Merge remote-tracking branch 'origin/master' into develop

1 files changed, 18 insertions, 0 deletions

diff --git a/users/drashna/keyrecords/keycodes.md b/users/drashna/keyrecords/keycodes.md
new file mode 100644
index 0000000000..348c68e46c
--- /dev/null
+++ b/users/drashna/keyrecords/keycodes.md
@@ -0,0 +1,18 @@
+
+# Custom Keycodes
+
+Keycodes are defined in the `process_record.h` file and need to be included in the keymap.c files, so that they can be used there. 
+
+A bunch of macros are present and are only included on boards that are not the Ergodox EZ or Orthodox, as they are not needed for those boards. 
+
+* `KC_MAKE` - outputs `qmk compile -kb (keyboard) -km (keymap)` and enter, to start compiling the currenct keyboard.  This uses generated variables to always use the current keyboard and keymap.  Will work with any keyboard and any keymap.
+  * If you are holding shift, it will use `qmk flash` instead of `qmk compile`.
+  * If `MAKE_BOOTLOADER` is defined, it will always use `qmk flash` instead of `qmk compile`.
+* `DEFAULT_LAYER_1` ... `DEFAULT_LAYER_4` - This sets layer 0-3 as the default layer, and writes that to eeprom, and plays a chime. 
+* `VRSN`, outputs the keyboard, keymap, commit and date info.  Eg:
+  * `handwired/tractyl_manuform/5x6_right/f411/drashna @ 0.15.9-162-g087d08, Built on: 2021-12-19-21:10:26`
+*  `KC_DIABLO_CLEAR` - clears the diablo tapdance status.
+* `KC_CCCV` - Copy on hold, paste on tap.
+* `KEYLOCK` - This unloads the host driver, and prevents any data from being sent to the host. Hitting it again loads the driver, back. 
+* `REBOOT` - Uses watchdog timer on AVR, and `NVIC_SystemReset()` on ChibiOS to reset the board, without jumping to the bootloader.
+* `EEP_RST` - Overrides the default behavior, disables EEPROM (which will trigger a reset on init), and reboots the keyboard as per `REBOOT` keycode.