summaryrefslogtreecommitdiff
path: root/keyboards/kc60/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/kc60/config.h')
-rw-r--r--keyboards/kc60/config.h92
1 files changed, 67 insertions, 25 deletions
diff --git a/keyboards/kc60/config.h b/keyboards/kc60/config.h
index 7c6e695a45..c58aedd76f 100644
--- a/keyboards/kc60/config.h
+++ b/keyboards/kc60/config.h
@@ -20,12 +20,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "config_common.h"
/* USB Device descriptor parameter */
-#define VENDOR_ID 0x530A
-#define PRODUCT_ID 0x6FFC
-#define DEVICE_VER 0x0001
-#define MANUFACTURER NPKC
-#define PRODUCT KC60
-#define DESCRIPTION QMK Firmware: KC60
+#define VENDOR_ID 0x530A
+#define PRODUCT_ID 0x6FFC
+#define DEVICE_VER 0x0001
+#define MANUFACTURER NPKC
+#define PRODUCT KC60
/* key matrix size */
#define MATRIX_ROWS 5
@@ -45,39 +44,39 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
-/* COL2ROW, ROW2COL*/
+/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN B6
-#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 5
+#define BACKLIGHT_BREATHING
-#ifdef RGBLIGHT_ENABLE
-# define RGB_DI_PIN F5
-# define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case.
+#define RGB_DI_PIN F5
+#ifdef RGB_DI_PIN
+# define RGBLED_NUM 16
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
# define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
-// # define RGBLIGHT_EFFECT_BREATHING
-// # define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// # define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// # define RGBLIGHT_EFFECT_SNAKE
-// # define RGBLIGHT_EFFECT_KNIGHT
-// # define RGBLIGHT_EFFECT_CHRISTMAS
-// # define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// # define RGBLIGHT_EFFECT_RGB_TEST
-// # define RGBLIGHT_EFFECT_ALTERNATING
+//# define RGBLIGHT_EFFECT_BREATHING
+//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//# define RGBLIGHT_EFFECT_SNAKE
+//# define RGBLIGHT_EFFECT_KNIGHT
+//# define RGBLIGHT_EFFECT_CHRISTMAS
+//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//# define RGBLIGHT_EFFECT_RGB_TEST
+//# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
-// # define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// # define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
@@ -91,9 +90,52 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0