driver of TX and RX pin. default: SD1
+#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#define SERIAL_USART_TIMEOUT 20    // USART driver timeout. default 20
+
+/* ws2812 RGB LED */
+#undef RGB_DI_PIN
+#define RGB_DI_PIN A9
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
diff --git a/keyboards/redox/rev1/proton_c/halconf.h b/keyboards/redox/rev1/proton_c/halconf.h
new file mode 100644
index 0000000000..0a2498a62f
--- /dev/null
+++ b/keyboards/redox/rev1/proton_c/halconf.h
@@ -0,0 +1,8 @@
+// Copyright 2022 xerootg
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define HAL_USE_SERIAL TRUE
+
+#include_next <halconf.h>
+\ No newline at end of file
diff --git a/keyboards/redox/rev1/proton_c/mcuconf.h b/keyboards/redox/rev1/proton_c/mcuconf.h
new file mode 100644
index 0000000000..ba87dec13d
--- /dev/null
+++ b/keyboards/redox/rev1/proton_c/mcuconf.h
@@ -0,0 +1,9 @@
+// Copyright 2022 xerootg
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 TRUE
diff --git a/keyboards/redox/rev1/proton_c/proton_c.c b/keyboards/redox/rev1/proton_c/proton_c.c
new file mode 100644
index 0000000000..796e2c8c3d
--- /dev/null
+++ b/keyboards/redox/rev1/proton_c/proton_c.c
@@ -0,0 +1,4 @@
+// Copyright 2022 xerootg
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "proton_c.h"
diff --git a/keyboards/redox/rev1/proton_c/proton_c.h b/keyboards/redox/rev1/proton_c/proton_c.h
new file mode 100644
index 0000000000..d8813d9c4d
--- /dev/null
+++ b/keyboards/redox/rev1/proton_c/proton_c.h
@@ -0,0 +1,6 @@
+// Copyright 2022 xerootg
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "rev1.h"
diff --git a/keyboards/redox/rev1/proton_c/rules.mk b/keyboards/redox/rev1/proton_c/rules.mk
new file mode 100644
index 0000000000..829c8365ef
--- /dev/null
+++ b/keyboards/redox/rev1/proton_c/rules.mk
@@ -0,0 +1,7 @@
+# Proton C
+MCU = STM32F303
+BOARD = QMK_PROTON_C
+BOOTLOADER = stm32-dfu
+
+# specific to using the serial serial driver
+SERIAL_DRIVER = usart