diff options
23 files changed, 670 insertions, 37 deletions
diff --git a/keyboards/s7_elephant/readme.md b/keyboards/s7_elephant/readme.md index 466e3f7316..76838be218 100644 --- a/keyboards/s7_elephant/readme.md +++ b/keyboards/s7_elephant/readme.md @@ -4,13 +4,16 @@ A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. -Keyboard Maintainer: QMK Community -Hardware Supported: S7 Elephant -Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) +**Firmware files are SPECIFIC to each revision. Firmware files from rev1 will not work on rev2 and vice versa.** Please use the `.hex` appropriate for your board. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: S7 Elephant rev1, rev2 +* Hardware Availability: [The GB has had 2 rounds with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) Make example for this keyboard (after setting up your build environment): - make s7_elephant:default:dfu + make s7_elephant/rev1:default # 2018 run + make s7_elephant/rev2:default # 2019 run To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. diff --git a/keyboards/s7_elephant/config.h b/keyboards/s7_elephant/rev1/config.h index c4f57178d8..d2770d117b 100644 --- a/keyboards/s7_elephant/config.h +++ b/keyboards/s7_elephant/rev1/config.h @@ -3,7 +3,7 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED +#define VENDOR_ID 0xA13B // Hexidecimal A13B will be Jacky's vendor ID #define PRODUCT_ID 0x0007 #define DEVICE_VER 0x0001 #define MANUFACTURER jacky @@ -22,9 +22,6 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -40,3 +37,12 @@ #define RGBLIGHT_VAL_STEP 8 #define RGBLIGHT_SLEEP #endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/s7_elephant/info.json b/keyboards/s7_elephant/rev1/info.json index 3d45f0b094..3d45f0b094 100644 --- a/keyboards/s7_elephant/info.json +++ b/keyboards/s7_elephant/rev1/info.json diff --git a/keyboards/s7_elephant/keymaps/default/config.h b/keyboards/s7_elephant/rev1/keymaps/default/config.h index 85f62371e9..85f62371e9 100644 --- a/keyboards/s7_elephant/keymaps/default/config.h +++ b/keyboards/s7_elephant/rev1/keymaps/default/config.h diff --git a/keyboards/s7_elephant/keymaps/default/keymap.c b/keyboards/s7_elephant/rev1/keymaps/default/keymap.c index 339f2d379c..339f2d379c 100644 --- a/keyboards/s7_elephant/keymaps/default/keymap.c +++ b/keyboards/s7_elephant/rev1/keymaps/default/keymap.c diff --git a/keyboards/s7_elephant/keymaps/default/readme.md b/keyboards/s7_elephant/rev1/keymaps/default/readme.md index c4fe30acdd..c4fe30acdd 100644 --- a/keyboards/s7_elephant/keymaps/default/readme.md +++ b/keyboards/s7_elephant/rev1/keymaps/default/readme.md diff --git a/keyboards/s7_elephant/rev1/readme.md b/keyboards/s7_elephant/rev1/readme.md new file mode 100644 index 0000000000..702be4c3a7 --- /dev/null +++ b/keyboards/s7_elephant/rev1/readme.md @@ -0,0 +1,17 @@ +# S7 Elephant + + + +A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: S7 Elephant +* Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) + +Make example for this keyboard (after setting up your build environment): + + make s7_elephant/rev1:default + +To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/s7_elephant/rev1/rev1.c b/keyboards/s7_elephant/rev1/rev1.c new file mode 100644 index 0000000000..520a869e57 --- /dev/null +++ b/keyboards/s7_elephant/rev1/rev1.c @@ -0,0 +1 @@ +#include "rev1.h" diff --git a/keyboards/s7_elephant/s7_elephant.h b/keyboards/s7_elephant/rev1/rev1.h index c351ffdb91..958ba0fae0 100644 --- a/keyboards/s7_elephant/s7_elephant.h +++ b/keyboards/s7_elephant/rev1/rev1.h @@ -1,5 +1,4 @@ -#ifndef S7_ELEPHANT_H -#define S7_ELEPHANT_H +#pragma once #include "quantum.h" @@ -852,4 +851,3 @@ K400, K401, K402, K403, K407, K410, K4 { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315 }, \ { K400, K401, K402, K403, ____, ____, ____, K407, ____, ____, K410, ____, ____, K413, K414, K415 } \ } -#endif diff --git a/keyboards/s7_elephant/rev1/rules.mk b/keyboards/s7_elephant/rev1/rules.mk new file mode 100644 index 0000000000..91fe85c3df --- /dev/null +++ b/keyboards/s7_elephant/rev1/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality diff --git a/keyboards/s7_elephant/rev2/config.h b/keyboards/s7_elephant/rev2/config.h new file mode 100644 index 0000000000..5c5b526aa7 --- /dev/null +++ b/keyboards/s7_elephant/rev2/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2020 MudkipMao + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA13B // Hexidecimal A13B will be Jacky's vendor ID +#define PRODUCT_ID 0x0008 // 8 for S7++ +#define DEVICE_VER 0x0002 +#define MANUFACTURER Jacky +#define PRODUCT Jacky S7 Elephant Rev 2 +#define DESCRIPTION A high-end 70% custom keyboard + +/* Don't remove this without also removing LTO_ENABLE=yes in rules.mk */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + * + * 0 1 2 3 4 5 6 7 8 9 A B C D E F */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0, E6 } + +/* Setting the matrix value of top left key for bootmagic lite */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 15 + +#define DIODE_DIRECTION ROW2COL + +#define BACKLIGHT_PIN B6 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 15 + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 2 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#endif // RGB_DI_PIN + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/s7_elephant/rev2/info.json b/keyboards/s7_elephant/rev2/info.json new file mode 100644 index 0000000000..5c811cd47d --- /dev/null +++ b/keyboards/s7_elephant/rev2/info.json @@ -0,0 +1,167 @@ +{ + "keyboard_name": "S7 Elephant Rev2", + "url": "https://geekhack.org/index.php?topic=103148.0", + "maintainer": "qmk", + "width": 17.25, + "height": 5, + "layouts": { + "LAYOUT_all": { + "key_count": 75, + "layout": [ + {"label":"K0F (B0,E6)", "x":0, "y":0}, + {"label":"K00 (B0,D0)", "x":1.25, "y":0}, + {"label":"K01 (B0,D1)", "x":2.25, "y":0}, + {"label":"K02 (B0,D2)", "x":3.25, "y":0}, + {"label":"K03 (B0,D3)", "x":4.25, "y":0}, + {"label":"K04 (B0,D5)", "x":5.25, "y":0}, + {"label":"K05 (B0,D4)", "x":6.25, "y":0}, + {"label":"K06 (B0,D6)", "x":7.25, "y":0}, + {"label":"K07 (B0,D7)", "x":8.25, "y":0}, + {"label":"K08 (B0,B4)", "x":9.25, "y":0}, + {"label":"K09 (B0,F7)", "x":10.25, "y":0}, + {"label":"K0A (B0,F6)", "x":11.25, "y":0}, + {"label":"K0B (B0,F5)", "x":12.25, "y":0}, + {"label":"K0C (B0,F4)", "x":13.25, "y":0}, + {"label":"K0D (B0,F1)", "x":14.25, "y":0}, + {"label":"K0E (B0,F0)", "x":15.25, "y":0}, + {"label":"K4E (B7,F0)", "x":16.25, "y":0}, + {"label":"K1F (B1,E6)", "x":0, "y":1}, + {"label":"K10 (B1,D0)", "x":1.25, "y":1, "w":1.5}, + {"label":"K11 (B1,D1)", "x":2.75, "y":1}, + {"label":"K12 (B1,D2)", "x":3.75, "y":1}, + {"label":"K13 (B1,D3)", "x":4.75, "y":1}, + {"label":"K14 (B1,D5)", "x":5.75, "y":1}, + {"label":"K15 (B1,D4)", "x":6.75, "y":1}, + {"label":"K16 (B1,D6)", "x":7.75, "y":1}, + {"label":"K17 (B1,D7)", "x":8.75, "y":1}, + {"label":"K18 (B1,B4)", "x":9.75, "y":1}, + {"label":"K19 (B1,F7)", "x":10.75, "y":1}, + {"label":"K1A (B1,F6)", "x":11.75, "y":1}, + {"label":"K1B (B1,F5)", "x":12.75, "y":1}, + {"label":"K1C (B1,F4)", "x":13.75, "y":1}, + {"label":"K2C (B2,F4)", "x":14.75, "y":1, "w":1.5}, + {"label":"K1E (B1,F0)", "x":16.25, "y":1}, + {"label":"K2F (B2,E6)", "x":0, "y":2}, + {"label":"K20 (B2,D0)", "x":1.25, "y":2, "w":1.75}, + {"label":"K21 (B2,D1)", "x":3, "y":2}, + {"label":"K22 (B2,D2)", "x":4, "y":2}, + {"label":"K23 (B2,D3)", "x":5, "y":2}, + {"label":"K24 (B2,D5)", "x":6, "y":2}, + {"label":"K25 (B2,D4)", "x":7, "y":2}, + {"label":"K26 (B2,D6)", "x":8, "y":2}, + {"label":"K27 (B2,D7)", "x":9, "y":2}, + {"label":"K28 (B2,B4)", "x":10, "y":2}, + {"label":"K29 (B2,F7)", "x":11, "y":2}, + {"label":"K2A (B2,F6)", "x":12, "y":2}, + {"label":"K2B (B2,F5)", "x":13, "y":2}, + {"label":"K1D (B1,F1)", "x":14, "y":2, "w":2.25}, + {"label":"K2E (B2,F0)", "x":16.25, "y":2}, + {"label":"K3F (B3,E6)", "x":0, "y":3}, + {"label":"K30 (B3,D0)", "x":1.25, "y":3, "w":1.25}, + {"label":"K31 (B3,D1)", "x":2.5, "y":3}, + {"label":"K32 (B3,D2)", "x":3.5, "y":3}, + {"label":"K33 (B3,D3)", "x":4.5, "y":3}, + {"label":"K34 (B3,D5)", "x":5.5, "y":3}, + {"label":"K35 (B3,D4)", "x":6.5, "y":3}, + {"label":"K36 (B3,D6)", "x":7.5, "y":3}, + {"label":"K37 (B3,D7)", "x":8.5, "y":3}, + {"label":"K38 (B3,B4)", "x":9.5, "y":3}, + {"label":"K39 (B3,F7)", "x":10.5, "y":3}, + {"label":"K3A (B3,F6)", "x":11.5, "y":3}, + {"label":"K3B (B3,F5)", "x":12.5, "y":3}, + {"label":"K3C (B3,F4)", "x":13.5, "y":3, "w":1.75}, + {"label":"K3D (B3,F1)", "x":15.25, "y":3}, + {"label":"K3E (B3,F0)", "x":16.25, "y":3}, + {"label":"K4F (B7,E6)", "x":0, "y":4}, + {"label":"K40 (B7,D0)", "x":1.25, "y":4, "w":1.25}, + {"label":"K41 (B7,D1)", "x":2.5, "y":4, "w":1.25}, + {"label":"K42 (B7,D2)", "x":3.75, "y":4, "w":1.25}, + {"label":"K46 (B7,D6)", "x":5, "y":4, "w":6.25}, + {"label":"K48 (B7,B4)", "x":11.25, "y":4}, + {"label":"K49 (B7,F7)", "x":12.25, "y":4}, + {"label":"K4A (B7,F6)", "x":13.25, "y":4}, + {"label":"K4B (B7,F5)", "x":14.25, "y":4}, + {"label":"K4C (B7,F4)", "x":15.25, "y":4}, + {"label":"K4D (B7,F1)", "x":16.25, "y":4} + ] + }, + "LAYOUT_ansi_1u": { + "key_count": 73, + "layout": [ + {"label":"K0F", "x":0, "y":0}, + {"label":"K00", "x":1.25, "y":0}, + {"label":"K01", "x":2.25, "y":0}, + {"label":"K02", "x":3.25, "y":0}, + {"label":"K03", "x":4.25, "y":0}, + {"label":"K04", "x":5.25, "y":0}, + {"label":"K05", "x":6.25, "y":0}, + {"label":"K06", "x":7.25, "y":0}, + {"label":"K07", "x":8.25, "y":0}, + {"label":"K08", "x":9.25, "y":0}, + {"label":"K09", "x":10.25, "y":0}, + {"label":"K0A", "x":11.25, "y":0}, + {"label":"K0B", "x":12.25, "y":0}, + {"label":"K0C", "x":13.25, "y":0}, + {"label":"K0E", "x":14.25, "y":0, "w":2}, + {"label":"K4E", "x":16.25, "y":0}, + {"label":"K1F", "x":0, "y":1}, + {"label":"K10", "x":1.25, "y":1, "w":1.5}, + {"label":"K11", "x":2.75, "y":1}, + {"label":"K12", "x":3.75, "y":1}, + {"label":"K13", "x":4.75, "y":1}, + {"label":"K14", "x":5.75, "y":1}, + {"label":"K15", "x":6.75, "y":1}, + {"label":"K16", "x":7.75, "y":1}, + {"label":"K17", "x":8.75, "y":1}, + {"label":"K18", "x":9.75, "y":1}, + {"label":"K19", "x":10.75, "y":1}, + {"label":"K1A", "x":11.75, "y":1}, + {"label":"K1B", "x":12.75, "y":1}, + {"label":"K1C", "x":13.75, "y":1}, + {"label":"K2C", "x":14.75, "y":1, "w":1.5}, + {"label":"K1E", "x":16.25, "y":1}, + {"label":"K2F", "x":0, "y":2}, + {"label":"K20", "x":1.25, "y":2, "w":1.75}, + {"label":"K21", "x":3, "y":2}, + {"label":"K22", "x":4, "y":2}, + {"label":"K23", "x":5, "y":2}, + {"label":"K24", "x":6, "y":2}, + {"label":"K25", "x":7, "y":2}, + {"label":"K26", "x":8, "y":2}, + {"label":"K27", "x":9, "y":2}, + {"label":"K28", "x":10, "y":2}, + {"label":"K29", "x":11, "y":2}, + {"label":"K2A", "x":12, "y":2}, + {"label":"K2B", "x":13, "y":2}, + {"label":"K1D", "x":14, "y":2, "w":2.25}, + {"label":"K2E", "x":16.25, "y":2}, + {"label":"K3F", "x":0, "y":3}, + {"label":"K30", "x":1.25, "y":3, "w":2.25}, + {"label":"K32", "x":3.5, "y":3}, + {"label":"K33", "x":4.5, "y":3}, + {"label":"K34", "x":5.5, "y":3}, + {"label":"K35", "x":6.5, "y":3}, + {"label":"K36", "x":7.5, "y":3}, + {"label":"K37", "x":8.5, "y":3}, + {"label":"K38", "x":9.5, "y":3}, + {"label":"K39", "x":10.5, "y":3}, + {"label":"K3A", "x":11.5, "y":3}, + {"label":"K3B", "x":12.5, "y":3}, + {"label":"K3C", "x":13.5, "y":3, "w":1.75}, + {"label":"K3D", "x":15.25, "y":3}, + {"label":"K3E", "x":16.25, "y":3}, + {"label":"K4F", "x":0, "y":4}, + {"label":"K40", "x":1.25, "y":4, "w":1.25}, + {"label":"K41", "x":2.5, "y":4, "w":1.25}, + {"label":"K42", "x":3.75, "y":4, "w":1.25}, + {"label":"K46", "x":5, "y":4, "w":6.25}, + {"label":"K48", "x":11.25, "y":4}, + {"label":"K49", "x":12.25, "y":4}, + {"label":"K4A", "x":13.25, "y":4}, + {"label":"K4B", "x":14.25, "y":4}, + {"label":"K4C", "x":15.25, "y":4}, + {"label":"K4D", "x":16.25, "y":4} + ] + } + } +} diff --git a/keyboards/s7_elephant/rev2/keymaps/default/keymap.c b/keyboards/s7_elephant/rev2/keymaps/default/keymap.c new file mode 100644 index 0000000000..b1fbd3830d --- /dev/null +++ b/keyboards/s7_elephant/rev2/keymaps/default/keymap.c @@ -0,0 +1,65 @@ +#include QMK_KEYBOARD_H + +enum custom_layers { + _QWERTY, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,------. ,-------------------------------------------------------------------------------------------------. + * | F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Ins | + * |------| |-------------------------------------------------------------------------------------------------| + * | F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Del | + * |------| |-------------------------------------------------------------------------------------------------| + * | F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Home| + * |------| |-------------------------------------------------------------------------------------------------| + * | F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | End | + * |------| |-------------------------------------------------------------------------------------------------| + * | F5 | | Ctrl | Gui | Alt | Space | RAlt | FN | RCtrl | L | D | R | + * `------' `-------------------------------------------------------------------------------------------------' + */ + + [_QWERTY] = LAYOUT_ansi_1u( + KC_F1, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F3, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_F5, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + +/* FN + * ,------. ,-------------------------------------------------------------------------------------------------. + * |Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | |PgDn | + * |------| |-------------------------------------------------------------------------------------------------| + * |EEPRST| | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + + [_FN] = LAYOUT_ansi_1u( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, + EEP_RST, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + +bool led_update_user(led_t led_state) { + // Turn LEDs On/Off for Caps Lock + if (led_state.caps_lock) { + rgblight_enable_noeeprom(); + rgblight_sethsv_noeeprom(0, 0, 80); + } else { + rgblight_sethsv_noeeprom(0, 0, 80); + rgblight_disable_noeeprom(); + } + return false; +} diff --git a/keyboards/s7_elephant/rev2/keymaps/default/readme.md b/keyboards/s7_elephant/rev2/keymaps/default/readme.md new file mode 100644 index 0000000000..c4fe30acdd --- /dev/null +++ b/keyboards/s7_elephant/rev2/keymaps/default/readme.md @@ -0,0 +1,35 @@ +# Default keymap for S7 Elephant + +**Features** + +* LEDs are functioning as Caps-Lock indicators + +## QWERTY (Normal) Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +| F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | +|------| |-------------------------------------------------------------------------------------------------| +| F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | +|------| |-------------------------------------------------------------------------------------------------| +| F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | +|------| |-------------------------------------------------------------------------------------------------| +| F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | +|------| |-------------------------------------------------------------------------------------------------| +| F5 | | Ctrl | Gui | Alt | Space | FN | RAlt | RCtrl | L | D | R | +`------' `-------------------------------------------------------------------------------------------------' +``` + +## FN Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +|Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | | | | +|------| |-------------------------------------------------------------------------------------------------| +| | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | |PgDn | +|------| |-------------------------------------------------------------------------------------------------| +|EPRM | | | | | | | | | | | | +`------' `-------------------------------------------------------------------------------------------------' +``` diff --git a/keyboards/s7_elephant/rev2/keymaps/via/keymap.c b/keyboards/s7_elephant/rev2/keymaps/via/keymap.c new file mode 100644 index 0000000000..b81777b12a --- /dev/null +++ b/keyboards/s7_elephant/rev2/keymaps/via/keymap.c @@ -0,0 +1,92 @@ +#include QMK_KEYBOARD_H + +// For readability +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Default layer + * ,------. ,-------------------------------------------------------------------------------------------------. + * | F1 | | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | Ins | + * |------| |-------------------------------------------------------------------------------------------------| + * | F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | Del | + * |------| |-------------------------------------------------------------------------------------------------| + * | F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter |Home | + * |------| |-------------------------------------------------------------------------------------------------| + * | F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | End | + * |------| |-------------------------------------------------------------------------------------------------| + * | F5 | | Ctrl | Gui | Alt | Space | RAlt | FN | RCtrl | L | D | R | + * `------' `-------------------------------------------------------------------------------------------------' + */ + [_BASE] = LAYOUT_ansi_1u( + KC_F1, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F3, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_F5, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Fn1 Layer + * ,------. ,-------------------------------------------------------------------------------------------------. + * | F6 | | `~ | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | F7 | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | F8 | | |VolD |VolU |Mute | | | | | | | | | |PgUp | + * |------| |-------------------------------------------------------------------------------------------------| + * | F9 | | |Prev |Play |Next | | | | | | | | | |PgDn | + * |------| |-------------------------------------------------------------------------------------------------| + * | F10 | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + [_FN1] = LAYOUT_ansi_1u( + KC_F6, KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F7, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F8, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, + KC_F9, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_F10, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Fn2 Layer + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + [_FN2] = LAYOUT_ansi_1u( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Fn3 Layer + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + [_FN3] = LAYOUT_ansi_1u( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; diff --git a/keyboards/s7_elephant/rev2/keymaps/via/readme.md b/keyboards/s7_elephant/rev2/keymaps/via/readme.md new file mode 100644 index 0000000000..c4fe30acdd --- /dev/null +++ b/keyboards/s7_elephant/rev2/keymaps/via/readme.md @@ -0,0 +1,35 @@ +# Default keymap for S7 Elephant + +**Features** + +* LEDs are functioning as Caps-Lock indicators + +## QWERTY (Normal) Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +| F1 | | Esc`~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc |Home | +|------| |-------------------------------------------------------------------------------------------------| +| F2 | | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | End | +|------| |-------------------------------------------------------------------------------------------------| +| F3 | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Enter | Ins | +|------| |-------------------------------------------------------------------------------------------------| +| F4 | | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | U | Del | +|------| |-------------------------------------------------------------------------------------------------| +| F5 | | Ctrl | Gui | Alt | Space | FN | RAlt | RCtrl | L | D | R | +`------' `-------------------------------------------------------------------------------------------------' +``` + +## FN Layer +``` +,------. ,-------------------------------------------------------------------------------------------------. +|Reset | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | PScr | ScrLck |Pause| +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | | | | +|------| |-------------------------------------------------------------------------------------------------| +| | | |Prev |Play |Next | | | | |VolD |Mute |VolU | | |PgUp | +|------| |-------------------------------------------------------------------------------------------------| +| | | | | | | | | | | | | | | |PgDn | +|------| |-------------------------------------------------------------------------------------------------| +|EPRM | | | | | | | | | | | | +`------' `-------------------------------------------------------------------------------------------------' +``` diff --git a/keyboards/s7_elephant/rev2/keymaps/via/rules.mk b/keyboards/s7_elephant/rev2/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/s7_elephant/rev2/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/s7_elephant/rev2/readme.md b/keyboards/s7_elephant/rev2/readme.md new file mode 100644 index 0000000000..04cbafd96f --- /dev/null +++ b/keyboards/s7_elephant/rev2/readme.md @@ -0,0 +1,17 @@ +# S7 Elephant + + + +A high-end 70% custom keyboard designed and produced by [jacky](https://geekhack.org/index.php?action=profile;u=63864) from Geekhack. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: S7 Elephant +* Hardware Availability: [The GB has ended with little chance to run again.](https://geekhack.org/index.php?topic=96434.0) + +Make example for this keyboard (after setting up your build environment): + + make s7_elephant/rev2:default + +To enter the bootloader, either short the pins on the PCB next to CAPSLOCK or the press the RESET button on the FN layer. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/s7_elephant/rev2/rev2.c b/keyboards/s7_elephant/rev2/rev2.c new file mode 100644 index 0000000000..3e84aedd52 --- /dev/null +++ b/keyboards/s7_elephant/rev2/rev2.c @@ -0,0 +1,19 @@ +/* Copyright 2020 MudkipMao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "rev2.h" + +// generated by KBFirmware JSON to QMK Parser +// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/s7_elephant/rev2/rev2.h b/keyboards/s7_elephant/rev2/rev2.h new file mode 100644 index 0000000000..16fe50aadb --- /dev/null +++ b/keyboards/s7_elephant/rev2/rev2.h @@ -0,0 +1,61 @@ +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + +/* ALL: This is an odd layout that the JSON file comes preloaded with. Split left-shift and ansi enter + * ,------. ,-------------------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |------| |-------------------------------------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `------' `-------------------------------------------------------------------------------------------------' + */ + +#define LAYOUT_all( \ + K0F, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \ + K1F, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ + K2F, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ + K3F, K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K4F, K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, ___, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ + { K40, K41, K42, ___, ___, ___, K46, ___, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F } \ +} + +/* ANSI + * ,---. ,---------------------------------------------------------------. + * | | | | | | | | | | | | | | | | | | + * |---| |---------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | | + * |---| |---------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |---| |---------------------------------------------------------------| + * | | | | | | | | | | | | | | | | | + * |---| |---------------------------------------------------------------| + * | | | | | | | | | | | | | + * `---' `---------------------------------------------------------------' + */ + +#define LAYOUT_ansi_1u( \ + K0F, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K4E, \ + K1F, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \ + K2F, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \ + K3F, K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K4F, K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, ___, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, ___, K2E, K2F }, \ + { K30, ___, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ + { K40, K41, K42, ___, ___, ___, K46, ___, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F } \ +} diff --git a/keyboards/s7_elephant/rev2/rules.mk b/keyboards/s7_elephant/rev2/rules.mk new file mode 100644 index 0000000000..cbf45a2b9b --- /dev/null +++ b/keyboards/s7_elephant/rev2/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +LTO_ENABLE = yes diff --git a/keyboards/s7_elephant/rules.mk b/keyboards/s7_elephant/rules.mk index 91fe85c3df..318b6ee209 100644 --- a/keyboards/s7_elephant/rules.mk +++ b/keyboards/s7_elephant/rules.mk @@ -1,25 +1 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# ATmega32A bootloadHID -# ATmega328P USBasp -BOOTLOADER = atmel-dfu - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality +DEFAULT_FOLDER = s7_elephant/rev1
\ No newline at end of file diff --git a/keyboards/s7_elephant/s7_elephant.c b/keyboards/s7_elephant/s7_elephant.c deleted file mode 100644 index a869f46dbe..0000000000 --- a/keyboards/s7_elephant/s7_elephant.c +++ /dev/null @@ -1 +0,0 @@ -#include "s7_elephant.h" |