2 files changed, 2 insertions, 167 deletions
diff --git a/keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h b/keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h
index 2e83f799c7..bca8571e79 100644
--- a/keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h
+++ b/keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h
@@ -15,65 +15,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef INFINITY_ERGODOX_CONFIG_H
-#define INFINITY_ERGODOX_CONFIG_H
+#pragma once
 
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6464
-#define DEVICE_VER      0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/*   at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER "QMK"
-#define PRODUCT "Infinity keyboard/QMK"
-
-#define MOUSEKEY_INTERVAL       20
-#define MOUSEKEY_DELAY          0
-#define MOUSEKEY_TIME_TO_MAX    60
-#define MOUSEKEY_MAX_SPEED      7
-#define MOUSEKEY_WHEEL_DELAY 0
-
-#define TAPPING_TOGGLE  1
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-#define TAPPING_TERM    200
-#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
-    get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
-)
-
-/* key matrix size */
-#define MATRIX_ROWS 18
-#define MATRIX_COLS 5
-#define LOCAL_MATRIX_ROWS 9
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-#define LED_BRIGHTNESS_LO       100
-#define LED_BRIGHTNESS_HI       255
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
-#define SERIAL_LINK_BAUD 562500
-#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
-
-#define VISUALIZER_USER_DATA_SIZE 16
 /*
  * music mode options
  * midi enabled
@@ -82,22 +25,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #define MUSIC_MASK keycode != KC_NO
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk b/keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk
index 43a3185295..04cd01b2b7 100644
--- a/keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk
+++ b/keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk
@@ -1,93 +1,4 @@
-# project specific files
-SRC =	matrix.c \
-	led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
-#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
-MCU_LDSCRIPT = MK20DX256BLDR8
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity 60%
-#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-#   - MCHCK_K20 for Infinity KB
-#BOARD = MCHCK_K20
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
-
-BOOTLOADER = dfu
-
-# Build Options
-#   comment out to disable the options.
-#
-
-BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
-CONSOLE_ENABLE   = no  # Console for debug(+400)
-COMMAND_ENABLE   = yes # Commands for debug and configuration
-CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
-SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-UNICODE_ENABLE   = yes # Unicode
-SWAP_HANDS_ENABLE = yes # Allow swapping hands of keyboard
-STENO_ENABLE = yes  #enable plover steno mode
-CUSTOM_MATRIX = yes # Custom matrix file
-SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE = yes
-LCD_ENABLE = yes
-BACKLIGHT_ENABLE = yes
-LCD_BACKLIGHT_ENABLE = yes
+STENO_ENABLE = yes
 MIDI_ENABLE = yes
 MIDI_ADVANCED = yes
 MUSIC_MODE = yes
-RGBLIGHT_ENABLE = no
-
-LCD_DRIVER = st7565
-LCD_WIDTH = 128
-LCD_HEIGHT = 32
-
-LED_DRIVER = is31fl3731c
-LED_WIDTH = 7
-LED_HEIGHT = 7
-
-LAYOUTS = ergodox