summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--docs/feature_pointing_device.md24
-rw-r--r--drivers/sensors/cirque_pinnacle.c7
2 files changed, 22 insertions, 9 deletions
diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md
index 250e2843f6..5dacc9f5ab 100644
--- a/docs/feature_pointing_device.md
+++ b/docs/feature_pointing_device.md
@@ -72,7 +72,6 @@ The Analog Joystick is an analog (ADC) driven sensor. There are a variety of jo
|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maximum value used for motion. | `2` |
|`ANALOG_JOYSTICK_CLICK_PIN` | (Optional) The pin wired up to the press switch of the analog stick. | _not defined_ |
-
### Cirque Trackpad
To use the Cirque Trackpad sensor, add this to your `rules.mk`:
@@ -96,21 +95,30 @@ This supports the Cirque Pinnacle 1CA027 Touch Controller, which is used in the
|`CIRQUE_PINNACLE_X_UPPER` | (Optional) The maximum reachable X value on the sensor. | `1919` |
|`CIRQUE_PINNACLE_Y_LOWER` | (Optional) The minimum reachable Y value on the sensor. | `63` |
|`CIRQUE_PINNACLE_Y_UPPER` | (Optional) The maximum reachable Y value on the sensor. | `1471` |
+|`CIRQUE_PINNACLE_ATTENUATION` | (Optional) Sets the attenuation of the sensor data. | `ADC_ATTENUATE_4X` |
|`CIRQUE_PINNACLE_TAPPING_TERM` | (Optional) Length of time that a touch can be to be considered a tap. | `TAPPING_TERM`/`200` |
|`CIRQUE_PINNACLE_TOUCH_DEBOUNCE` | (Optional) Length of time that a touch can be to be considered a tap. | `TAPPING_TERM`/`200` |
+**`CIRQUE_PINNACLE_ATTENUATION`** is a measure of how much data is suppressed in regards to sensitivity. The higher the attenuation, the less sensitive the touchpad will be.
+
+Default attenuation is set to 4X, although if you are using a thicker overlay (such as the curved overlay) you will want a lower attenuation such as 2X. The possible values are:
+* `ADC_ATTENUATE_4X`: Least sensitive
+* `ADC_ATTENUATE_3X`
+* `ADC_ATTENUATE_2X`
+* `ADC_ATTENUATE_1X`: Most sensitive
+
| I2C Setting | Description | Default |
|--------------------------|---------------------------------------------------------------------------------|---------|
|`CIRQUE_PINNACLE_ADDR` | (Required) Sets the I2C Address for the Cirque Trackpad | `0x2A` |
|`CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20` |
-| SPI Setting | Description | Default |
-|-------------------------------|------------------------------------------------------------------------|---------------|
-|`CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` |
-|`CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
-|`CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` |
-|`CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
-|`CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
+| SPI Setting | Description | Default |
+|-------------------------------|------------------------------------------------------------------------|----------------|
+|`CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` |
+|`CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
+|`CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` |
+|`CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
+|`CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
Default Scaling/CPI is 1024.
diff --git a/drivers/sensors/cirque_pinnacle.c b/drivers/sensors/cirque_pinnacle.c
index 2db7f916fe..670b96f2fb 100644
--- a/drivers/sensors/cirque_pinnacle.c
+++ b/drivers/sensors/cirque_pinnacle.c
@@ -38,6 +38,10 @@
#define ADC_ATTENUATE_3X 0x80
#define ADC_ATTENUATE_4X 0xC0
+#ifndef CIRQUE_PINNACLE_ATTENUATION
+# define CIRQUE_PINNACLE_ATTENUATION ADC_ATTENUATE_4X
+#endif
+
// Register config values for this demo
#define SYSCONFIG_1_VALUE 0x00
#define FEEDCONFIG_1_VALUE 0x03 // 0x03 for absolute mode 0x01 for relative mode
@@ -213,7 +217,8 @@ void cirque_pinnacle_init(void) {
// Host sets z-idle packet count to 5 (default is 30)
RAP_Write(Z_IDLE_COUNT, Z_IDLE_COUNT_VALUE);
- cirque_pinnacle_set_adc_attenuation(0xFF);
+ cirque_pinnacle_set_adc_attenuation(CIRQUE_PINNACLE_ATTENUATION);
+
cirque_pinnacle_tune_edge_sensitivity();
cirque_pinnacle_enable_feed(true);
}