diff options
Diffstat (limited to 'keyboard/retro_refit')
| -rw-r--r-- | keyboard/retro_refit/Makefile | 140 | ||||
| -rw-r--r-- | keyboard/retro_refit/README.md | 24 | ||||
| -rw-r--r-- | keyboard/retro_refit/config.h | 123 | ||||
| -rw-r--r-- | keyboard/retro_refit/keymaps/default.c | 33 | ||||
| -rw-r--r-- | keyboard/retro_refit/retro_refit.c | 68 | ||||
| -rw-r--r-- | keyboard/retro_refit/retro_refit.h | 45 |
6 files changed, 0 insertions, 433 deletions
diff --git a/keyboard/retro_refit/Makefile b/keyboard/retro_refit/Makefile deleted file mode 100644 index 918b430719..0000000000 --- a/keyboard/retro_refit/Makefile +++ /dev/null @@ -1,140 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = retro_refit - - -# Directory common source filess exist -TOP_DIR = ../.. -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# # project specific files -SRC = retro_refit.c - -ifdef KEYMAP - SRC := keymaps/$(KEYMAP).c $(SRC) -else - SRC := keymaps/default.c $(SRC) -endif - -CONFIG_H = config.h - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -# Optimize size but this may cause error "relocation truncated to fit" -#EXTRALDFLAGS = -Wl,--relax - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TOP_DIR) -VPATH += $(TMK_DIR) - -include $(TOP_DIR)/quantum/quantum.mk - diff --git a/keyboard/retro_refit/README.md b/keyboard/retro_refit/README.md deleted file mode 100644 index d3c9d4197d..0000000000 --- a/keyboard/retro_refit/README.md +++ /dev/null @@ -1,24 +0,0 @@ -retro_refit keyboard firmware -====================== - -## Quantum MK Firmware - -For the full Quantum feature list, see [the parent README.md](/README.md). - -## Building - -Download or clone the whole firmware and navigate to the keyboard/retro_refit folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. - -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default -To build with the default keymap, simply run `make`. - -### Other Keymaps -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` and see keymap document (you can find in top README.md) and existent keymap files. - -To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: -``` -$ make KEYMAP=[default|jack|<name>] -``` -Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
\ No newline at end of file diff --git a/keyboard/retro_refit/config.h b/keyboard/retro_refit/config.h deleted file mode 100644 index f2194e550c..0000000000 --- a/keyboard/retro_refit/config.h +++ /dev/null @@ -1,123 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Nobody -#define PRODUCT retro_refit -#define DESCRIPTION Retro Refit - -/* key matrix size */ -#define MATRIX_ROWS 11 -#define MATRIX_COLS 8 - -// See note in retro_refit.h for an explanation of how this matrix is wired up -#define MATRIX_ROW_PINS { D4, D7, B4, B5, B6, F7, F6, F5, F4, F1, F0 } -#define MATRIX_COL_PINS { B0, B1, B2, B3, D2, D3, C7, D5 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 0 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - - -/* Force NKRO Mode - If forced on, must be disabled via magic key (default = LShift+RShift+N) */ -#define FORCE_NKRO - -/* - * Magic key options - * These options allow the magic key functionality to be changed. This is useful - * if your keyboard/keypad is missing keys and you want magic key support. - */ - -/* key combination for magic key command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* remap magic keys */ -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -#define MAGIC_KEY_LOCK BSLS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboard/retro_refit/keymaps/default.c b/keyboard/retro_refit/keymaps/default.c deleted file mode 100644 index 405402d5e3..0000000000 --- a/keyboard/retro_refit/keymaps/default.c +++ /dev/null @@ -1,33 +0,0 @@ -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, -// this is the style you want to emulate. - -#include "retro_refit.h" - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = - KEYMAP( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, NLCK, SLCK, PSCR, PAUS, \ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, HOME, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, PGUP, \ - BSLS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, PGDN, \ - LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, END, \ - LCTL, LGUI, LALT, SPC, INS, DEL, LEFT, DOWN, RGHT), -}; - -const uint16_t PROGMEM fn_actions[] = { - -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } - return MACRO_NONE; -}; diff --git a/keyboard/retro_refit/retro_refit.c b/keyboard/retro_refit/retro_refit.c deleted file mode 100644 index 78b6edca75..0000000000 --- a/keyboard/retro_refit/retro_refit.c +++ /dev/null @@ -1,68 +0,0 @@ -#include "retro_refit.h" - -__attribute__ ((weak)) -void matrix_init_user(void) { - // leave this function blank - it can be defined in a keymap file -}; - -__attribute__ ((weak)) -void matrix_scan_user(void) { - // leave this function blank - it can be defined in a keymap file -}; - -__attribute__ ((weak)) -void led_set_user(uint8_t usb_led) { - // leave this function blank - it can be defined in a keymap file -}; - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - // Disable status LED on KB, enable status LED on Teensy (KB_STATUS = !TEENSY_STATUS) - DDRD |= (1<<6); - PORTD |= (1<<6); - - matrix_init_user(); -}; - -void amatrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -}; - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output low - DDRD |= (1<<0); - PORTD &= ~(1<<0); - } else { - // Hi-Z - DDRD &= ~(1<<0); - PORTD &= ~(1<<0); - } - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // output low - DDRD |= (1<<1); - PORTD &= ~(1<<1); - } else { - // Hi-Z - DDRD &= ~(1<<1); - PORTD &= ~(1<<1); - } - if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { - // output low - DDRC |= (1<<6); - PORTC &= ~(1<<6); - } else { - // Hi-Z - DDRC &= ~(1<<6); - PORTC &= ~(1<<6); - } - - led_set_user(usb_led); -};
\ No newline at end of file diff --git a/keyboard/retro_refit/retro_refit.h b/keyboard/retro_refit/retro_refit.h deleted file mode 100644 index 6e57586374..0000000000 --- a/keyboard/retro_refit/retro_refit.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef RETRO_REFIT_H -#define RETRO_REFIT_H - -#include "matrix.h" -#include "keymap_common.h" -#include "led.h" -#include <stddef.h> - -// This macro is an example of using a non-standard row-column matrix. The -// keyboard in question had 11 rows and 8 columns, but the rows were not all -// horizontal, and the columns were not all vertical. For example, row 2 -// contained "Print Screen", "N", "M", ",", ".", "/", "Right Shift", and -// "Left Alt". Column 0 contained "F6", "7", "O", "'", "Q", "D", "B", -// "Left Alt", "Up Arrow", and "Down Arrow". -// -// The macro makes programming the keys easier and in a more straight-forward -// manner because it realigns the keys into a 6x15 sensible keyboard layout -// instead of the obtuse 11x8 matrix. - -#define KEYMAP( \ - K77, K05, K04, K03, K02, K01, K00, KA7, KA6, KA5, KA4, KA3, KA2, K11, K94, \ - K27, K76, K75, K74, K73, K72, K71, K70, K67, K66, K65, K64, K63, K62, KA1, \ - K61, K60, K57, K56, K55, K54, K53, K52, K51, K50, K47, K46, K45, K97, \ - K43, K42, K41, K40, K37, K36, K35, K34, K33, K32, K31, K30, K44, K87, \ - K26, K24, K23, K22, K21, K20, K17, K16, K15, K14, K13, K12, KA0, K91, \ - K10, K06, K25, K07, K86, K85, K95, K90, K93 \ -) { \ -{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, }, \ -{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, }, \ -{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, }, \ -{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, }, \ -{ KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, }, \ -{ KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, }, \ -{ KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, }, \ -{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, }, \ -{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K85, KC_##K86, KC_##K87, }, \ -{ KC_##K90, KC_##K91, KC_NO, KC_##K93, KC_##K94, KC_##K95, KC_NO, KC_##K97, }, \ -{ KC_##KA0, KC_##KA1, KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7, } \ -} - -void matrix_init_user(void); -void matrix_scan_user(void); -void led_set_user(uint8_t usb_led); - -#endif
\ No newline at end of file |