summaryrefslogtreecommitdiff
path: root/keyboard/jd45
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/jd45')
-rw-r--r--keyboard/jd45/Makefile140
-rw-r--r--keyboard/jd45/backlight.c61
-rw-r--r--keyboard/jd45/config.h80
-rw-r--r--keyboard/jd45/jd45.c27
-rw-r--r--keyboard/jd45/jd45.h12
-rw-r--r--keyboard/jd45/keymaps/default.c31
-rw-r--r--keyboard/jd45/keymaps/justin.c101
7 files changed, 0 insertions, 452 deletions
diff --git a/keyboard/jd45/Makefile b/keyboard/jd45/Makefile
deleted file mode 100644
index d270a6f8a7..0000000000
--- a/keyboard/jd45/Makefile
+++ /dev/null
@@ -1,140 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = jd45
-
-
-# Directory common source filess exist
-TOP_DIR = ../..
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# # project specific files
-SRC = jd45.c \
- backlight.c
-
-ifdef KEYMAP
- SRC := keymaps/keymaps/(KEYMAP).c $(SRC)
-else
- SRC := keymaps/default.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-# NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-MIDI_ENABLE = YES # MIDI controls
-# UNICODE_ENABLE = YES # Unicode
-BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-# Optimize size but this may cause error "relocation truncated to fit"
-#EXTRALDFLAGS = -Wl,--relax
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TOP_DIR)/quantum/quantum.mk
-
diff --git a/keyboard/jd45/backlight.c b/keyboard/jd45/backlight.c
deleted file mode 100644
index f69364b2af..0000000000
--- a/keyboard/jd45/backlight.c
+++ /dev/null
@@ -1,61 +0,0 @@
-
-#include <avr/io.h>
-#include "backlight.h"
-
-#define CHANNEL OCR1C
-
-void backlight_init_ports()
-{
-
- // Setup PB7 as output and output low.
- DDRB |= (1<<7);
- PORTB &= ~(1<<7);
-
- // Use full 16-bit resolution.
- ICR1 = 0xFFFF;
-
- // I could write a wall of text here to explain... but TL;DW
- // Go read the ATmega32u4 datasheet.
- // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
-
- // Pin PB7 = OCR1C (Timer 1, Channel C)
- // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
- // (i.e. start high, go low when counter matches.)
- // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
- // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
-
- TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
- TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
-
- backlight_init();
-}
-
-void backlight_set(uint8_t level)
-{
- if ( level == 0 )
- {
- // Turn off PWM control on PB7, revert to output low.
- TCCR1A &= ~(_BV(COM1C1));
- CHANNEL = 0x0;
- // Prevent backlight blink on lowest level
- PORTB &= ~(_BV(PORTB7));
- }
- else if ( level == BACKLIGHT_LEVELS )
- {
- // Prevent backlight blink on lowest level
- PORTB &= ~(_BV(PORTB7));
- // Turn on PWM control of PB7
- TCCR1A |= _BV(COM1C1);
- // Set the brightness
- CHANNEL = 0xFFFF;
- }
- else
- {
- // Prevent backlight blink on lowest level
- PORTB &= ~(_BV(PORTB7));
- // Turn on PWM control of PB7
- TCCR1A |= _BV(COM1C1);
- // Set the brightness
- CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
- }
-} \ No newline at end of file
diff --git a/keyboard/jd45/config.h b/keyboard/jd45/config.h
deleted file mode 100644
index ffedb6a1a9..0000000000
--- a/keyboard/jd45/config.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER geekhack
-#define PRODUCT JD45
-#define DESCRIPTION q.m.k. keyboard firmware for JD45
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
-
-/* Planck PCB default pin-out */
-#define MATRIX_ROW_PINS { F0, F1, F5, B4 }
-#define MATRIX_COL_PINS { F4, D7, B5, B6, C6, C7, D4, D6, D5, D0, D1, D2, B0 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-#define NO_DEBUG
-
-/* disable print */
-#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboard/jd45/jd45.c b/keyboard/jd45/jd45.c
deleted file mode 100644
index bc3fcd3ddf..0000000000
--- a/keyboard/jd45/jd45.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#include "jd45.h"
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-
-};
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-
-};
-
-void matrix_init_kb(void) {
- #ifdef BACKLIGHT_ENABLE
- backlight_init_ports();
- #endif
-
- if (matrix_init_user) {
- (*matrix_init_user)();
- }
-};
-
-void matrix_scan_kb(void) {
- if (matrix_scan_user) {
- (*matrix_scan_user)();
- }
-};
diff --git a/keyboard/jd45/jd45.h b/keyboard/jd45/jd45.h
deleted file mode 100644
index d0ca1a88d0..0000000000
--- a/keyboard/jd45/jd45.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef JD45_H
-#define JD45_H
-
-#include "matrix.h"
-#include "keymap_common.h"
-#include "backlight.h"
-#include <stddef.h>
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
-
-#endif
diff --git a/keyboard/jd45/keymaps/default.c b/keyboard/jd45/keymaps/default.c
deleted file mode 100644
index 05dd46e792..0000000000
--- a/keyboard/jd45/keymaps/default.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include "jd45.h"
-#include "backlight.h"
-
-/* this keymap is to provide a basic keyboard layout for testing the matrix
- * for more practical and complicated keymap refer to other keymaps in the same folder
- */
-/* JD45 keymap definition macro
- */
-#define KEYMAP( \
- K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \
- K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \
- K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \
- K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \
-) { \
- { KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K10, KC_##K11, KC_##K12, KC_##K13 }, \
- { KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_NO }, \
- { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_NO }, \
- { KC_##K38, KC_##K39, KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_##K43, KC_NO, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_NO } \
-}
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP(
- ESC, Q, W, E, R, T, Y, U, I, O, P, QUOT, BSPC,
- TAB, A, S, D, F, G, H, J, K, L, SCLN, ENT,
- LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,
- PAUSE, LCTL, LALT, DEL, SPC, DEL, LEFT, UP, DOWN, RIGHT ),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
diff --git a/keyboard/jd45/keymaps/justin.c b/keyboard/jd45/keymaps/justin.c
deleted file mode 100644
index f261b54633..0000000000
--- a/keyboard/jd45/keymaps/justin.c
+++ /dev/null
@@ -1,101 +0,0 @@
-#include "jd45.h"
-#include "backlight.h"
-
-/* JD45 keymap definition macro
- */
-#define KEYMAP( \
- K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \
- K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \
- K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \
- K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \
-) { \
- { KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K10, KC_##K11, KC_##K12, KC_##K13 }, \
- { KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_NO }, \
- { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_NO }, \
- { KC_##K38, KC_##K39, KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_##K43, KC_NO, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_NO } \
-}
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP(
- ESC, Q, W, F, P, G, J, L, U, Y, SCLN, QUOT, BSPC,
- FN8, A, R, S, T, D, H, N, E, I, O, ENT,
- LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, FN6,
- FN4, LGUI, FN7, FN2, FN1, SPC, FN5, RALT, FN3, FN0 ),
-[1] = KEYMAP(
- TRNS, FN10, FN11, FN12, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, DEL,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGUP, LEFT, RGHT,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, END, PGDN, DOWN, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ),
-[2] = KEYMAP(
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, 7, 8, 9, 0, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC, 4, 5, 6, DOT, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RBRC, 1, 2, 3, BSLS, TRNS,
- TRNS,FN29, TRNS, TRNS, TRNS, PAUSE, EQL, MINS, TRNS, TRNS ),
-[3] = KEYMAP(
- TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS ),
-[4] = KEYMAP(
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, 7, 8, 9, 0, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LBRC, 4, 5, 6, DOT, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RBRC, 1, 2, 3, BSLS, TRNS,
- TRNS,FN29, TRNS, TRNS, TRNS, PAUSE, EQL, MINS, TRNS, TRNS ),
-};
-
-enum macro_id {
- PSWD1,
- PSWD2,
- PSWD3,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_MINS),
- [1] = ACTION_LAYER_MOMENTARY(1), // FN1
- [2] = ACTION_LAYER_MOMENTARY(2), // FN2
- [3] = ACTION_LAYER_MOMENTARY(3), // FN3
- [4] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_GRV),
- [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_RGUI),
- [6] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_CAPS),
- [7] = ACTION_LAYER_MODS(4, MOD_LSFT), // FN4
- [8] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_TAB),
-
- [10] = ACTION_MACRO(PSWD1),
- [11] = ACTION_MACRO(PSWD2),
- [12] = ACTION_MACRO(PSWD3),
-
- [29] = ACTION_BACKLIGHT_TOGGLE(),
- [30] = ACTION_BACKLIGHT_INCREASE(),
- [31] = ACTION_BACKLIGHT_DECREASE()
-
-};
-
-/*
- * Macro definition
- */
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- switch (id) {
- case PSWD1:
- return (record->event.pressed ?
- MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
- MACRO_NONE );
- case PSWD2:
- return (record->event.pressed ?
- MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
- MACRO_NONE );
- case PSWD3:
- return (record->event.pressed ?
- MACRO( I(0), T(1), T(2), T(3), T(4), T(5), T(6), T(7), T(8), T(ENT), END ) :
- MACRO_NONE );
- //case VOLUP:
- // return (record->event.pressed ?
- // MACRO( D(VOLU), U(VOLU), END ) :
- // MACRO_NONE );
- //case ALT_TAB:
- // return (record->event.pressed ?
- // MACRO( D(LALT), D(TAB), END ) :
- // MACRO( U(TAB), END ));
- }
- return MACRO_NONE;
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 12:11:26 +0000