summaryrefslogtreecommitdiff
path: root/keyboards/dm9records/lain/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/dm9records/lain/readme.md')
-rw-r--r--keyboards/dm9records/lain/readme.md32
1 files changed, 32 insertions, 0 deletions
diff --git a/keyboards/dm9records/lain/readme.md b/keyboards/dm9records/lain/readme.md
new file mode 100644
index 0000000000..6eb216af61
--- /dev/null
+++ b/keyboards/dm9records/lain/readme.md
@@ -0,0 +1,32 @@
+# lain
+
+![lain](https://i.imgur.com/V0mR1Bgh.jpg)
+
+Ergonomic 40% keyboard.
+
+serial exprement lain themed.
+licensed under #lainttl (https://www.nbcuni.co.jp/rondorobe/anime/lain/ttl/)
+
+* Keyboard Maintainer: [Takuya Urakawa @hsgw](https://github.com/hsgw), https://5z6p.com
+* Hardware Supported: onboard MCU.
+* Hardware Availability: Group buy. (https://5z6p.com/products/lain/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make dm9records/lain:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Note
+### PCB revision
+
+If your pcb is not Rev.1, you should use the firmware in below repository.
+https://github.com/hsgw/qmk_firmware/tree/lain/keyboards/dm9records/lain
+
+### Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available