summaryrefslogtreecommitdiff
path: root/keyboards/evyd13/wasdat_code/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/evyd13/wasdat_code/config.h')
-rw-r--r--keyboards/evyd13/wasdat_code/config.h69
1 files changed, 0 insertions, 69 deletions
diff --git a/keyboards/evyd13/wasdat_code/config.h b/keyboards/evyd13/wasdat_code/config.h
index 5449532862..085965b814 100644
--- a/keyboards/evyd13/wasdat_code/config.h
+++ b/keyboards/evyd13/wasdat_code/config.h
@@ -17,7 +17,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
-#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 8
@@ -39,75 +38,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SN74X138_ADDRESS_PINS { D2, D1, D0 }
#define SN74X138_E3_PIN D4
-// For QMK DFU
-#define QMK_ESC_OUTPUT E6
-#define QMK_ESC_INPUT F0
-#define QMK_LED B1
-
-#define LED_NUM_LOCK_PIN B3
-#define LED_CAPS_LOCK_PIN B1
-#define LED_SCROLL_LOCK_PIN B2
-#define LED_PIN_ON_STATE 0
-
-#define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 5
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
@@ -124,8 +59,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 2
-#define BOOTMAGIC_LITE_COLUMN 3
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 3