summaryrefslogtreecommitdiff
path: root/keyboards/gh60/keymaps
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/gh60/keymaps')
-rw-r--r--keyboards/gh60/keymaps/bluezio/keymap.c38
-rw-r--r--keyboards/gh60/keymaps/bluezio/rules.mk68
-rw-r--r--keyboards/gh60/keymaps/chaser/README.md96
-rw-r--r--keyboards/gh60/keymaps/chaser/keymap.c328
-rw-r--r--keyboards/gh60/keymaps/dbroqua/config.h175
-rw-r--r--keyboards/gh60/keymaps/dbroqua/keymap.c196
-rw-r--r--keyboards/gh60/keymaps/dbroqua/rules.mk107
-rw-r--r--keyboards/gh60/keymaps/dbroqua_7U/keymap.c87
-rw-r--r--keyboards/gh60/keymaps/dbroqua_7U/rules.mk107
-rw-r--r--keyboards/gh60/keymaps/default/keymap.c52
-rw-r--r--keyboards/gh60/keymaps/emiilsd/keymap.c48
-rwxr-xr-xkeyboards/gh60/keymaps/maartenwut/keymap.c47
-rw-r--r--keyboards/gh60/keymaps/maxr1998/config.h30
-rw-r--r--keyboards/gh60/keymaps/maxr1998/keymap.c83
-rw-r--r--keyboards/gh60/keymaps/maxr1998/rules.mk6
-rw-r--r--keyboards/gh60/keymaps/robotmaxtron/config.h178
-rw-r--r--keyboards/gh60/keymaps/robotmaxtron/keymap.c225
-rw-r--r--keyboards/gh60/keymaps/robotmaxtron/readme.md16
-rw-r--r--keyboards/gh60/keymaps/robotmaxtron/rules.mk107
-rw-r--r--keyboards/gh60/keymaps/sethbc/keymap.c75
-rw-r--r--keyboards/gh60/keymaps/sethbc/rules.mk0
-rw-r--r--keyboards/gh60/keymaps/xyverz/keymap.c142
22 files changed, 0 insertions, 2211 deletions
diff --git a/keyboards/gh60/keymaps/bluezio/keymap.c b/keyboards/gh60/keymaps/bluezio/keymap.c
deleted file mode 100644
index c0f650ecc5..0000000000
--- a/keyboards/gh60/keymaps/bluezio/keymap.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include QMK_KEYBOARD_H
-
-// lshift split, backspace split, full ANSI enter, full right shift
-#define KEYMAP_BZIO( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
- K40, K41, K42, K45, K4A, K4B, K4C, K4D \
- ) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \
- { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \
- }
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: HHKB with hyper key where ctrl used to be, and right half of left
- shift used as a key lock */
- KEYMAP_BZIO(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,\
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,\
- KC_LSFT, KC_LOCK, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
- KC_HYPR, KC_LGUI, KC_LALT, LT(1, KC_SPC), KC_RALT, KC_RGUI, KC_APP, KC_RCTL),
-
- /* 1: spacefn with WASD arrows/navigation block and extra space key for
- realignment of source code, plus IJKL mouse arrows, volume up/down in <>,
- and caps lock where it used to be */
- KEYMAP_BZIO(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_PGUP, KC_UP, KC_PGDOWN, KC_INSERT, KC_MS_BTN2, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \
- KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_DELETE, KC_MS_BTN1, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_HOME, KC_SPC, KC_END, KC_PSCREEN, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};
diff --git a/keyboards/gh60/keymaps/bluezio/rules.mk b/keyboards/gh60/keymaps/bluezio/rules.mk
deleted file mode 100644
index 4b820c974b..0000000000
--- a/keyboards/gh60/keymaps/bluezio/rules.mk
+++ /dev/null
@@ -1,68 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-# CONSOLE_ENABLE = yes # Console for debug(+400)
-# COMMAND_ENABLE = yes # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-# MIDI_ENABLE = YES # MIDI controls
-# UNICODE_ENABLE = YES # Unicode
-# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
-KEY_LOCK_ENABLE = yes # KC_LOCK
-
-LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift
diff --git a/keyboards/gh60/keymaps/chaser/README.md b/keyboards/gh60/keymaps/chaser/README.md
deleted file mode 100644
index e6ec9e82be..0000000000
--- a/keyboards/gh60/keymaps/chaser/README.md
+++ /dev/null
@@ -1,96 +0,0 @@
-# [dragonchasers](https://github.com/dragonchaser) GH60 layout
-
-Layout derived from the default GH60 keymap.
-
-![Photo of the keyboard](https://pbs.twimg.com/media/DQzlD0yX0AA8spX.jpg)
-
-## Layers
-
-### Base Layer
-```
-,-----------------------------------------------------------.
-|Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
-|-----------------------------------------------------------|
-|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |
-|-----------------------------------------------------------|
-|FN | A| S| D| F| G| H| J| K| L| ;| '|Return |
-|-----------------------------------------------------------|
-|Shift | Z| X| C| V| B| N| M| ,| .| /| Up |FN |
-|-----------------------------------------------------------|
-|Ctrl|Gui |Alt | Space |Alt |Left |Down|Right|
-`-----------------------------------------------------------'
-
-Note: right FN triggers function layer,
- left FN(CAPS) is a one-shot button for the macro layer
-```
-
-### Function Layer
-```
-,-----------------------------------------------------------.
-|GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL |
-|-----------------------------------------------------------|
-| MB3|MB2|MUP|MB1|MWU| | | |INS| |RST| | |Print|
-|-----------------------------------------------------------|
-| | ML|MDN|MR |MWD| | | | | | | |
-|-----------------------------------------------------------|
-|CAPS | | | | | | | | | | |PGUP| |
-|-----------------------------------------------------------|
-| | | | |Ctrl|HOME|PGD |END |
-`-----------------------------------------------------------'
-```
-
-### Macro Layer
-```
-,-----------------------------------------------------------.
-|DEF| |DUE| | | | | | | | | |GAM| ARR|
-|-----------------------------------------------------------|
-| |MAG|CLO|DUT|RBS|TIG| | | |COU|PSH| | | |
-|-----------------------------------------------------------|
-| |ADD|STS|DFF|FTC|PLL| | |LOG| | | |
-|-----------------------------------------------------------|
-| | | |COM| |BRN| | | | |MUT|VOL+|PLPA|
-|-----------------------------------------------------------|
-| | | | |APP |PREV|VOL-|NEXT|
-`-----------------------------------------------------------'
-
-Abbreviations:
---------------
-DEF - return to default layer
-DUE - enable git duet mode
-GAM - backlight WASD
-ARR - backlight arrows
--
-MAG - git submodule sync --recursive \
- && git submodule update --init --recursive \
- && git submodule foreach --recursive "git co . \
- && git reset --hard && git clean -dffx"
-CLO - git clone
-DUT - git duet (when in duet mode)
-RBS - git rebase
-TIG - tig
-COU - git checkout
-PSH - git push
--
-ADD - git add
-STS - git status
-DFF - git diff
-FTC - git fetch
-PLL - git pull
-LOG - git log
--
-COM - git commit (or git duet commit if in duet mode)
-BRN - git branch
-MUT - audio mute
-VOL+ - increase volume
-PLPA - play/pause
--
-APP - application (windows menu key)
-PREV - previous song
-VOL- - decrease volume
-NEXT - next song
-
-Note: git commands are SEND_STRING macros sent to the
- currently focused window Make sure it is your terminal :)
- ```
-
-**NOTE:** an outdated version of this keymap is also present for the Satan keyboard, which is no longer maintained since I could not get my hands on a properly working PCB.
diff --git a/keyboards/gh60/keymaps/chaser/keymap.c b/keyboards/gh60/keymaps/chaser/keymap.c
deleted file mode 100644
index 29228eec2d..0000000000
--- a/keyboards/gh60/keymaps/chaser/keymap.c
+++ /dev/null
@@ -1,328 +0,0 @@
-#include QMK_KEYBOARD_H
-#include <util/delay.h>
-
-
-extern keymap_config_t keymap_config;
-
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QW 0
-#define _FL 1
-#define _MC 2
-
-bool git_duet = false;
-bool backlight_arrows = false;
-bool backlight_gaming = false;
-enum custom_keycodes {
- /* GIT related keycodes */
- G_ADD = SAFE_RANGE, G_BRN, G_COM, G_COU, G_CLO,
- G_DFF, G_DUE, G_DUT, G_FTC, G_LOG, G_MAG, G_MRG,
- G_MRT, G_PSH, G_PLL, G_RBS, G_STH, G_STS, G_TIG,
-
- /* Multi-media related keycodes */
- A_MUTE, A_NEXT, A_PLPA, A_PREV, A_VOUP, A_VDWN,
-
- /* System related shortcuts */
- F_BTN, M_WAPP, K_ARR, K_WASD,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- /*
- * ,-----------------------------------------------------------.
- * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |
- * |-----------------------------------------------------------|
- * |FN | A| S| D| F| G| H| J| K| L| ;| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /| FN |Up |
- * |-----------------------------------------------------------|
- * |Ctrl|Gui |Alt | Space |Alt |Left |Down|Right|
- * `-----------------------------------------------------------'
- *
- * Note: right FN triggers function layer,
- * left FN is a one-shot button for the macro layer
- */
- /* Layer 0: Qwerty */
- [_QW] = LAYOUT_60_ansi_split_rshift( \
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
- OSL(_MC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, F_BTN, KC_UP, \
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT \
- ),
-
- /*
- * ,-----------------------------------------------------------.
- * |GRV|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL |
- * |-----------------------------------------------------------|
- * | MB3|MB2|MUP|MB1|MWU| | | |INS| |RST| | |Print|
- * |-----------------------------------------------------------|
- * | | ML|MDN|MR |MWD| | | | | | | |
- * |-----------------------------------------------------------|
- * |CAPS | | | | | | | | | | |PGUP| |
- * |-----------------------------------------------------------|
- * | | | | |Ctrl|HOME|PGD |END |
- * `-----------------------------------------------------------'
- */
- /* Layer 1: Functions */
- [_FL] = LAYOUT_60_ansi_split_rshift(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
- KC_BTN3, KC_BTN2, KC_MS_U, KC_BTN1, KC_WH_U, _______, _______, _______, KC_INS, _______, RESET, _______, _______, KC_PSCR, \
- KC_CAPS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, _______, _______, _______, _______, _______, KC_TILD, \
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, \
- _______, _______, _______, _______, KC_RCTL, KC_HOME, KC_PGDN, KC_END \
- ),
-
- /*
- * ,-----------------------------------------------------------.
- * |DEF| |DUE| | | | | | | | | |GAM| ARR|
- * |-----------------------------------------------------------|
- * | |MAG|CLO|DUT|RBS|TIG|MRT| | |COU|PSH| | | |
- * |-----------------------------------------------------------|
- * | |ADD|STS|DFF|FTC|PLL|MRG| |STH|LOG| | | F_OFF|
- * |-----------------------------------------------------------|
- * | | | |COM| |BRN| | | | |MUT|VOL+|PLPA|
- * |-----------------------------------------------------------|
- * | | | | |APP |PREV|VOL-|NEXT|
- * `-----------------------------------------------------------'
- *
- * Abbreviations:
- * --------------
- * DEF - return to default layer
- * DUE - enable git duet mode
- * CLO - git clone
- * DUT - git duet (when in duet mode)
- * RBS - git rebase
- * MAG - git submodule sync --recursive && git submodule update --init --recursive && git submodule foreach --recursive "git co . && git reset --hard && git clean -dffx"
- * TIG - tig
- * MRG - git merge
- * MRT - git mergetool
- * COU - git checkout
- * PSH - git push
- * ADD - git add
- * STS - git status
- * DFF - git diff
- * FTC - git fetch
- * PLL - git pull
- * STH - git stash
- * LOG - git log
- * COM - git commit (or git duet commit if in duet mode)
- * BRN - git branch
- * APP - application (windows menu key)
- * MUT - audio mute
- * VOL+ - increase volume
- * VOL- - decrease volume
- * PLPA - play/pause
- * PREV - previous song
- * NEXT - next song
- * ARR - backlight arrow keys
- * GAM - backlight WASD
- *
- * Note: git commands are SEND_STRING macros sent to the
- * currently focused window Make sure it is your terminal :)
- */
- /* Layer 2: Macros (Git & Multimedia) */
- [_MC] = LAYOUT_60_ansi_split_rshift( \
- TO(_QW), XXXXXXX, G_DUE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, K_WASD, K_ARR, \
- XXXXXXX, G_MAG, G_CLO, G_DUT, G_RBS, G_TIG, G_MRT, XXXXXXX, XXXXXXX, G_COU, G_PSH, XXXXXXX, XXXXXXX, XXXXXXX, \
- XXXXXXX, G_ADD, G_STS, G_DFF, G_FTC, G_PLL, G_MRG, XXXXXXX, G_STH, G_LOG, XXXXXXX, XXXXXXX, XXXXXXX, \
- XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, G_COM, XXXXXXX, G_BRN, XXXXXXX, XXXXXXX, XXXXXXX, A_MUTE, A_PLPA, A_VOUP, \
- XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, M_WAPP, A_PREV, A_VDWN, A_NEXT \
- ),
-
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- if (record->event.pressed) {
- switch(keycode) {
- /*
- * Begin git layer
- */
- case G_ADD:
- SEND_STRING("git add ");
- layer_off(_MC);
- return false;break;
- case G_BRN:
- SEND_STRING("git branch\n");
- layer_off(_MC);
- return false;break;
- case G_CLO:
- SEND_STRING("git clone ");
- layer_off(_MC);
- return false;break;
- case G_COM:
- if(git_duet) {
- SEND_STRING("git duet-commit ");
- } else {
- SEND_STRING("git commit ");
- }
- layer_off(_MC);
- return false;break;
- case G_COU:
- SEND_STRING("git checkout ");
- layer_off(_MC);
- return false;break;
- case G_DFF:
- SEND_STRING("git diff\n");
- layer_off(_MC);
- return false;break;
- case G_DUE:
- git_duet = !git_duet;
- if(git_duet) {
- gh60_esc_led_on();
- } else {
- gh60_esc_led_off();
- }
- layer_off(_MC);
- return false;break;
- case G_DUT:
- if(git_duet) {
- SEND_STRING("git duet ");
- }
- layer_off(_MC);
- return false; break;
- case G_FTC:
- SEND_STRING("git fetch ");
- layer_off(_MC);
- return false;break;
- case G_LOG:
- SEND_STRING("git log --graph\n");
- layer_off(_MC);
- return false;break;
- case G_MAG:
- // This is some git-magic to resync recursive submodule structures inside git projects (thx to https://github.com/jimmykarily)
- SEND_STRING("git submodule sync --recursive && git submodule update --init --recursive && git submodule foreach --recursive \" git co . && git reset --hard && git clean -dffx \" \n");
- layer_off(_MC);
- return false; break;
- case G_MRG:
- SEND_STRING("git merge ");
- layer_off(_MC);
- return false;break;
- case G_MRT:
- SEND_STRING("git mergetool ");
- layer_off(_MC);
- return false;break;
- case G_PLL:
- SEND_STRING("git pull ");
- layer_off(_MC);
- return false;break;
- case G_PSH:
- SEND_STRING("git push ");
- layer_off(_MC);
- return false;break;
- case G_RBS:
- SEND_STRING("git rebase ");
- layer_off(_MC);
- return false;break;
- case G_STH:
- SEND_STRING("git stash ");
- layer_off(_MC);
- return false;break;
- case G_STS:
- SEND_STRING("git status\n");
- layer_off(_MC);
- return false;break;
- case G_TIG:
- SEND_STRING("tig\n");
- layer_off(_MC);
- return false;break;
- /*
- * End git layer
- */
-
- /*
- * Begin multimedia keys
- */
- case A_MUTE:
- register_code(KC_AUDIO_MUTE);
- unregister_code(KC_AUDIO_MUTE);
- layer_off(_MC);
- return false;break;
- case A_PLPA:
- register_code(KC_MEDIA_PLAY_PAUSE);
- unregister_code(KC_MEDIA_PLAY_PAUSE);
- layer_off(_MC);
- return false;break;
- case A_VOUP:
- register_code(KC_AUDIO_VOL_UP);
- return false;break;
- case A_VDWN:
- register_code(KC_AUDIO_VOL_DOWN);
- return false;break;
- case A_PREV:
- register_code(KC_MEDIA_PREV_TRACK);
- unregister_code(KC_MEDIA_PREV_TRACK);
- layer_off(_MC);
- return false;break;
- case A_NEXT:
- register_code(KC_MEDIA_NEXT_TRACK);
- unregister_code(KC_MEDIA_NEXT_TRACK);
- layer_off(_MC);
- return false;break;
- /*
- * End multimedia keys
- */
-
- // Tap dance to get the app button mapped
- case M_WAPP:
- register_code(KC_APP);
- unregister_code(KC_APP);
- layer_off(_MC);
- return false;break;
-
- /*
- * Begin multimedia keys
- */
- case K_ARR:
- backlight_arrows = !backlight_arrows;
- if(backlight_arrows) {
- gh60_poker_leds_on();
- } else {
- gh60_poker_leds_off();
- }
- layer_off(_MC);
- return false;break;
- case K_WASD:
- backlight_gaming = !backlight_gaming;
- if(backlight_gaming) {
- gh60_wasd_leds_on();
- } else {
- gh60_wasd_leds_off();
- }
- layer_off(_MC);
- return false; break;
- case F_BTN:
- gh60_fn_led_on();
- layer_on(_FL);
- return false;break;
- }
- /*
- * End multimedia keys
- */
-
- } else {
- switch(keycode) {
- /*
- * Oneshots that will switch back to the default layer on KEY_UP
- */
- case A_VOUP:
- unregister_code(KC_AUDIO_VOL_UP);
- layer_off(_MC);
- return false;break;
- case A_VDWN:
- unregister_code(KC_AUDIO_VOL_DOWN);
- layer_off(_MC);
- return false;break;
- case F_BTN:
- layer_off(_FL);
- gh60_fn_led_off();
- return false;break;
- }
- }
- return true;
-};
diff --git a/keyboards/gh60/keymaps/dbroqua/config.h b/keyboards/gh60/keymaps/dbroqua/config.h
deleted file mode 100644
index 8952200e05..0000000000
--- a/keyboards/gh60/keymaps/dbroqua/config.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER geekhack
-#define PRODUCT GH60
-#define DESCRIPTION t.m.k. keyboard firmware for GH60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * RGB Underglow
- * These settings are for the F4 by default:
- *
- *
- * #define ws2812_pin PF4
- * #define RGBLED_NUM 14 // Number of LEDs
- * #define RGBLIGHT_HUE_STEP 10
- * #define RGBLIGHT_SAT_STEP 17
- * #define RGBLIGHT_VAL_STEP 17
- *
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
-*/
-
-#define RGB_DI_PIN F4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 11 // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
diff --git a/keyboards/gh60/keymaps/dbroqua/keymap.c b/keyboards/gh60/keymaps/dbroqua/keymap.c
deleted file mode 100644
index 2030355a76..0000000000
--- a/keyboards/gh60/keymaps/dbroqua/keymap.c
+++ /dev/null
@@ -1,196 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _DEFAULT 0
-#define _FN 1
-#define _WASD 2
-#define _SFX 3
-
-//bool esc_led_on;
-
-enum planck_keycodes {
- DEFAULT = SAFE_RANGE
-};
-
-// Fillers to make layering more clear
-#define ______ KC_TRNS
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Qwerty gui/alt/space/alt/gui
- * ,-----------------------------------------------------------------------------------------.
- * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
- * |-----------------------------------------------------------------------------------------+
- * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
- * |-----------------------------------------------------------------------------------------+
- * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
- * |-----------------------------------------------------------------------------------------+
- * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN |
- * |-----------------------------------------------------------------------------------------+
- * |LGUI | LAlt | Space | RAlt |RGUI |
- * `-----------------------------------------------------------------'
- */
- [_DEFAULT] = LAYOUT_60_ansi_split_bs_rshift( /* Basic QWERTY */
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \
- ______, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, ______, ______ \
- ),
-
-/* FN Layer
- * ,-----------------------------------------------------------------------------------------.
- * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
- * |-----------------------------------------------------------------------------------------+
- * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | |
- * |-----------------------------------------------------------------------------------------+
- * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| |
- * |-----------------------------------------------------------------------------------------+
- * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | |
- * |-----------------------------------------------------------------------------------------+
- * | | | | Stop | |
- * `-----------------------------------------------------------------'
- */
- [_FN] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 1 */
- TG(_SFX),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
- KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
- ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \
- ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \
- ______, ______, ______, TG(_WASD), KC_MSTP, ______, ______, ______ \
- ),
-
-/* WASD Layer
- * ,-----------------------------------------------------------------------------------------.
- * | | | | | | | | | | | | | | | |
- * |-----------------------------------------------------------------------------------------+
- * | | | Up | | | | | | | | | | | |
- * |-----------------------------------------------------------------------------------------+
- * | | Left| Down|Right| | | | | | | | | |
- * |-----------------------------------------------------------------------------------------+
- * | | | | | | | | | | | | | |
- * |-----------------------------------------------------------------------------------------+
- * | | | | | |
- * `-----------------------------------------------------------------'
- */
- [_WASD] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 2 */
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, ______, KC_UP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, KC_LEFT, KC_DOWN,KC_RGHT,______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______,______, \
- ______, ______, ______, ______, ______, ______, ______, ______ \
- ),
-
-/* SFX Layer
- * ,-----------------------------------------------------------------------------------------.
- * | | | | | | | | | | | | | | | |
- * |-----------------------------------------------------------------------------------------+
- * | | BL- | BL+ | BL | | | | | | | | | | |
- * |-----------------------------------------------------------------------------------------+
- * | | RGBT| RGBM| | | | | | | | | | |
- * |-----------------------------------------------------------------------------------------+
- * | | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | |
- * |-----------------------------------------------------------------------------------------+
- * | | | | | |
- * `-----------------------------------------------------------------'
- */
- [_SFX] = LAYOUT_60_ansi_split_bs_rshift(
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, F(0), F(1), ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
- ______, F(2), F(3), F(4), F(5), F(6), F(7), ______, ______, ______, ______, ______, ______, \
- ______, ______, ______, ______, ______, ______, ______, ______ \
- )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- return MACRO_NONE;
-};
-
-enum function_id {
- RGBLED_TOGGLE,
- RGBLED_STEP_MODE,
- RGBLED_INCREASE_HUE,
- RGBLED_DECREASE_HUE,
- RGBLED_INCREASE_SAT,
- RGBLED_DECREASE_SAT,
- RGBLED_INCREASE_VAL,
- RGBLED_DECREASE_VAL
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_FUNCTION(RGBLED_TOGGLE),
- [1] = ACTION_FUNCTION(RGBLED_STEP_MODE),
- [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
- [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
- [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
- [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
- [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
- [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL)
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch (id) {
- case RGBLED_TOGGLE:
- if (record->event.pressed) {
- rgblight_toggle();
- }
- break;
- case RGBLED_INCREASE_HUE:
- if (record->event.pressed) {
- rgblight_increase_hue();
- }
- break;
- case RGBLED_DECREASE_HUE:
- if (record->event.pressed) {
- rgblight_decrease_hue();
- }
- break;
- case RGBLED_INCREASE_SAT:
- if (record->event.pressed) {
- rgblight_increase_sat();
- }
- break;
- case RGBLED_DECREASE_SAT:
- if (record->event.pressed) {
- rgblight_decrease_sat();
- }
- break;
- case RGBLED_INCREASE_VAL:
- if (record->event.pressed) {
- rgblight_increase_val();
- }
- break;
- case RGBLED_DECREASE_VAL:
- if (record->event.pressed) {
- rgblight_decrease_val();
- }
- break;
- case RGBLED_STEP_MODE:
- if (record->event.pressed) {
- rgblight_step();
- }
- break;
- }
-}
-
-void matrix_scan_user(void) {
- uint32_t layer = layer_state;
-
- if (layer & (1<<1)) {
- gh60_fn_led_on();
- } else {
- gh60_fn_led_off();
- }
-
- if (layer & (1<<2)) {
- gh60_wasd_leds_on();
- } else {
- gh60_wasd_leds_off();
- }
-
- if (layer & (1<<3)) {
- gh60_esc_led_on();
- } else {
- gh60_esc_led_off();
- }
-}; \ No newline at end of file
diff --git a/keyboards/gh60/keymaps/dbroqua/rules.mk b/keyboards/gh60/keymaps/dbroqua/rules.mk
deleted file mode 100644
index 21d4b60d96..0000000000
--- a/keyboards/gh60/keymaps/dbroqua/rules.mk
+++ /dev/null
@@ -1,107 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-# CONSOLE_ENABLE = yes # Console for debug(+400)
-# COMMAND_ENABLE = yes # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-# MIDI_ENABLE = YES # MIDI controls
-# UNICODE_ENABLE = YES # Unicode
-# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes # Enable RGB Underglow
-
diff --git a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c
deleted file mode 100644
index 74ff97a931..0000000000
--- a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c
+++ /dev/null
@@ -1,87 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _DEFAULT 0
-#define _FN 1
-
-int esc_led = 0;
-
-// Fillers to make layering more clear
-#define ______ KC_TRNS
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Qwerty gui/alt/space/alt/gui
- * ,-----------------------------------------------------------------------------------------.
- * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
- * |-----------------------------------------------------------------------------------------+
- * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp |
- * |-----------------------------------------------------------------------------------------+
- * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
- * |-----------------------------------------------------------------------------------------+
- * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN |
- * |-----------------------------------------------------------------------------------------+
- * |LGUI | LAlt | Space | RAlt |RGUI |
- * `-----------------------------------------------------------------'
- */
- [_DEFAULT] = LAYOUT_60_ansi_split_bs_rshift( /* Basic QWERTY */
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \
- ______, KC_LGUI, KC_LALT, KC_SPC, ______, KC_RALT, KC_RGUI, ______ \
- ),
-
-/* FN Layer
- * ,-----------------------------------------------------------------------------------------.
- * | Led | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
- * |-----------------------------------------------------------------------------------------+
- * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | |
- * |-----------------------------------------------------------------------------------------+
- * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| |
- * |-----------------------------------------------------------------------------------------+
- * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | |
- * |-----------------------------------------------------------------------------------------+
- * | | | | Stop | |
- * `-----------------------------------------------------------------'
- */
- [_FN] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 1 */
- F(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
- KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \
- ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \
- ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \
- ______, ______, ______, ______, ______, KC_MSTP, ______, ______ \
- )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- return MACRO_NONE;
-};
-
-enum function_id {
- LED_TOGGLE
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_FUNCTION(LED_TOGGLE)
-};
-
-void esc_led_toggle(void) {
- if (esc_led == 0){
- esc_led = 1;
- gh60_esc_led_on();
- } else {
- esc_led = 0;
- gh60_esc_led_off();
- }
-}
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch (id) {
- case LED_TOGGLE:
- if (record->event.pressed) {
- esc_led_toggle();
- }
- break;
- }
-} \ No newline at end of file
diff --git a/keyboards/gh60/keymaps/dbroqua_7U/rules.mk b/keyboards/gh60/keymaps/dbroqua_7U/rules.mk
deleted file mode 100644
index 21192b1794..0000000000
--- a/keyboards/gh60/keymaps/dbroqua_7U/rules.mk
+++ /dev/null
@@ -1,107 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-# CONSOLE_ENABLE = yes # Console for debug(+400)
-# COMMAND_ENABLE = yes # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-# MIDI_ENABLE = YES # MIDI controls
-# UNICODE_ENABLE = YES # Unicode
-# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable RGB Underglow
-
diff --git a/keyboards/gh60/keymaps/default/keymap.c b/keyboards/gh60/keymaps/default/keymap.c
deleted file mode 100644
index a8fd4f3c22..0000000000
--- a/keyboards/gh60/keymaps/default/keymap.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- [0] = LAYOUT_all( /* 0: qwerty */
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT,
- KC_LSFT, TG(2), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL
- ),
-
- [1] = LAYOUT_all( /* 1: fn */
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
- _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______
- ),
-
- [2] = LAYOUT_all( /* 2: arrows */
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______,
- _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT
- ),
-
-};
-
-void matrix_scan_user(void) {
-
-//Layer LED indicators
- uint32_t layer = layer_state;
-
- if (layer & (1<<1)) {
- gh60_wasd_leds_on();
- gh60_fn_led_on();
- } else {
- gh60_wasd_leds_off();
- gh60_fn_led_off();
- }
-
- if (layer & (1<<2)) {
- gh60_poker_leds_on();
- gh60_esc_led_on();
- } else {
- gh60_poker_leds_off();
- gh60_esc_led_off();
- }
-
-};
diff --git a/keyboards/gh60/keymaps/emiilsd/keymap.c b/keyboards/gh60/keymaps/emiilsd/keymap.c
deleted file mode 100644
index a863511d60..0000000000
--- a/keyboards/gh60/keymaps/emiilsd/keymap.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* Copyright 2018 Funderburker
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /*
- ISO HHKB layout:
-
- * 2u Backspace
- * ISO Enter
- * split left Shift
- * split right Shift
- * Caps as Control
- * 1u/1.5u/7u/1.5u//1u bottom row
- */
-
- /* 0: QWERTY */
- [0] = LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NO,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
- KC_LSFT, KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), KC_RSFT,
- KC_NO, KC_LALT, KC_LGUI, KC_SPC, KC_NO, KC_NO, KC_RALT, KC_CAPSLOCK, KC_NO
- ),
-
- /* 1: Fn layer */
- [1] = LAYOUT(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
- _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, KC_UP, _______, _______,
- _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, KC_PGUP, KC_LEFT, KC_RGHT, _______, _______,
- _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_DOWN, _______, _______,
- _______, _______, _______, _______, _______, _______, _______, _______, _______
- ),
-
-};
diff --git a/keyboards/gh60/keymaps/maartenwut/keymap.c b/keyboards/gh60/keymaps/maartenwut/keymap.c
deleted file mode 100755
index d5e101e7f6..0000000000
--- a/keyboards/gh60/keymaps/maartenwut/keymap.c
+++ /dev/null
@@ -1,47 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _MA 0
-#define _GA 1
-#define _FL 2
-#define _AR 3
-
-#define TRNS KC_TRNS
-#define trigger_time 400
-
-#define LSHIFT OSM(MOD_LSFT)
-#define SPACE LT(_AR, KC_SPC)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-// Main Layer
-[_MA] = LAYOUT_60_ansi_split_bs_rshift(
- KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
- LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL,
- KC_LCTL, KC_LGUI, KC_LALT, SPACE, KC_NO, KC_RALT, MO(_FL), KC_RCTRL),
-
-//Function Layer
-[_FL] = LAYOUT_60_ansi_split_bs_rshift(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, KC_NO,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_PSCR,
- TRNS, KC_MS_L, KC_MS_D, KC_MS_R, TRNS, TG(_GA), TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_VOLD, KC_VOLU, KC_MUTE, TRNS, KC_MPLY,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
-
-//Arrow keys layer (space bar)
-[_AR] = LAYOUT_60_ansi_split_bs_rshift(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TRNS, KC_NO,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_PGUP, KC_UP, KC_PGDN, TRNS, TRNS, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_LEFT, KC_DOWN, KC_RGHT, TRNS, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
-
-//Game layer (fn + g)
-[_GA] = LAYOUT_60_ansi_split_bs_rshift(
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, KC_NO,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
- KC_LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
- TRNS, TRNS, TRNS, KC_SPC, TRNS, TRNS, MO(_FL), TRNS),
-
-};
diff --git a/keyboards/gh60/keymaps/maxr1998/config.h b/keyboards/gh60/keymaps/maxr1998/config.h
deleted file mode 100644
index 8c3b9b2502..0000000000
--- a/keyboards/gh60/keymaps/maxr1998/config.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-Copyright 2017 Max Rumpf alias Maxr1998 <max.rumpf1998@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define RGB_DI_PIN F4 // pin the DI on the WS2812B is hooked-up to
-#define RGBLIGHT_ANIMATIONS // run RGB animations
-#define RGBLED_NUM 6 // number of LEDs
-#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
-#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
-#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
-
-#endif \ No newline at end of file
diff --git a/keyboards/gh60/keymaps/maxr1998/keymap.c b/keyboards/gh60/keymaps/maxr1998/keymap.c
deleted file mode 100644
index eff94ff657..0000000000
--- a/keyboards/gh60/keymaps/maxr1998/keymap.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-Copyright 2017 Max Rumpf alias Maxr1998 <max.rumpf1998@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
-
-#define KC_EURO RALT(KC_5)
-
-#define SWITCH_LANG SEND_STRING(SS_LGUI(SS_TAP(X_SPACE)))
-#define PRINT_UMLAUT(str) SWITCH_LANG;_delay_ms(90);SEND_STRING(str);SWITCH_LANG;
-
-enum custom_keycodes {
- MCO_AE = SAFE_RANGE,
- MCO_OE = SAFE_RANGE + 1,
- MCO_UE = SAFE_RANGE + 2,
- MCO_SS = SAFE_RANGE + 3,
- TP_REQ = SAFE_RANGE + 10,
- TP_ACC = SAFE_RANGE + 11
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: qwertz */
- LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NO, \
- KC_LOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_HOME, KC_ENT, \
- KC_LSFT, KC_BSLS, KC_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT,\
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, F(0), KC_LEFT, KC_DOWN, KC_RGHT),
- /* 1: fn */
- LAYOUT(
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_EURO, TP_REQ, TP_ACC, KC_TRNS, MCO_UE, KC_TRNS, MCO_OE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
- KC_TRNS, MCO_AE, MCO_SS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_SW,KC_TRNS, KC_GRV, KC_TRNS,\
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS,\
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(1) // to Fn overlay
-};
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- if (record->event.pressed) {
- switch (keycode) {
- case MCO_AE:
- PRINT_UMLAUT("'"); // ä
- return false;
- case MCO_OE:
- PRINT_UMLAUT(";"); // ö
- return false;
- case MCO_UE:
- PRINT_UMLAUT("["); // ü
- return false;
- case MCO_SS:
- PRINT_UMLAUT("-"); // ß
- return false;
- case TP_REQ:
- SEND_STRING("/tpa ");
- return false;
- case TP_ACC:
- SEND_STRING("/tpaccept"SS_TAP(X_ENTER));
- return false;
- }
- }
- return true;
-} \ No newline at end of file
diff --git a/keyboards/gh60/keymaps/maxr1998/rules.mk b/keyboards/gh60/keymaps/maxr1998/rules.mk
deleted file mode 100644
index d64f11e1f0..0000000000
--- a/keyboards/gh60/keymaps/maxr1998/rules.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-# Build Options
-# comment out to disable the options.
-#
-RGBLIGHT_ENABLE = yes # Enable RGB Underglow
-KEY_LOCK_ENABLE = yes # Enable key lock option
-SKIP_GIT = yes
diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h
deleted file mode 100644
index 1cc41d183b..0000000000
--- a/keyboards/gh60/keymaps/robotmaxtron/config.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER geekhack
-#define PRODUCT GH60
-#define DESCRIPTION t.m.k. keyboard firmware for GH60
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
- #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
-// Rev A
-// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
-// Rev B/C
- #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * RGB Underglow
- * These settings are for the F4 by default:
- *
- *
- * #define ws2812_pin PF4
- * #define RGBLED_NUM 14 // Number of LEDs
- * #define RGBLIGHT_HUE_STEP 10
- * #define RGBLIGHT_SAT_STEP 17
- * #define RGBLIGHT_VAL_STEP 17
- *
- * The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
- * To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
- * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
-*/
-
-#define RGB_DI_PIN F4
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8 // Number of LEDs
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
diff --git a/keyboards/gh60/keymaps/robotmaxtron/keymap.c b/keyboards/gh60/keymaps/robotmaxtron/keymap.c
deleted file mode 100644
index 649cbec389..0000000000
--- a/keyboards/gh60/keymaps/robotmaxtron/keymap.c
+++ /dev/null
@@ -1,225 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define _BL 0
-#define _AL 1
-#define _FL 2
-#define _UL 3
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /*
- * Base layer, pretty standard ANSI layout.
- * ,-----------------------------------------------------------.
- * |F(12)| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |-----------------------------------------------------------|
- * |Caps/Fn| A| S| D| F| G| H| J| K| L| ;| '|Return |
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl|
- * `-----------------------------------------------------------'
- */
- [_BL] = LAYOUT(
- F(12),KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \
- KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \
- F(2),KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \
- KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_NO,KC_RALT,F(0),KC_APP,KC_RCTL),
-
- /*
- * Locking arrow keys to WASD for when you need dedicated arrow keys
- * ,-----------------------------------------------------------.
- * | | | | | | | | | | | | | | |
- * |-----------------------------------------------------------|
- * | | |Up | | | | | | | | | | | |
- * |-----------------------------------------------------------|
- * | |Left|Down|Rght| | | | | | | | | |
- * |-----------------------------------------------------------|
- * | | | | | | | | | | | | |
- * |-----------------------------------------------------------|
- * | | | | | | | | |
- * `-----------------------------------------------------------'
- */
- [_AL] = LAYOUT(
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-
-
- /*
- * Primary function layer, mostly the same as the traditional Pok3r layout.
- * ,-------------------------------------------------------------.
- * |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
- * |-------------------------------------------------------------|
- * | |_AL| | | | |Calc|PgUp|Up|PgDn|Ptscn|Srlck|Pause| |
- * |-------------------------------------------------------------|
- * | | | | | | |Home|Left|Down|Rght|Ins| | |
- * |-------------------------------------------------------------|
- * | |_UL| | | | | | | | | | |
- * |-------------------------------------------------------------|
- * | | | | | | | | |
- * `-------------------------------------------------------------'
- */
- [_FL] = LAYOUT(
- KC_GRAVE,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
- KC_TRNS,F(1),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_CALC,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS, \
- KC_TRNS,KC_MUTE,KC__VOLDOWN,KC__VOLUP,KC_TRNS,KC_TRNS,KC_HOME,KC_LEFT,KC_DOWN,KC_RGHT,KC_INS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,F(3),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_END,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-
- /*
- * Locking layer for controlling the underglow.
- *
- * ,-----------------------------------------------------------.
- * | | | | | | | | | | | | | | |
- * |-----------------------------------------------------------|
- * | | | | | | | | | | | | | | |
- * |-----------------------------------------------------------|
- * | |On|Mode| | | | | | | | | | |
- * |-----------------------------------------------------------|
- * | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | |
- * |-----------------------------------------------------------|
- * | | | | | | | | |
- * `-----------------------------------------------------------'
- */
- [_UL] = LAYOUT(
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-};
-
-enum function_id {
- RGBLED_TOGGLE,
- RGBLED_STEP_MODE,
- RGBLED_INCREASE_HUE,
- RGBLED_DECREASE_HUE,
- RGBLED_INCREASE_SAT,
- RGBLED_DECREASE_SAT,
- RGBLED_INCREASE_VAL,
- RGBLED_DECREASE_VAL,
- SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay
- [1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay
- [2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
- [3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay
- [4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
- [5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
- [6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
- [7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
- [8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
- [9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
- [10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
- [11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
- [12] = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
- return MACRO_NONE;
-};
-
-void matrix_scan_user(void) {
-
-// Layer LED indicators
-// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
- uint32_t layer = layer_state;
- if (layer & (1<<1)) {
- gh60_wasd_leds_on();
- } else {
- gh60_wasd_leds_off();
- }
-
- if (layer & (1<<2)) {
- gh60_esc_led_on();
- } else {
- gh60_esc_led_off();
- }
-};
-
-#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch (id) {
- case RGBLED_TOGGLE:
- //led operations
- if (record->event.pressed) {
- rgblight_toggle();
- }
- break;
- case RGBLED_INCREASE_HUE:
- if (record->event.pressed) {
- rgblight_increase_hue();
- }
- break;
- case RGBLED_DECREASE_HUE:
- if (record->event.pressed) {
- rgblight_decrease_hue();
- }
- break;
- case RGBLED_INCREASE_SAT:
- if (record->event.pressed) {
- rgblight_increase_sat();
- }
- break;
- case RGBLED_DECREASE_SAT:
- if (record->event.pressed) {
- rgblight_decrease_sat();
- }
- break;
- case RGBLED_INCREASE_VAL:
- if (record->event.pressed) {
- rgblight_increase_val();
- }
- break;
- case RGBLED_DECREASE_VAL:
- if (record->event.pressed) {
- rgblight_decrease_val();
- }
- break;
- case RGBLED_STEP_MODE:
- if (record->event.pressed) {
- rgblight_step();
- }
- break;
- static uint8_t shift_esc_shift_mask;
- // Shift + ESC = ~
- case SHIFT_ESC:
- shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
- if (record->event.pressed) {
- if (shift_esc_shift_mask) {
- add_key(KC_GRV);
- send_keyboard_report();
- } else {
- add_key(KC_ESC);
- send_keyboard_report();
- }
- } else {
- if (shift_esc_shift_mask) {
- del_key(KC_GRV);
- send_keyboard_report();
- } else {
- del_key(KC_ESC);
- send_keyboard_report();
- }
- }
- break;
- }
-};
diff --git a/keyboards/gh60/keymaps/robotmaxtron/readme.md b/keyboards/gh60/keymaps/robotmaxtron/readme.md
deleted file mode 100644
index 8db7b3f65b..0000000000
--- a/keyboards/gh60/keymaps/robotmaxtron/readme.md
+++ /dev/null
@@ -1,16 +0,0 @@
-robotmaxtron's GH60 Layout
-=====================
-
-##Quantum MK Firmware
-For the full Quantum feature list, see the parent readme.md.
-
-* Standard ANSI layout with Pok3r styled function layers
-* ESC key led enables when on function layer
-* Lockable layer with arrow keys on WASD with backlighting to indicate locked on arrow layer
-* Neopixel/WS2812 RGB Underglow Support
-
-## Reference Images
-![Wiring Refererence](https://i.imgur.com/BkJ39JD.jpg)
-
-### Additional Credits
-Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.
diff --git a/keyboards/gh60/keymaps/robotmaxtron/rules.mk b/keyboards/gh60/keymaps/robotmaxtron/rules.mk
deleted file mode 100644
index b6761ac9ff..0000000000
--- a/keyboards/gh60/keymaps/robotmaxtron/rules.mk
+++ /dev/null
@@ -1,107 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-# CONSOLE_ENABLE = yes # Console for debug(+400)
-# COMMAND_ENABLE = yes # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-# MIDI_ENABLE = YES # MIDI controls
-# UNICODE_ENABLE = YES # Unicode
-# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes # Enable RGB Underglow
-
diff --git a/keyboards/gh60/keymaps/sethbc/keymap.c b/keyboards/gh60/keymaps/sethbc/keymap.c
deleted file mode 100644
index 6c2c00ec27..0000000000
--- a/keyboards/gh60/keymaps/sethbc/keymap.c
+++ /dev/null
@@ -1,75 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: qwerty */
- LAYOUT_60_ansi_split_bs_rshift(
- F(0),KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,\
- KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSPC,\
- KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT,\
- KC_LSFT,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,F(1),\
- KC_LCTL,KC_LALT,KC_LGUI, KC_SPC, KC_RGUI,KC_RALT,KC_APP,KC_RCTL),
- /* 1: fn */
- LAYOUT_60_ansi_split_bs_rshift(
- KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_TRNS,KC_TRNS,\
- KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,\
- KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_PENT,\
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END,KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS,\
- KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
-};
-
-enum function_id {
- SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_FUNCTION(SHIFT_ESC),
- [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
- return MACRO_NONE;
-};
-
-void matrix_scan_user(void) {
-
-}
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- static uint8_t shift_esc_shift_mask;
- switch (id) {
- case SHIFT_ESC:
- shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
- if (record->event.pressed) {
- if (shift_esc_shift_mask) {
- add_key(KC_GRV);
- send_keyboard_report();
- } else {
- add_key(KC_ESC);
- send_keyboard_report();
- }
- } else {
- if (shift_esc_shift_mask) {
- del_key(KC_GRV);
- send_keyboard_report();
- } else {
- del_key(KC_ESC);
- send_keyboard_report();
- }
- }
- break;
- }
-}
diff --git a/keyboards/gh60/keymaps/sethbc/rules.mk b/keyboards/gh60/keymaps/sethbc/rules.mk
deleted file mode 100644
index e69de29bb2..0000000000
--- a/keyboards/gh60/keymaps/sethbc/rules.mk
+++ /dev/null
diff --git a/keyboards/gh60/keymaps/xyverz/keymap.c b/keyboards/gh60/keymaps/xyverz/keymap.c
deleted file mode 100644
index e47fcc2f94..0000000000
--- a/keyboards/gh60/keymaps/xyverz/keymap.c
+++ /dev/null
@@ -1,142 +0,0 @@
-#include QMK_KEYBOARD_H
-
-
-extern keymap_config_t keymap_config;
-
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QW 0
-#define _DV 1
-#define _CM 2
-#define _FL 3
-
-// Macro name shortcuts
-#define QWERTY M(_QW)
-#define DVORAK M(_DV)
-#define COLEMAK M(_CM)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
- /*
- * _QW: Qwerty Layer
- * ,-----------------------------------------------------------.
- * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |-----------------------------------------------------------|
- * |Fn | A| S| D| F| G| H| J| K| L| ;| '| Return|
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift|
- * |-----------------------------------------------------------|
- * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn|
- * `-----------------------------------------------------------'
- */
- /* Layer 0: Qwerty */
- [_QW] = LAYOUT_60_ansi(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
- MO(_FL), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT ,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)
- ),
-
- /*
- * _DV: Dvorak Layer
- * ,-----------------------------------------------------------.
- * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| [| ]| Backsp|
- * |-----------------------------------------------------------|
- * |Tab | '| ,| .| P| Y| F| G| C| R| L| /| =| \|
- * |-----------------------------------------------------------|
- * |Fn | A| O| E| U| I| D| H| T| N| S| -| Return|
- * |-----------------------------------------------------------|
- * |Shift | ;| Q| J| K| X| B| M| W| V| Z| Shift|
- * |-----------------------------------------------------------|
- * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn|
- * `-----------------------------------------------------------'
- */
- /* Layer 1: Dvorak */
- [_DV] = LAYOUT_60_ansi(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC,
- KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS,
- MO(_FL), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT,
- KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,
- KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)
- ),
-
- /*
- * _CM: Colemak Layer
- * ,-----------------------------------------------------------.
- * |ESC | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| Backsp|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| F| P| G| J| L| U| Y| ;| [| ]| \|
- * |-----------------------------------------------------------|
- * |Fn | A| R| S| T| D| H| N| E| I| O| '| Return|
- * |-----------------------------------------------------------|
- * |Shift | Z| X| C| V| B| K| M| ,| .| /| Shift|
- * |-----------------------------------------------------------|
- * |Ctrl|Alt |Gui | Space |Gui |Alt |Ctrl| Fn|
- * `-----------------------------------------------------------'
- */
- /* Layer 2: Colemak */
- [_CM] = LAYOUT_60_ansi(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
- KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS,
- MO(_FL), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
- KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, MO(_FL)
- ),
-
- /*
- * _FL: Function Layer
- * ,-----------------------------------------------------------.
- * | |F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Del|
- * |-----------------------------------------------------------|
- * | | | | | | | |PgU| Up|PgD|PSc|SLk|Pau| |
- * |-----------------------------------------------------------|
- * | | |MPr|MPl|MNx| |Hom| Lt| Dn| Rt| | | |
- * |-----------------------------------------------------------|
- * |CAPS | |Mut|VlD|VlU| |End| | | | | |
- * |-----------------------------------------------------------|
- * |_QW |_DV |_CM | | | | | |
- * `-----------------------------------------------------------'
- */
- /* Layer 3: Functions */
- [_FL] = LAYOUT_60_ansi(
- _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,
- _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, _______,
- _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______,
- KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_END, _______, _______, _______, _______, _______,
- QWERTY, DVORAK, COLEMAK, _______, _______, _______, _______, _______
- ),
-
-};
-
-void persistent_default_layer_set(uint16_t default_layer) {
- eeconfig_update_default_layer(default_layer);
- default_layer_set(default_layer);
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- switch(id) {
- case _DV:
- if (record->event.pressed) {
- persistent_default_layer_set(1UL<<_DV);
- }
- break;
- case _QW:
- if (record->event.pressed) {
- persistent_default_layer_set(1UL<<_QW);
- }
- break;
- case _CM:
- if (record->event.pressed) {
- persistent_default_layer_set(1UL<<_CM);
- }
- break;
- }
- return MACRO_NONE;
-};