diff options
Diffstat (limited to 'keyboards/lets_split')
| -rw-r--r-- | keyboards/lets_split/Makefile | 79 | ||||
| -rw-r--r-- | keyboards/lets_split/config.h | 10 | ||||
| -rw-r--r-- | keyboards/lets_split/keymaps/default/keymap.c | 49 | ||||
| -rw-r--r-- | keyboards/lets_split/lets_split.c | 4 | ||||
| -rw-r--r-- | keyboards/lets_split/rev1/config.h | 18 | ||||
| -rw-r--r-- | keyboards/lets_split/rev1/rev1.c | 6 | ||||
| -rw-r--r-- | keyboards/lets_split/rev1/rev1.h | 6 | ||||
| -rw-r--r-- | keyboards/lets_split/rev2/config.h | 14 | ||||
| -rw-r--r-- | keyboards/lets_split/rev2/rev2.c | 6 | ||||
| -rw-r--r-- | keyboards/lets_split/rev2/rev2.h | 6 |
10 files changed, 170 insertions, 28 deletions
diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile index 4e2a6f00fd..6ce6e43731 100644 --- a/keyboards/lets_split/Makefile +++ b/keyboards/lets_split/Makefile @@ -1,3 +1,82 @@ +<<<<<<< HEAD ifndef MAKEFILE_INCLUDED +======= +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= yes # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +USE_I2C ?= yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes +SUBPROJECT_DEFAULT = rev2 +ifndef QUANTUM_DIR +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df include ../../Makefile endif
\ No newline at end of file diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index 5bee553199..91b11f03fd 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -61,6 +61,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION +<<<<<<< HEAD +======= +<<<<<<< HEAD +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df #ifdef SUBPROJECT_rev1 #include "rev1/config.h" #endif @@ -68,3 +72,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "rev2/config.h" #endif #endif +<<<<<<< HEAD +======= + + + +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c index fc41c01fdb..41b9b8d8ff 100644 --- a/keyboards/lets_split/keymaps/default/keymap.c +++ b/keyboards/lets_split/keymaps/default/keymap.c @@ -29,6 +29,7 @@ enum custom_keycodes { #define XXXXXXX KC_NO const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +<<<<<<< HEAD /* Qwerty * ,-----------------------------------------------------------------------------------. @@ -82,41 +83,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +======= +[0] = KEYMAP( \ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + KC_LCTL, _LOWER, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df ), - -/* Lower - * ,-----------------------------------------------------------------------------------. - * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_LOWER] = KEYMAP( \ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ +[3] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ +<<<<<<< HEAD _______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +======= + _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df ), - -/* Raise - * ,-----------------------------------------------------------------------------------. - * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ -[_RAISE] = KEYMAP( \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ +[4] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ +<<<<<<< HEAD _______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ ), @@ -139,6 +128,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) +======= + _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df }; #ifdef AUDIO_ENABLE diff --git a/keyboards/lets_split/lets_split.c b/keyboards/lets_split/lets_split.c index 851299aa2b..8bb33f9514 100644 --- a/keyboards/lets_split/lets_split.c +++ b/keyboards/lets_split/lets_split.c @@ -1,2 +1,6 @@ #include "lets_split.h" +<<<<<<< HEAD +======= + +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index f4d900accb..da5b476733 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -25,7 +25,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x3060 #define DEVICE_VER 0x0001 #define MANUFACTURER Wootpatoot +<<<<<<< HEAD #define PRODUCT Lets Split +======= +#define PRODUCT Lets Split v1 +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df #define DESCRIPTION A split keyboard for the cheap makers /* key matrix size */ @@ -41,11 +45,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define USE_I2C +<<<<<<< HEAD // Use serial if not using I2C #ifndef USE_I2C # define USE_SERIAL #endif +======= +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df // #define EE_HANDS #define I2C_MASTER_LEFT @@ -74,9 +81,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. ) /* ws2812 RGB LED */ +<<<<<<< HEAD #define RGB_DI_PIN D4 #define RGBLIGHT_TIMER #define RGBLED_NUM 8 // Number of LEDs +======= +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD +#define ws2812_pin PD1 +#define RGBLED_NUM 28 // Number of LEDs +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 @@ -99,4 +113,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION +<<<<<<< HEAD #endif +======= +#endif +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df diff --git a/keyboards/lets_split/rev1/rev1.c b/keyboards/lets_split/rev1/rev1.c index c505d3a6e3..41dd1e3535 100644 --- a/keyboards/lets_split/rev1/rev1.c +++ b/keyboards/lets_split/rev1/rev1.c @@ -24,9 +24,15 @@ void matrix_init_kb(void) { }; void shutdown_user(void) { +<<<<<<< HEAD #ifdef AUDIO_ENABLE PLAY_NOTE_ARRAY(tone_goodbye, false, 0); _delay_ms(150); stop_all_notes(); #endif +======= + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df } diff --git a/keyboards/lets_split/rev1/rev1.h b/keyboards/lets_split/rev1/rev1.h index 50bda03154..998b2be7c7 100644 --- a/keyboards/lets_split/rev1/rev1.h +++ b/keyboards/lets_split/rev1/rev1.h @@ -1,9 +1,15 @@ #ifndef REV1_H #define REV1_H +<<<<<<< HEAD #include "../lets_split.h" //void promicro_bootloader_jmp(bool program); +======= +#include "quantum.h" + +void promicro_bootloader_jmp(bool program); +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df #define KEYMAP( \ k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h index cd152e331f..19c137e56c 100644 --- a/keyboards/lets_split/rev2/config.h +++ b/keyboards/lets_split/rev2/config.h @@ -41,11 +41,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define USE_I2C +<<<<<<< HEAD // Use serial if not using I2C #ifndef USE_I2C # define USE_SERIAL #endif +======= +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df // #define EE_HANDS #define I2C_MASTER_LEFT @@ -74,9 +77,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. ) /* ws2812 RGB LED */ +<<<<<<< HEAD #define RGB_DI_PIN D3 #define RGBLIGHT_TIMER #define RGBLED_NUM 12 // Number of LEDs +======= +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD +#define ws2812_pin PD1 +#define RGBLED_NUM 28 // Number of LEDs +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 @@ -99,4 +109,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION +<<<<<<< HEAD #endif +======= +#endif +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c index c505d3a6e3..41dd1e3535 100644 --- a/keyboards/lets_split/rev2/rev2.c +++ b/keyboards/lets_split/rev2/rev2.c @@ -24,9 +24,15 @@ void matrix_init_kb(void) { }; void shutdown_user(void) { +<<<<<<< HEAD #ifdef AUDIO_ENABLE PLAY_NOTE_ARRAY(tone_goodbye, false, 0); _delay_ms(150); stop_all_notes(); #endif +======= + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df } diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h index a8b0f0f4c7..9e251ca57d 100644 --- a/keyboards/lets_split/rev2/rev2.h +++ b/keyboards/lets_split/rev2/rev2.h @@ -1,9 +1,15 @@ #ifndef REV2_H #define REV2_H +<<<<<<< HEAD #include "../lets_split.h" //void promicro_bootloader_jmp(bool program); +======= +#include "quantum.h" + +void promicro_bootloader_jmp(bool program); +>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df #define KEYMAP( \ k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ |