diff options
Diffstat (limited to 'keyboards/bastardkb/charybdis/3x6/v2/stemcell')
5 files changed, 163 insertions, 0 deletions
diff --git a/keyboards/bastardkb/charybdis/3x6/v2/stemcell/config.h b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/config.h new file mode 100644 index 0000000000..81c7e737a7 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/config.h @@ -0,0 +1,63 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* Key matrix configuration. */ +#define MATRIX_ROW_PINS \ + { F7, C6, D4, B5 } +#define MATRIX_COL_PINS \ + { F6, F5, B6, D7, E6, B4 } + +/* Handedness. */ +#define MASTER_RIGHT + +// To use the handedness pin, resistors need to be installed on the adapter PCB. +// If so, uncomment the following code, and undefine MASTER_RIGHT above. +// #define A0 PAL_LINE(GPIOA, 0) +// #define SPLIT_HAND_PIN A0 +// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left. + +/* serial.c configuration (for split keyboard). */ +#define SOFT_SERIAL_PIN D2 + +/* RGB settings. */ +#define RGB_DI_PIN D3 +#define WS2812_PWM_DRIVER PWMD2 +#define WS2812_PWM_CHANNEL 4 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 +#define WS2812_DMA_CHANNEL 3 + +/* CRC. */ +#define CRC8_USE_TABLE +#define CRC8_OPTIMIZE_SPEED + +/* SPI config for pmw3360 sensor. */ +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN B1 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN B2 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN B3 +#define SPI_MISO_PAL_MODE 5 + +/* PMW3360 settings. */ +#define A1 PAL_LINE(GPIOA, 1) +#define POINTING_DEVICE_CS_PIN A1 +#define PMW3360_CS_MODE 3 +#define PMW3360_CS_DIVISOR 64 diff --git a/keyboards/bastardkb/charybdis/3x6/v2/stemcell/halconf.h b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/halconf.h new file mode 100644 index 0000000000..8141e0cf4b --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/halconf.h @@ -0,0 +1,24 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE +#define HAL_USE_SPI TRUE + +#include_next <halconf.h> diff --git a/keyboards/bastardkb/charybdis/3x6/v2/stemcell/info.json b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/info.json new file mode 100644 index 0000000000..516eb7dde3 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/info.json @@ -0,0 +1,6 @@ +{ + "keyboard_name": "Charybdis Mini (3x6) STeMCell", + "usb": { + "device_version": "2.0.0" + } +} diff --git a/keyboards/bastardkb/charybdis/3x6/v2/stemcell/mcuconf.h b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/mcuconf.h new file mode 100644 index 0000000000..1a3c4433db --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/mcuconf.h @@ -0,0 +1,32 @@ +/* + * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE + +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 FALSE + +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE + +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 5 diff --git a/keyboards/bastardkb/charybdis/3x6/v2/stemcell/rules.mk b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/rules.mk new file mode 100644 index 0000000000..94cd8a0deb --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x6/v2/stemcell/rules.mk @@ -0,0 +1,38 @@ +# MCU name +MCU = STM32F411 + +# Bootloader selection +BOOTLOADER = stm32-dfu +CONVERT_TO = stemcell + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +AUDIO_SUPPORTED = no # Audio is not supported +RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default +RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default +RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality +RGB_MATRIX_DRIVER = WS2812 + +SPLIT_KEYBOARD = yes +LAYOUTS = split_3x6_3 + +POINTING_DEVICE_ENABLE = yes # Enable trackball +POINTING_DEVICE_DRIVER = pmw3360 +MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint +KEYBOARD_SHARED_EP = yes + +SERIAL_DRIVER = usart +WS2812_DRIVER = pwm + +DEBOUNCE_TYPE = asym_eager_defer_pk |