diff options
| -rw-r--r-- | README.md | 1 | ||||
| -rw-r--r-- | keyboard/lightsaber/Makefile.lufa | 126 | ||||
| -rw-r--r-- | keyboard/lightsaber/Makefile.pjrc | 94 | ||||
| -rw-r--r-- | keyboard/lightsaber/README.md | 26 | ||||
| -rw-r--r-- | keyboard/lightsaber/backlight.c | 56 | ||||
| -rw-r--r-- | keyboard/lightsaber/config.h | 46 | ||||
| -rw-r--r-- | keyboard/lightsaber/keymap.c | 77 | ||||
| -rw-r--r-- | keyboard/lightsaber/keymap_winkey.h | 21 | ||||
| -rw-r--r-- | keyboard/lightsaber/led.c | 54 | ||||
| -rw-r--r-- | keyboard/lightsaber/matrix.c | 292 |
10 files changed, 793 insertions, 0 deletions
@@ -52,6 +52,7 @@ You can find some keyboard specific projects under `converter` and `keyboard` di * [IIgs_Standard](keyboard/IIgs/) - Apple [IIGS] keyboard mod(by JeffreySung) * [macway](keyboard/macway/) - [Compact keyboard mod][GH_macway] [retired] * [KMAC](keyboard/kmac/) - Korean custom keyboard +* [Lightsaber](keyboard/lightsaber/) - Korean custom keyboard [GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930 [GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047 diff --git a/keyboard/lightsaber/Makefile.lufa b/keyboard/lightsaber/Makefile.lufa new file mode 100644 index 0000000000..b430efd229 --- /dev/null +++ b/keyboard/lightsaber/Makefile.lufa @@ -0,0 +1,126 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = lightsaber_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + + +# List C source files here. (C dependencies are automatically generated.) +SRC = keymap.c \ + matrix.c \ + led.c \ + backlight.c + +CONFIG_H = config.h + + +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 8000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +winkey: OPT_DEFS += -DLAYOUT_WINKEY +winkey: all diff --git a/keyboard/lightsaber/Makefile.pjrc b/keyboard/lightsaber/Makefile.pjrc new file mode 100644 index 0000000000..58735a7ef0 --- /dev/null +++ b/keyboard/lightsaber/Makefile.pjrc @@ -0,0 +1,94 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = lightsaber_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = keymap.c \ + matrix.c \ + led.c \ + backlight.c + +CONFIG_H = config.h + + +# MCU name +MCU = atmega32u4 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 8000000 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +#MOUSEKEY_ENABLE = yes # Mouse keys(+5000) +EXTRAKEY_ENABLE = yes # Audio control and System control(+600) +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover(+500) +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +winkey: OPT_DEFS += -DLAYOUT_WINKEY +winkey: all diff --git a/keyboard/lightsaber/README.md b/keyboard/lightsaber/README.md new file mode 100644 index 0000000000..9dcd693095 --- /dev/null +++ b/keyboard/lightsaber/README.md @@ -0,0 +1,26 @@ +Lightsaber keyboard firmware +====================== +Korean custom keyboard designed by Duck. + +*Note that this is not the official firmware* + +Supported models +---------------- +All pcb options are supported. + + +Build +----- +Move to this directory then just run `make` like: + + $ make -f Makefile.[pjrc|lufa] + +Use `Makefile.pjrc` if you want to use PJRC stack or use `Makefile.lufa` for LUFA stack. + + +Bootloader +--------- +The PCB is hardwired to run the bootloader if the key at the `one above backspace` position is held down when connecting the keyboard. + +It is still possible to use Boot Magic and Command to access the bootloader though. + diff --git a/keyboard/lightsaber/backlight.c b/keyboard/lightsaber/backlight.c new file mode 100644 index 0000000000..b28200807c --- /dev/null +++ b/keyboard/lightsaber/backlight.c @@ -0,0 +1,56 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "backlight.h" + +/* Backlight pin configuration + * + * Alphas PB1 (high) + * Numeric PB2 (high) + * Mod+Num PB3 (high) + * Backside PD6 (high) + * TopRight PD7 (low) + * F-Row PE6 (high) + * + */ +void backlight_set(uint8_t level) +{ + // Set as output. + DDRB |= (1<<1) | (1<<2) | (1<<3); + DDRD |= (1<<6) | (1<<7); + DDRE |= (1<<6); + + if(level & (1<<0)) + { + PORTB &= ~(1<<1); + PORTB &= ~(1<<2); + PORTB &= ~(1<<3); + PORTD &= ~(1<<6); + PORTD |= (1<<7); + PORTE &= ~(1<<6); + } + else + { + PORTB |= (1<<1); + PORTB |= (1<<2); + PORTB |= (1<<3); + PORTD |= (1<<6); + PORTD &= ~(1<<7); + PORTE |= (1<<6); + } +} diff --git a/keyboard/lightsaber/config.h b/keyboard/lightsaber/config.h new file mode 100644 index 0000000000..d971d038e3 --- /dev/null +++ b/keyboard/lightsaber/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2013 Mathias Andersson <wraul@dbox.se> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6050 +#define DEVICE_VER 0x0104 +#define MANUFACTURER Duck +#define PRODUCT Lightsaber + +/* message strings */ +#define DESCRIPTION t.m.k. keyboard firmware for Lightsaber + +/* matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 18 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 1 + +/* Set 0 if need no debouncing */ +#define DEBOUNCE 5 + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#endif diff --git a/keyboard/lightsaber/keymap.c b/keyboard/lightsaber/keymap.c new file mode 100644 index 0000000000..398e51ec4a --- /dev/null +++ b/keyboard/lightsaber/keymap.c @@ -0,0 +1,77 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * Keymap for Lightsaber controller + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "debug.h" +#include "keymap.h" + +// Convert physical keyboard layout to matrix array. +// This is a macro to define keymap easily in keyboard layout form. +#define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{ \ +/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 */ \ +/* 5 */ { KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F, KC_##K5G, KC_##K5H, KC_##K5I, KC_##K5J, KC_##K5K, KC_##K5L, KC_##K5M, KC_##K5N, KC_##K5O, KC_##K5P, KC_##K5Q, KC_##K5R}, \ +/* 4 */ { KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F, KC_##K4G, KC_##K4H, KC_##K4I, KC_##K4J, KC_##K4K, KC_##K4L, KC_##K4M, KC_##K4N, KC_##K4O, KC_##K4P, KC_##K4Q, KC_##K4R}, \ +/* 3 */ { KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F, KC_##K3G, KC_##K3H, KC_##K3I, KC_##K3J, KC_##K3K, KC_##K3L, KC_##K3M, KC_##K3N, KC_##K3O, KC_##K3P, KC_##K3Q, KC_##K3R}, \ +/* 2 */ { KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F, KC_##K2G, KC_##K2H, KC_##K2I, KC_##K2J, KC_##K2K, KC_##K2L, KC_##K2M, KC_##K2N, KC_##K2O, KC_##K2P, KC_##K2Q, KC_##K2R}, \ +/* 1 */ { KC_##K1A, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F, KC_##K1G, KC_##K1H, KC_##K1I, KC_##K1J, KC_##K1K, KC_##K1L, KC_NO, KC_##K1M, KC_##K1N, KC_##K1O, KC_##K1P, KC_##K1Q, KC_##K1R}, \ +/* 0 */ { KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_NO, KC_##K0G, KC_NO, KC_NO, KC_##K0K, KC_NO, KC_##K0L, KC_NO, KC_##K0M, KC_##K0N, KC_##K0O, KC_##K0P, KC_##K0Q, KC_##K0R} \ +} + +#include "keymap_winkey.h" + +#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0])) +#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0])) + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) +{ + if (layer < KEYMAPS_SIZE) { + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); + } else { + // fall back to layer 0 + return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]); + } +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + action_t action; + if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) { + action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); + } else { + action.code = ACTION_NO; + } + return action; +} diff --git a/keyboard/lightsaber/keymap_winkey.h b/keyboard/lightsaber/keymap_winkey.h new file mode 100644 index 0000000000..59ffd4a8fc --- /dev/null +++ b/keyboard/lightsaber/keymap_winkey.h @@ -0,0 +1,21 @@ +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP(\ + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, INS, PSCR, SLCK, BRK, \ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NUMLOCK,KP_SLASH,KP_ASTERISK,KP_MINUS, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, KP_7, KP_8, KP_9, KP_PLUS, \ + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,FN0, ENT, KP_4, KP_5, KP_6, NO, \ + LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,NO, RSFT, KP_1, KP_2, KP_3, KP_ENTER, \ + LCTL,LGUI,LALT, SPC, NO, RALT,RGUI,RCTL, KP_0, NO, KP_DOT, NO), \ + KEYMAP(\ + CALC,MYCM,WSCH,WHOM,MAIL,MUTE,VOLD,VOLU,MSEL,MSTP,MPLY,MPRV,MNXT,TRNS, TRNS, WAKE, PWR, SLEP, \ + TRNS,TRNS,TRNS,TRNS,END ,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS,TRNS,TRNS,TRNS,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS, TRNS,TRNS,TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, \ + TRNS,TRNS,TRNS, FN1, TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS, TRNS) +}; + +static const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_BACKLIGHT_STEP() +}; diff --git a/keyboard/lightsaber/led.c b/keyboard/lightsaber/led.c new file mode 100644 index 0000000000..c3f85427f5 --- /dev/null +++ b/keyboard/lightsaber/led.c @@ -0,0 +1,54 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + +/* LED pin configuration + * + * Caps PB0 (low) + * NumLock PB4 (low) + * + */ +void led_set(uint8_t usb_led) +{ + // Set as output. + DDRB |= (1<<0) | (1<<4); + + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + { + // Output low. + PORTB &= ~(1<<0); + } + else + { + // Output high. + PORTB |= (1<<0); + } + + if (usb_led & (1<<USB_LED_NUM_LOCK)) + { + // Output low. + PORTB &= ~(1<<4); + } + else + { + // Output high. + PORTB |= (1<<4); + } +} diff --git a/keyboard/lightsaber/matrix.c b/keyboard/lightsaber/matrix.c new file mode 100644 index 0000000000..e3eca84df8 --- /dev/null +++ b/keyboard/lightsaber/matrix.c @@ -0,0 +1,292 @@ +/* +Copyright 2014 Ralf Schmitt <ralf@bunkertor.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 0 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static uint8_t read_rows(void); +static uint8_t read_fwkey(void); +static void init_rows(void); +static void unselect_cols(void); +static void select_col(uint8_t col); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + unselect_cols(); + init_rows(); + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } +} + +uint8_t matrix_scan(void) +{ + for (uint8_t col = 0; col < MATRIX_COLS; col++) { // 0-17 + select_col(col); + _delay_us(3); // TODO: Determine the correct value needed here. + uint8_t rows = read_rows(); + // Use the otherwise unused col: 12 row: 3 for firmware. + if(col == 12) { + rows |= read_fwkey(); + } + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { // 0-5 + bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); + bool curr_bit = rows & (1<<row); + if (prev_bit != curr_bit) { + matrix_debouncing[row] ^= ((matrix_row_t)1<<col); + if (debouncing) { + dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); + } + debouncing = DEBOUNCE; + } + } + unselect_cols(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row))); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop32(matrix[i]); + } + return count; +} + +/* Row pin configuration + * row: 0 1 2 3 4 5 + * pin: PD0 PD1 PD2 PD3 PD5 PB7 + * + * Firmware uses its own pin PE2 + */ +static void init_rows(void) +{ + // Input (DDR:0, PORT:0) + DDRD &= ~0b00101111; + PORTD &= ~0b00101111; + DDRB &= ~(1<<7); + PORTB &= ~(1<<7); + + // Input with pull-up (DDR:0, PORT:1) + DDRE &= ~(1<<2); + PORTE |= (1<<2); +} + +static uint8_t read_rows(void) +{ + return (PIND&(1<<0) ? (1<<0) : 0) | + (PIND&(1<<1) ? (1<<1) : 0) | + (PIND&(1<<2) ? (1<<2) : 0) | + (PIND&(1<<3) ? (1<<3) : 0) | + (PIND&(1<<5) ? (1<<4) : 0) | + (PINB&(1<<7) ? (1<<5) : 0); +} + +static uint8_t read_fwkey(void) +{ + return PINE&(1<<2) ? 0 : (1<<3); +} + +/* Columns 0 - 15 + * These columns uses two 74HC237D 3 to 8 bit demultiplexers. + * col / pin: PC6 PB6 PF0 PF1 PC7 + * 0: 1 0 0 0 0 + * 1: 1 0 1 0 0 + * 2: 1 0 0 1 0 + * 3: 1 0 1 1 0 + * 4: 1 0 0 0 1 + * 5: 1 0 1 0 1 + * 6: 1 0 0 1 1 + * 7: 1 0 1 1 1 + * 8: 0 1 0 0 0 + * 9: 0 1 1 0 0 + * 10: 0 1 0 1 0 + * 11: 0 1 1 1 0 + * 12: 0 1 0 0 1 + * 13: 0 1 1 0 1 + * 14: 0 1 0 1 1 + * 15: 0 1 1 1 1 + * + * col: 16 + * pin: PB5 + * + * col: 17 + * pin: PD4 + */ +static void unselect_cols(void) +{ + DDRB |= (1<<5) | (1<<6); + PORTB &= ~((1<<5) | (1<<6)); + + DDRC |= (1<<6) | (1<<7); + PORTC &= ~((1<<6) | (1<<7)); + + DDRD |= (1<<4); + PORTD &= ~(1<<4); + + DDRF |= (1<<0) | (1<<1); + PORTF &= ~((1<<0) | (1<<1)); +} + +static void select_col(uint8_t col) +{ + // Output high (DDR:1, PORT:1) to select + switch (col) { + case 0: + PORTC |= (1<<6); + break; + case 1: + PORTC |= (1<<6); + PORTF |= (1<<0); + break; + case 2: + PORTC |= (1<<6); + PORTF |= (1<<1); + break; + case 3: + PORTC |= (1<<6); + PORTF |= (1<<0) | (1<<1); + break; + case 4: + PORTC |= (1<<6); + PORTC |= (1<<7); + break; + case 5: + PORTC |= (1<<6); + PORTF |= (1<<0); + PORTC |= (1<<7); + break; + case 6: + PORTC |= (1<<6); + PORTF |= (1<<1); + PORTC |= (1<<7); + break; + case 7: + PORTC |= (1<<6); + PORTF |= (1<<0) | (1<<1); + PORTC |= (1<<7); + break; + case 8: + PORTB |= (1<<6); + break; + case 9: + PORTB |= (1<<6); + PORTF |= (1<<0); + break; + case 10: + PORTB |= (1<<6); + PORTF |= (1<<1); + break; + case 11: + PORTB |= (1<<6); + PORTF |= (1<<0) | (1<<1); + break; + case 12: + PORTB |= (1<<6); + PORTC |= (1<<7); + break; + case 13: + PORTB |= (1<<6); + PORTF |= (1<<0); + PORTC |= (1<<7); + break; + case 14: + PORTB |= (1<<6); + PORTF |= (1<<1); + PORTC |= (1<<7); + break; + case 15: + PORTB |= (1<<6); + PORTF |= (1<<0) | (1<<1); + PORTC |= (1<<7); + break; + case 16: + PORTB |= (1<<5); + break; + case 17: + PORTD |= (1<<4); + break; + } +} |