diff options
31 files changed, 0 insertions, 1953 deletions
diff --git a/keyboards/DeltaSplit75/DeltaSplit75.c b/keyboards/DeltaSplit75/DeltaSplit75.c deleted file mode 100644 index 6a73db4cd6..0000000000 --- a/keyboards/DeltaSplit75/DeltaSplit75.c +++ /dev/null @@ -1 +0,0 @@ -#include "deltasplit75.h"
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/DeltaSplit75.h b/keyboards/DeltaSplit75/DeltaSplit75.h deleted file mode 100644 index 31480f773d..0000000000 --- a/keyboards/DeltaSplit75/DeltaSplit75.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef deltasplit75_H -#define deltasplit75_H - -#ifdef SUBPROJECT_v2 - #include "v2.h" -#endif -#ifdef SUBPROJECT_ProtoSplit - #include "ProtoSplit.h" -#endif - -#include "quantum.h" - -#endif
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/Makefile b/keyboards/DeltaSplit75/Makefile deleted file mode 100644 index d1dec53302..0000000000 --- a/keyboards/DeltaSplit75/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -SUBPROJECT_DEFAULT = v2 - -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif diff --git a/keyboards/DeltaSplit75/ProtoSplit/Makefile b/keyboards/DeltaSplit75/ProtoSplit/Makefile deleted file mode 100644 index 4e2a6f00fd..0000000000 --- a/keyboards/DeltaSplit75/ProtoSplit/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.c b/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.c deleted file mode 100644 index 1199257d04..0000000000 --- a/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.c +++ /dev/null @@ -1,32 +0,0 @@ -#include "DeltaSplit75.h" - -#ifdef AUDIO_ENABLE - float tone_startup[][2] = SONG(STARTUP_SOUND); - float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - -void matrix_init_kb(void) { - - #ifdef AUDIO_ENABLE - _delay_ms(20); // gets rid of tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); - #endif - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - -void shutdown_user(void) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); - #endif -} diff --git a/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.h b/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.h deleted file mode 100644 index 20aa5cbe85..0000000000 --- a/keyboards/DeltaSplit75/ProtoSplit/ProtoSplit.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef ProtoSplit_H -#define ProtoSplit_H - -#include "../DeltaSplit75.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - -//void promicro_bootloader_jmp(bool program); -//matrix is defined in a weird way here; the layout on both sides are asymmetrical, but the "matrix" is symmetrical but with empty gaps -//the last column is defined as a separate row because the firmware currently doesnt support more than 8 columns (this layout has 9 columns per side) K45 and K110 are the Bs on both sides -#define KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K70, K71, K72, K73, K74, K75, K76, K77, K132, \ - K10, K11, K12, K13, K14, K15, K16, K80, K81, K82, K83, K84, K85, K86, K87, K133, \ - K20, K21, K22, K23, K24, K25, K90, K91, K92, K93, K94, K95, K96, K97, K134, \ - K30, K31, K32, K33, K34, K35, K100, K101, K102, K103, K104, K105, K107, K135, \ - K40, K41, K42, K43, K44, K45, K110, K111, K112, K113, K114, K115, K116, K117, K136, \ - K50, K51, K52, K54, K55, K120, K121, K122, K123, K126, K127, K137 \ - ) \ - { \ - { K00, K01, K02, K03, K04, K05, K06, KC_NO}, \ - { K10, K11, K12, K13, K14, K15, K16, KC_NO}, \ - { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO}, \ - { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO}, \ - { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO}, \ - { K50, K51, K52, KC_NO, K54, K55, KC_NO, KC_NO}, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \ - { K70 , K71, K72, K73, K74, K75, K76, K77}, \ - { K80, K81, K82, K83, K84, K85, K86, K87}, \ - { K90, K91, K92, K93, K94, K95, K96, K97}, \ - { K100, K101, K102, K103, K104, K105, KC_NO, K107}, \ - { K110, K111, K112, K113, K114, K115, K116, K117}, \ - { K120, K121, K122, K123, KC_NO, KC_NO, K126, K127}, \ - { KC_NO, KC_NO, K132, K133, K134, K135, K136, K137} \ - } - -#endif
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/ProtoSplit/config.h b/keyboards/DeltaSplit75/ProtoSplit/config.h deleted file mode 100644 index 0f4b806e2d..0000000000 --- a/keyboards/DeltaSplit75/ProtoSplit/config.h +++ /dev/null @@ -1,90 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER xyxjj -#define PRODUCT DeltaSplit75 -#define DESCRIPTION 75% split keyboard - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 14 -#define MATRIX_COLS 8 - -// wiring of each half -#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 } -#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1} - -#define CATERINA_BOOTLOADER - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -#endif
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/ProtoSplit/rules.mk b/keyboards/DeltaSplit75/ProtoSplit/rules.mk deleted file mode 100644 index 80a942d06f..0000000000 --- a/keyboards/DeltaSplit75/ProtoSplit/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -BACKLIGHT_ENABLE = no - -ifndef QUANTUM_DIR - include ../../../Makefile -endif diff --git a/keyboards/DeltaSplit75/V2/Makefile b/keyboards/DeltaSplit75/V2/Makefile deleted file mode 100644 index 4e2a6f00fd..0000000000 --- a/keyboards/DeltaSplit75/V2/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -ifndef MAKEFILE_INCLUDED - include ../../Makefile -endif
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/V2/V2.c b/keyboards/DeltaSplit75/V2/V2.c deleted file mode 100644 index ce260ce7cc..0000000000 --- a/keyboards/DeltaSplit75/V2/V2.c +++ /dev/null @@ -1,32 +0,0 @@ -#include "deltasplit75.h" - -#ifdef AUDIO_ENABLE - float tone_startup[][2] = SONG(STARTUP_SOUND); - float tone_goodbye[][2] = SONG(GOODBYE_SOUND); -#endif - -void matrix_init_kb(void) { - - #ifdef AUDIO_ENABLE - _delay_ms(20); // gets rid of tick - PLAY_NOTE_ARRAY(tone_startup, false, 0); - #endif - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - -void shutdown_user(void) { - #ifdef AUDIO_ENABLE - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); - #endif -} diff --git a/keyboards/DeltaSplit75/V2/V2.h b/keyboards/DeltaSplit75/V2/V2.h deleted file mode 100644 index 97be7eb0e9..0000000000 --- a/keyboards/DeltaSplit75/V2/V2.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef v2_H -#define v2_H - -#include "../deltasplit75.h" - -//void promicro_bootloader_jmp(bool program); -#include "quantum.h" - -//void promicro_bootloader_jmp(bool program); -//matrix is defined in a weird way here; the layout on both sides are asymmetrical, but the "matrix" is symmetrical but with empty gaps -//the last column is defined as a separate row because the firmware currently doesnt support more than 8 columns (this layout has 9 columns per side) K45 and K110 are the Bs on both sides; K53 and K106 are extra keys for ISO -#define KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K70, K71, K72, K73, K74, K75, K76, K77, K132, \ - K10, K11, K12, K13, K14, K15, K16, K80, K81, K82, K83, K84, K85, K86, K87, K133, \ - K20, K21, K22, K23, K24, K25, K90, K91, K92, K93, K94, K95, K96, K97, K134, \ - K30, K31, K32, K33, K34, K35, K100, K101, K102, K103, K104, K105, K106, K107, K135, \ - K40, K53, K41, K42, K43, K44, K45, K110, K111, K112, K113, K114, K115, K116, K117, K136, \ - K50, K51, K52, K54, K55, K120, K121, K122, K123, K126, K127, K137 \ - ) \ - { \ - { K00, K01, K02, K03, K04, K05, K06, KC_NO}, \ - { K10, K11, K12, K13, K14, K15, K16, KC_NO}, \ - { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO}, \ - { K30, K31, K32, K33, K34, K35, KC_NO, KC_NO}, \ - { K40, K41, K42, K43, K44, K45, KC_NO, KC_NO}, \ - { K50, K51, K52, K53, K54, K55, KC_NO, KC_NO}, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, \ - { K70 , K71, K72, K73, K74, K75, K76, K77}, \ - { K80, K81, K82, K83, K84, K85, K86, K87}, \ - { K90, K91, K92, K93, K94, K95, K96, K97}, \ - { K100, K101, K102, K103, K104, K105, K106, K107}, \ - { K110, K111, K112, K113, K114, K115, K116, K117}, \ - { K120, K121, K122, K123, KC_NO, KC_NO, K126, K127}, \ - { KC_NO, KC_NO, K132, K133, K134, K135, K136, K137} \ - } - -#endif
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/V2/config.h b/keyboards/DeltaSplit75/V2/config.h deleted file mode 100644 index 0f4b806e2d..0000000000 --- a/keyboards/DeltaSplit75/V2/config.h +++ /dev/null @@ -1,90 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER xyxjj -#define PRODUCT DeltaSplit75 -#define DESCRIPTION 75% split keyboard - -/* key matrix size */ -// Rows are doubled-up -#define MATRIX_ROWS 14 -#define MATRIX_COLS 8 - -// wiring of each half -#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 } -#define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1} - -#define CATERINA_BOOTLOADER - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* ws2812 RGB LED */ -#define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 12 // Number of LEDs -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - - -#endif
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/V2/rules.mk b/keyboards/DeltaSplit75/V2/rules.mk deleted file mode 100644 index 80a942d06f..0000000000 --- a/keyboards/DeltaSplit75/V2/rules.mk +++ /dev/null @@ -1,5 +0,0 @@ -BACKLIGHT_ENABLE = no - -ifndef QUANTUM_DIR - include ../../../Makefile -endif diff --git a/keyboards/DeltaSplit75/config.h b/keyboards/DeltaSplit75/config.h deleted file mode 100644 index f0d43dc3ef..0000000000 --- a/keyboards/DeltaSplit75/config.h +++ /dev/null @@ -1,29 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -#ifdef SUBPROJECT_RightB - #include "RightB/config.h" -#endif -#ifdef SUBPROJECT_V2 - #include "v2/config.h" -#endif -#endif diff --git a/keyboards/DeltaSplit75/deltasplit build guide.pdf b/keyboards/DeltaSplit75/deltasplit build guide.pdf Binary files differdeleted file mode 100644 index 045b4a3985..0000000000 --- a/keyboards/DeltaSplit75/deltasplit build guide.pdf +++ /dev/null diff --git a/keyboards/DeltaSplit75/eeprom-lefthand.eep b/keyboards/DeltaSplit75/eeprom-lefthand.eep deleted file mode 100644 index b9666a74c0..0000000000 --- a/keyboards/DeltaSplit75/eeprom-lefthand.eep +++ /dev/null @@ -1,2 +0,0 @@ -:0B0000000000000000000000000001F4
-:00000001FF
diff --git a/keyboards/DeltaSplit75/eeprom-righthand.eep b/keyboards/DeltaSplit75/eeprom-righthand.eep deleted file mode 100644 index 94cc5be7fc..0000000000 --- a/keyboards/DeltaSplit75/eeprom-righthand.eep +++ /dev/null @@ -1,2 +0,0 @@ -:0B0000000000000000000000000000F5
-:00000001FF
diff --git a/keyboards/DeltaSplit75/i2c.c b/keyboards/DeltaSplit75/i2c.c deleted file mode 100644 index 084c890c40..0000000000 --- a/keyboards/DeltaSplit75/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/DeltaSplit75/i2c.h b/keyboards/DeltaSplit75/i2c.h deleted file mode 100644 index 08ce4b0093..0000000000 --- a/keyboards/DeltaSplit75/i2c.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef I2C_H -#define I2C_H - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency -#define SCL_CLOCK 100000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - -#endif diff --git a/keyboards/DeltaSplit75/keymaps/Default/config.h b/keyboards/DeltaSplit75/keymaps/Default/config.h deleted file mode 100644 index 56df3f1607..0000000000 --- a/keyboards/DeltaSplit75/keymaps/Default/config.h +++ /dev/null @@ -1,31 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - - -#define USE_SERIAL - -#define MASTER_LEFT -// #define _MASTER_RIGHT -// #define EE_HANDS - - -#ifdef SUBPROJECT_v2 - #include "../../v2/config.h" -#endif -#ifdef SUBPROJECT_ProtoSplit - #include "../../ProtoSplit/config.h" -#endif diff --git a/keyboards/DeltaSplit75/keymaps/Default/keymap.c b/keyboards/DeltaSplit75/keymaps/Default/keymap.c deleted file mode 100644 index 99707702be..0000000000 --- a/keyboards/DeltaSplit75/keymaps/Default/keymap.c +++ /dev/null @@ -1,31 +0,0 @@ -#include "deltasplit75.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -// Fillers to make layering more clear - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - KEYMAP( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_END, KC_PGDN, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_SLCK, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_TRNS, KC_ENT, KC_PAUS, //modify KC_TRNS to enable ISO Support - KC_LSFT, KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PSCR, //modify KC_TRNS to enable ISO Support - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, - KC_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_VOLU, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - M(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_VOLD, M(0), KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -};
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/keymaps/ProtoSplit/config.h b/keyboards/DeltaSplit75/keymaps/ProtoSplit/config.h deleted file mode 100644 index 12a1402d98..0000000000 --- a/keyboards/DeltaSplit75/keymaps/ProtoSplit/config.h +++ /dev/null @@ -1,31 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - - -#define USE_SERIAL - -#define MASTER_LEFT -// #define _MASTER_RIGHT -// #define EE_HANDS - - -#ifdef SUBPROJECT_V2 - #include "../../V2/config.h" -#endif -#ifdef SUBPROJECT_ProtoSplit - #include "../../ProtoSplit/config.h" -#endif diff --git a/keyboards/DeltaSplit75/keymaps/ProtoSplit/keymap.c b/keyboards/DeltaSplit75/keymaps/ProtoSplit/keymap.c deleted file mode 100644 index eec0f99740..0000000000 --- a/keyboards/DeltaSplit75/keymaps/ProtoSplit/keymap.c +++ /dev/null @@ -1,31 +0,0 @@ -#include "DeltaSplit75.h" -#include "action_layer.h" -#include "eeconfig.h" - -extern keymap_config_t keymap_config; - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. - -// Fillers to make layering more clear - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - KEYMAP( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_PGUP, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_END, KC_PGDN, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_SLCK, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PAUS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PSCR, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - - KEYMAP( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, - KC_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_VOLU, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - M(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_VOLD, M(0), KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -};
\ No newline at end of file diff --git a/keyboards/DeltaSplit75/matrix.c b/keyboards/DeltaSplit75/matrix.c deleted file mode 100644 index 1389690042..0000000000 --- a/keyboards/DeltaSplit75/matrix.c +++ /dev/null @@ -1,318 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - int ret = _matrix_scan(); - - - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - - matrix_scan_quantum(); - - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); - -#ifdef USE_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/DeltaSplit75/pro_micro.h b/keyboards/DeltaSplit75/pro_micro.h deleted file mode 100644 index f9e7ed75d9..0000000000 --- a/keyboards/DeltaSplit75/pro_micro.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -// Workaround for wrong definitions in "iom32u4.h". -// This should be fixed in the AVR toolchain. -#undef UHCON -#undef UHINT -#undef UHIEN -#undef UHADDR -#undef UHFNUM -#undef UHFNUML -#undef UHFNUMH -#undef UHFLEN -#undef UPINRQX -#undef UPINTX -#undef UPNUM -#undef UPRST -#undef UPCONX -#undef UPCFG0X -#undef UPCFG1X -#undef UPSTAX -#undef UPCFG2X -#undef UPIENX -#undef UPDATX -#undef TCCR2A -#undef WGM20 -#undef WGM21 -#undef COM2B0 -#undef COM2B1 -#undef COM2A0 -#undef COM2A1 -#undef TCCR2B -#undef CS20 -#undef CS21 -#undef CS22 -#undef WGM22 -#undef FOC2B -#undef FOC2A -#undef TCNT2 -#undef TCNT2_0 -#undef TCNT2_1 -#undef TCNT2_2 -#undef TCNT2_3 -#undef TCNT2_4 -#undef TCNT2_5 -#undef TCNT2_6 -#undef TCNT2_7 -#undef OCR2A -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 -#undef OCR2B -#undef OCR2_0 -#undef OCR2_1 -#undef OCR2_2 -#undef OCR2_3 -#undef OCR2_4 -#undef OCR2_5 -#undef OCR2_6 -#undef OCR2_7 - -#define NUM_DIGITAL_PINS 30 -#define NUM_ANALOG_INPUTS 12 - -#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) -#define TXLED0 PORTD |= (1<<5) -#define TXLED1 PORTD &= ~(1<<5) -#define RXLED0 PORTB |= (1<<0) -#define RXLED1 PORTB &= ~(1<<0) - -static const uint8_t SDA = 2; -static const uint8_t SCL = 3; -#define LED_BUILTIN 13 - -// Map SPI port to 'new' pins D14..D17 -static const uint8_t SS = 17; -static const uint8_t MOSI = 16; -static const uint8_t MISO = 14; -static const uint8_t SCK = 15; - -// Mapping of analog pins as digital I/O -// A6-A11 share with digital pins -static const uint8_t ADC0 = 18; -static const uint8_t ADC1 = 19; -static const uint8_t ADC2 = 20; -static const uint8_t ADC3 = 21; -static const uint8_t ADC4 = 22; -static const uint8_t ADC5 = 23; -static const uint8_t ADC6 = 24; // D4 -static const uint8_t ADC7 = 25; // D6 -static const uint8_t ADC8 = 26; // D8 -static const uint8_t ADC9 = 27; // D9 -static const uint8_t ADC10 = 28; // D10 -static const uint8_t ADC11 = 29; // D12 - -#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) 0 -#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) -#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) - -// __AVR_ATmega32U4__ has an unusual mapping of pins to channels -extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; -#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) - -#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA32U4 / ARDUINO LEONARDO -// -// D0 PD2 RXD1/INT2 -// D1 PD3 TXD1/INT3 -// D2 PD1 SDA SDA/INT1 -// D3# PD0 PWM8/SCL OC0B/SCL/INT0 -// D4 A6 PD4 ADC8 -// D5# PC6 ??? OC3A/#OC4A -// D6# A7 PD7 FastPWM #OC4D/ADC10 -// D7 PE6 INT6/AIN0 -// -// D8 A8 PB4 ADC11/PCINT4 -// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 -// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 -// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 -// D12 A11 PD6 T1/#OC4D/ADC9 -// D13# PC7 PWM10 CLK0/OC4A -// -// A0 D18 PF7 ADC7 -// A1 D19 PF6 ADC6 -// A2 D20 PF5 ADC5 -// A3 D21 PF4 ADC4 -// A4 D22 PF1 ADC1 -// A5 D23 PF0 ADC0 -// -// New pins D14..D17 to map SPI port to digital pins -// -// MISO D14 PB3 MISO,PCINT3 -// SCK D15 PB1 SCK,PCINT1 -// MOSI D16 PB2 MOSI,PCINT2 -// SS D17 PB0 RXLED,SS/PCINT0 -// -// Connected LEDs on board for TX and RX -// TXLED D24 PD5 XCK1 -// RXLED D17 PB0 -// HWB PE2 HWB - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, // D0 - PD2 - PD, // D1 - PD3 - PD, // D2 - PD1 - PD, // D3 - PD0 - PD, // D4 - PD4 - PC, // D5 - PC6 - PD, // D6 - PD7 - PE, // D7 - PE6 - - PB, // D8 - PB4 - PB, // D9 - PB5 - PB, // D10 - PB6 - PB, // D11 - PB7 - PD, // D12 - PD6 - PC, // D13 - PC7 - - PB, // D14 - MISO - PB3 - PB, // D15 - SCK - PB1 - PB, // D16 - MOSI - PB2 - PB, // D17 - SS - PB0 - - PF, // D18 - A0 - PF7 - PF, // D19 - A1 - PF6 - PF, // D20 - A2 - PF5 - PF, // D21 - A3 - PF4 - PF, // D22 - A4 - PF1 - PF, // D23 - A5 - PF0 - - PD, // D24 - PD5 - PD, // D25 / D6 - A7 - PD7 - PB, // D26 / D8 - A8 - PB4 - PB, // D27 / D9 - A9 - PB5 - PB, // D28 / D10 - A10 - PB6 - PD, // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(2), // D0 - PD2 - _BV(3), // D1 - PD3 - _BV(1), // D2 - PD1 - _BV(0), // D3 - PD0 - _BV(4), // D4 - PD4 - _BV(6), // D5 - PC6 - _BV(7), // D6 - PD7 - _BV(6), // D7 - PE6 - - _BV(4), // D8 - PB4 - _BV(5), // D9 - PB5 - _BV(6), // D10 - PB6 - _BV(7), // D11 - PB7 - _BV(6), // D12 - PD6 - _BV(7), // D13 - PC7 - - _BV(3), // D14 - MISO - PB3 - _BV(1), // D15 - SCK - PB1 - _BV(2), // D16 - MOSI - PB2 - _BV(0), // D17 - SS - PB0 - - _BV(7), // D18 - A0 - PF7 - _BV(6), // D19 - A1 - PF6 - _BV(5), // D20 - A2 - PF5 - _BV(4), // D21 - A3 - PF4 - _BV(1), // D22 - A4 - PF1 - _BV(0), // D23 - A5 - PF0 - - _BV(5), // D24 - PD5 - _BV(7), // D25 / D6 - A7 - PD7 - _BV(4), // D26 / D8 - A8 - PB4 - _BV(5), // D27 / D9 - A9 - PB5 - _BV(6), // D28 / D10 - A10 - PB6 - _BV(6), // D29 / D12 - A11 - PD6 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER0B, /* 3 */ - NOT_ON_TIMER, - TIMER3A, /* 5 */ - TIMER4D, /* 6 */ - NOT_ON_TIMER, - - NOT_ON_TIMER, - TIMER1A, /* 9 */ - TIMER1B, /* 10 */ - TIMER0A, /* 11 */ - - NOT_ON_TIMER, - TIMER4A, /* 13 */ - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { - 7, // A0 PF7 ADC7 - 6, // A1 PF6 ADC6 - 5, // A2 PF5 ADC5 - 4, // A3 PF4 ADC4 - 1, // A4 PF1 ADC1 - 0, // A5 PF0 ADC0 - 8, // A6 D4 PD4 ADC8 - 10, // A7 D6 PD7 ADC10 - 11, // A8 D8 PB4 ADC11 - 12, // A9 D9 PB5 ADC12 - 13, // A10 D10 PB6 ADC13 - 9 // A11 D12 PD6 ADC9 -}; - -#endif /* ARDUINO_MAIN */ - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_USBVIRTUAL Serial -#define SERIAL_PORT_HARDWARE Serial1 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 - -#endif /* Pins_Arduino_h */ diff --git a/keyboards/DeltaSplit75/readme.md b/keyboards/DeltaSplit75/readme.md deleted file mode 100644 index 4372b15b7f..0000000000 --- a/keyboards/DeltaSplit75/readme.md +++ /dev/null @@ -1,126 +0,0 @@ -DeltaSplit75 -====== - -This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split - -Credit to ahtn and wootpatoot for work on the split keyboard firmware - -Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 -based boards. - -## Case Files -Files are available here: https://github.com/xyxjj/DeltaSplit75-Case-files - - -## First Time Setup - -Download or clone the whole firmware and navigate to the keyboards/DeltaSplit75 directory. Once your dev env is setup, you'll be able to generate the default .hex using: - -``` -make V2 - -or - -make ProtoSplit-ProtoSplit (if you have one of the prototype PCBs) -``` - -You will see a lot of output and if everything worked correctly you will see the built hex files: - -``` -DeltaSplit75_ProtoSplit_ProtoSplit.hex - -or - -DeltaSplit75_V2_Default.hex - -``` - - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. - -### DeltaSplit75 V2 -The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code make ProtoSplit-ProtoSplit instead - -Features --------- - -For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). - -Some features supported by the firmware: - -* Either half can connect to the computer via USB, or both halves can be used - independently. -* 75% formfactor -* Support for multiple Bottom Rows -* RGB underglow support -* Split Backspace and ISO support - - -Flashing -------- -I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too - - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) - -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. - -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. - - -Notes on Using Pro Micro 3.3V ------------------------------ - -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. - -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: - -``` -// _delay_us(30); // without this wait read unstable value. -_delay_us(300); // without this wait read unstable value. -``` diff --git a/keyboards/DeltaSplit75/rules.mk b/keyboards/DeltaSplit75/rules.mk deleted file mode 100644 index 0efa785505..0000000000 --- a/keyboards/DeltaSplit75/rules.mk +++ /dev/null @@ -1,87 +0,0 @@ -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -SUBPROJECT_rev1 ?= yes -USE_I2C ?= yes -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes - -avrdude: build - ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro now"; \ - while [[ -z $$USB ]]; do \ - sleep 1; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ - done; \ - avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex - -.PHONY: avrdude diff --git a/keyboards/DeltaSplit75/serial.c b/keyboards/DeltaSplit75/serial.c deleted file mode 100644 index 6faed09ce0..0000000000 --- a/keyboards/DeltaSplit75/serial.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef USE_SERIAL - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/DeltaSplit75/serial.h b/keyboards/DeltaSplit75/serial.h deleted file mode 100644 index 6ef52019a8..0000000000 --- a/keyboards/DeltaSplit75/serial.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include "config.h" -#include <stdbool.h> - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH ((MATRIX_COLS+7)/8 *MATRIX_ROWS/2) -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/DeltaSplit75/split_util.c b/keyboards/DeltaSplit75/split_util.c deleted file mode 100644 index 226dc18816..0000000000 --- a/keyboards/DeltaSplit75/split_util.c +++ /dev/null @@ -1,81 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated use MASTER_RIGHT instead since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -void keyboard_slave_loop(void) { - matrix_init(); - - while (1) { - matrix_slave_scan(); - } -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); - - if (!has_usb()) { - keyboard_slave_loop(); - } -} diff --git a/keyboards/DeltaSplit75/split_util.h b/keyboards/DeltaSplit75/split_util.h deleted file mode 100644 index 6b896679ca..0000000000 --- a/keyboards/DeltaSplit75/split_util.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include <stdbool.h> - -#ifdef EE_HANDS - #define EECONFIG_BOOTMAGIC_END (uint8_t *)10 - #define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END -#endif - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -#endif |