diff options
Diffstat (limited to 'keyboards/kc60')
31 files changed, 1173 insertions, 0 deletions
diff --git a/keyboards/kc60/Makefile b/keyboards/kc60/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/kc60/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h new file mode 100644 index 0000000000..29695d0b9d --- /dev/null +++ b/keyboards/kc60/config.h @@ -0,0 +1,164 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT kc60v2 +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0 +// Pins for rows include: D0 D1 F6 F7 D5 +// KC60 Version 2 +#define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/kc60/kc60.c b/keyboards/kc60/kc60.c new file mode 100644 index 0000000000..746ac634a3 --- /dev/null +++ b/keyboards/kc60/kc60.c @@ -0,0 +1 @@ +#include "kc60.h" diff --git a/keyboards/kc60/kc60.h b/keyboards/kc60/kc60.h new file mode 100644 index 0000000000..c3a0165c09 --- /dev/null +++ b/keyboards/kc60/kc60.h @@ -0,0 +1,94 @@ +#ifndef KC60_H +#define KC60_H + +#include "quantum.h" + +// K49 key is for the key at row 1 and column 15 when you split the backspace in 2 1U key. + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a multi-dimensional array +/* + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | K49 | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | + * |-----------------------------------------------------------------------------------------+ + * | K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3D | K3C | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */ +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ + ) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ +} + +#endif + +/* Default layout + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | + * |-----------------------------------------------------------------------------------------+ + * | K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */ + +/* Mini Lshift + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | + * |-----------------------------------------------------------------------------------------+ + * | K30 |K31| K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */ + +/* Mini Rshift + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | + * |-----------------------------------------------------------------------------------------+ + * | K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | K3D | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */ + +/* Mini Enter + * ,-----------------------------------------------------------------------------------------. + * | K00 | K01 | K02 | K03 | K04 | K05 | K06 | K07 | K08 | K09 | K0A | K0B | K0C | K0D | + * |-----------------------------------------------------------------------------------------+ + * | K10 | K11 | K12 | K13 | K14 | K15 | K16 | K17 | K18 | K19 | K1A | K1B | K1C | K1D | + * |-----------------------------------------------------------------------------------------+ + * | K20 | K21 | K22 | K23 | K24 | K25 | K26 | K17 | K28 | K29 | K2A | K2B | K2C | K2D | + * |-----------------------------------------------------------------------------------------+ + * | K30 | K32 | K33 | K34 | K35 | K36 | K37 | K38 | K39 | K3A | K3B | K3C | + * |-----------------------------------------------------------------------------------------+ + * | K40 | K41 | K42 | K45 | K4A | K4B | K4C | K4D | + * `-----------------------------------------------------------------------------------------' + */
\ No newline at end of file diff --git a/keyboards/kc60/keymaps/dbroqua/keymap.c b/keyboards/kc60/keymaps/dbroqua/keymap.c new file mode 100644 index 0000000000..1b645ea938 --- /dev/null +++ b/keyboards/kc60/keymaps/dbroqua/keymap.c @@ -0,0 +1,103 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +#define _QWERTY 0 +#define _FNCAPS 1 +#define _FNRIGHTSHIFT 2 + +// Fillers to make layering more clear +#define ______ KC_TRNS +#define XXXXXXX KC_NO + +// Func macro definitions. +#define S_LED FUNC(0) +#define S_LEDI FUNC(1) +#define S_LEDD FUNC(2) + +// Enable these functions using FUNC(n) macro. +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_BACKLIGHT_TOGGLE(), + [1] = ACTION_BACKLIGHT_INCREASE(), + [2] = ACTION_BACKLIGHT_DECREASE() + }; + +/* + * | | | + * | | | + * | | | + * | | | + * | | + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Caps/FN1| A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | Up | FN2 | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | Gui | Alt | Space | AltGr | Left | Down | Right | + * `-----------------------------------------------------------------------------------------' + */ + [0] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + LT(_FNCAPS, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(_FNRIGHTSHIFT), KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_GRV, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT \ + ), + +/* Layer 1 + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | Psc | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | Led | Led-| Led+| | Mute| Vol+| Vol-| | | | Play | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | Prev | Stop | Next | + * `-----------------------------------------------------------------------------------------' + */ + [_FNCAPS] = KEYMAP( /* Layer 1 */ + ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, KC_PSCR,______, ______, ______, ______, ______, ______, \ + ______, ______, S_LED, S_LEDI, S_LEDD,______,KC_MUTE,KC_VOLU,KC_VOLD,______, ______, ______, ______,KC_MPLY, \ + ______, ______, ______, ______, KC_DEL, ______, KC_MPRV, KC_MSTP, KC_MNXT \ + ), + +/* Layer 2 + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | PgUp | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | Home | PgDown| End | + * `-----------------------------------------------------------------------------------------' + */ + [_FNRIGHTSHIFT] = KEYMAP( /* Layer 2 */ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \ + ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PGUP, \ + ______, ______, ______, ______, ______, ______, KC_HOME,KC_PGDN,KC_END \ + ), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/dbroqua/readme.md b/keyboards/kc60/keymaps/dbroqua/readme.md new file mode 100644 index 0000000000..b71d10ab04 --- /dev/null +++ b/keyboards/kc60/keymaps/dbroqua/readme.md @@ -0,0 +1,11 @@ +# Dbroqua Layout + +* Online keyboard layout editor: http://www.keyboard-layout-editor.com/#/gists/24fa7821d4955ec3c76037c8e159a199 +* Online keyboard layout editor (caps layer): http://www.keyboard-layout-editor.com/#/gists/4136d4d1555d6f0d9403c21aaf50fd37 +* Online keyboard layout editor (fn2 layer): http://www.keyboard-layout-editor.com/#/gists/cf4955f73f339020dbb41c15364e7e4f + +# Programming Instructions: +Enter into programming mode and run the following command. +``` +$ sudo KEYMAP=dbroqua make dfu +```
\ No newline at end of file diff --git a/keyboards/kc60/keymaps/default/keymap.c b/keyboards/kc60/keymaps/default/keymap.c new file mode 100644 index 0000000000..293ff3ab46 --- /dev/null +++ b/keyboards/kc60/keymaps/default/keymap.c @@ -0,0 +1,24 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, RESET \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/sgoodwin/keymap.c b/keyboards/kc60/keymaps/sgoodwin/keymap.c new file mode 100644 index 0000000000..3192b25142 --- /dev/null +++ b/keyboards/kc60/keymaps/sgoodwin/keymap.c @@ -0,0 +1,42 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * Toggles between colemak and qwerty by tapping the bottom right key. + * Holding capslock key gives a layer like the KBParadise v60. + */ + [0] = KEYMAP( /* Basic Colemak */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(2), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, DF(1) \ + ), + [1] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + MO(2), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI, KC_RALT, KC_RCTL, DF(0) \ + ), + [2] = KEYMAP( /* KBP v60-like arrows, media keys, etc */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, BL_INC, BL_DEC, BL_STEP, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_NO, KC_TRNS, \ + KC_TRNS, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_NO, DEBUG, RESET, KC_TRNS, KC_NO \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/stanleylai/Makefile b/keyboards/kc60/keymaps/stanleylai/Makefile new file mode 100644 index 0000000000..b8b2beda48 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE ?= yes # Enable WS2812 underglow RGB strip +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kc60/keymaps/stanleylai/base_layer.png b/keyboards/kc60/keymaps/stanleylai/base_layer.png Binary files differnew file mode 100644 index 0000000000..97235c6af4 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/base_layer.png diff --git a/keyboards/kc60/keymaps/stanleylai/config.h b/keyboards/kc60/keymaps/stanleylai/config.h new file mode 100644 index 0000000000..b5024a6d02 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/config.h @@ -0,0 +1,3 @@ +// Use configs from WS2812 enabled Keymap + +#include "../ws2812/config.h" diff --git a/keyboards/kc60/keymaps/stanleylai/keymap.c b/keyboards/kc60/keymaps/stanleylai/keymap.c new file mode 100644 index 0000000000..212fa88bd0 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/keymap.c @@ -0,0 +1,86 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RGBL 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// See base_layer.png and rgb_layer.png for layout reference + +// Base Default Layer +// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions. +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, MO(_FL), KC_UP, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_RGUI,KC_LEFT, KC_DOWN, KC_RGHT), + +// Function layer +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_NO, KC_MPRV,KC_UP, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR,KC_SLCK, KC_PAUS, KC_INS, \ + KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS,KC_NO, KC_MUTE,KC_VOLD,KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, LT(_RGBL, KC_PGUP),\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_MPLY, KC_NO, KC_TRNS,KC_HOME, KC_PGDN, KC_END), + +// RGB Layer +[_RGBL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS,KC_NO, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_NO, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), + #else + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ + KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_NO, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS), + #endif +}; + + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/kc60/keymaps/stanleylai/readme.md b/keyboards/kc60/keymaps/stanleylai/readme.md new file mode 100644 index 0000000000..1db72610d4 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/readme.md @@ -0,0 +1,26 @@ +Stanley Lai's Split Right Shift with Dedicated Arrow Keys +====================== + + + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Keymap Notes +- Keymap setup with split Right Shift in mind. +- Right-side modifiers are setup as dedicated arrow keys + +### Base Layer Reference +- Fn Layer indicated on keycap front legends. +- Tapping Caps Lock key toggles Caps. Holding it down momentarily switches us to the Fn Layer. +- Holding down "Fn" and "Page Down" momentarily switches us to the RGB Layer. Tapping "Page Down" behaves as expected. + + +### RGB Layer Reference + + +## WS2812 Support +By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](../ws2812/ws2812_wiring.jpg) for wiring reference. + +### Build +To build this keymap, simply run `make KEYMAP=stanleylai`. diff --git a/keyboards/kc60/keymaps/stanleylai/rgb_layer.png b/keyboards/kc60/keymaps/stanleylai/rgb_layer.png Binary files differnew file mode 100644 index 0000000000..2bba028bb3 --- /dev/null +++ b/keyboards/kc60/keymaps/stanleylai/rgb_layer.png diff --git a/keyboards/kc60/keymaps/wigguno/Makefile b/keyboards/kc60/keymaps/wigguno/Makefile new file mode 100644 index 0000000000..0d7d918d88 --- /dev/null +++ b/keyboards/kc60/keymaps/wigguno/Makefile @@ -0,0 +1,24 @@ + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= yes # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kc60/keymaps/wigguno/keymap.c b/keyboards/kc60/keymaps/wigguno/keymap.c new file mode 100644 index 0000000000..dca2826eb1 --- /dev/null +++ b/keyboards/kc60/keymaps/wigguno/keymap.c @@ -0,0 +1,62 @@ +// This keymap was designed to close to the default kc60 layout, with some useful changes, such as adding media keys. +// It also moves the reset key off the base layer, as in the default kc60 layout for this firmware. +// I have swapped FN and RGUI as my rainbow keyset has them in the opposite order. + +#include "kc60.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Basic QWERTY + * ,-----------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |FN |Gui |Ctrl | + * `-----------------------------------------------------------' + */ + [0] = KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, MO(1), KC_RGUI, KC_RCTL \ + ), + + /* + * ,-----------------------------------------------------------. + * | ` |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Del | + * |-----------------------------------------------------------| + * | | | Up| | | | | | | | PS| | | | + * |-----------------------------------------------------------| + * | |Lft|Dwn|Rgt| |BL-|BL+| | | | | | | + * |-----------------------------------------------------------| + * | |Prv| PP|Nxt| | | | |Hom|End| | | + * |-----------------------------------------------------------| + * | Rst| | | BL | | | | | + * `-----------------------------------------------------------' + * PS = Print Screen + * PP = Play/Pause + */ + [1] = KEYMAP( /* Function Layer */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DELETE, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, BL_DEC, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, \ + RESET, KC_TRNS, KC_TRNS, BL_TOGG, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/wigguno/readme.md b/keyboards/kc60/keymaps/wigguno/readme.md new file mode 100644 index 0000000000..55a9f60c7c --- /dev/null +++ b/keyboards/kc60/keymaps/wigguno/readme.md @@ -0,0 +1,14 @@ +Wigguno's KC60 Layout +====================== + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Changes from default QMK layout +The default QMK layout for KC60 does not have a function layer. It also has the bootloader-mode reset key bound. This keymap fixes both of these by adding a sensible function layer (including moving the reset key onto it, far away from the FN key). + +### Changes from the default KC60 layout +The default KC60 layout is good, but it was missing media keys. I've added previous, play/pause and next. I've also removed some of the keys from the function layer I didn't use. + +### Build +To enable NKRO you must be in the keymaps/wigguno directory when running make. diff --git a/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png b/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png Binary files differnew file mode 100644 index 0000000000..cc6a630a59 --- /dev/null +++ b/keyboards/kc60/keymaps/workman-dead/kc60-wm-dead.png diff --git a/keyboards/kc60/keymaps/workman-dead/keymap.c b/keyboards/kc60/keymaps/workman-dead/keymap.c new file mode 100644 index 0000000000..9e3b9bb656 --- /dev/null +++ b/keyboards/kc60/keymaps/workman-dead/keymap.c @@ -0,0 +1,183 @@ +#include "kc60.h" + +#define _WM 0 +#define _QW 1 +#define _DK 2 +#define _FUN 3 +#define _MS 4 + +#define _______ KC_NO +#define XXXXXXX KC_TRNS + +#define _DK_ACT 0 +#define _DK_REL 1 +#define _KC_COMS 2 +#define _KC_CENT 3 + +#define DK_ACT M(_DK_ACT) // activate dead key layer +#define DK_REL M(_DK_REL) // release dead key layer +#define KC_COMS M(_KC_COMS) // comma + space +#define KC_CENT M(_KC_CENT) // comma + enter +#define KC_TABM LT(_MS, KC_TAB) // press for tab, hold for mouse layer +#define KC_SPFN LT(_FUN, KC_SPC) // press for space, hold for function layer (aka spacefn) +#define KC_DFQW DF(_QW) // set default layer to qwerty +#define KC_DFWM DF(_WM) // set default layer to workman +#define KC_CMDQ LGUI(KC_Q) // command + q +#define KC_CMDD LGUI(KC_D) // command + d +#define KC_CMDA LGUI(KC_A) // command + a +#define KC_CMDS LGUI(KC_S) // command + s +#define KC_CMDZ LGUI(KC_Z) // command + z +#define KC_CMDX LGUI(KC_X) // command + x +#define KC_CMDC LGUI(KC_C) // command + c +#define KC_CMDV LGUI(KC_V) // command + v +#define KC_CSTB S(RCTL(KC_TAB)) // shift + control + tab +#define KC_C_TB RCTL(KC_TAB) // control + tab +#define KC_C_LF RCTL(KC_LEFT) // control + left +#define KC_C_RT RCTL(KC_RGHT) // control + right + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// Workman +/* +* ,-----------------------------------------------------------. +* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp | +* |-----------------------------------------------------------| +* |Tab/M| Q| D| R| W| B| J| F| U| P| ;| [| ]| \ | +* |-----------------------------------------------------------| +* |Ctrl | A| S| H| T| G| Y| N| E| O| I| '| Return | +* |-----------------------------------------------------------| +* |Shift | Z| X| M| C| V| K| L| ,| .| /| Shift | +* |-----------------------------------------------------------| +* |Ctrl | Alt | GUI | Space/FN | Alt | GUI | Ctrl | qwerty | +* `-----------------------------------------------------------' +*/ +[_WM] = KEYMAP( /* Workman */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TABM, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT, _______, KC_ENT, \ + KC_LSFT, _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, DK_ACT, KC_DOT, KC_SLSH, _______, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPFN, _______, KC_RALT, KC_RGUI, KC_RCTL, KC_DFQW), + +// QWERTY +/* +* ,-----------------------------------------------------------. +* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Bsp | +* |-----------------------------------------------------------| +* |Tab/M| Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | +* |-----------------------------------------------------------| +* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return | +* |-----------------------------------------------------------| +* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | +* |-----------------------------------------------------------| +* |Ctrl | Alt | GUI | Space/FN | Alt | GUI | Ctrl | workman | +* `-----------------------------------------------------------' +*/ +[_QW] = KEYMAP( /* QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TABM, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, _______, KC_ENT, \ + KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, DK_ACT, KC_DOT, KC_SLSH, _______, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPFN, _______, KC_RALT, KC_RGUI, KC_RCTL, KC_DFWM), + +// dead key layer +/* +* ,-----------------------------------------------------------. +* | | | | | | | | | | | | | | Bsp | +* |-----------------------------------------------------------| +* | | %| &| ?| +| @| $| _| [| ]| !| ~| ^| | +* |-----------------------------------------------------------| +* | | #| (| =| 0| {| }| 1| *| )| -| `| Return | +* |-----------------------------------------------------------| +* | | 6| 7| 8| 9| || \| 2| 3| 4| 5| | +* |-----------------------------------------------------------| +* |Ctrl | Alt | GUI | , | Alt | GUI | Ctrl | | +* `-----------------------------------------------------------' +*/ +[_DK] = KEYMAP( /* dead key layer */ + XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, \ + XXXXXXX, KC_PERC, KC_AMPR, KC_QUES, KC_PLUS, KC_AT, KC_DLR, KC_UNDS, KC_LBRC, KC_RBRC, KC_EXLM, KC_TILD, KC_CIRC, _______, \ + _______, KC_HASH, KC_LPRN, KC_EQL, KC_0, KC_LCBR, KC_RCBR, KC_1, KC_ASTR, KC_RPRN, KC_MINS, KC_GRV, _______, KC_CENT, \ + _______, _______, KC_6, KC_7, KC_8, KC_9, KC_PIPE, KC_BSLS, KC_2, DK_REL, KC_4, KC_5, _______, _______, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_COMS, _______, KC_RALT, KC_RGUI, KC_RCTL, _______), + +// function layer +/* +* ,-----------------------------------------------------------. +* | | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|Del | +* |-----------------------------------------------------------| +* |Esc | Cq| Cd|cstb|ctb| | |pgd| up|pgu| | | |ins | +* |-----------------------------------------------------------| +* |Shift | Ca| Cs|clt|crt| | | lt| dw| rt|home|end| Bsp | +* |-----------------------------------------------------------| +* |Shift | Cz| Cx| | Cc| Cv| V-| V+|mute| | | | +* |-----------------------------------------------------------| +* |Ctrl | Alt | GUI | | Alt | GUI | Ctrl | Reset | +* `-----------------------------------------------------------' +*/ +[_FUN] = KEYMAP( /* function layer */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_ESC, KC_CMDQ, KC_CMDD, KC_CSTB, KC_C_TB, _______, _______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, KC_INS, \ + KC_LSFT, KC_CMDA, KC_CMDS, KC_C_LF, KC_C_RT, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, KC_END, _______, KC_BSPC, \ + KC_LSFT, _______, KC_CMDZ, KC_CMDX, _______, KC_CMDC, KC_CMDV, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_TRNS, _______, KC_RALT, KC_RGUI, KC_RCTL, RESET), + +// mouse layer +/* +* ,-----------------------------------------------------------. +* | | | | | | | | | | | | | | | +* |-----------------------------------------------------------| +* | |fast|med|slow| | | | | up| | | | | | +* |-----------------------------------------------------------| +* | | | | | | | | lt| dw| rt| rc| | | +* |-----------------------------------------------------------| +* | | | | | | | | | | | | | +* |-----------------------------------------------------------| +* | | | | lc | | | | | +* `-----------------------------------------------------------' +*/ +[_MS] = KEYMAP( /* mouse layer */ + XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + XXXXXXX, KC_ACL2, KC_ACL1, KC_ACL0, _______, _______, _______, _______, KC_MS_U, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN2, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case _KC_COMS: + if (record->event.pressed) { + return MACRO(T(COMM), T(SPC), END); // comma + space + } + break; + case _KC_CENT: + if (record->event.pressed) { + return MACRO(T(COMM), T(ENT), END); // comma + enter + } + break; + case _DK_ACT: + if (record->event.pressed) { + if (keyboard_report->mods & MOD_BIT(KC_LSFT) || keyboard_report->mods & MOD_BIT(KC_RSFT)) { // act as comma when shift is pressed (eg <) + register_code(KC_COMM); + } else { // activate oneshot dead key layer otherwise + layer_on(_DK); + set_oneshot_layer(_DK, ONESHOT_START); + } + } else { // make sure to deactive dead key layer on key release + clear_oneshot_layer_state(ONESHOT_PRESSED); + unregister_code(KC_COMM); + } + break; + case _DK_REL: + if (record->event.pressed) { // act as 3 on keypress + register_code(KC_3); + } else { // make sure to deactive dead key layer on key release + clear_oneshot_layer_state(ONESHOT_PRESSED); + unregister_code(KC_3); + } + break; + } + + return MACRO_NONE; +}; diff --git a/keyboards/kc60/keymaps/workman-dead/readme.md b/keyboards/kc60/keymaps/workman-dead/readme.md new file mode 100644 index 0000000000..f1fcdc9606 --- /dev/null +++ b/keyboards/kc60/keymaps/workman-dead/readme.md @@ -0,0 +1,17 @@ +# Workman dead with spacefn (kc60 @ QMK) + +## Layout reference + + +## Build + +To build this keymap, simply run `make KEYMAP=workman-dead`. + +## Notes + +* the default layout is `workman` (try it out, it's awesome!), but it can be changed to `qwerty` with the `rebel` key (the function layer won't change though) +* `comma` acts as a dead key, that means tapping/holding it will activate the **oneshot** `dead key` layer (marked red in the reference) +* hold `space` to access the `function` layer (marked blue in the reference) +* hold `tab` to activate the mouse layer +* the `function` layer contains mostly osx specific shortcuts +* on the right side of the bottom row `alt` and `super` are switched compared to a standard layout diff --git a/keyboards/kc60/keymaps/ws2812/Makefile b/keyboards/kc60/keymaps/ws2812/Makefile new file mode 100644 index 0000000000..891c444162 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/Makefile @@ -0,0 +1,25 @@ + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE ?= yes # Enable WS2812 underglow RGB strip +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/kc60/keymaps/ws2812/config.h b/keyboards/kc60/keymaps/ws2812/config.h new file mode 100644 index 0000000000..2f39ea8e55 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/config.h @@ -0,0 +1,9 @@ +#include "../../config.h" + +/* WS2812B RGB Underglow LED */ +#define RGB_DI_PIN F5 // Based on wiring depicted in ws2812_wiring.jpg +#define RGBLIGHT_TIMER +#define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/kc60/keymaps/ws2812/keymap.c b/keyboards/kc60/keymaps/ws2812/keymap.c new file mode 100644 index 0000000000..ae11ebf91c --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/keymap.c @@ -0,0 +1,98 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "kc60.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-----------------------------------------------------------. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | + * |-----------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | + * `-----------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_NO, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT,KC_RGUI, MO(_FL), KC_RCTL), + + /* Keymap _FL: Function Layer + * ,-----------------------------------------------------------. + * |~ |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | + * |-----------------------------------------------------------| + * | | |UP | | | | | | | | |BL-|BL+|BL | + * |-----------------------------------------------------------| + * | |LFT|DWN|RGT| | | | | | | | | + * |-----------------------------------------------------------| + * | |FN1|FN2|FN3|FN4|FN5|FN6|FN7|FN8| | | | + * |-----------------------------------------------------------| + * | | | | | | | |RSET| + * `-----------------------------------------------------------' + */ +[_FL] = KEYMAP( + #ifdef RGBLIGHT_ENABLE + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, RESET), + #else + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, RESET), + #endif +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboards/kc60/keymaps/ws2812/readme.md b/keyboards/kc60/keymaps/ws2812/readme.md new file mode 100644 index 0000000000..5588fd2d97 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/readme.md @@ -0,0 +1,21 @@ +KC60 with WS2812 RGB Underglow +====================== + + + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## WS2812 Support +By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](ws2812_wiring.jpg) for wiring reference. + +### Build +To build this keymap with WS2812 enabled, simply run `make KEYMAP=ws2812`. + +### Reference Images + + + + +### Additional Credits +Keymap based on work by [TerryMatthews](https://github.com/TerryMathews) for GH60 Satan. diff --git a/keyboards/kc60/keymaps/ws2812/ws2812_example.jpg b/keyboards/kc60/keymaps/ws2812/ws2812_example.jpg Binary files differnew file mode 100644 index 0000000000..5c62cfded3 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/ws2812_example.jpg diff --git a/keyboards/kc60/keymaps/ws2812/ws2812_underside-lit.jpg b/keyboards/kc60/keymaps/ws2812/ws2812_underside-lit.jpg Binary files differnew file mode 100644 index 0000000000..2eab21433a --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/ws2812_underside-lit.jpg diff --git a/keyboards/kc60/keymaps/ws2812/ws2812_underside.jpg b/keyboards/kc60/keymaps/ws2812/ws2812_underside.jpg Binary files differnew file mode 100644 index 0000000000..159d63904f --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/ws2812_underside.jpg diff --git a/keyboards/kc60/keymaps/ws2812/ws2812_wiring.jpg b/keyboards/kc60/keymaps/ws2812/ws2812_wiring.jpg Binary files differnew file mode 100644 index 0000000000..61b749b667 --- /dev/null +++ b/keyboards/kc60/keymaps/ws2812/ws2812_wiring.jpg diff --git a/keyboards/kc60/led.c b/keyboards/kc60/led.c new file mode 100644 index 0000000000..50659d7247 --- /dev/null +++ b/keyboards/kc60/led.c @@ -0,0 +1,31 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output low + DDRB |= (1<<2); + PORTB &= ~(1<<2); + } else { + // Hi-Z + DDRB &= ~(1<<2); + PORTB &= ~(1<<2); + } +}
\ No newline at end of file diff --git a/keyboards/kc60/readme.md b/keyboards/kc60/readme.md new file mode 100644 index 0000000000..da84f6159a --- /dev/null +++ b/keyboards/kc60/readme.md @@ -0,0 +1,36 @@ +KC60 (version 2.0) keyboard firmware +====================== + +## Quantum MK Firmware +For the full Quantum feature list, see [the parent readme.md](/readme.md). + +## Building +Download or clone the whole firmware and navigate to the keyboards/kc60 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default +To build with the default keymap, simply run `make default`. + +### Other Keymaps +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. + +## WS2812 Support + + +Build with WS2812 Support by running `make ws2812`. + +## Warning +For those who want to use 2x1U instead of classic backspace you need to use K0D and K49 like this: +* K0D represents the key at the right of =. +* K49 represents the last key of the row (is wired at the right of the space key on the PCB) + +In kc60.h I've put several definitions' examples of possible layouts proposed by online editor (http://123.57.250.164:9128/). diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk new file mode 100644 index 0000000000..a935ed19ee --- /dev/null +++ b/keyboards/kc60/rules.mk @@ -0,0 +1,71 @@ +# project specific files +SRC = led.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 |
