diff options
| -rw-r--r-- | keyboard/gh60/Makefile.lufa | 120 | ||||
| -rw-r--r-- | keyboard/gh60/Makefile.pjrc | 90 | ||||
| -rw-r--r-- | keyboard/gh60/config.h | 50 | ||||
| -rw-r--r-- | keyboard/gh60/keymap.c | 187 | ||||
| -rw-r--r-- | keyboard/gh60/led.c | 34 | ||||
| -rw-r--r-- | keyboard/gh60/matrix.c | 225 |
6 files changed, 706 insertions, 0 deletions
diff --git a/keyboard/gh60/Makefile.lufa b/keyboard/gh60/Makefile.lufa new file mode 100644 index 0000000000..0977b33f3c --- /dev/null +++ b/keyboard/gh60/Makefile.lufa @@ -0,0 +1,120 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + + +# List C source files here. (C dependencies are automatically generated.) +SRC += keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Build Options +# comment out to disable the options. +# +#MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOT_SIZE=4096 + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/gh60/Makefile.pjrc b/keyboard/gh60/Makefile.pjrc new file mode 100644 index 0000000000..dc5b2f7431 --- /dev/null +++ b/keyboard/gh60/Makefile.pjrc @@ -0,0 +1,90 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# comment out to disable the options. +# +#MOUSEKEY_ENABLE = yes # Mouse keys +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +EXTRAKEY_ENABLE = yes # Audio control and System control +NKRO_ENABLE = yes # USB Nkey Rollover +CONSOLE_ENABLE = yes # Console for debug + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/gh60/config.h b/keyboard/gh60/config.h new file mode 100644 index 0000000000..6e7b1bd7a5 --- /dev/null +++ b/keyboard/gh60/config.h @@ -0,0 +1,50 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT GH60 + + +/* message strings */ +#define DESCRIPTION t.m.k. keyboard firmware for GH60 + + +/* matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if need no debouncing */ +#define DEBOUNCE 5 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboard/gh60/keymap.c b/keyboard/gh60/keymap.c new file mode 100644 index 0000000000..7ccae1a81b --- /dev/null +++ b/keyboard/gh60/keymap.c @@ -0,0 +1,187 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "keymap.h" + + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4C, K4D \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ +} + +#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) + + +// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. +static const uint8_t PROGMEM fn_layer[] = { + 0, // Fn0 + 1, // Fn1 + 2, // Fn2 + 3, // Fn3 + 4, // Fn4 + 0, // Fn5 + 3, // Fn6 + 3 // Fn7 +}; + +// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. +// See layer.c for details. +static const uint8_t PROGMEM fn_keycode[] = { + KC_NO, // Fn0 + KC_NO, // Fn1 + KC_SLSH, // Fn2 + KC_SCLN, // Fn3 + KC_SPC, // Fn4 + KC_NO, // Fn5 + KC_NO, // Fn6 + KC_NO // Fn7 +}; + +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0: Default Layer + * ,-----------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + * |-----------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + * |-----------------------------------------------------------| + * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + * |-----------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | + * |-----------------------------------------------------------| + * |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl| + * `-----------------------------------------------------------' + */ + KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \ + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NO, ENT, \ + LSFT,NO, Z, X, C, V, B, N, M, COMM,DOT, SLSH,NO, RSFT, \ + LCTL,LGUI,LALT, SPC, RALT,GRV, FN6, RCTL), + + +#if 0 + /* Layer 1: HHKB mode (HHKB Fn) + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + * |-----------------------------------------------------------| + * |Caps | | | | | | | |Psc|Slk|Pus|Up | | | + * |-----------------------------------------------------' | + * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter | + * |-----------------------------------------------------------| + * |Shift | | | | | | +| -|End|PgD|Dow|Shift |xxx| + * |-----------------------------------------------------------| + * | |Gui |Alt | |Alt |Gui| | |Ctr| + * `-----------------------------------------------------------' + */ + KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, \ + CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, NLCK,\ + LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \ + LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,FN1, \ + NO, LGUI,LALT,SPC, RALT,NO, NO, NO, RCTL), + + + /* Layer 2: Vi mode (Quote/Rmeta) + * ,-----------------------------------------------------------. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` | + * |-----------------------------------------------------------| + * | \ |Hom|PgD|Up |PgU|End|Hom|PgD|PgU|End| | | | | + * |-----------------------------------------------------' | + * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | | \ | + * |-----------------------------------------------------------| + * |Shift | | | | | |Hom|PgD|PgU|End|xxx|Shift | | + * |-----------------------------------------------------------| + * | |Gui |Alt |Space |Alt |Gui|Fn6|Fn6|Ctr| + * `-----------------------------------------------------------' + */ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \ + BSLS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, NO, \ + LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, BSLS, \ + LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,NO, \ + NO, LGUI,LALT,SPC, RALT,RGUI,FN6, FN6, RCTL), + + + /* Layer 3: Mouse mode (Semicolon) + * ,-----------------------------------------------------------. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| ` | + * |-----------------------------------------------------------| + * | \ |MwL|MwD|McU|MwU|MwR|MwL|MwD|MwU|MwR| | | | | + * |-----------------------------------------------------' | + * |Contro| |McL|McD|McR| |McL|McD|McU|McR|xxx| | \ | + * |-----------------------------------------------------------| + * |Shift | | |Mb1|Mb2|Mb3|Mb2|Mb1| | | |Shift | | + * |-----------------------------------------------------------| + * |xxx|Gui |Alt |Mb1 |Alt | | | | | + * `-----------------------------------------------------------' + * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel + */ + KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, GRV, \ + BSLS,WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO, \ + LCTL,NO, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN3, NO, BSLS, \ + LSFT,NO, NO, BTN1,BTN2,BTN3,BTN2,BTN1,NO, NO, NO, RSFT,NO, \ + FN7, LGUI,LALT,BTN1,RALT,NO, FN6, FN6, NO), + + + /* Layer 4: Matias half keyboard style (Space) + * ,-----------------------------------------------------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + * |-----------------------------------------------------------| + * |Backs| P| O| I| U| Y| T| R| E| W| Q|Tab|Tab| | + * |-----------------------------------------------------' | + * |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control | + * |-----------------------------------------------------------| + * |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | | + * |-----------------------------------------------------------| + * | |Gui |Alt |xxxxxxxxxxxxxxxxxxxxxx|Alt |Gui| | |Ctr| + * `-----------------------------------------------------------' + */ + KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, ESC, \ + BSPC,P, O, I, U, Y, T, R, E, W, Q, TAB, TAB, TAB, \ + LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \ + LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \ + NO, LGUI,LALT,FN4, RALT,RGUI,NO, NO, RCTL), +#endif +}; + + +uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) +{ + return KEYCODE(layer, row, col); +} + +uint8_t keymap_fn_layer(uint8_t index) +{ + return pgm_read_byte(&fn_layer[index]); +} + +uint8_t keymap_fn_keycode(uint8_t index) +{ + return pgm_read_byte(&fn_keycode[index]); +} diff --git a/keyboard/gh60/led.c b/keyboard/gh60/led.c new file mode 100644 index 0000000000..62abcd79da --- /dev/null +++ b/keyboard/gh60/led.c @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output low + DDRB |= (1<<2); + PORTB &= ~(1<<2); + } else { + // Hi-Z + DDRB &= ~(1<<2); + PORTB &= ~(1<<2); + } +} diff --git a/keyboard/gh60/matrix.c b/keyboard/gh60/matrix.c new file mode 100644 index 0000000000..4c18a61912 --- /dev/null +++ b/keyboard/gh60/matrix.c @@ -0,0 +1,225 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +// matrix state buffer(1:on, 0:off) +static uint16_t *matrix; +static uint16_t *matrix_prev; +static uint16_t _matrix0[MATRIX_ROWS]; +static uint16_t _matrix1[MATRIX_ROWS]; + +static uint16_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0; + for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0; + matrix = _matrix0; + matrix_prev = _matrix1; +} + +uint8_t matrix_scan(void) +{ + if (!debouncing) { + uint16_t *tmp = matrix_prev; + matrix_prev = matrix; + matrix = tmp; + } + + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + unselect_rows(); + select_row(i); + _delay_us(1); // without this wait read unstable value. + uint16_t cols = ~read_cols(); + if (matrix[i] != cols) { + matrix[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); print("\n"); + } + debouncing = DEBOUNCE; + } + } + unselect_rows(); + + if (debouncing) { + debouncing--; + _delay_ms(1); // improved affect on bouncing + } + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + if (matrix[i] != matrix_prev[i]) { + return true; + } + } + return false; +} + +inline +bool matrix_has_ghost(void) +{ + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +inline +uint16_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +/* Column pin configuration + * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + * pin: F0 F1 E6 C7 C6 B6 D4 B1 B0 B5 B4 D7 D6 B3 + */ +static void init_cols(void) +{ + // Input with pull-up(DDR:0, PORT:1) + DDRF &= ~(1<<0 | 1<<1); + PORTF |= (1<<0 | 1<<1); + DDRE &= ~(1<<6); + PORTE |= (1<<6); + DDRD &= ~(1<<7 | 1<<6 | 1<<4); + PORTD |= (1<<7 | 1<<6 | 1<<4); + DDRC &= ~(1<<7 | 1<<6); + PORTC |= (1<<7 | 1<<6); + DDRB &= ~(1<<6 | 1<< 5 | 1<<4 | 1<<3 | 1<<1 | 1<<0); + PORTB |= (1<<6 | 1<< 5 | 1<<4 | 1<<3 | 1<<1 | 1<<0); +} + +static uint16_t read_cols(void) +{ + return (PINF&(1<<0) ? (1<<0) : 0) | + (PINF&(1<<1) ? (1<<1) : 0) | + (PINE&(1<<6) ? (1<<2) : 0) | + (PINC&(1<<7) ? (1<<3) : 0) | + (PINC&(1<<6) ? (1<<4) : 0) | + (PINB&(1<<6) ? (1<<5) : 0) | + (PIND&(1<<4) ? (1<<6) : 0) | + (PINB&(1<<1) ? (1<<7) : 0) | + (PINB&(1<<0) ? (1<<8) : 0) | + (PINB&(1<<5) ? (1<<9) : 0) | + (PINB&(1<<4) ? (1<<10) : 0) | + (PIND&(1<<7) ? (1<<11) : 0) | + (PIND&(1<<6) ? (1<<12) : 0) | + (PINB&(1<<3) ? (1<<13) : 0); +} + +/* Row pin configuration + * row: 0 1 2 3 4 + * pin: D0 D1 D2 D3 D5 + */ +static void unselect_rows(void) +{ + // Hi-Z(DDR:0, PORT:0) to unselect + DDRD &= ~0b00101111; + PORTD &= ~0b00101111; +} + +static void select_row(uint8_t row) +{ + // Output low(DDR:1, PORT:0) to select + switch (row) { + case 0: + DDRD |= (1<<0); + PORTD &= ~(1<<0); + break; + case 1: + DDRD |= (1<<1); + PORTD &= ~(1<<1); + break; + case 2: + DDRD |= (1<<2); + PORTD &= ~(1<<2); + break; + case 3: + DDRD |= (1<<3); + PORTD &= ~(1<<3); + break; + case 4: + DDRD |= (1<<5); + PORTD &= ~(1<<5); + break; + } +} |