diff options
Diffstat (limited to 'keyboard/hid_liber')
-rw-r--r-- | keyboard/hid_liber/Makefile.lufa | 138 | ||||
-rw-r--r-- | keyboard/hid_liber/Makefile.pjrc | 111 | ||||
-rw-r--r-- | keyboard/hid_liber/README.md | 17 | ||||
-rw-r--r-- | keyboard/hid_liber/config.h | 49 | ||||
-rw-r--r-- | keyboard/hid_liber/keymap.c | 125 | ||||
-rw-r--r-- | keyboard/hid_liber/keymap_alaricljs.h | 61 | ||||
-rw-r--r-- | keyboard/hid_liber/keymap_ansi.h | 32 | ||||
-rw-r--r-- | keyboard/hid_liber/keymap_custom.h | 64 | ||||
-rw-r--r-- | keyboard/hid_liber/keymap_iso.h | 32 | ||||
-rw-r--r-- | keyboard/hid_liber/led.c | 34 | ||||
-rw-r--r-- | keyboard/hid_liber/matrix.c | 231 |
11 files changed, 0 insertions, 894 deletions
diff --git a/keyboard/hid_liber/Makefile.lufa b/keyboard/hid_liber/Makefile.lufa deleted file mode 100644 index 5fc4156a9e..0000000000 --- a/keyboard/hid_liber/Makefile.lufa +++ /dev/null @@ -1,138 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = hid_liber_lufa - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - - -# List C source files here. (C dependencies are automatically generated.) -SRC += keymap.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in bytes -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - -include $(TMK_DIR)/protocol/lufa.mk -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/rules.mk - -ansi: OPT_DEFS += -DLAYOUT_ANSI -ansi: all - -iso: OPT_DEFS += -DLAYOUT_ISO -iso: all - -custom: OPT_DEFS += -DLAYOUT_CUSTOM -custom: all - -alaricljs: OPT_DEFS += -DLAYOUT_ALARICLJS -alaricljs: all diff --git a/keyboard/hid_liber/Makefile.pjrc b/keyboard/hid_liber/Makefile.pjrc deleted file mode 100644 index 326bbe86f5..0000000000 --- a/keyboard/hid_liber/Makefile.pjrc +++ /dev/null @@ -1,111 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = hid_liber_pjrc - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -SRC = keymap.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# Boot Section Size in bytes -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - -include $(TMK_DIR)/protocol/pjrc.mk -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/rules.mk - -ansi: OPT_DEFS += -DLAYOUT_ANSI -ansi: all - -iso: OPT_DEFS += -DLAYOUT_ISO -iso: all - -custom: OPT_DEFS += -DLAYOUT_CUSTOM -custom: all - -alaricljs: OPT_DEFS += -DLAYOUT_ALARICLJS -alaricljs: all diff --git a/keyboard/hid_liber/README.md b/keyboard/hid_liber/README.md deleted file mode 100644 index a5534ce711..0000000000 --- a/keyboard/hid_liber/README.md +++ /dev/null @@ -1,17 +0,0 @@ -hid_liberation firmware -====================== -DIY daughterboard for Filco Majestouch TKL developed by Geekhack and Deskthority communities. -The PCB was engineered by bpiphany. - -## Wiki on Deskthority.net -- [Instructions](http://deskthority.net/wiki/HID_Liberation_Device_-_Instructions) -- [Assembly Instructions](http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions) - - -Build ------ -Move to this directory then just run `make` like: - - $ make -f Makefile.[pjrc|lufa] [ansi|iso|custom|alaricljs] - -Use `Makefile.pjrc` if you want to use PJRC stack or use `Makefile.lufa` for LUFA stack. diff --git a/keyboard/hid_liber/config.h b/keyboard/hid_liber/config.h deleted file mode 100644 index 968ccf5500..0000000000 --- a/keyboard/hid_liber/config.h +++ /dev/null @@ -1,49 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0xB919 -#define DEVICE_VER 0x0001 -#define MANUFACTURER t.m.k. -#define PRODUCT HID Liberation - - -/* message strings */ -#define DESCRIPTION t.m.k. keyboard firmware for HID Liberation - - -/* matrix size */ -#define MATRIX_ROWS 18 -#define MATRIX_COLS 8 - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* Set 0 if need no debouncing */ -#define DEBOUNCE 8 - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -#endif diff --git a/keyboard/hid_liber/keymap.c b/keyboard/hid_liber/keymap.c deleted file mode 100644 index 433a620975..0000000000 --- a/keyboard/hid_liber/keymap.c +++ /dev/null @@ -1,125 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * Keymap for HID Liberator controller - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/pgmspace.h> -#include "keycode.h" -#include "action.h" -#include "action_macro.h" -#include "report.h" -#include "host.h" -#include "print.h" -#include "debug.h" -#include "keymap.h" - - -// Convert physical keyboard layout to matrix array. -// This is a macro to define keymap easily in keyboard layout form. -#define KEYMAP( \ - KG1, KH7, KJ7, KJ6, KJ1, KO5, KL1, KA6, KA7, KD7, KD5, KD1, KD2, KB5, KB3, KO3, \ - KG7, KG5, KH5, KJ5, KI5, KI7, KK7, KK5, KL5, KA5, KC5, KC7, KL7, KD6, KQ7, KN7, KM7, \ - KG6, KG3, KH3, KJ3, KI3, KI6, KK6, KK3, KL3, KA3, KC3, KC6, KL6, KD4, KP7, KN5, KM5, \ - KH6, KG4, KH4, KJ4, KI4, KI1, KK1, KK4, KL4, KA4, KC4, KC1, KD0, \ - KF6, KH1, KG0, KH0, KJ0, KI0, KI2, KK2, KK0, KL0, KA0, KC2, KF4, KN1, \ - KO7, KE6, KB1, KP1, KB2, KR4, KA2, KO0, KN2, KP2, KQ2 \ -) { \ -/* 0 1 2 3 4 5 6 7 */ \ -/* A */ { KC_##KA0, KC_NO , KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7 }, \ -/* B */ { KC_NO , KC_##KB1, KC_##KB2, KC_##KB3, KC_NO , KC_##KB5, KC_NO , KC_NO }, \ -/* C */ { KC_NO , KC_##KC1, KC_##KC2, KC_##KC3, KC_##KC4, KC_##KC5, KC_##KC6, KC_##KC7 }, \ -/* D */ { KC_##KD0, KC_##KD1, KC_##KD2, KC_NO , KC_##KD4, KC_##KD5, KC_##KD6, KC_##KD7 }, \ -/* E */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_##KE6, KC_NO }, \ -/* F */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_##KF4, KC_NO , KC_##KF6, KC_NO }, \ -/* G */ { KC_##KG0, KC_##KG1, KC_NO , KC_##KG3, KC_##KG4, KC_##KG5, KC_##KG6, KC_##KG7 }, \ -/* H */ { KC_##KH0, KC_##KH1, KC_NO , KC_##KH3, KC_##KH4, KC_##KH5, KC_##KH6, KC_##KH7 }, \ -/* I */ { KC_##KI0, KC_##KI1, KC_##KI2, KC_##KI3, KC_##KI4, KC_##KI5, KC_##KI6, KC_##KI7 }, \ -/* J */ { KC_##KJ0, KC_##KJ1, KC_NO , KC_##KJ3, KC_##KJ4, KC_##KJ5, KC_##KJ6, KC_##KJ7 }, \ -/* K */ { KC_##KK0, KC_##KK1, KC_##KK2, KC_##KK3, KC_##KK4, KC_##KK5, KC_##KK6, KC_##KK7 }, \ -/* L */ { KC_##KL0, KC_##KL1, KC_NO , KC_##KL3, KC_##KL4, KC_##KL5, KC_##KL6, KC_##KL7 }, \ -/* M */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_##KM5, KC_NO , KC_##KM7 }, \ -/* N */ { KC_NO , KC_##KN1, KC_##KN2, KC_NO , KC_NO , KC_##KN5, KC_NO , KC_##KN7 }, \ -/* O */ { KC_##KO0, KC_NO , KC_NO , KC_##KO3, KC_NO , KC_##KO5, KC_NO , KC_##KO7 }, \ -/* P */ { KC_NO , KC_##KP1, KC_##KP2, KC_NO , KC_NO , KC_NO , KC_NO , KC_##KP7 }, \ -/* Q */ { KC_NO , KC_NO , KC_##KQ2, KC_NO , KC_NO , KC_NO , KC_NO , KC_##KQ7 }, \ -/* R */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_##KR4, KC_NO , KC_NO , KC_NO } \ -} - -/* - * Tenkeyless keyboard default layout, ISO & ANSI (ISO is between Left Shift - * and Z, and the ANSI \ key above Return/Enter is used for the additional ISO - * switch in the ASD row next to enter. Use NUBS as keycode for the first and - * NUHS as the keycode for the second. - * - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. - * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU| - * |-----------------------------------------------------------| |-----------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| - * |-----------------------------------------------------------| `-----------' - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| ,---. - * |Shft|ISO| Z| X| C| V| B| N| M| ,| .| /|Shift | |Up | - * |-----------------------------------------------------------| ,-----------. - * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| - * `-----------------------------------------------------------' `-----------' - */ - -/* - * Add different layouts. If no layout is defined the default layout will be set to ANSI. -*/ -#if defined(LAYOUT_CUSTOM) - #include "keymap_custom.h" -#elif defined(LAYOUT_ALARICLJS) - #include "keymap_alaricljs.h" -#elif defined(LAYOUT_ISO) - #include "keymap_iso.h" -#elif defined(LAYOUT_ANSI) - #include "keymap_ansi.h" -#else - #include "keymap_ansi.h" -#endif - -#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0])) -#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0])) - -/* translates key to keycode */ -uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) -{ - if (layer < KEYMAPS_SIZE) { - return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); - } else { - return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]); - } -} - -/* translates Fn keycode to action */ -action_t keymap_fn_to_action(uint8_t keycode) -{ - action_t action; - if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) { - action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); - } else { - action.code = ACTION_NO; - } - return action; -} diff --git a/keyboard/hid_liber/keymap_alaricljs.h b/keyboard/hid_liber/keymap_alaricljs.h deleted file mode 100644 index 8903fc683b..0000000000 --- a/keyboard/hid_liber/keymap_alaricljs.h +++ /dev/null @@ -1,61 +0,0 @@ -// hid_liber alaricljs -// this was the standard layout when hid_liber was merged into tmk's firmware - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Layer 0: Default ANSI - * - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. - * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU| - * |-----------------------------------------------------------| |-----------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| - * |-----------------------------------------------------------| `-----------' - * |FN1 | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| ,---. - * |Shft|iso| Z| X| C| V| B| N| M| ,| .| /|Shift | |Up | - * |-----------------------------------------------------------| ,-----------. - * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| - * `-----------------------------------------------------------' `-----------' - */ - - KEYMAP(\ - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, BRK, \ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, INS, HOME, PGUP, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, END, PGDN, \ - FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \ - LSFT, NUBS, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL, LEFT, DOWN, RGHT), - -/* Layer 1: - * - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Slp| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. - * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9|Mut|V- |V+ |Backsp | |Ins|Hom|PgU| - * |-----------------------------------------------------------| |-----------| - * |Tab | Q| W| E| R| T| Y| U| I|MSt|Ply|Prv|Nxt|Media| |Del|End|PgD| - * |-----------------------------------------------------------| `-----------' - * |FN1 | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| ,---. - * |Shft|iso| Z| X|Clc| V| B| N| M| ,| .| /|Caps | |Up | - * |-----------------------------------------------------------| ,-----------. - * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| - * `-----------------------------------------------------------' `-----------' - */ - - KEYMAP(\ - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, SLEP, \ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9,MUTE, VOLD, VOLU, BSPC, INS, HOME, PGUP, \ - TAB, Q, W, E, R, T, Y, U, I,MSTP,MPLY, MPRV, MNXT, MSEL, DEL, END, PGDN, \ - FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \ - LSFT, NUBS, Z, X,CALC, V, B, N, M, COMM, DOT, SLSH, CAPS, UP, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL, LEFT, DOWN, RGHT), - -}; - -static const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // activate layer 1 when FN1 pressed -}; diff --git a/keyboard/hid_liber/keymap_ansi.h b/keyboard/hid_liber/keymap_ansi.h deleted file mode 100644 index 8ce85a4997..0000000000 --- a/keyboard/hid_liber/keymap_ansi.h +++ /dev/null @@ -1,32 +0,0 @@ -// hid_liber ANSI - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Layer 0: Default ANSI - * - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. - * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU| - * |-----------------------------------------------------------| |-----------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| - * |-----------------------------------------------------------| `-----------' - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| ,---. - * |Shft|iso| Z| X| C| V| B| N| M| ,| .| /|Shift | |Up | - * |-----------------------------------------------------------| ,-----------. - * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| - * `-----------------------------------------------------------' `-----------' - */ - - KEYMAP(\ - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, BRK, \ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, INS, HOME, PGUP, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, END, PGDN, \ - CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \ - LSFT, NUBS, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL, LEFT, DOWN, RGHT), - -}; - -static const uint16_t PROGMEM fn_actions[] = {}; diff --git a/keyboard/hid_liber/keymap_custom.h b/keyboard/hid_liber/keymap_custom.h deleted file mode 100644 index 03e1a1bfaf..0000000000 --- a/keyboard/hid_liber/keymap_custom.h +++ /dev/null @@ -1,64 +0,0 @@ -// hid_liber custom -// ANSI layout with FN key instead of APP button -// Layer 1 has mediakeys on the nav cluster and keypad numbers for alt-codes - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Layer 0: Default ANSI - * - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. - * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU| - * |-----------------------------------------------------------| |-----------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| - * |-----------------------------------------------------------| `-----------' - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| ,---. - * |Shft|iso| Z| X| C| V| B| N| M| ,| .| /|Shift | |Up | - * |-----------------------------------------------------------| ,-----------. - * |Ctl|Gui|Alt| Space |Alt|Gui|FN1|Ctl| |Lef|Dow|Rig| - * `-----------------------------------------------------------' `-----------' - */ - - KEYMAP(\ - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, BRK, \ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, INS, HOME, PGUP, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, END, PGDN, \ - CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \ - LSFT, NUBS, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, FN1, RCTL, LEFT, DOWN, RGHT), - -/* - * Layer 1: Media Keys - * Keypad numbers instead of normal numbers - * - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. - * |~ |KP1|KP2|KP3|KP4|KP5|KP6|KP7|KP8|KP9|KP0| -| =|Backsp | |Ins|Med|Vl+| - * |-----------------------------------------------------------| |-----------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|Mut|Vl-| - * |-----------------------------------------------------------| `-----------' - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| ,---. - * |Shft|iso| Z| X| C| V| B| N| M| ,| .| /|Shift | |Ply| - * |-----------------------------------------------------------| ,-----------. - * |Ctl|Gui|Alt| Space |Alt|Gui|FN1|Ctl| |Prv|Stp|Nxt| - * `-----------------------------------------------------------' `-----------' - */ - - KEYMAP(\ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ - TRNS, P1, P2, P3, P4, P5, P6, P7, P8, P9, P0, TRNS, TRNS, TRNS, TRNS, MSEL, VOLU, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MUTE, VOLD, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MPLY, \ - TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, MPRV, MSTP, MNXT), - -}; - -static const uint16_t PROGMEM fn_actions[] = { - [1] = ACTION_LAYER_MOMENTARY(1), // activate layer 1 when FN1 pressed -}; diff --git a/keyboard/hid_liber/keymap_iso.h b/keyboard/hid_liber/keymap_iso.h deleted file mode 100644 index c18453675b..0000000000 --- a/keyboard/hid_liber/keymap_iso.h +++ /dev/null @@ -1,32 +0,0 @@ -// hid_liber ISO - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Layer 0: Default ISO - * - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| - * `---' `---------------' `---------------' `---------------' `-----------' - * ,-----------------------------------------------------------. ,-----------. - * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU| - * |-----------------------------------------------------------| |-----------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| - * |-----------------------------------------------------------| `-----------' - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | - * |-----------------------------------------------------------| ,---. - * |Shft|iso| Z| X| C| V| B| N| M| ,| .| /|Shift | |Up | - * |-----------------------------------------------------------| ,-----------. - * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig| - * `-----------------------------------------------------------' `-----------' - */ - - KEYMAP(\ - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, BRK, \ - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, INS, HOME, PGUP, \ - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, NUHS, DEL, END, PGDN, \ - CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \ - LSFT, NUBS, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL, LEFT, DOWN, RGHT), - -}; - -static const uint16_t PROGMEM fn_actions[] = {}; diff --git a/keyboard/hid_liber/led.c b/keyboard/hid_liber/led.c deleted file mode 100644 index e577424c59..0000000000 --- a/keyboard/hid_liber/led.c +++ /dev/null @@ -1,34 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include "stdint.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - if (usb_led & (1<<USB_LED_CAPS_LOCK)) - PORTB &= ~(1<<5); - else - PORTB |= (1<<5); - - if (usb_led & (1<<USB_LED_SCROLL_LOCK)) - PORTB &= ~(1<<6); - else - PORTB |= (1<<6); -} diff --git a/keyboard/hid_liber/matrix.c b/keyboard/hid_liber/matrix.c deleted file mode 100644 index adf6ac8c42..0000000000 --- a/keyboard/hid_liber/matrix.c +++ /dev/null @@ -1,231 +0,0 @@ -/* Copyright 2012 Jun Wako <wakojun@gmail.com> - * - * This is heavily based on hid_liber/board.{c|h}. - * https://github.com/BathroomEpiphanies/AVR-Keyboard - * - * Copyright (c) 2012 Fredrik Atmer, Bathroom Epiphanies Inc - * http://bathroomepiphanies.com - * - * As for liscensing consult with the original files or its author. - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" - - -#ifndef DEBOUNCE -# define DEBOUNCE 0 -#endif -static uint8_t debouncing = DEBOUNCE; - -// bit array of key state(1:on, 0:off) -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - - -#define _DDRA (uint8_t *const)&DDRA -#define _DDRB (uint8_t *const)&DDRB -#define _DDRC (uint8_t *const)&DDRC -#define _DDRD (uint8_t *const)&DDRD -#define _DDRE (uint8_t *const)&DDRE -#define _DDRF (uint8_t *const)&DDRF - -#define _PINA (uint8_t *const)&PINA -#define _PINB (uint8_t *const)&PINB -#define _PINC (uint8_t *const)&PINC -#define _PIND (uint8_t *const)&PIND -#define _PINE (uint8_t *const)&PINE -#define _PINF (uint8_t *const)&PINF - -#define _PORTA (uint8_t *const)&PORTA -#define _PORTB (uint8_t *const)&PORTB -#define _PORTC (uint8_t *const)&PORTC -#define _PORTD (uint8_t *const)&PORTD -#define _PORTE (uint8_t *const)&PORTE -#define _PORTF (uint8_t *const)&PORTF - -#define _BIT0 0x01 -#define _BIT1 0x02 -#define _BIT2 0x04 -#define _BIT3 0x08 -#define _BIT4 0x10 -#define _BIT5 0x20 -#define _BIT6 0x40 -#define _BIT7 0x80 - -/* Specifies the ports and pin numbers for the rows */ -static -uint8_t *const row_ddr[MATRIX_ROWS] = { - _DDRB, _DDRB, - _DDRC, _DDRC, - _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, - _DDRF, _DDRF, _DDRF, _DDRF, _DDRF, _DDRF}; - -static -uint8_t *const row_port[MATRIX_ROWS] = { - _PORTB, _PORTB, - _PORTC, _PORTC, - _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, - _PORTF, _PORTF, _PORTF, _PORTF, _PORTF, _PORTF}; - -static -uint8_t *const row_pin[MATRIX_ROWS] = { - _PINB, _PINB, - _PINC, _PINC, - _PIND, _PIND, _PIND, _PIND, _PIND, _PIND, _PIND, _PIND, - _PINF, _PINF, _PINF, _PINF, _PINF, _PINF}; - -static -const uint8_t row_bit[MATRIX_ROWS] = { - _BIT4, _BIT7, - _BIT6, _BIT7, - _BIT0, _BIT1, _BIT2, _BIT3, _BIT4, _BIT5, _BIT6, _BIT7, - _BIT0, _BIT1, _BIT4, _BIT5, _BIT6, _BIT7}; - -static -const uint8_t mask = 0x0E; - -/* Specifies the ports and pin numbers for the columns */ -static -const uint8_t col_bit[MATRIX_COLS] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0E}; - -static -inline void pull_column(int col) { - PORTB = col_bit[col] | (PORTB & ~mask); -} - -static -inline void release_column(int col) { -} - -/* PORTB is set as input with pull-up resistors - PORTC,D,E,F are set to high output */ -static -void setup_io_pins(void) { - uint8_t row; - DDRB |= 0x0E; - PORTB &= ~0x0E; - for(row = 0; row < MATRIX_ROWS; row++) { - *row_ddr[row] &= ~row_bit[row]; - *row_port[row] &= ~row_bit[row]; - } -} - -static -void setup_leds(void) { - DDRB |= 0x60; - PORTB |= 0x60; -} - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - // To use PORTF disable JTAG with writing JTD bit twice within four cycles. - MCUCR |= (1<<JTD); - MCUCR |= (1<<JTD); - - // initialize row and col - setup_io_pins(); - setup_leds(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } -} - -uint8_t matrix_scan(void) -{ - for (uint8_t col = 0; col < MATRIX_COLS; col++) { // 0-7 - pull_column(col); // output hi on theline - _delay_us(5); // without this wait it won't read stable value. - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { // 0-17 - bool prev_bit = matrix_debouncing[row] & (1<<col); - bool curr_bit = *row_pin[row] & row_bit[row]; - if (prev_bit != curr_bit) { - matrix_debouncing[row] ^= ((matrix_row_t)1<<col); - if (debouncing) { - dprintf("bounce!: %02X\n", debouncing); - } - debouncing = DEBOUNCE; - } - } - release_column(col); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - return 1; -} - -bool matrix_is_modified(void) -{ - // NOTE: no longer used - return true; -} - -inline -bool matrix_has_ghost(void) -{ - return false; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 01234567\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - for (uint8_t j = 0; j < MATRIX_COLS; j++) { - if (matrix_is_on(i, j)) - count++; - } - } - return count; -} |