diff options
Diffstat (limited to 'keyboards/ferris/0_1')
| -rw-r--r-- | keyboards/ferris/0_1/matrix.c | 77 | ||||
| -rw-r--r-- | keyboards/ferris/0_1/readme.md | 17 |
2 files changed, 41 insertions, 53 deletions
diff --git a/keyboards/ferris/0_1/matrix.c b/keyboards/ferris/0_1/matrix.c index e13c35d358..0dfb150b6c 100644 --- a/keyboards/ferris/0_1/matrix.c +++ b/keyboards/ferris/0_1/matrix.c @@ -72,40 +72,25 @@ uint8_t init_mcp23017(void) { // - unused : input : 1 // - input : input : 1 // - driving : output : 0 - mcp23017_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); - if (mcp23017_status) goto out; - mcp23017_status = i2c_write(IODIRA, I2C_TIMEOUT); - if (mcp23017_status) goto out; // This means: we will read all the bits on GPIOA - mcp23017_status = i2c_write(0b11111111, I2C_TIMEOUT); - if (mcp23017_status) goto out; // This means: we will write to the pins 0-4 on GPIOB (in select_rows) - mcp23017_status = i2c_write(0b11110000, I2C_TIMEOUT); - if (mcp23017_status) goto out; - i2c_stop(); - - // set pull-up - // - unused : on : 1 - // - input : on : 1 - // - driving : off : 0 - mcp23017_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); - if (mcp23017_status) goto out; - mcp23017_status = i2c_write(GPPUA, I2C_TIMEOUT); - if (mcp23017_status) goto out; - // This means: we will read all the bits on GPIOA - mcp23017_status = i2c_write(0b11111111, I2C_TIMEOUT); - if (mcp23017_status) goto out; - // This means: we will write to the pins 0-4 on GPIOB (in select_rows) - mcp23017_status = i2c_write(0b11110000, I2C_TIMEOUT); - if (mcp23017_status) goto out; - -out: - i2c_stop(); + uint8_t buf[] = {IODIRA, 0b11111111, 0b11110000}; + mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT); + if (!mcp23017_status) { + // set pull-up + // - unused : on : 1 + // - input : on : 1 + // - driving : off : 0 + // This means: we will read all the bits on GPIOA + // This means: we will write to the pins 0-4 on GPIOB (in select_rows) + uint8_t pullup_buf[] = {GPPUA, 0b11111111, 0b11110000}; + mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, pullup_buf, sizeof(pullup_buf), I2C_TIMEOUT); + } return mcp23017_status; } /* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; // debounced values +static matrix_row_t matrix[MATRIX_ROWS]; // debounced values static matrix_row_t read_cols(uint8_t row); static void init_cols(void); @@ -124,7 +109,7 @@ void matrix_init_custom(void) { // initialize matrix state: all keys off for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; + matrix[i] = 0; } } @@ -217,25 +202,18 @@ static matrix_row_t read_cols(uint8_t row) { if (mcp23017_status) { // if there was an error return 0; } else { - uint8_t data = 0; - mcp23017_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); - if (mcp23017_status) goto out; - mcp23017_status = i2c_write(GPIOA, I2C_TIMEOUT); - if (mcp23017_status) goto out; - mcp23017_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT); - if (mcp23017_status) goto out; - mcp23017_status = i2c_read_nack(I2C_TIMEOUT); - if (mcp23017_status < 0) goto out; + uint8_t buf[] = {GPIOA}; + mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT); // We read all the pins on GPIOA. // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero. // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys. // Since the pins connected to eact columns are sequential, and counting from zero up (col 5 -> GPIOA0, col 6 -> GPIOA1 and so on), the only transformation needed is a bitwise not to swap all zeroes and ones. - data = ~((uint8_t)mcp23017_status); - mcp23017_status = I2C_STATUS_SUCCESS; - out: - i2c_stop(); - // return reverse_bits(data, MATRIX_COLS_PER_SIDE); - return data; + uint8_t data[] = {0}; + if (!mcp23017_status) { + mcp23017_status = i2c_receive(I2C_ADDR_READ, data, sizeof(data), I2C_TIMEOUT); + data[0] = ~(data[0]); + } + return data[0]; } } } @@ -266,17 +244,10 @@ static void select_row(uint8_t row) { if (mcp23017_status) { // if there was an error // do nothing } else { - mcp23017_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); - if (mcp23017_status) goto out; - mcp23017_status = i2c_write(GPIOB, I2C_TIMEOUT); - if (mcp23017_status) goto out; // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one. // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus. - mcp23017_status = i2c_write(0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE)), I2C_TIMEOUT); - - if (mcp23017_status) goto out; - out: - i2c_stop(); + uint8_t buf[] = {GPIOB, 0xFF & ~(1 << (row - MATRIX_ROWS_PER_SIDE))}; + mcp23017_status = i2c_transmit(I2C_ADDR_WRITE, buf, sizeof(buf), I2C_TIMEOUT); } } } diff --git a/keyboards/ferris/0_1/readme.md b/keyboards/ferris/0_1/readme.md new file mode 100644 index 0000000000..336ee3863e --- /dev/null +++ b/keyboards/ferris/0_1/readme.md @@ -0,0 +1,17 @@ +# Ferris 0.1 + + + + +An atmega32u4 based split 34 keys column staggered keyboard named and decorated after the rustlang mascott. All PCB files and some thoughts on the design are available on the [project's github page](https://github.com/pierrechevalier83/ferris) + +* Keyboard Maintainer: [Pierre Chevalier](https://github.com/pierrechevalier83) +* Hardware Supported: + * Ferris 0.1: atmega32u4 chip. Comes in 4 variants: base, low, high and compact +* Hardware Availability: Pierre Chevalier has been selling keyboard kits (see the #ferris channel in the 40% discord chat). Wider availability is on the horizon. + +Make examples for this keyboard (after setting up your build environment): + + make ferris/0_1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |