9 files changed, 20 insertions, 175 deletions
diff --git a/keyboards/kiwikey/borderland/config.h b/keyboards/kiwikey/borderland/config.h
index 42bc5644bd..a698476a5f 100644
--- a/keyboards/kiwikey/borderland/config.h
+++ b/keyboards/kiwikey/borderland/config.h
@@ -3,11 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
 
 /*
  * Keyboard Matrix Assignments
@@ -25,9 +20,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODERS_PAD_A { F5 }
-#define ENCODERS_PAD_B { F6 }
-#define ENCODER_RESOLUTION 4
 #define TAP_CODE_DELAY 10
 
 #define RGB_DI_PIN B2
@@ -48,51 +40,13 @@
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -108,7 +62,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kiwikey/borderland/info.json b/keyboards/kiwikey/borderland/info.json
index 2123268c2e..84b17c4385 100644
--- a/keyboards/kiwikey/borderland/info.json
+++ b/keyboards/kiwikey/borderland/info.json
@@ -8,6 +8,13 @@
         "pid": "0x424C",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "F5", "pin_b": "F6"}
+        ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/kiwikey/borderland/rules.mk b/keyboards/kiwikey/borderland/rules.mk
index c362ae9a8b..e44305c4ff 100644
--- a/keyboards/kiwikey/borderland/rules.mk
+++ b/keyboards/kiwikey/borderland/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/kiwikey/kawii9/config.h b/keyboards/kiwikey/kawii9/config.h
index 6da57ea422..086a8c839f 100644
--- a/keyboards/kiwikey/kawii9/config.h
+++ b/keyboards/kiwikey/kawii9/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 3
-#define MATRIX_COLS 3
 
 /*
  * Keyboard Matrix Assignments
@@ -40,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 #define RGB_DI_PIN D3    // Ver1: F0, Ver2: D3
-//#ifdef RGB_DI_PIN
 #define RGBLED_NUM 4
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
@@ -57,51 +51,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -117,7 +72,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kiwikey/kawii9/info.json b/keyboards/kiwikey/kawii9/info.json
index ad8ae3679a..e1511b544c 100644
--- a/keyboards/kiwikey/kawii9/info.json
+++ b/keyboards/kiwikey/kawii9/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0303",
         "device_version": "0.0.2"
     },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_ortho_3x3": {
             "layout": [
diff --git a/keyboards/kiwikey/kawii9/rules.mk b/keyboards/kiwikey/kawii9/rules.mk
index f57e786cbc..a6f559ca77 100644
--- a/keyboards/kiwikey/kawii9/rules.mk
+++ b/keyboards/kiwikey/kawii9/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/kiwikey/wanderland/config.h b/keyboards/kiwikey/wanderland/config.h
index 107054a089..5332a91304 100644
--- a/keyboards/kiwikey/wanderland/config.h
+++ b/keyboards/kiwikey/wanderland/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 13
 
 /*
  * Keyboard Matrix Assignments
@@ -39,17 +34,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Indicator LEDs Assignments */
-#define LED_NUM_LOCK_PIN C6
-#define LED_CAPS_LOCK_PIN B6
-#define LED_SCROLL_LOCK_PIN B5
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_LEVELS 3
-#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN F7
-//#ifdef RGB_DI_PIN
 #define RGBLED_NUM 18
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
@@ -66,51 +51,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-//#endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -126,7 +72,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/kiwikey/wanderland/info.json b/keyboards/kiwikey/wanderland/info.json
index 92dfb2fff6..3bab46fb4a 100644
--- a/keyboards/kiwikey/wanderland/info.json
+++ b/keyboards/kiwikey/wanderland/info.json
@@ -8,6 +8,17 @@
         "pid": "0x574C",
         "device_version": "0.0.1"
     },
+    "backlight": {
+        "pin": "B7",
+        "breathing": true
+    },
+    "indicators": {
+        "caps_lock": "B6",
+        "num_lock": "C6",
+        "scroll_lock": "B5"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "atmel-dfu",
     "layouts": {
         "LAYOUT_alice_split_bs": {
             "layout": [
diff --git a/keyboards/kiwikey/wanderland/rules.mk b/keyboards/kiwikey/wanderland/rules.mk
index 3b061c1108..85830d3115 100644
--- a/keyboards/kiwikey/wanderland/rules.mk
+++ b/keyboards/kiwikey/wanderland/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
 # Build Options
 #   change yes to no to disable
 #