12 files changed, 25 insertions, 233 deletions
diff --git a/keyboards/projectcain/relic/config.h b/keyboards/projectcain/relic/config.h
index aa40dad9a5..baa5b5263b 100644
--- a/keyboards/projectcain/relic/config.h
+++ b/keyboards/projectcain/relic/config.h
@@ -16,14 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #pragma once
-#define ENCODERS_PAD_A { D4 }
-#define ENCODERS_PAD_B { D6 }
-
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 11
 
 /*
  * Keyboard Matrix Assignments
@@ -41,59 +33,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -109,7 +53,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/projectcain/relic/info.json b/keyboards/projectcain/relic/info.json
index 2b4041a261..9d0820b4e6 100644
--- a/keyboards/projectcain/relic/info.json
+++ b/keyboards/projectcain/relic/info.json
@@ -8,6 +8,13 @@
         "pid": "0x6060",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D4", "pin_b": "D6"}
+        ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_all": {
             "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"BACK <BR> SPACE", "x":11, "y":0}, {"label":"A", "x":0, "y":1, "w":1.25}, {"label":"S", "x":1.25, "y":1}, {"label":"D", "x":2.25, "y":1}, {"label":"F", "x":3.25, "y":1}, {"label":"G", "x":4.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":";", "x":10.25, "y":1, "w":1.75}, {"label":"Z", "x":0, "y":2, "w":1.75}, {"label":"X", "x":1.75, "y":2}, {"label":"C", "x":2.75, "y":2}, {"label":"V", "x":3.75, "y":2}, {"label":"B", "x":4.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"/", "x":10.75, "y":2, "w":1.25}, {"label":"Ctrl", "x":0.25, "y":3, "w":1.25}, {"label":"Alt", "x":1.5, "y":3, "w":1.25}, {"label":"MO(1)", "x":9.25, "y":3, "w":1.25}, {"label":"MO(2)", "x":10.5, "y":3, "w":1.25}, {"label":"LGUI", "x":3, "y":3.25}, {"label":"BACK <BR> SPACE", "x":4, "y":3.25, "w":1.5}, {"label":"Space", "x":5.5, "y":3.25}, {"label":"Space", "x":6.5, "y":3.25, "w":1.5}, {"label":"RGUI", "x":8, "y":3.25}]
diff --git a/keyboards/projectcain/relic/keymaps/default/config.h b/keyboards/projectcain/relic/keymaps/default/config.h
index 7756a8db2f..ebe839c4c4 100644
--- a/keyboards/projectcain/relic/keymaps/default/config.h
+++ b/keyboards/projectcain/relic/keymaps/default/config.h
@@ -19,5 +19,5 @@
 #define ENCODER_RESOLUTION 2
 #define COMBO_COUNT 6
 #define COMBO_TERM 50
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
 #define DISABLE_LEADER
diff --git a/keyboards/projectcain/relic/rules.mk b/keyboards/projectcain/relic/rules.mk
index 717cc07b4b..c58df49ea8 100644
--- a/keyboards/projectcain/relic/rules.mk
+++ b/keyboards/projectcain/relic/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/projectcain/vault35/config.h b/keyboards/projectcain/vault35/config.h
index b609d84837..457e2f0ab3 100644
--- a/keyboards/projectcain/vault35/config.h
+++ b/keyboards/projectcain/vault35/config.h
@@ -14,11 +14,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 11
 
 /*
  * Keyboard Matrix Assignments
@@ -36,78 +31,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODERS_PAD_A { D6 }
-#define ENCODERS_PAD_B { D7 }
-#define ENCODER_RESOLUTION 2
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//#    define RGBLED_NUM 16
-//#    define RGBLIGHT_HUE_STEP 8
-//#    define RGBLIGHT_SAT_STEP 8
-//#    define RGBLIGHT_VAL_STEP 8
-//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -123,7 +51,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/projectcain/vault35/info.json b/keyboards/projectcain/vault35/info.json
index 4b81c2ef76..488d81b6b8 100644
--- a/keyboards/projectcain/vault35/info.json
+++ b/keyboards/projectcain/vault35/info.json
@@ -8,6 +8,13 @@
       "pid": "0x6060",
       "device_version": "0.0.1"
     },
+    "encoder": {
+      "rotary": [
+        {"pin_a": "D6", "pin_b": "D7", "resolution": 2}
+      ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
     "LAYOUT_split_4space": {
    "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":5, "y":0}, {"label":"U", "x":6, "y":0}, {"label":"I", "x":7, "y":0}, {"label":"O", "x":8, "y":0}, {"label":"P", "x":9, "y":0}, {"label":"BACK<br>SPACE", "x":10, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"S", "x":1.25, "y":1}, {"label":"D", "x":2.25, "y":1}, {"label":"F", "x":3.25, "y":1}, {"label":"G", "x":4.25, "y":1}, {"label":"H", "x":5.25, "y":1}, {"label":"J", "x":6.25, "y":1}, {"label":"K", "x":7.25, "y":1}, {"label":"L", "x":8.25, "y":1}, {"label":"ENTER", "x":9.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"X", "x":1.75, "y":2}, {"label":"C", "x":2.75, "y":2}, {"label":"V", "x":3.75, "y":2}, {"label":"B", "x":4.75, "y":2}, {"label":"N", "x":5.75, "y":2}, {"label":"M", "x":6.75, "y":2}, {"label":"<", "x":7.75, "y":2}, {"label":">", "x":8.75, "y":2}, {"label":"SHIFT", "x":9.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.5, "y":3}, {"label":"LOWER", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1.75}, {"label":"RAISE", "x":7.25, "y":3, "w":1.25}, {"label":"ALT", "x":8.5, "y":3}]
diff --git a/keyboards/projectcain/vault35/keymaps/default/config.h b/keyboards/projectcain/vault35/keymaps/default/config.h
index 3022aa84c4..885d5ad9cb 100644
--- a/keyboards/projectcain/vault35/keymaps/default/config.h
+++ b/keyboards/projectcain/vault35/keymaps/default/config.h
@@ -18,4 +18,4 @@
 
 #define COMBO_COUNT 2
 #define COMBO_TERM 50
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
diff --git a/keyboards/projectcain/vault35/rules.mk b/keyboards/projectcain/vault35/rules.mk
index 77d9fdb410..b03b6fa905 100644
--- a/keyboards/projectcain/vault35/rules.mk
+++ b/keyboards/projectcain/vault35/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/projectcain/vault45/config.h b/keyboards/projectcain/vault45/config.h
index 2fa67320f5..b70109bfa3 100644
--- a/keyboards/projectcain/vault45/config.h
+++ b/keyboards/projectcain/vault45/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
 
 /*
  * Keyboard Matrix Assignments
@@ -39,78 +34,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODERS_PAD_A { B3, D1 }
-#define ENCODERS_PAD_B { B2, D2 }
-#define ENCODER_RESOLUTION 2
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
-//#define RGB_DI_PIN E2
-//#ifdef RGB_DI_PIN
-//#    define RGBLED_NUM 16
-//#    define RGBLIGHT_HUE_STEP 8
-//#    define RGBLIGHT_SAT_STEP 8
-//#    define RGBLIGHT_VAL_STEP 8
-//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -126,7 +54,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/projectcain/vault45/info.json b/keyboards/projectcain/vault45/info.json
index 9e3ebcb02e..ecfa953fd4 100644
--- a/keyboards/projectcain/vault45/info.json
+++ b/keyboards/projectcain/vault45/info.json
@@ -8,6 +8,14 @@
       "pid": "0x6060",
       "device_version": "0.0.1"
     },
+    "encoder": {
+      "rotary": [
+        {"pin_a": "B3", "pin_b": "B2", "resolution": 2},
+        {"pin_a": "D1", "pin_b": "D2", "resolution": 2}
+      ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layout_aliases": {
         "LAYOUT": "LAYOUT_all"
     },
diff --git a/keyboards/projectcain/vault45/keymaps/default/config.h b/keyboards/projectcain/vault45/keymaps/default/config.h
index 2ca1e8f123..4a98bb89d4 100644
--- a/keyboards/projectcain/vault45/keymaps/default/config.h
+++ b/keyboards/projectcain/vault45/keymaps/default/config.h
@@ -18,4 +18,4 @@
 
 #define COMBO_COUNT 2
 #define COMBO_TERM 50
-#define TAPPING_FORCE_HOLD
+#define QUICK_TAP_TERM 0
diff --git a/keyboards/projectcain/vault45/rules.mk b/keyboards/projectcain/vault45/rules.mk
index 77d9fdb410..b03b6fa905 100644
--- a/keyboards/projectcain/vault45/rules.mk
+++ b/keyboards/projectcain/vault45/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #