4 files changed, 7 insertions, 49 deletions
diff --git a/keyboards/handwired/gamenum/config.h b/keyboards/handwired/gamenum/config.h
index eb9efef846..95477b88f0 100644
--- a/keyboards/handwired/gamenum/config.h
+++ b/keyboards/handwired/gamenum/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 4
 
 /*
  * Keyboard Matrix Assignments
@@ -38,18 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
- 
-// #define BACKLIGHT_PIN C6
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
@@ -57,27 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/handwired/gamenum/info.json b/keyboards/handwired/gamenum/info.json
index a2d4bb3ce4..daf77d1784 100644
--- a/keyboards/handwired/gamenum/info.json
+++ b/keyboards/handwired/gamenum/info.json
@@ -8,6 +8,8 @@
     "pid": "0x5678",
     "device_version": "0.0.1"
   },
+  "processor": "atmega32u4",
+  "bootloader": "caterina",
   "layouts": {
     "LAYOUT": {
       "layout": [
diff --git a/keyboards/handwired/gamenum/readme.md b/keyboards/handwired/gamenum/readme.md
index ee28cc1822..daefef48cc 100644
--- a/keyboards/handwired/gamenum/readme.md
+++ b/keyboards/handwired/gamenum/readme.md
@@ -46,11 +46,11 @@ Next thing to do is to add the actual layer for the keymap.
 
 ```
   [DEF] = LAYOUT(
-    KC_FN0,  KC_SLSH, KC_ASTR, KC_MINS, \
-    KC_7,    KC_8,    KC_9,    KC_PLUS, \
-    KC_4,    KC_5,    KC_6,             \
-    KC_1,    KC_2,    KC_3,             \
-    KC_0,             KC_DOT,  KC_ENT   \
+    KC_FN0,  KC_SLSH, KC_ASTR, KC_MINS,
+    KC_7,    KC_8,    KC_9,    KC_PLUS,
+    KC_4,    KC_5,    KC_6,
+    KC_1,    KC_2,    KC_3,
+    KC_0,             KC_DOT,  KC_ENT
   )
 ```
 
diff --git a/keyboards/handwired/gamenum/rules.mk b/keyboards/handwired/gamenum/rules.mk
index 63aadefc79..b6e2a5f9a4 100644
--- a/keyboards/handwired/gamenum/rules.mk
+++ b/keyboards/handwired/gamenum/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #