20 files changed, 0 insertions, 420 deletions
diff --git a/keyboards/fjlabs/7vhotswap/config.h b/keyboards/fjlabs/7vhotswap/config.h
index 08ba8385b9..20d3467485 100644
--- a/keyboards/fjlabs/7vhotswap/config.h
+++ b/keyboards/fjlabs/7vhotswap/config.h
@@ -70,27 +70,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/ad65/config.h b/keyboards/fjlabs/ad65/config.h
index 6c760bb03a..b90da9153e 100644
--- a/keyboards/fjlabs/ad65/config.h
+++ b/keyboards/fjlabs/ad65/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/bks65/config.h b/keyboards/fjlabs/bks65/config.h
index 36f98ec9bc..3245338581 100644
--- a/keyboards/fjlabs/bks65/config.h
+++ b/keyboards/fjlabs/bks65/config.h
@@ -72,27 +72,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/bks65solder/config.h b/keyboards/fjlabs/bks65solder/config.h
index 6c6b430926..4e6f38f102 100644
--- a/keyboards/fjlabs/bks65solder/config.h
+++ b/keyboards/fjlabs/bks65solder/config.h
@@ -69,27 +69,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/bolsa65/config.h b/keyboards/fjlabs/bolsa65/config.h
index 89b48fabd5..a58b19db82 100644
--- a/keyboards/fjlabs/bolsa65/config.h
+++ b/keyboards/fjlabs/bolsa65/config.h
@@ -69,27 +69,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/kf87/config.h b/keyboards/fjlabs/kf87/config.h
index 0f6df9f329..f31f67a5f6 100644
--- a/keyboards/fjlabs/kf87/config.h
+++ b/keyboards/fjlabs/kf87/config.h
@@ -74,27 +74,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/kyuu/config.h b/keyboards/fjlabs/kyuu/config.h
index 8adc2eca0f..a892ff863e 100644
--- a/keyboards/fjlabs/kyuu/config.h
+++ b/keyboards/fjlabs/kyuu/config.h
@@ -72,27 +72,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/ldk65/config.h b/keyboards/fjlabs/ldk65/config.h
index d23a769c54..699edc0238 100644
--- a/keyboards/fjlabs/ldk65/config.h
+++ b/keyboards/fjlabs/ldk65/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/midway60/config.h b/keyboards/fjlabs/midway60/config.h
index 79e402f35e..9cda2af064 100644
--- a/keyboards/fjlabs/midway60/config.h
+++ b/keyboards/fjlabs/midway60/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/mk61rgbansi/config.h b/keyboards/fjlabs/mk61rgbansi/config.h
index d1f01e00c7..2e9cb7396e 100644
--- a/keyboards/fjlabs/mk61rgbansi/config.h
+++ b/keyboards/fjlabs/mk61rgbansi/config.h
@@ -73,27 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/peaker/config.h b/keyboards/fjlabs/peaker/config.h
index 89318d377c..96b67f4bb1 100644
--- a/keyboards/fjlabs/peaker/config.h
+++ b/keyboards/fjlabs/peaker/config.h
@@ -54,27 +54,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/polaris/config.h b/keyboards/fjlabs/polaris/config.h
index 84a82f15ae..5fb4995471 100644
--- a/keyboards/fjlabs/polaris/config.h
+++ b/keyboards/fjlabs/polaris/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/ready100/config.h b/keyboards/fjlabs/ready100/config.h
index 9aef0dc6c2..e187754f26 100644
--- a/keyboards/fjlabs/ready100/config.h
+++ b/keyboards/fjlabs/ready100/config.h
@@ -71,27 +71,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/sinanju/config.h b/keyboards/fjlabs/sinanju/config.h
index 20b68dbc64..822039fe1b 100644
--- a/keyboards/fjlabs/sinanju/config.h
+++ b/keyboards/fjlabs/sinanju/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/sinanjuwk/config.h b/keyboards/fjlabs/sinanjuwk/config.h
index 20b68dbc64..822039fe1b 100644
--- a/keyboards/fjlabs/sinanjuwk/config.h
+++ b/keyboards/fjlabs/sinanjuwk/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/solanis/config.h b/keyboards/fjlabs/solanis/config.h
index 9f112765c7..76a9d62474 100644
--- a/keyboards/fjlabs/solanis/config.h
+++ b/keyboards/fjlabs/solanis/config.h
@@ -70,27 +70,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/swordfish/config.h b/keyboards/fjlabs/swordfish/config.h
index 9dac6a21d5..d81a4350be 100644
--- a/keyboards/fjlabs/swordfish/config.h
+++ b/keyboards/fjlabs/swordfish/config.h
@@ -70,27 +70,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/tf60ansi/config.h b/keyboards/fjlabs/tf60ansi/config.h
index d1f01e00c7..2e9cb7396e 100644
--- a/keyboards/fjlabs/tf60ansi/config.h
+++ b/keyboards/fjlabs/tf60ansi/config.h
@@ -73,27 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/tf60v2/config.h b/keyboards/fjlabs/tf60v2/config.h
index d1f01e00c7..2e9cb7396e 100644
--- a/keyboards/fjlabs/tf60v2/config.h
+++ b/keyboards/fjlabs/tf60v2/config.h
@@ -73,27 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/fjlabs/tf65rgbv2/config.h b/keyboards/fjlabs/tf65rgbv2/config.h
index 83ae1be3b9..f67d5e6037 100644
--- a/keyboards/fjlabs/tf65rgbv2/config.h
+++ b/keyboards/fjlabs/tf65rgbv2/config.h
@@ -73,27 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */