diff options
Diffstat (limited to 'keyboards/lets_split/pro_micro.h')
| -rw-r--r-- | keyboards/lets_split/pro_micro.h | 362 |
1 files changed, 0 insertions, 362 deletions
diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h deleted file mode 100644 index f9e7ed75d9..0000000000 --- a/keyboards/lets_split/pro_micro.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -// Workaround for wrong definitions in "iom32u4.h". -// This should be fixed in the AVR toolchain. -#undef UHCON -#undef UHINT -#undef UHIEN -#undef UHADDR -#undef UHFNUM -#undef UHFNUML -#undef UHFNUMH -#undef UHFLEN -#undef UPINRQX -#undef UPINTX -#undef UPNUM -#undef UPRST -#undef UPCONX -#undef UPCFG0X -#undef UPCFG1X -#undef UPSTAX -#undef UPCFG2X -#undef UPIENX -#undef UPDATX -#undef TCCR2A -#undef WGM20 -#undef WGM21 -#undef COM2B0 -#undef COM2B1 -#undef COM2A0 -#undef COM2A1 -#undef TCCR2B -#undef CS20 -#undef CS21 -#undef CS22 -#undef WGM22 -#undef FOC2B -#undef FOC2A -#undef TCNT2 -#undef TCNT2_0 -#undef TCNT2_1 -#undef TCNT2_2 -#undef TCNT2_3 -#undef TCNT2_4 -#undef TCNT2_5 -#undef TCNT2_6 -#undef TCNT2_7 -#undef OCR2A -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 -#undef OCR2B -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 - -#define NUM_DIGITAL_PINS 30 -#define NUM_ANALOG_INPUTS 12 - -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -static const uint8_t SDA = 2; -static const uint8_t SCL = 3; -#define LED_BUILTIN 13 - -// Map SPI port to 'new' pins D14..D17 -static const uint8_t SS = 17; -static const uint8_t MOSI = 16; -static const uint8_t MISO = 14; -static const uint8_t SCK = 15; - -// Mapping of analog pins as digital I/O -// A6-A11 share with digital pins -static const uint8_t ADC0 = 18; -static const uint8_t ADC1 = 19; -static const uint8_t ADC2 = 20; -static const uint8_t ADC3 = 21; -static const uint8_t ADC4 = 22; -static const uint8_t ADC5 = 23; -static const uint8_t ADC6 = 24; // D4 -static const uint8_t ADC7 = 25; // D6 -static const uint8_t ADC8 = 26; // D8 -static const uint8_t ADC9 = 27; // D9 -static const uint8_t ADC10 = 28; // D10 -static const uint8_t ADC11 = 29; // D12 - -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) - -// __AVR_ATmega32U4__ has an unusual mapping of pins to channels -extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) - -#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# PC6 ??? OC3A/#OC4A -// D6# A7 PD7 FastPWM #OC4D/ADC10 -// D7 PE6 INT6/AIN0 -// -// D8 A8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12 A11 PD6 T1/#OC4D/ADC9 -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 D18 PF7 ADC7 -// A1 D19 PF6 ADC6 -// A2 D20 PF5 ADC5 -// A3 D21 PF4 ADC4 -// A4 D22 PF1 ADC1 -// A5 D23 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digital pins -// -// MISO D14 PB3 MISO,PCINT3 -// SCK D15 PB1 SCK,PCINT1 -// MOSI D16 PB2 MOSI,PCINT2 -// SS D17 PB0 RXLED,SS/PCINT0 -// -// Connected LEDs on board for TX and RX -// TXLED D24 PD5 XCK1 -// RXLED D17 PB0 -// HWB PE2 HWB - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 - PD5 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(5), // D24 - PD5 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ - - NOT_ON_TIMER, - TIMER4A, /* 13 */ - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 -}; - -#endif /* ARDUINO_MAIN */ - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_USBVIRTUAL Serial -#define SERIAL_PORT_HARDWARE Serial1 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 - -#endif /* Pins_Arduino_h */ |