summaryrefslogtreecommitdiff
path: root/docs/config_options.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/config_options.md')
-rw-r--r--docs/config_options.md11
1 files changed, 9 insertions, 2 deletions
diff --git a/docs/config_options.md b/docs/config_options.md
index 63bcc41d0a..f5c2e76e7e 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -143,7 +143,7 @@ If you define these options you will enable the associated feature, which may in
* Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
* `#define LEADER_TIMEOUT 300`
* how long before the leader key times out
- * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.
+ * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.
* `#define LEADER_PER_KEY_TIMING`
* sets the timer for leader key chords to run on each key press rather than overall
* `#define LEADER_KEY_STRICT_KEY_PROCESSING`
@@ -197,6 +197,9 @@ If you define these options you will enable the associated feature, which may in
Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
+* `SPLIT_TRANSPORT = custom`
+ * Allows replacing the standard split communication routines with a custom one. ARM based split keyboards must use this at present.
+
### Setting Handedness
One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave.
@@ -208,7 +211,7 @@ There are a few different ways to set handedness for split keyboards (listed in
3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
-* `#define SPLIT_HAND_PIN B7`
+* `#define SPLIT_HAND_PIN B7`
* For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
@@ -302,6 +305,10 @@ Use these to enable or disable building certain features. The more you have enab
* Current options are AdafruitEzKey, AdafruitBLE, RN42
* `SPLIT_KEYBOARD`
* Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+* `CUSTOM_MATRIX`
+ * Allows replacing the standard matrix scanning routine with a custom one.
+* `CUSTOM_DEBOUNCE`
+ * Allows replacing the standard key debouncing routine with a custom one.
* `WAIT_FOR_USB`
* Forces the keyboard to wait for a USB connection to be established before it starts up
* `NO_USB_STARTUP_CHECK`