1 files changed, 0 insertions, 132 deletions
diff --git a/converter/usb_usb/main.cpp b/converter/usb_usb/main.cpp
deleted file mode 100644
index 652c805734..0000000000
--- a/converter/usb_usb/main.cpp
+++ /dev/null
@@ -1,132 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <util/delay.h>
-
-// USB HID host
-#include "Usb.h"
-#include "usbhub.h"
-#include "hid.h"
-#include "hidboot.h"
-#include "parser.h"
-
-// LUFA
-#include "lufa.h"
-
-#include "timer.h"
-#include "sendchar.h"
-#include "debug.h"
-#include "keyboard.h"
-#include "led.h"
-
-
-/* LED ping configuration */
-#define TMK_LED
-//#define LEONARDO_LED
-#if defined(TMK_LED)
-// For TMK converter and Teensy
-#define LED_TX_INIT    (DDRD  |=  (1<<6))
-#define LED_TX_ON      (PORTD |=  (1<<6))
-#define LED_TX_OFF     (PORTD &= ~(1<<6))
-#define LED_TX_TOGGLE  (PORTD ^=  (1<<6))
-#elif defined(LEONARDO_LED)
-// For Leonardo(TX LED)
-#define LED_TX_INIT    (DDRD  |=  (1<<5))
-#define LED_TX_ON      (PORTD &= ~(1<<5))
-#define LED_TX_OFF     (PORTD |=  (1<<5))
-#define LED_TX_TOGGLE  (PORTD ^=  (1<<5))
-#else
-#define LED_TX_INIT
-#define LED_TX_ON
-#define LED_TX_OFF
-#define LED_TX_TOGGLE
-#endif
-
-
-static void LUFA_setup(void)
-{
-    /* Disable watchdog if enabled by bootloader/fuses */
-    MCUSR &= ~(1 << WDRF);
-    wdt_disable();
-
-    /* Disable clock division */
-    clock_prescale_set(clock_div_1);
-
-    // Leonardo needs. Without this USB device is not recognized.
-    USB_Disable();
-
-    USB_Init();
-
-    // for Console_Task
-    USB_Device_EnableSOFEvents();
-    print_set_sendchar(sendchar);
-}
-
-
-
-/*
- * USB Host Shield HID keyboard
- */
-USB usb_host;
-USBHub hub1(&usb_host);
-HIDBoot<HID_PROTOCOL_KEYBOARD>    kbd(&usb_host);
-KBDReportParser kbd_parser;
-
-
-void led_set(uint8_t usb_led)
-{
-    kbd.SetReport(0, 0, 2, 0, 1, &usb_led);
-}
-
-
-
-int main(void)
-{
-    // LED for debug
-    LED_TX_INIT;
-    LED_TX_ON;
-
-    debug_enable = true;
-    debug_keyboard = true;
-
-    host_set_driver(&lufa_driver);
-    keyboard_init();
-
-    LUFA_setup();
-
-    // USB Host Shield setup
-    usb_host.Init();
-    kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser);
-
-    /* NOTE: Don't insert time consuming job here.
-     * It'll cause unclear initialization failure when DFU reset(worm start).
-     */
-    sei();
-
-    // wait for startup of sendchar routine
-    while (USB_DeviceState != DEVICE_STATE_Configured) ;
-    if (debug_enable) {
-        _delay_ms(1000);
-    }
-
-    debug("init: done\n");
-
-uint16_t timer;
-    for (;;) {
-        keyboard_task();
-
-timer = timer_read();
-        usb_host.Task();
-timer = timer_elapsed(timer);
-if (timer > 100) {
-    debug("host.Task: "); debug_hex16(timer);  debug("\n");
-}
-
-#if !defined(INTERRUPT_CONTROL_ENDPOINT)
-        // LUFA Task for control request
-        USB_USBTask();
-#endif
-    }
-
-    return 0;
-}