Merge branch 'master'

Conflicts:
	keyboards/planck/keymaps/bone2planck/keymap.c

40 files changed, 4416 insertions, 4162 deletions

diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
index 72f3ff04c7..02e7063c66 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
@@ -1,161 +1,161 @@
-<asf xmlversion="1.0">

-	<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">

-		<info type="description" value="summary">

-		CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

- 		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderCDC.c"/>

-		<build type="header-file" value="BootloaderCDC.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
+		<info type="description" value="summary">
+		CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+ 		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderCDC.c"/>
+		<build type="header-file" value="BootloaderCDC.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
+		<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
index 6f3312b764..f56aba69f5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">

-	<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">

-		<info type="description" value="summary">

-		DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

- 		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderDFU.c"/>

-		<build type="header-file" value="BootloaderDFU.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
+		<info type="description" value="summary">
+		DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+ 		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderDFU.c"/>
+		<build type="header-file" value="BootloaderDFU.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
index 9394b13530..c67b9419ed 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
@@ -1,123 +1,123 @@
-<asf xmlversion="1.0">

-	<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-	</project>

-

-	<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-	</project>

-

-	<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-	</project>

-

-	<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3800"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>

-	</project>

-

-	<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1800"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">

-		<info type="description" value="summary">

-		HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderHID.c"/>

-		<build type="header-file" value="BootloaderHID.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>

-		<build type="distribute" subtype="directory" value="HostLoaderApp"/>

-		<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+	</project>
+
+	<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+	</project>
+
+	<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+	</project>
+
+	<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
+	</project>
+
+	<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
+		<info type="description" value="summary">
+		HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderHID.c"/>
+		<build type="header-file" value="BootloaderHID.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
+		<build type="distribute" subtype="directory" value="HostLoaderApp"/>
+		<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
index 6844d4b01c..91fc949666 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
@@ -1,102 +1,102 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2014.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaims all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-#if AUX_BOOT_SECTION_SIZE > 0

-#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).

-

-; Trampoline to jump over the AUX bootloader section to the start of the bootloader,

-; on devices where an AUX bootloader section is used.

-.section .boot_aux_trampoline, "ax"

-.global Boot_AUX_Trampoline

-Boot_AUX_Trampoline:

-	jmp BOOT_START_ADDR

-#endif

-

-; Trampolines to actual API implementations if the target address is outside the

-; range of a rjmp instruction (can happen with large bootloader sections)

-.section .apitable_trampolines, "ax"

-.global BootloaderAPI_Trampolines

-BootloaderAPI_Trampolines:

-

-	BootloaderAPI_ErasePage_Trampoline:

-		jmp BootloaderAPI_ErasePage

-	BootloaderAPI_WritePage_Trampoline:

-		jmp BootloaderAPI_WritePage

-	BootloaderAPI_FillWord_Trampoline:

-		jmp BootloaderAPI_FillWord

-	BootloaderAPI_ReadSignature_Trampoline:

-		jmp BootloaderAPI_ReadSignature

-	BootloaderAPI_ReadFuse_Trampoline:

-		jmp BootloaderAPI_ReadFuse

-	BootloaderAPI_ReadLock_Trampoline:

-		jmp BootloaderAPI_ReadLock

-	BootloaderAPI_WriteLock_Trampoline:

-		jmp BootloaderAPI_WriteLock

-	BootloaderAPI_UNUSED1:

-		ret

-	BootloaderAPI_UNUSED2:

-		ret

-	BootloaderAPI_UNUSED3:

-		ret

-	BootloaderAPI_UNUSED4:

-		ret

-	BootloaderAPI_UNUSED5:

-		ret

-

-

-

-; API function jump table

-.section .apitable_jumptable, "ax"

-.global BootloaderAPI_JumpTable

-BootloaderAPI_JumpTable:

-

-	rjmp BootloaderAPI_ErasePage_Trampoline

-	rjmp BootloaderAPI_WritePage_Trampoline

-	rjmp BootloaderAPI_FillWord_Trampoline

-	rjmp BootloaderAPI_ReadSignature_Trampoline

-	rjmp BootloaderAPI_ReadFuse_Trampoline

-	rjmp BootloaderAPI_ReadLock_Trampoline

-	rjmp BootloaderAPI_WriteLock_Trampoline

-	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1

-	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2

-	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3

-	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4

-	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5

-

-

-

-; Bootloader table signatures and information

-.section .apitable_signatures, "ax"

-.global BootloaderAPI_Signatures

-BootloaderAPI_Signatures:

-

-	.long BOOT_START_ADDR ; Start address of the bootloader

-	.word 0xDF30 ; Signature for the MS class bootloader, V1

-	.word 0xDCFB ; Signature for a LUFA class bootloader

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2014.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#if AUX_BOOT_SECTION_SIZE > 0
+#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
+
+; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
+; on devices where an AUX bootloader section is used.
+.section .boot_aux_trampoline, "ax"
+.global Boot_AUX_Trampoline
+Boot_AUX_Trampoline:
+	jmp BOOT_START_ADDR
+#endif
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+	BootloaderAPI_ErasePage_Trampoline:
+		jmp BootloaderAPI_ErasePage
+	BootloaderAPI_WritePage_Trampoline:
+		jmp BootloaderAPI_WritePage
+	BootloaderAPI_FillWord_Trampoline:
+		jmp BootloaderAPI_FillWord
+	BootloaderAPI_ReadSignature_Trampoline:
+		jmp BootloaderAPI_ReadSignature
+	BootloaderAPI_ReadFuse_Trampoline:
+		jmp BootloaderAPI_ReadFuse
+	BootloaderAPI_ReadLock_Trampoline:
+		jmp BootloaderAPI_ReadLock
+	BootloaderAPI_WriteLock_Trampoline:
+		jmp BootloaderAPI_WriteLock
+	BootloaderAPI_UNUSED1:
+		ret
+	BootloaderAPI_UNUSED2:
+		ret
+	BootloaderAPI_UNUSED3:
+		ret
+	BootloaderAPI_UNUSED4:
+		ret
+	BootloaderAPI_UNUSED5:
+		ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+	rjmp BootloaderAPI_ErasePage_Trampoline
+	rjmp BootloaderAPI_WritePage_Trampoline
+	rjmp BootloaderAPI_FillWord_Trampoline
+	rjmp BootloaderAPI_ReadSignature_Trampoline
+	rjmp BootloaderAPI_ReadFuse_Trampoline
+	rjmp BootloaderAPI_ReadLock_Trampoline
+	rjmp BootloaderAPI_WriteLock_Trampoline
+	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+	.long BOOT_START_ADDR ; Start address of the bootloader
+	.word 0xDF30 ; Signature for the MS class bootloader, V1
+	.word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
index f1d550d1eb..700ffa26ff 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">

-	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>

-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>

-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">

-		<info type="description" value="summary">

-		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderMassStorage.c"/>

-		<build type="header-file" value="BootloaderMassStorage.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="include-path" value="Lib"/>

-		<build type="header-file" value="Lib/VirtualFAT.h"/>

-		<build type="c-source" value="Lib/VirtualFAT.c"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
+		<info type="description" value="summary">
+		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderMassStorage.c"/>
+		<build type="header-file" value="BootloaderMassStorage.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="include-path" value="Lib"/>
+		<build type="header-file" value="Lib/VirtualFAT.h"/>
+		<build type="c-source" value="Lib/VirtualFAT.c"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
index 91bb4038e8..a0edb2c4f5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
@@ -1,68 +1,68 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-BOARD        = USBKEY

-F_CPU        = 8000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = BootloaderMassStorage

-SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)

-LUFA_PATH    = ../../LUFA

-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)

-LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)

-

-# Flash size and bootloader section sizes of the target, in KB. These must

-# match the target's total FLASH size and the bootloader size set in the

-# device's fuses.

-FLASH_SIZE_KB         = 128

-BOOT_SECTION_SIZE_KB  = 8

-

-# Bootloader address calculation formulas

-# Do not modify these macros, but rather modify the dependent values above.

-CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )

-BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )

-BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )

-

-# Bootloader linker section flags for relocating the API table sections to

-# known FLASH addresses - these should not normally be user-edited.

-BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))

-BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)

-

-# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the

-# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum

-# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.

-ifeq ($(BOOT_SECTION_SIZE_KB),8)

-  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE=0

-else

-  AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))

-

-  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'

-  LD_FLAGS           += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))

-  LD_FLAGS           += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)

-endif

-

-# Default target

-all:

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_sources.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_avrdude.mk

-include $(LUFA_PATH)/Build/lufa_atprogram.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = BootloaderMassStorage
+SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB         = 128
+BOOT_SECTION_SIZE_KB  = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
+
+# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
+# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
+# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
+ifeq ($(BOOT_SECTION_SIZE_KB),8)
+  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE=0
+else
+  AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
+
+  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
+  LD_FLAGS           += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
+  LD_FLAGS           += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
+endif
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
index ec499b74e5..88c51da825 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
@@ -1,91 +1,91 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2014.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaims all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-; Trampolines to actual API implementations if the target address is outside the

-; range of a rjmp instruction (can happen with large bootloader sections)

-.section .apitable_trampolines, "ax"

-.global BootloaderAPI_Trampolines

-BootloaderAPI_Trampolines:

-

-	BootloaderAPI_ErasePage_Trampoline:

-		jmp BootloaderAPI_ErasePage

-	BootloaderAPI_WritePage_Trampoline:

-		jmp BootloaderAPI_WritePage

-	BootloaderAPI_FillWord_Trampoline:

-		jmp BootloaderAPI_FillWord

-	BootloaderAPI_ReadSignature_Trampoline:

-		jmp BootloaderAPI_ReadSignature

-	BootloaderAPI_ReadFuse_Trampoline:

-		jmp BootloaderAPI_ReadFuse

-	BootloaderAPI_ReadLock_Trampoline:

-		jmp BootloaderAPI_ReadLock

-	BootloaderAPI_WriteLock_Trampoline:

-		jmp BootloaderAPI_WriteLock

-	BootloaderAPI_UNUSED1:

-		ret

-	BootloaderAPI_UNUSED2:

-		ret

-	BootloaderAPI_UNUSED3:

-		ret

-	BootloaderAPI_UNUSED4:

-		ret

-	BootloaderAPI_UNUSED5:

-		ret

-

-

-

-; API function jump table

-.section .apitable_jumptable, "ax"

-.global BootloaderAPI_JumpTable

-BootloaderAPI_JumpTable:

-

-	rjmp BootloaderAPI_ErasePage_Trampoline

-	rjmp BootloaderAPI_WritePage_Trampoline

-	rjmp BootloaderAPI_FillWord_Trampoline

-	rjmp BootloaderAPI_ReadSignature_Trampoline

-	rjmp BootloaderAPI_ReadFuse_Trampoline

-	rjmp BootloaderAPI_ReadLock_Trampoline

-	rjmp BootloaderAPI_WriteLock_Trampoline

-	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1

-	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2

-	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3

-	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4

-	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5

-

-

-

-; Bootloader table signatures and information

-.section .apitable_signatures, "ax"

-.global BootloaderAPI_Signatures

-BootloaderAPI_Signatures:

-

-	.long BOOT_START_ADDR ; Start address of the bootloader

-	.word 0xDF20 ; Signature for the Printer class bootloader

-	.word 0xDCFB ; Signature for a LUFA class bootloader

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2014.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+	BootloaderAPI_ErasePage_Trampoline:
+		jmp BootloaderAPI_ErasePage
+	BootloaderAPI_WritePage_Trampoline:
+		jmp BootloaderAPI_WritePage
+	BootloaderAPI_FillWord_Trampoline:
+		jmp BootloaderAPI_FillWord
+	BootloaderAPI_ReadSignature_Trampoline:
+		jmp BootloaderAPI_ReadSignature
+	BootloaderAPI_ReadFuse_Trampoline:
+		jmp BootloaderAPI_ReadFuse
+	BootloaderAPI_ReadLock_Trampoline:
+		jmp BootloaderAPI_ReadLock
+	BootloaderAPI_WriteLock_Trampoline:
+		jmp BootloaderAPI_WriteLock
+	BootloaderAPI_UNUSED1:
+		ret
+	BootloaderAPI_UNUSED2:
+		ret
+	BootloaderAPI_UNUSED3:
+		ret
+	BootloaderAPI_UNUSED4:
+		ret
+	BootloaderAPI_UNUSED5:
+		ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+	rjmp BootloaderAPI_ErasePage_Trampoline
+	rjmp BootloaderAPI_WritePage_Trampoline
+	rjmp BootloaderAPI_FillWord_Trampoline
+	rjmp BootloaderAPI_ReadSignature_Trampoline
+	rjmp BootloaderAPI_ReadFuse_Trampoline
+	rjmp BootloaderAPI_ReadLock_Trampoline
+	rjmp BootloaderAPI_WriteLock_Trampoline
+	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+	.long BOOT_START_ADDR ; Start address of the bootloader
+	.word 0xDF20 ; Signature for the Printer class bootloader
+	.word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
index 86a56911ed..b5c0c6b3a5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
@@ -1,159 +1,159 @@
-<asf xmlversion="1.0">

-	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">

-		<info type="description" value="summary">

-		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderPrinter.c"/>

-		<build type="header-file" value="BootloaderPrinter.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
+		<info type="description" value="summary">
+		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderPrinter.c"/>
+		<build type="header-file" value="BootloaderPrinter.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
index 0716c3bbe8..0db035de3b 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
@@ -1,55 +1,55 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-BOARD        = USBKEY

-F_CPU        = 8000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = BootloaderPrinter

-SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)

-LUFA_PATH    = ../../LUFA

-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)

-LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)

-

-# Flash size and bootloader section sizes of the target, in KB. These must

-# match the target's total FLASH size and the bootloader size set in the

-# device's fuses.

-FLASH_SIZE_KB         = 128

-BOOT_SECTION_SIZE_KB  = 8

-

-# Bootloader address calculation formulas

-# Do not modify these macros, but rather modify the dependent values above.

-CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )

-BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )

-BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )

-

-# Bootloader linker section flags for relocating the API table sections to

-# known FLASH addresses - these should not normally be user-edited.

-BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))

-BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)

-

-# Default target

-all:

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_sources.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_avrdude.mk

-include $(LUFA_PATH)/Build/lufa_atprogram.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = BootloaderPrinter
+SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB         = 128
+BOOT_SECTION_SIZE_KB  = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile b/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
index 9fd188c936..e839ba6b1d 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
@@ -1,42 +1,42 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-F_CPU        = 1000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = HID_EEPROM_Loader

-SRC          = $(TARGET).c

-LUFA_PATH    = ../../../LUFA

-CC_FLAGS     =

-LD_FLAGS     =

-OBJECT_FILES = InputEEData.o

-

-# Default target

-all:

-

-# Determine the AVR sub-architecture of the build main application object file

-FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)

-

-# Create a linkable object file with the input binary EEPROM data stored in the FLASH section

-InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)

-	@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"

-	avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_hid.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+F_CPU        = 1000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = HID_EEPROM_Loader
+SRC          = $(TARGET).c
+LUFA_PATH    = ../../../LUFA
+CC_FLAGS     =
+LD_FLAGS     =
+OBJECT_FILES = InputEEData.o
+
+# Default target
+all:
+
+# Determine the AVR sub-architecture of the build main application object file
+FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
+
+# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
+InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
+	@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
+	avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
index fd65db283f..e952714e16 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
@@ -1,55 +1,55 @@
-<asf xmlversion="1.0">

-	<project caption="USB Device Template" id="lufa.templates.device.project.avr8">

-		<require idref="lufa.templates.device"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<project caption="USB Device Template" id="lufa.templates.device.project.xmega">

-		<require idref="lufa.templates.device"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="atxmega256a3bu"/>

-		<config name="lufa.drivers.board.name" value="a3bu_xplained"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.templates.device" caption="USB Device Template">

-		<info type="description" value="summary">

-		Template for a LUFA USB device mode application.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="USB Device"/>

-			<keyword value="Template Projects"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="c-source" value="DeviceApplication.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="DeviceApplication.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value=".."/>

-		<build type="header-file" value="../LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
+		<require idref="lufa.templates.device"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
+		<require idref="lufa.templates.device"/>
+		<require idref="lufa.boards.dummy.xmega"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="atxmega256a3bu"/>
+		<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
+
+		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.templates.device" caption="USB Device Template">
+		<info type="description" value="summary">
+		Template for a LUFA USB device mode application.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="USB Device"/>
+			<keyword value="Template Projects"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="c-source" value="DeviceApplication.c"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="DeviceApplication.h"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value=".."/>
+		<build type="header-file" value="../LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
index c1996ec711..c3860c056d 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
@@ -1,41 +1,41 @@
-<asf xmlversion="1.0">

-	<project caption="USB Host Template" id="lufa.templates.host.project">

-		<require idref="lufa.templates.host"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8_template"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.templates.host" caption="USB Host Template">

-		<info type="description" value="summary">

-		Template for a LUFA USB host mode application.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="USB Host"/>

-			<keyword value="Template Projects"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="c-source" value="HostApplication.c"/>

-		<build type="header-file" value="HostApplication.h"/>

-

-		<build type="module-config" subtype="path" value=".."/>

-		<build type="header-file" value="../LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="USB Host Template" id="lufa.templates.host.project">
+		<require idref="lufa.templates.host"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8_template"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
+
+		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
+	</project>
+
+	<module type="application" id="lufa.templates.host" caption="USB Host Template">
+		<info type="description" value="summary">
+		Template for a LUFA USB host mode application.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="USB Host"/>
+			<keyword value="Template Projects"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="c-source" value="HostApplication.c"/>
+		<build type="header-file" value="HostApplication.h"/>
+
+		<build type="module-config" subtype="path" value=".."/>
+		<build type="header-file" value="../LUFAConfig.h"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
index 7ddfa1be3f..0ae1dd678f 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
@@ -1,975 +1,975 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \page Page_BuildSystem The LUFA Build System

- *

- *  \section Sec_BuildSystem_Overview Overview of the LUFA Build System

- *  The LUFA build system is an attempt at making a set of re-usable, modular build make files which

- *  can be referenced in a LUFA powered project, to minimize the amount of code required in an

- *  application makefile. The system is written in GNU Make, and each module is independent of

- *  one-another.

- *

- *  For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA

- *  build system, see \ref Sec_CompilingApps_Prerequisites.

- *

- *  To use a LUFA build system module, simply add an include to your project makefile. All user projects

- *  should at a minimum include \ref Page_BuildModule_CORE for base functionality:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_core.mk

- *  \endcode

- *

- *  Once included in your project makefile, the associated build module targets will be added to your

- *  project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>

- *  from the command line, substituting in the appropriate target name.

- *

- *  \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.

- *

- *  Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>

- *  be supplied in the project makefile for the module to work, and one or more optional parameters which

- *  may be defined and which will assume a sensible default if not.

- *

- *  \section SSec_BuildSystem_Modules Available Modules

- *

- *  The following modules are included in this LUFA release:

- *

- *  \li \subpage Page_BuildModule_ATPROGRAM - Device Programming

- *  \li \subpage Page_BuildModule_AVRDUDE - Device Programming

- *  \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking

- *  \li \subpage Page_BuildModule_CORE - Core Build System Functions

- *  \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis

- *  \li \subpage Page_BuildModule_DFU - Device Programming

- *  \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation

- *  \li \subpage Page_BuildModule_HID - Device Programming

- *  \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables

- *

- *  If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.

- */

-

- /** \page Page_BuildModule_BUILD The BUILD build module

- *

- *  The BUILD LUFA build system module, providing targets for the compilation,

- *  assembling and linking of an application from source code into binary files

- *  suitable for programming into a target device, using the GCC compiler.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_build.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_BUILD_Requirements Requirements

- *  This module requires the the architecture appropriate binaries of the GCC compiler are available in your

- *  system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio

- *  5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.

- *

- *  \section SSec_BuildModule_BUILD_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>size</tt></td>

- *    <td>Display size of the compiled application FLASH and SRAM segments.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>symbol-sizes</tt></td>

- *    <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>lib</tt></td>

- *    <td>Build and archive all source files into a library A binary file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>all</tt></td>

- *    <td>Build and link the application into ELF debug and HEX binary files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>elf</tt></td>

- *    <td>Build and link the application into an ELF debug file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>bin</tt></td>

- *    <td>Build and link the application and produce a BIN binary file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>hex</tt></td>

- *    <td>Build and link the application and produce HEX and EEP binary files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>lss</tt></td>

- *    <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>clean</tt></td>

- *    <td>Remove all intermediary files and binary output files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>mostlyclean</tt></td>

- *    <td>Remove all intermediary files but preserve any binary output files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt><i>&lt;filename&gt;</i>.s</tt></td>

- *    <td>Create an assembly listing of a given input C/C++ source file.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ARCH</tt></td>

- *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>SRC</tt></td>

- *    <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>F_USB</tt></td>

- *    <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>BOARD</tt></td>

- *    <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OPTIMIZATION</tt></td>

- *    <td>Optimization level to use when compiling source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>C_STANDARD</tt></td>

- *    <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPP_STANDARD</tt></td>

- *    <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DEBUG_FORMAT</tt></td>

- *    <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DEBUG_LEVEL</tt></td>

- *    <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>F_CPU</tt></td>

- *    <td>Speed of the processor CPU clock, in Hz.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>C_FLAGS</tt></td>

- *    <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPP_FLAGS</tt></td>

- *    <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ASM_FLAGS</tt></td>

- *    <td>Flags to pass to the assembler only, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CC_FLAGS</tt></td>

- *    <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>COMPILER_PATH</tt></td>

- *    <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LD_FLAGS</tt></td>

- *    <td>Flags to pass to the linker, after the automatically generated flags.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LINKER_RELAXATIONS</tt></td>

- *    <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size

- *        of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.

- *        \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you

- *              receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OBJDIR</tt></td>

- *    <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.

- *        \note When this option is enabled, all source filenames <b>must</b> be unique.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>OBJECT_FILES</tt></td>

- *    <td>List of additional object files that should be linked into the resulting binary.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_CORE The CORE build module

- *

- *  The core LUFA build system module, providing common build system help and information targets.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_core.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_CORE_Requirements Requirements

- *  This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>

- *  shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).

- *

- *  \section SSec_BuildModule_CORE_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>help</tt></td>

- *    <td>Display build system help and configuration information.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_targets</tt></td>

- *    <td>List all available build targets from the build system.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_modules</tt></td>

- *    <td>List all available build modules from the build system.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_mandatory</tt></td>

- *    <td>List all mandatory parameters required by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_optional</tt></td>

- *    <td>List all optional parameters required by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_provided</tt></td>

- *    <td>List all variables provided by the included modules.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>list_macros</tt></td>

- *    <td>List all macros provided by the included modules.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module

- *

- *  The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_atprogram.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_ATPROGRAM_Requirements Requirements

- *  This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x

- *  inside the application install folder's "\atbackend" subdirectory.

- *

- *  \section SSec_BuildModule_ATPROGRAM_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>atprogram</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>atprogram-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>ATPROGRAM_PROGRAMMER</tt></td>

- *    <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ATPROGRAM_INTERFACE</tt></td>

- *    <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ATPROGRAM_PORT</tt></td>

- *    <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module

- *

- *  The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_avrdude.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_AVRDUDE_Requirements Requirements

- *  This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for

- *  Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's

- *  source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.

- *

- *  \section SSec_BuildModule_AVRDUDE_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>avrdude</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>avrdude-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>AVRDUDE_PROGRAMMER</tt></td>

- *    <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>AVRDUDE_PORT</tt></td>

- *    <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>AVRDUDE_FLAGS</tt></td>

- *    <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module

- *

- *  The CPPCHECK programming utility LUFA build system module, providing targets to statically

- *  analyze C and C++ source code for errors and performance/style issues.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_cppcheck.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_CPPCHECK_Requirements Requirements

- *  This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>

- *  variable. The <tt>cppcheck</tt> utility is distributed through the project's home page

- *  (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via

- *  the project's source code or through the package manager.

- *

- *  \section SSec_BuildModule_CPPCHECK_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>cppcheck</tt></td>

- *    <td>Statically analyze the project source code for issues.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>cppcheck-config</tt></td>

- *    <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>SRC</tt></td>

- *    <td>List of source files to statically analyze.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>CPPCHECK_INCLUDES</tt></td>

- *    <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_EXCLUDES</tt></td>

- *    <td>Paths or path fragments to exclude when analyzing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>

- *    <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_ENABLE</tt></td>

- *    <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_SUPPRESS</tt></td>

- *    <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>

- *    <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_QUIET</tt></td>

- *    <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>CPPCHECK_FLAGS</tt></td>

- *    <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_DFU The DFU build module

- *

- *  The DFU programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.

- *  This module requires a DFU class bootloader to be running in the target, compatible with

- *  the DFU bootloader protocol as published by Atmel.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_dfu.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_DFU_Requirements Requirements

- *  This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open

- *  source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be

- *  available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility

- *  can be installed via the project's source code or through the package manager.

- *

- *  \section SSec_BuildModule_DFU_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>dfu</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>dfu-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>flip</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>flip-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module

- *

- *  The DOXYGEN code documentation utility LUFA build system module, providing targets to generate

- *  project HTML and other format documentation from a set of source files that include special

- *  Doxygen comments.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_doxygen.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_DOXYGEN_Requirements Requirements

- *  This module requires the <tt>doxygen</tt> utility from the Doxygen website

- *  (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix

- *  systems the <tt>doxygen</tt> utility can be installed via the project's source code or through

- *  the package manager.

- *

- *  \section SSec_BuildModule_DOXYGEN_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>doxygen</tt></td>

- *    <td>Generate project documentation.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>doxygen_create</tt></td>

- *    <td>Create a new Doxygen configuration file using the latest template.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>doxygen_upgrade</tt></td>

- *    <td>Upgrade an existing Doxygen configuration file to the latest template</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>DOXYGEN_CONF</tt></td>

- *    <td>Name and path of the base Doxygen configuration file for the project.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>

- *    <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>

- *    <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_HID The HID build module

- *

- *  The HID programming utility LUFA build system module, providing targets to reprogram an

- *  Atmel processor's FLASH memory with a project's compiled binary output file. This module

- *  requires a HID class bootloader to be running in the target, using a protocol compatible

- *  with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_hid.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_HID_Requirements Requirements

- *  This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID

- *  class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC

- *  (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>

- *  variable.

- *

- *  \section SSec_BuildModule_HID_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><tt>hid</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>hid-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and

- *        a temporary AVR application programmed into the target's FLASH.

- *        \note This will erase the currently loaded application in the target.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>teensy</tt></td>

- *    <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>teensy-ee</tt></td>

- *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and

- *        a temporary AVR application programmed into the target's FLASH.

- *        \note This will erase the currently loaded application in the target.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>MCU</tt></td>

- *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>TARGET</tt></td>

- *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

- /** \page Page_BuildModule_SOURCES The SOURCES build module

- *

- *  The SOURCES LUFA build system module, providing variables listing the various LUFA source files

- *  required to be build by a project for a given LUFA module. This module gives a way to reference

- *  LUFA source files symbolically, so that changes to the library structure do not break the library

- *  makefile.

- *

- *  To use this module in your application makefile, add the following code:

- *  \code

- *  include $(LUFA_PATH)/Build/lufa_sources.mk

- *  \endcode

- *

- *  \section SSec_BuildModule_SOURCES_Requirements Requirements

- *  None.

- *

- *  \section SSec_BuildModule_SOURCES_Targets Targets

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_PATH</tt></td>

- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td><tt>ARCH</tt></td>

- *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables

- *

- *  <table>

- *   <tr>

- *    <td><tt>LUFA_SRC_USB</tt></td>

- *    <td>List of LUFA USB driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_USBCLASS</tt></td>

- *    <td>List of LUFA USB Class driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_TEMPERATURE</tt></td>

- *    <td>List of LUFA temperature sensor driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_SERIAL</tt></td>

- *    <td>List of LUFA Serial U(S)ART driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_TWI</tt></td>

- *    <td>List of LUFA TWI driver source files.</td>

- *   </tr>

- *   <tr>

- *    <td><tt>LUFA_SRC_PLATFORM</tt></td>

- *    <td>List of LUFA architecture specific platform management source files.</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros

- *

- *  <table>

- *   <tr>

- *    <td><i>None</i></td>

- *   </tr>

- *  </table>

- */

-

-/** \page Page_BuildTroubleshooting Troubleshooting Information

- *

- *  LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these

- *  features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different

- *  errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.

- *

- *  <table>

- *    <tr>

- *    <th>Problem</th>

- *    <th>Resolution</th>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>

- *        from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>

- *    <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>

- *    <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with

- *        GNU make or other variants of Make causing an infinitely recursive build.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>

- *    <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA

- *        build system modules. Define the value in your project makefile and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration

- *        option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").

- *        This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not

- *        recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>

- *    <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.

- *        This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>

- *    <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or

- *        relative path given in the user project makefile is correct and try again.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>

- *    <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists

- *        and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration

- *        file.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>

- *    <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration

- *        options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or

- *        upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>

- *    <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or

- *        absolute path to the LUFA library core.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>

- *    <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be

- *        found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>

- *        parameter.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>

- *    <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This

- *        usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the

- *        compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>

- *    <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the

- *        version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>

- *   </tr>

- *   <tr>

- *    <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>

- *    <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA

- *        library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>

- *   </tr>

- *  </table>

- *

- *  For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \page Page_BuildSystem The LUFA Build System
+ *
+ *  \section Sec_BuildSystem_Overview Overview of the LUFA Build System
+ *  The LUFA build system is an attempt at making a set of re-usable, modular build make files which
+ *  can be referenced in a LUFA powered project, to minimize the amount of code required in an
+ *  application makefile. The system is written in GNU Make, and each module is independent of
+ *  one-another.
+ *
+ *  For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA
+ *  build system, see \ref Sec_CompilingApps_Prerequisites.
+ *
+ *  To use a LUFA build system module, simply add an include to your project makefile. All user projects
+ *  should at a minimum include \ref Page_BuildModule_CORE for base functionality:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_core.mk
+ *  \endcode
+ *
+ *  Once included in your project makefile, the associated build module targets will be added to your
+ *  project's build makefile targets automatically. To call a build target, run <tt>make {TARGET_NAME}</tt>
+ *  from the command line, substituting in the appropriate target name.
+ *
+ *  \see \ref Sec_ConfiguringApps_AppMakefileParams for a copy of the sample LUFA project makefile.
+ *
+ *  Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>
+ *  be supplied in the project makefile for the module to work, and one or more optional parameters which
+ *  may be defined and which will assume a sensible default if not.
+ *
+ *  \section SSec_BuildSystem_Modules Available Modules
+ *
+ *  The following modules are included in this LUFA release:
+ *
+ *  \li \subpage Page_BuildModule_ATPROGRAM - Device Programming
+ *  \li \subpage Page_BuildModule_AVRDUDE - Device Programming
+ *  \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking
+ *  \li \subpage Page_BuildModule_CORE - Core Build System Functions
+ *  \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis
+ *  \li \subpage Page_BuildModule_DFU - Device Programming
+ *  \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation
+ *  \li \subpage Page_BuildModule_HID - Device Programming
+ *  \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables
+ *
+ *  If you have problems building using the LUFA build system, see \subpage Page_BuildTroubleshooting for resolution steps.
+ */
+
+ /** \page Page_BuildModule_BUILD The BUILD build module
+ *
+ *  The BUILD LUFA build system module, providing targets for the compilation,
+ *  assembling and linking of an application from source code into binary files
+ *  suitable for programming into a target device, using the GCC compiler.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_build.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_BUILD_Requirements Requirements
+ *  This module requires the the architecture appropriate binaries of the GCC compiler are available in your
+ *  system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio
+ *  5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.
+ *
+ *  \section SSec_BuildModule_BUILD_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>size</tt></td>
+ *    <td>Display size of the compiled application FLASH and SRAM segments.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>symbol-sizes</tt></td>
+ *    <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>lib</tt></td>
+ *    <td>Build and archive all source files into a library A binary file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>all</tt></td>
+ *    <td>Build and link the application into ELF debug and HEX binary files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>elf</tt></td>
+ *    <td>Build and link the application into an ELF debug file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>bin</tt></td>
+ *    <td>Build and link the application and produce a BIN binary file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>hex</tt></td>
+ *    <td>Build and link the application and produce HEX and EEP binary files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>lss</tt></td>
+ *    <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>clean</tt></td>
+ *    <td>Remove all intermediary files and binary output files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>mostlyclean</tt></td>
+ *    <td>Remove all intermediary files but preserve any binary output files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt><i>&lt;filename&gt;</i>.s</tt></td>
+ *    <td>Create an assembly listing of a given input C/C++ source file.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ARCH</tt></td>
+ *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>SRC</tt></td>
+ *    <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>F_USB</tt></td>
+ *    <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>BOARD</tt></td>
+ *    <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OPTIMIZATION</tt></td>
+ *    <td>Optimization level to use when compiling source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>C_STANDARD</tt></td>
+ *    <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPP_STANDARD</tt></td>
+ *    <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DEBUG_FORMAT</tt></td>
+ *    <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DEBUG_LEVEL</tt></td>
+ *    <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>F_CPU</tt></td>
+ *    <td>Speed of the processor CPU clock, in Hz.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>C_FLAGS</tt></td>
+ *    <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPP_FLAGS</tt></td>
+ *    <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ASM_FLAGS</tt></td>
+ *    <td>Flags to pass to the assembler only, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CC_FLAGS</tt></td>
+ *    <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>COMPILER_PATH</tt></td>
+ *    <td>Directory where the C/C++ toolchain is located, if not available in the system <tt>PATH</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LD_FLAGS</tt></td>
+ *    <td>Flags to pass to the linker, after the automatically generated flags.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LINKER_RELAXATIONS</tt></td>
+ *    <td>Enables or disables linker relaxations when linking the application binary. This can reduce the total size
+ *        of the application by replacing full \c CALL instructions with smaller \c RCALL instructions where possible.
+ *        \note On some unpatched versions of binutils, this can cause link failures in some circumstances. If you
+ *              receive a link error <tt>relocation truncated to fit: R_AVR_13_PCREL</tt>, disable this setting.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OBJDIR</tt></td>
+ *    <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.
+ *        \note When this option is enabled, all source filenames <b>must</b> be unique.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>OBJECT_FILES</tt></td>
+ *    <td>List of additional object files that should be linked into the resulting binary.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_CORE The CORE build module
+ *
+ *  The core LUFA build system module, providing common build system help and information targets.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_core.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_CORE_Requirements Requirements
+ *  This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>
+ *  shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).
+ *
+ *  \section SSec_BuildModule_CORE_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>help</tt></td>
+ *    <td>Display build system help and configuration information.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_targets</tt></td>
+ *    <td>List all available build targets from the build system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_modules</tt></td>
+ *    <td>List all available build modules from the build system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_mandatory</tt></td>
+ *    <td>List all mandatory parameters required by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_optional</tt></td>
+ *    <td>List all optional parameters required by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_provided</tt></td>
+ *    <td>List all variables provided by the included modules.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>list_macros</tt></td>
+ *    <td>List all macros provided by the included modules.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module
+ *
+ *  The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_atprogram.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_Requirements Requirements
+ *  This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x
+ *  inside the application install folder's "\atbackend" subdirectory.
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>atprogram</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>atprogram-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_PROGRAMMER</tt></td>
+ *    <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_INTERFACE</tt></td>
+ *    <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ATPROGRAM_PORT</tt></td>
+ *    <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module
+ *
+ *  The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_avrdude.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_AVRDUDE_Requirements Requirements
+ *  This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for
+ *  Windows (<a>http://winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's
+ *  source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.
+ *
+ *  \section SSec_BuildModule_AVRDUDE_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>avrdude</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>avrdude-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>AVRDUDE_PROGRAMMER</tt></td>
+ *    <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>AVRDUDE_PORT</tt></td>
+ *    <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>AVRDUDE_FLAGS</tt></td>
+ *    <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module
+ *
+ *  The CPPCHECK programming utility LUFA build system module, providing targets to statically
+ *  analyze C and C++ source code for errors and performance/style issues.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_CPPCHECK_Requirements Requirements
+ *  This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>
+ *  variable. The <tt>cppcheck</tt> utility is distributed through the project's home page
+ *  (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via
+ *  the project's source code or through the package manager.
+ *
+ *  \section SSec_BuildModule_CPPCHECK_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>cppcheck</tt></td>
+ *    <td>Statically analyze the project source code for issues.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>cppcheck-config</tt></td>
+ *    <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>SRC</tt></td>
+ *    <td>List of source files to statically analyze.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>CPPCHECK_INCLUDES</tt></td>
+ *    <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_EXCLUDES</tt></td>
+ *    <td>Paths or path fragments to exclude when analyzing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>
+ *    <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_ENABLE</tt></td>
+ *    <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_SUPPRESS</tt></td>
+ *    <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>
+ *    <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_QUIET</tt></td>
+ *    <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>CPPCHECK_FLAGS</tt></td>
+ *    <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_DFU The DFU build module
+ *
+ *  The DFU programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
+ *  This module requires a DFU class bootloader to be running in the target, compatible with
+ *  the DFU bootloader protocol as published by Atmel.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_dfu.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_DFU_Requirements Requirements
+ *  This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open
+ *  source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be
+ *  available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility
+ *  can be installed via the project's source code or through the package manager.
+ *
+ *  \section SSec_BuildModule_DFU_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>dfu</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>dfu-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>flip</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>flip-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module
+ *
+ *  The DOXYGEN code documentation utility LUFA build system module, providing targets to generate
+ *  project HTML and other format documentation from a set of source files that include special
+ *  Doxygen comments.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_doxygen.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_DOXYGEN_Requirements Requirements
+ *  This module requires the <tt>doxygen</tt> utility from the Doxygen website
+ *  (<a>http://www.doxygen.org/</a>) to be available in your system's <b>PATH</b> variable. On *nix
+ *  systems the <tt>doxygen</tt> utility can be installed via the project's source code or through
+ *  the package manager.
+ *
+ *  \section SSec_BuildModule_DOXYGEN_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>doxygen</tt></td>
+ *    <td>Generate project documentation.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>doxygen_create</tt></td>
+ *    <td>Create a new Doxygen configuration file using the latest template.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>doxygen_upgrade</tt></td>
+ *    <td>Upgrade an existing Doxygen configuration file to the latest template</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>DOXYGEN_CONF</tt></td>
+ *    <td>Name and path of the base Doxygen configuration file for the project.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>
+ *    <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>
+ *    <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_HID The HID build module
+ *
+ *  The HID programming utility LUFA build system module, providing targets to reprogram an
+ *  Atmel processor's FLASH memory with a project's compiled binary output file. This module
+ *  requires a HID class bootloader to be running in the target, using a protocol compatible
+ *  with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_hid.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_HID_Requirements Requirements
+ *  This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID
+ *  class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC
+ *  (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>
+ *  variable.
+ *
+ *  \section SSec_BuildModule_HID_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>hid</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>hid-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and
+ *        a temporary AVR application programmed into the target's FLASH.
+ *        \note This will erase the currently loaded application in the target.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>teensy</tt></td>
+ *    <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>teensy-ee</tt></td>
+ *    <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and
+ *        a temporary AVR application programmed into the target's FLASH.
+ *        \note This will erase the currently loaded application in the target.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>MCU</tt></td>
+ *    <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>TARGET</tt></td>
+ *    <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+ /** \page Page_BuildModule_SOURCES The SOURCES build module
+ *
+ *  The SOURCES LUFA build system module, providing variables listing the various LUFA source files
+ *  required to be build by a project for a given LUFA module. This module gives a way to reference
+ *  LUFA source files symbolically, so that changes to the library structure do not break the library
+ *  makefile.
+ *
+ *  To use this module in your application makefile, add the following code:
+ *  \code
+ *  include $(LUFA_PATH)/Build/lufa_sources.mk
+ *  \endcode
+ *
+ *  \section SSec_BuildModule_SOURCES_Requirements Requirements
+ *  None.
+ *
+ *  \section SSec_BuildModule_SOURCES_Targets Targets
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_PATH</tt></td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>ARCH</tt></td>
+ *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables
+ *
+ *  <table>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_USB</tt></td>
+ *    <td>List of LUFA USB driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_USBCLASS</tt></td>
+ *    <td>List of LUFA USB Class driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
+ *    <td>List of LUFA temperature sensor driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_SERIAL</tt></td>
+ *    <td>List of LUFA Serial U(S)ART driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_TWI</tt></td>
+ *    <td>List of LUFA TWI driver source files.</td>
+ *   </tr>
+ *   <tr>
+ *    <td><tt>LUFA_SRC_PLATFORM</tt></td>
+ *    <td>List of LUFA architecture specific platform management source files.</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros
+ *
+ *  <table>
+ *   <tr>
+ *    <td><i>None</i></td>
+ *   </tr>
+ *  </table>
+ */
+
+/** \page Page_BuildTroubleshooting Troubleshooting Information
+ *
+ *  LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and surrounding binaries. This can sometimes lead to problems compiling applications if one of these
+ *  features is buggy in the version of the tools used in a build environment. Missing utilities and incorrectly set makefile configuration options can also result in different
+ *  errors being produced when compilation or other operations are attempted. The table below lists a set of commonly encountered errors and their resolutions.
+ *
+ *  <table>
+ *    <tr>
+ *    <th>Problem</th>
+ *    <th>Resolution</th>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
+ *        from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>
+ *    <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>
+ *    <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
+ *        GNU make or other variants of Make causing an infinitely recursive build.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>
+ *    <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
+ *        build system modules. Define the value in your project makefile and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
+ *        option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
+ *        This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
+ *        recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>
+ *    <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
+ *        This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
+ *        relative path given in the user project makefile is correct and try again.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>
+ *    <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
+ *        and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
+ *        file.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ *    <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
+ *        options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
+ *        upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>
+ *    <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
+ *        absolute path to the LUFA library core.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>
+ *    <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
+ *        found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
+ *        parameter.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>
+ *    <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
+ *        usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
+ *        compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>
+ *    <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
+ *        version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ *    <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
+ *        library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_SOURCES).</td>
+ *   </tr>
+ *  </table>
+ *
+ *  For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
+ */
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt
index 486e9a4270..a34fd58dfa 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/mshelp/placeholder.txt
@@ -1 +1 @@
-Copy the Microsoft HV1 Docbook transform contents into this directory (i.e. with the XSLT files in the current folder). The HV1 transform proposal can be found at http://sourceforge.net/tracker/?func=detail&aid=3610290&group_id=21935&atid=373750 .

+Copy the Microsoft HV1 Docbook transform contents into this directory (i.e. with the XSLT files in the current folder). The HV1 transform proposal can be found at http://sourceforge.net/tracker/?func=detail&aid=3610290&group_id=21935&atid=373750 .
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt
index c017acfd75..dd69b7e0bd 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/Docbook/placeholder.txt
@@ -1 +1 @@
-Copy the Docbook XSLT docbook-xsl-1.78.1 release contents into this directory (i.e. with the root Docbook files in the current folder). The Docbook releases can be found at http://sourceforge.net/projects/docbook/files/docbook-xsl/ .

+Copy the Docbook XSLT docbook-xsl-1.78.1 release contents into this directory (i.e. with the root Docbook files in the current folder). The Docbook releases can be found at http://sourceforge.net/projects/docbook/files/docbook-xsl/ .
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt
index ee8a38340d..8aa4a9413e 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_hv1_transform.xslt
@@ -1,45 +1,45 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Docbook XML to Microsoft Help Viewer 1.0 transform file -->

-

-<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">

-

-	<xsl:import href="../Docbook/mshelp/docbook.xsl"/>

-

-	<xsl:output method="xml" indent="no"/>

-

-	<xsl:template match="emphasis[@role = 'keyword' or @role = 'keywordtype' or @role = 'keywordflow']">

-		<span class="hl-keyword" style="color: #0079C1">

-			<xsl:apply-templates/>

-		</span>

-	</xsl:template>

-

-	<xsl:template match="emphasis[@role = 'stringliteral' or @role = 'charliteral']">

-		<span class="hl-string" style="color: #800000">

-			<xsl:apply-templates/>

-		</span>

-	</xsl:template>

-

-	<xsl:template match="emphasis[@role = 'comment']">

-		<em class="hl-comment" style="color: #008000">

-			<xsl:apply-templates/>

-		</em>

-	</xsl:template>

-

-	<xsl:template match="emphasis[@role = 'preprocessor']">

-		<span class="hl-preprocessor" style="color: #A000A0">

-			<xsl:apply-templates/>

-		</span>

-	</xsl:template>

-

-	<xsl:template match="emphasis[@role = 'normal' and ancestor::programlisting]">

-		<xsl:apply-templates />

-	</xsl:template>

-

-</xsl:stylesheet>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Docbook XML to Microsoft Help Viewer 1.0 transform file -->
+
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
+
+	<xsl:import href="../Docbook/mshelp/docbook.xsl"/>
+
+	<xsl:output method="xml" indent="no"/>
+
+	<xsl:template match="emphasis[@role = 'keyword' or @role = 'keywordtype' or @role = 'keywordflow']">
+		<span class="hl-keyword" style="color: #0079C1">
+			<xsl:apply-templates/>
+		</span>
+	</xsl:template>
+
+	<xsl:template match="emphasis[@role = 'stringliteral' or @role = 'charliteral']">
+		<span class="hl-string" style="color: #800000">
+			<xsl:apply-templates/>
+		</span>
+	</xsl:template>
+
+	<xsl:template match="emphasis[@role = 'comment']">
+		<em class="hl-comment" style="color: #008000">
+			<xsl:apply-templates/>
+		</em>
+	</xsl:template>
+
+	<xsl:template match="emphasis[@role = 'preprocessor']">
+		<span class="hl-preprocessor" style="color: #A000A0">
+			<xsl:apply-templates/>
+		</span>
+	</xsl:template>
+
+	<xsl:template match="emphasis[@role = 'normal' and ancestor::programlisting]">
+		<xsl:apply-templates />
+	</xsl:template>
+
+</xsl:stylesheet>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css
index 49eb7e9706..0b6ccbd8c1 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/HV1/lufa_studio_help_styling.css
@@ -1,53 +1,53 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-.programlisting {

- 	display: block;

- 	margin-left: 15px;

- 	padding: 10px;

- 	background-color: #f4f4f4;

- 	border: 1px solid #aaaaaa;

- 	font-family: "Consolas", "Courier New", sans-serif;

- }

-

- code {

- 	background-color: #f4f4f4;

- 	font-family: "Consolas", "Courier New", sans-serif;

- }

-

-.note, .warning, .tip {

-	display: block;

- 	margin-left: 15px;

- 	padding-left: 10px;

- 	padding-bottom: 5px;

- 	background-color: #f4f4f4;

- 	border: 1px solid #aaaaaa;

-}

-

-table {

-	border: 1px solid #aaaaaa;

-	border-collapse: collapse;

-	margin-left: 15px;

-	font-size: 10pt;

-}

-

-table thead {

- 	background-color: #f4f4f4;

-}

-

-table thead th {

-	padding: 5px;

-}

-

-table tbody td {

-	padding: 5px;

-}

-

-ul {

-	padding-left: 20px;

-}

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+.programlisting {
+ 	display: block;
+ 	margin-left: 15px;
+ 	padding: 10px;
+ 	background-color: #f4f4f4;
+ 	border: 1px solid #aaaaaa;
+ 	font-family: "Consolas", "Courier New", sans-serif;
+ }
+
+ code {
+ 	background-color: #f4f4f4;
+ 	font-family: "Consolas", "Courier New", sans-serif;
+ }
+
+.note, .warning, .tip {
+	display: block;
+ 	margin-left: 15px;
+ 	padding-left: 10px;
+ 	padding-bottom: 5px;
+ 	background-color: #f4f4f4;
+ 	border: 1px solid #aaaaaa;
+}
+
+table {
+	border: 1px solid #aaaaaa;
+	border-collapse: collapse;
+	margin-left: 15px;
+	font-size: 10pt;
+}
+
+table thead {
+ 	background-color: #f4f4f4;
+}
+
+table thead th {
+	padding: 5px;
+}
+
+table tbody td {
+	padding: 5px;
+}
+
+ul {
+	padding-left: 20px;
+}
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml
index 05ef8b6ba4..112d169942 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/[Content_Types].xml
@@ -1,13 +1,13 @@
-<Types xmlns="http://schemas.openxmlformats.org/package/2006/content-types">

-	<Default Extension="vsixmanifest" ContentType="text/xml"/>

-	<Default Extension="cache" ContentType="text/xml"/>

-	<Default Extension="png" ContentType="application/octet-stream"/>

-	<Default Extension="txt" ContentType="text/plain"/>

-	<Default Extension="xml" ContentType="text/xml"/>

-	<Default Extension="zip" ContentType="application/octet-stream"/>

-	<Default Extension="dll" ContentType="application/octet-stream" />

-	<Default Extension="pkgdef" ContentType="text/plain" />

-	<Default Extension="htm" ContentType="text/html" />

-	<Default Extension="msha" ContentType="text/html" />

-	<Default Extension="mshc" ContentType="application/octet-stream"/>

-</Types>

+<Types xmlns="http://schemas.openxmlformats.org/package/2006/content-types">
+	<Default Extension="vsixmanifest" ContentType="text/xml"/>
+	<Default Extension="cache" ContentType="text/xml"/>
+	<Default Extension="png" ContentType="application/octet-stream"/>
+	<Default Extension="txt" ContentType="text/plain"/>
+	<Default Extension="xml" ContentType="text/xml"/>
+	<Default Extension="zip" ContentType="application/octet-stream"/>
+	<Default Extension="dll" ContentType="application/octet-stream" />
+	<Default Extension="pkgdef" ContentType="text/plain" />
+	<Default Extension="htm" ContentType="text/html" />
+	<Default Extension="msha" ContentType="text/html" />
+	<Default Extension="mshc" ContentType="application/octet-stream"/>
+</Types>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml
index 794fd689e1..bd969518a1 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/asf-manifest.xml
@@ -1,18 +1,18 @@
-<AsfContentProvider Version="1.0.0">

-	<Identifier Id="0e160d5c-e331-48d9-850b-e0387912171b">

-		<Org>FourWalledCubicle</Org>

-		<ShortName>LUFA</ShortName>

-		<Author>Dean Camera</Author>

-		<Description/>

-		<FollowFolderStructure>True</FollowFolderStructure>

-	</Identifier>

-	<AsfContent Type="zip" Path="contents.zip">

-		<Content>

-			<Version>0</Version>

-			<HelpURL/>

-			<Locator/>

-			<DbXMLPath>content.xml.cache</DbXMLPath>

-			<Description/>

-		</Content>

-	</AsfContent>

-</AsfContentProvider>

+<AsfContentProvider Version="1.0.0">
+	<Identifier Id="0e160d5c-e331-48d9-850b-e0387912171b">
+		<Org>FourWalledCubicle</Org>
+		<ShortName>LUFA</ShortName>
+		<Author>Dean Camera</Author>
+		<Description/>
+		<FollowFolderStructure>True</FollowFolderStructure>
+	</Identifier>
+	<AsfContent Type="zip" Path="contents.zip">
+		<Content>
+			<Version>0</Version>
+			<HelpURL/>
+			<Locator/>
+			<DbXMLPath>content.xml.cache</DbXMLPath>
+			<Description/>
+		</Content>
+	</AsfContent>
+</AsfContentProvider>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest
index ea6edeb258..8475017443 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/extension.vsixmanifest
@@ -1,33 +1,33 @@
-<?xml version="1.0" encoding="utf-8"?>

-

-<Vsix xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Version="1.0.0" xmlns="http://schemas.microsoft.com/developer/vsx-schema/2010">

-	<Identifier Id="FourWalledCubicle.LUFA.0e160d5c-e331-48d9-850b-e0387912171b">

-		<Name>LUFA Library</Name>

-		<Author>Dean Camera</Author>

-		<Version>0</Version>

-		<MoreInfoUrl>http://www.lufa-lib.org</MoreInfoUrl>

-		<Description xml:space="preserve">LUFA, the Lightweight USB Framework for AVRs.</Description>

-

-		<License>License.txt</License>

-		<Icon>LUFA_thumb.png</Icon>

-		<PreviewImage>LUFA.png</PreviewImage>

-

-		<SupportedProducts>

-			<IsolatedShell Version="6.1">AtmelStudio</IsolatedShell>

-			<IsolatedShell Version="6.2">AtmelStudio</IsolatedShell>

-		</SupportedProducts>

-

-		<SupportedFrameworkRuntimeEdition MinVersion="4.0" MaxVersion="4.5"/>

-		<Locale>1033</Locale>

-

-	    <AllUsers>false</AllUsers>

-	</Identifier>

-

-	<References/>

-

-	<Content>

-		<VsPackage>LUFA.pkgdef</VsPackage>

-	    <CustomExtension Type="MSHelp">helpcontentsetup.msha</CustomExtension>

-		<CustomExtension Type="asf-manifest">asf-manifest.xml</CustomExtension>

-	</Content>

-</Vsix>

+<?xml version="1.0" encoding="utf-8"?>
+
+<Vsix xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Version="1.0.0" xmlns="http://schemas.microsoft.com/developer/vsx-schema/2010">
+	<Identifier Id="FourWalledCubicle.LUFA.0e160d5c-e331-48d9-850b-e0387912171b">
+		<Name>LUFA Library</Name>
+		<Author>Dean Camera</Author>
+		<Version>0</Version>
+		<MoreInfoUrl>http://www.lufa-lib.org</MoreInfoUrl>
+		<Description xml:space="preserve">LUFA, the Lightweight USB Framework for AVRs.</Description>
+
+		<License>License.txt</License>
+		<Icon>LUFA_thumb.png</Icon>
+		<PreviewImage>LUFA.png</PreviewImage>
+
+		<SupportedProducts>
+			<IsolatedShell Version="6.1">AtmelStudio</IsolatedShell>
+			<IsolatedShell Version="6.2">AtmelStudio</IsolatedShell>
+		</SupportedProducts>
+
+		<SupportedFrameworkRuntimeEdition MinVersion="4.0" MaxVersion="4.5"/>
+		<Locale>1033</Locale>
+
+	    <AllUsers>false</AllUsers>
+	</Identifier>
+
+	<References/>
+
+	<Content>
+		<VsPackage>LUFA.pkgdef</VsPackage>
+	    <CustomExtension Type="MSHelp">helpcontentsetup.msha</CustomExtension>
+		<CustomExtension Type="asf-manifest">asf-manifest.xml</CustomExtension>
+	</Content>
+</Vsix>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py
index c51cff400d..eb4b71efdf 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/VSIX/generate_caches.py
@@ -1,38 +1,38 @@
-"""

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-"""

-

-import sys

-sys.path.append("ProjectGenerator")

-

-

-def show_message(message):

-    print("[Project Generator] %s" % message)

-    sys.stdout.flush()

-

-

-def main(lufa_root_path):

-    try:

-        from asf_avrstudio5_interface import PythonFacade

-    except ImportError:

-        print("Fatal Error: The ASF project generator is missing.")

-        return 1

-

-    p = PythonFacade(lufa_root_path)

-

-    show_message("Checking database sanity...")

-    p.check_extension_database_sanity(lufa_root_path)

-

-    show_message("Building cache files...")

-    p.generate_extension_cache_files(lufa_root_path)

-

-    show_message("Cache files created.")

-    return 0

-

-

-if __name__ == "__main__":

-    sys.exit(main(sys.argv[1]))

+"""
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+"""
+
+import sys
+sys.path.append("ProjectGenerator")
+
+
+def show_message(message):
+    print("[Project Generator] %s" % message)
+    sys.stdout.flush()
+
+
+def main(lufa_root_path):
+    try:
+        from asf_avrstudio5_interface import PythonFacade
+    except ImportError:
+        print("Fatal Error: The ASF project generator is missing.")
+        return 1
+
+    p = PythonFacade(lufa_root_path)
+
+    show_message("Checking database sanity...")
+    p.check_extension_database_sanity(lufa_root_path)
+
+    show_message("Building cache files...")
+    p.generate_extension_cache_files(lufa_root_path)
+
+    show_message("Cache files created.")
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main(sys.argv[1]))
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml
index 28afdda587..86cfc0409d 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa.xml
@@ -1,96 +1,96 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<extension-container>

-		<extension uuid="0e160d5c-e331-48d9-850b-e0387912171b" org="FourWalledCubicle" shortname="LUFA" version="" fullname="Lightweight USB Framework for AVRs (LUFA)">

-			<author name="Dean Camera" website="http://www.lufa-lib.org/" email="dean@fourwalledcubicle.com"/>

-			<description>Lightweight USB Framework for AVRs (LUFA), a USB software stack/framework.</description>

-			<icon-image path="LUFA/DoxygenPages/Images/LUFA_thumb.png"/>

-			<preview-image path="LUFA/DoxygenPages/Images/LUFA.png"/>

-			<license caption="LUFA License" path="LUFA/License.txt"/>

-			<release-notes caption="LUFA Information" url="http://www.lufa-lib.org"/>

-			<online-help>

-				<index-page caption="LUFA Documentation" url="http://www.lufa-lib.org/documentation/"/>

-				<module-help-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>

-				<module-guide-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>

-			</online-help>

-			<dependencies/>

-		</extension>

-	</extension-container>

-

-	<asf>

-		<device-alias-map name="lufa_avr8">

-			<device-support value="at90usb82"/>

-			<device-support value="atmega8u2"/>

-			<device-support value="at90usb162"/>

-			<device-support value="atmega16u2"/>

-			<device-support value="atmega16u4"/>

-			<device-support value="atmega32u2"/>

-			<device-support value="atmega32u4"/>

-			<device-support value="at90usb646"/>

-			<device-support value="at90usb647"/>

-			<device-support value="at90usb1286"/>

-			<device-support value="at90usb1287"/>

-		</device-alias-map>

-

-		<device-alias-map name="lufa_xmega">

-			<device-support value="atxmega16a4u"/>

-			<device-support value="atxmega32a4u"/>

-			<device-support value="atxmega64a4u"/>

-			<device-support value="atxmega128a4u"/>

-			<device-support value="atxmega64a3u"/>

-			<device-support value="atxmega128a3u"/>

-			<device-support value="atxmega192a3u"/>

-			<device-support value="atxmega256a3u"/>

-			<device-support value="atxmega256a3bu"/>

-			<device-support value="atxmega128a1u"/>

-			<device-support value="atxmega64b3"/>

-			<device-support value="atxmega128b3"/>

-			<device-support value="atxmega64b1"/>

-			<device-support value="atxmega128b1"/>

-			<device-support value="atxmega64c3"/>

-			<device-support value="atxmega128c3"/>

-			<!-- <device-support value="atxmega192c3"/> Wait for ASFP-3339 merge and release before enabling -->

-			<device-support value="atxmega256c3"/>

-			<device-support value="atxmega384c3"/>

-			<device-support value="atxmega16c4"/>

-		</device-alias-map>

-

-		<device-alias-map name="lufa_uc3">

-			<device-support value="at32uc3a364"/>

-			<device-support value="at32uc3a364s"/>

-			<device-support value="at32uc3a464"/>

-			<device-support value="at32uc3a464s"/>

-			<device-support value="at32uc3b064"/>

-			<device-support value="at32uc3b164"/>

-			<device-support value="at32uc3a0128"/>

-			<device-support value="at32uc3a1128"/>

-			<device-support value="at32uc3a3128"/>

-			<device-support value="at32uc3a3128s"/>

-			<device-support value="at32uc3a4128"/>

-			<device-support value="at32uc3a4128s"/>

-			<device-support value="at32uc3b0128"/>

-			<device-support value="at32uc3b1128"/>

-			<device-support value="at32uc3a0256"/>

-			<device-support value="at32uc3a1256"/>

-			<device-support value="at32uc3a3256"/>

-			<device-support value="at32uc3a3256s"/>

-			<device-support value="at32uc3a4256"/>

-			<device-support value="at32uc3a4256s"/>

-			<device-support value="at32uc3b0256"/>

-			<device-support value="at32uc3b1256"/>

-			<device-support value="at32uc3a0512"/>

-			<device-support value="at32uc3a1512"/>

-			<device-support value="at32uc3b0512"/>

-			<device-support value="at32uc3b1512"/>

-		</device-alias-map>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<extension-container>
+		<extension uuid="0e160d5c-e331-48d9-850b-e0387912171b" org="FourWalledCubicle" shortname="LUFA" version="" fullname="Lightweight USB Framework for AVRs (LUFA)">
+			<author name="Dean Camera" website="http://www.lufa-lib.org/" email="dean@fourwalledcubicle.com"/>
+			<description>Lightweight USB Framework for AVRs (LUFA), a USB software stack/framework.</description>
+			<icon-image path="LUFA/DoxygenPages/Images/LUFA_thumb.png"/>
+			<preview-image path="LUFA/DoxygenPages/Images/LUFA.png"/>
+			<license caption="LUFA License" path="LUFA/License.txt"/>
+			<release-notes caption="LUFA Information" url="http://www.lufa-lib.org"/>
+			<online-help>
+				<index-page caption="LUFA Documentation" url="http://www.lufa-lib.org/documentation/"/>
+				<module-help-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>
+				<module-guide-page scheme="append" baseurl="http://www.lufa-lib.org/documentation/"/>
+			</online-help>
+			<dependencies/>
+		</extension>
+	</extension-container>
+
+	<asf>
+		<device-alias-map name="lufa_avr8">
+			<device-support value="at90usb82"/>
+			<device-support value="atmega8u2"/>
+			<device-support value="at90usb162"/>
+			<device-support value="atmega16u2"/>
+			<device-support value="atmega16u4"/>
+			<device-support value="atmega32u2"/>
+			<device-support value="atmega32u4"/>
+			<device-support value="at90usb646"/>
+			<device-support value="at90usb647"/>
+			<device-support value="at90usb1286"/>
+			<device-support value="at90usb1287"/>
+		</device-alias-map>
+
+		<device-alias-map name="lufa_xmega">
+			<device-support value="atxmega16a4u"/>
+			<device-support value="atxmega32a4u"/>
+			<device-support value="atxmega64a4u"/>
+			<device-support value="atxmega128a4u"/>
+			<device-support value="atxmega64a3u"/>
+			<device-support value="atxmega128a3u"/>
+			<device-support value="atxmega192a3u"/>
+			<device-support value="atxmega256a3u"/>
+			<device-support value="atxmega256a3bu"/>
+			<device-support value="atxmega128a1u"/>
+			<device-support value="atxmega64b3"/>
+			<device-support value="atxmega128b3"/>
+			<device-support value="atxmega64b1"/>
+			<device-support value="atxmega128b1"/>
+			<device-support value="atxmega64c3"/>
+			<device-support value="atxmega128c3"/>
+			<!-- <device-support value="atxmega192c3"/> Wait for ASFP-3339 merge and release before enabling -->
+			<device-support value="atxmega256c3"/>
+			<device-support value="atxmega384c3"/>
+			<device-support value="atxmega16c4"/>
+		</device-alias-map>
+
+		<device-alias-map name="lufa_uc3">
+			<device-support value="at32uc3a364"/>
+			<device-support value="at32uc3a364s"/>
+			<device-support value="at32uc3a464"/>
+			<device-support value="at32uc3a464s"/>
+			<device-support value="at32uc3b064"/>
+			<device-support value="at32uc3b164"/>
+			<device-support value="at32uc3a0128"/>
+			<device-support value="at32uc3a1128"/>
+			<device-support value="at32uc3a3128"/>
+			<device-support value="at32uc3a3128s"/>
+			<device-support value="at32uc3a4128"/>
+			<device-support value="at32uc3a4128s"/>
+			<device-support value="at32uc3b0128"/>
+			<device-support value="at32uc3b1128"/>
+			<device-support value="at32uc3a0256"/>
+			<device-support value="at32uc3a1256"/>
+			<device-support value="at32uc3a3256"/>
+			<device-support value="at32uc3a3256s"/>
+			<device-support value="at32uc3a4256"/>
+			<device-support value="at32uc3a4256s"/>
+			<device-support value="at32uc3b0256"/>
+			<device-support value="at32uc3b1256"/>
+			<device-support value="at32uc3a0512"/>
+			<device-support value="at32uc3a1512"/>
+			<device-support value="at32uc3b0512"/>
+			<device-support value="at32uc3b1512"/>
+		</device-alias-map>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml
index 9e17b188be..c2ef7af4c7 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_common.xml
@@ -1,34 +1,34 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="service" id="lufa.common" caption="LUFA Common Infrastructure">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<info type="gui-flag" value="hidden"/>

-			<build type="doxygen-entry-point" value="Group_Common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Version.h"/>

-			<build type="distribute" subtype="license" value="License.txt"/>

-

-			<build type="header-file" subtype="api" value="Common/Common.h"/>

-			<build type="header-file" value="Common/Architectures.h"/>

-			<build type="header-file" value="Common/ArchitectureSpecific.h"/>

-			<build type="header-file" value="Common/Attributes.h"/>

-			<build type="header-file" value="Common/BoardTypes.h"/>

-			<build type="header-file" value="Common/CompilerSpecific.h"/>

-			<build type="header-file" value="Common/Endianness.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="service" id="lufa.common" caption="LUFA Common Infrastructure">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<info type="gui-flag" value="hidden"/>
+			<build type="doxygen-entry-point" value="Group_Common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Version.h"/>
+			<build type="distribute" subtype="license" value="License.txt"/>
+
+			<build type="header-file" subtype="api" value="Common/Common.h"/>
+			<build type="header-file" value="Common/Architectures.h"/>
+			<build type="header-file" value="Common/ArchitectureSpecific.h"/>
+			<build type="header-file" value="Common/Attributes.h"/>
+			<build type="header-file" value="Common/BoardTypes.h"/>
+			<build type="header-file" value="Common/CompilerSpecific.h"/>
+			<build type="header-file" value="Common/Endianness.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml
index 3677d20036..e150aa6458 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board.xml
@@ -1,114 +1,114 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<board id="lufa.boards.dummy.avr8" vendor="LUFA" caption="AVR8 Architecture">

-			<device-support value="mega"/>

-

-			<require idref="lufa.drivers.board"/>

-			<require idref="lufa.drivers.board.info"/>

-		</board>

-

-		<board id="lufa.boards.dummy.xmega" vendor="LUFA" caption="XMEGA Architecture">

-			<device-support value="xmega"/>

-

-			<require idref="lufa.drivers.board"/>

-			<require idref="lufa.drivers.board.info"/>

-		</board>

-

-		<board id="lufa.boards.dummy.uc3" vendor="LUFA" caption="UC3 Architecture">

-			<device-support value="uc3"/>

-

-			<require idref="lufa.drivers.board"/>

-			<require idref="lufa.drivers.board.info"/>

-		</board>

-

-		<module type="driver" id="lufa.drivers.board.info" caption="LUFA Board Hardware Information Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_BoardInfo"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Board.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.leds" caption="LUFA Board LED Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_LEDs"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/LEDs.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.buttons" caption="LUFA Board Buttons Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Buttons"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Buttons.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.dataflash" caption="LUFA Board Dataflash Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Dataflash"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Dataflash.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.joystick" caption="LUFA Board Joystick Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Joystick"/>

-

-			<require idref="lufa.common"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Joystick.h"/>

-		</module>

-

-		<module type="driver" id="lufa.drivers.board.temperature" caption="LUFA Board Temperature Sensor Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Temperature"/>

-

-			<require idref="lufa.common"/>

-			<require idref="lufa.drivers.peripheral.adc"/>

-

-			<build type="c-source"     value="Drivers/Board/Temperature.c"/>

-			<build type="include-path" value=".."/>

-			<build type="header-file"  subtype="api" value="Drivers/Board/Temperature.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<board id="lufa.boards.dummy.avr8" vendor="LUFA" caption="AVR8 Architecture">
+			<device-support value="mega"/>
+
+			<require idref="lufa.drivers.board"/>
+			<require idref="lufa.drivers.board.info"/>
+		</board>
+
+		<board id="lufa.boards.dummy.xmega" vendor="LUFA" caption="XMEGA Architecture">
+			<device-support value="xmega"/>
+
+			<require idref="lufa.drivers.board"/>
+			<require idref="lufa.drivers.board.info"/>
+		</board>
+
+		<board id="lufa.boards.dummy.uc3" vendor="LUFA" caption="UC3 Architecture">
+			<device-support value="uc3"/>
+
+			<require idref="lufa.drivers.board"/>
+			<require idref="lufa.drivers.board.info"/>
+		</board>
+
+		<module type="driver" id="lufa.drivers.board.info" caption="LUFA Board Hardware Information Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_BoardInfo"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Board.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.leds" caption="LUFA Board LED Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_LEDs"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/LEDs.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.buttons" caption="LUFA Board Buttons Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Buttons"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Buttons.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.dataflash" caption="LUFA Board Dataflash Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Dataflash"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Dataflash.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.joystick" caption="LUFA Board Joystick Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Joystick"/>
+
+			<require idref="lufa.common"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Joystick.h"/>
+		</module>
+
+		<module type="driver" id="lufa.drivers.board.temperature" caption="LUFA Board Temperature Sensor Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Temperature"/>
+
+			<require idref="lufa.common"/>
+			<require idref="lufa.drivers.peripheral.adc"/>
+
+			<build type="c-source"     value="Drivers/Board/Temperature.c"/>
+			<build type="include-path" value=".."/>
+			<build type="header-file"  subtype="api" value="Drivers/Board/Temperature.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml
index 4b099920b7..ab7e03e4e9 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_board_names.xml
@@ -1,853 +1,853 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<select-by-config id="lufa.drivers.board" name="lufa.drivers.board.name" default="none" caption="LUFA Board Support">

-			<info type="description" value="summary">

-				Board hardware (LEDs, Buttons, etc.) drivers for the preconfigured LUFA boards. Note that only the boards

-				compatible with the currently selected device will be shown.

-

-				To disable all hardware drivers silently, use NONE. To supply customer drivers, use USER (see manual).

-			</info>

-

-			<module type="driver" id="lufa.drivers.board#none" caption="Board Support - None">

-				<device-support value="avr"/>

-				<build type="define" name="BOARD" value="BOARD_NONE"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#user" caption="Board Support - User Supplied">

-				<device-support value="avr"/>

-				<build type="define" name="BOARD" value="BOARD_USER"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#adafruit_u4" caption="Board Support - ADAFRUITU4">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_ADAFRUITU4"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_ADAFRUITU4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#atavrusbrf01" caption="Board Support - ATAVRUSBRF01">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_ATAVRUSBRF01"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_ATAVRUSBRF01"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#benito" caption="Board Support - BENITO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BENITO"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_BENITO"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BENITO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BENITO/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BENITO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#big_multio" caption="Board Support - BIGMULTIO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BIGMULTIO"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_BIGMULTIO"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#blackcat" caption="Board Support - BLACKCAT">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BLACKCAT"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_BLACKCAT"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#bui" caption="Board Support - BUI">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BUI"/>

-

-				<device-support value="at90usb646"/>

-				<build type="define" name="BOARD" value="BOARD_BUI"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BUI/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BUI/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#bumbleb" caption="Board Support - BUMBLEB">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_BUMBLEB"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_BUMBLEB"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.joystick"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#culv3" caption="Board Support - CULV3">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_CULV3"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_CULV3"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/CULV3/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/CULV3/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/CULV3/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#duce" caption="Board Support - DUCE">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_DUCE"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_DUCE"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/DUCE/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/DUCE/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#evk527" caption="Board Support - EVK527">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK527"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_EVK527"/>

-

-				<require idref="lufa.drivers.misc.at45db321c"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/EVK527/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#jm_db_u2" caption="Board Support - JMDBU2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_JMDBU2"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_JMDBU2"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#leonardo" caption="Board Support - LEONARDO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_LEONARDO"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_LEONARDO"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/LEONARDO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/LEONARDO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#maximus" caption="Board Support - MAXIMUS">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MAXIMUS"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_MAXIMUS"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_32u2" caption="Board Support - MICROPENDOUS_32U2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_32U2"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_32U2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_a" caption="Board Support - MICROPENDOUS_A">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_A"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_A"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_1" caption="Board Support - MICROPENDOUS_1">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_1"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_1"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_2" caption="Board Support - MICROPENDOUS_2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_2"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_2"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_3" caption="Board Support - MICROPENDOUS_3">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_3"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_3"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_4" caption="Board Support - MICROPENDOUS_4">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_4"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_4"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_dip" caption="Board Support - MICROPENDOUS_DIP">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_DIP"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_DIP"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_rev1" caption="Board Support - MICROPENDOUS_REV1">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV1"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV1"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#micropendous_rev2" caption="Board Support - MICROPENDOUS_REV2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV2"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#microsin_162" caption="Board Support - MICROSIN162">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROSIN162"/>

-

-				<device-support value="atmega162"/>

-				<build type="define" name="BOARD" value="BOARD_MICROSIN162"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#minimus" caption="Board Support - MINIMUS">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MINIMUS"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_MINIMUS"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#multio" caption="Board Support - MULTIO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MULTIO"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_MULTIO"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MULTIO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MULTIO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#olimex_162" caption="Board Support - OLIMEX162">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX162"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_OLIMEX162"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#olimex_32u4" caption="Board Support - OLIMEX32U4">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX32U4"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_OLIMEX32U4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#olimex_isp_mkii" caption="Board Support - OLIMEXISPMK2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXISPMK2"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_OLIMEXISPMK2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#olimex_t32u4" caption="Board Support - OLIMEX_T32U4">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXT32U4"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_OLIMEXT32U4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-				<require idref="lufa.drivers.board.buttons"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#rzusbstick" caption="Board Support - RZUSBSTICK">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_RZUSBSTICK"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_RZUSBSTICK"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#sparkfun_8u2" caption="Board Support - SPARKFUN8U2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_SPARKFUN8U2"/>

-

-				<device-support value="atmega8u2"/>

-				<build type="define" name="BOARD" value="BOARD_SPARKFUN8U2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#stk525" caption="Board Support - STK525">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_STK525"/>

-

-				<device-support value="at90usb1287"/>

-				<device-support value="at90usb1286"/>

-				<device-support value="at90usb647"/>

-				<device-support value="at90usb646"/>

-				<build type="define" name="BOARD" value="BOARD_STK525"/>

-

-				<require idref="lufa.drivers.misc.at45db321c"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK525/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#stk526" caption="Board Support - STK526">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_STK526"/>

-

-				<device-support value="at90usb162"/>

-				<device-support value="at90usb82"/>

-				<device-support value="atmega32u2"/>

-				<device-support value="atmega16u2"/>

-				<device-support value="atmega8u2"/>

-				<build type="define" name="BOARD" value="BOARD_STK526"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STK526/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#teensy" caption="Board Support - TEENSY">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_TEENSY"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#teensy2" caption="Board Support - TEENSY2">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY2"/>

-

-				<device-support value="at90usb646"/>

-				<build type="define" name="BOARD" value="BOARD_TEENSY2"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#tul" caption="Board Support - TUL">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_TUL"/>

-

-				<device-support value="atmega32u4"/>

-				<build type="define" name="BOARD" value="BOARD_TUL"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/TUL/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/TUL/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/TUL/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#udip" caption="Board Support - UDIP">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_UDIP"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_UDIP"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/UDIP/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/UDIP/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/UDIP/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#uno" caption="Board Support - UNO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_UNO"/>

-

-				<device-support value="atmega8u2"/>

-				<device-support value="atmega16u2"/>

-				<build type="define" name="BOARD" value="BOARD_UNO"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/UNO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/UNO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usb2ax" caption="Board Support - USB2AX">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_USB2AX"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usb2ax_v3" caption="Board Support - USB2AX_V3">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V3"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_USB2AX_V3"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usb2ax_v3_1" caption="Board Support - USB2AX_V31">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V31"/>

-

-				<device-support value="atmega32u2"/>

-				<build type="define" name="BOARD" value="BOARD_USB2AX_V31"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usbfoo" caption="Board Support - USBFOO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USBFOO"/>

-

-				<device-support value="atmega162"/>

-				<build type="define" name="BOARD" value="BOARD_USBFOO"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usbkey" caption="Board Support - USBKEY">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USBKEY"/>

-

-				<device-support value="at90usb1287"/>

-				<build type="define" name="BOARD" value="BOARD_USBKEY"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#usbtiny_mkii" caption="Board Support - USBTINYMKII">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_USBTINYMKII"/>

-

-				<device-support value="at90usb162"/>

-				<build type="define" name="BOARD" value="BOARD_USBTINYMKII"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/LEDs.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#xplain_rev1" caption="Board Support - XPLAIN (HW Rev 1)">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN_REV1"/>

-

-				<device-support value="at90usb1287"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_XPLAIN_REV1"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#xplain" caption="Board Support - XPLAIN (HW Rev 2+)">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN"/>

-

-				<device-support value="at90usb1287"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.spi"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_XPLAIN"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#a3bu_xplained" caption="Board Support - A3BU_XPLAINED">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_A3BU_XPLAINED"/>

-

-				<device-support value="atxmega256a3bu"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.usart_spi"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Board.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_A3BU_XPLAINED"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#b1_xplained" caption="Board Support - B1_XPLAINED">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_B1_XPLAINED"/>

-

-				<device-support value="atxmega128b1"/>

-

-				<require idref="lufa.drivers.misc.at45db642d"/>

-				<require idref="lufa.drivers.peripheral.usart_spi"/>

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.dataflash"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Board.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_B1_XPLAINED"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#evk1100" caption="Board Support - EVK1100">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1100"/>

-

-				<device-support value="at32uc3a0512"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Board.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1100/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_EVK1100"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#evk1101" caption="Board Support - EVK1101">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1101"/>

-

-				<device-support value="at32uc3b0256"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.joystick"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Board.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Joystick.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1101/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_EVK1101"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#evk1104" caption="Board Support - EVK1104">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1104"/>

-

-				<device-support value="at32uc3a3256"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/UC3/EVK1104/Board.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1104/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/EVK1104/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_EVK1104"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#uc3a3_xplained" caption="Board Support - UC3A3_XPLAINED">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_UC3_A3_XPLAINED"/>

-

-				<device-support value="at32uc3a3256"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Board.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_UC3A3_XPLAINED"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#stange_isp" caption="Board Support - STANGE_ISP">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_STANGE_ISP"/>

-

-				<device-support value="at90usb162"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_STANGE_ISP"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#c3_xplained" caption="Board Support - C3_XPLAINED">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_C3_XPLAINED"/>

-

-				<device-support value="atxmega384c3"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Board.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_C3_XPLAINED"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#u2s" caption="Board Support - U2S">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_U2S"/>

-

-				<device-support value="atmega32u2"/>

-

-				<require idref="lufa.drivers.board.buttons"/>

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/U2S/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/U2S/Buttons.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/U2S/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_U2S"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#yun" caption="Board Support - YUN">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_YUN"/>

-

-				<device-support value="atmega32u4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/YUN/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/YUN/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_YUN"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.board#yun" caption="Board Support - MICRO">

-				<build type="doxygen-entry-point" value="Group_BoardInfo_MICRO"/>

-

-				<device-support value="atmega32u4"/>

-

-				<require idref="lufa.drivers.board.leds"/>

-

-				<build type="header-file" value="Drivers/Board/AVR8/MICRO/Board.h"/>

-				<build type="header-file" value="Drivers/Board/AVR8/MICRO/LEDs.h"/>

-

-				<build type="define" name="BOARD" value="BOARD_MICRO"/>

-			</module>

-		</select-by-config>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<select-by-config id="lufa.drivers.board" name="lufa.drivers.board.name" default="none" caption="LUFA Board Support">
+			<info type="description" value="summary">
+				Board hardware (LEDs, Buttons, etc.) drivers for the preconfigured LUFA boards. Note that only the boards
+				compatible with the currently selected device will be shown.
+
+				To disable all hardware drivers silently, use NONE. To supply customer drivers, use USER (see manual).
+			</info>
+
+			<module type="driver" id="lufa.drivers.board#none" caption="Board Support - None">
+				<device-support value="avr"/>
+				<build type="define" name="BOARD" value="BOARD_NONE"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#user" caption="Board Support - User Supplied">
+				<device-support value="avr"/>
+				<build type="define" name="BOARD" value="BOARD_USER"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#adafruit_u4" caption="Board Support - ADAFRUITU4">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_ADAFRUITU4"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_ADAFRUITU4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/ADAFRUITU4/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#atavrusbrf01" caption="Board Support - ATAVRUSBRF01">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_ATAVRUSBRF01"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_ATAVRUSBRF01"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#benito" caption="Board Support - BENITO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BENITO"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_BENITO"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BENITO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BENITO/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BENITO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#big_multio" caption="Board Support - BIGMULTIO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BIGMULTIO"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_BIGMULTIO"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BIGMULTIO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#blackcat" caption="Board Support - BLACKCAT">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BLACKCAT"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_BLACKCAT"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BLACKCAT/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#bui" caption="Board Support - BUI">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BUI"/>
+
+				<device-support value="at90usb646"/>
+				<build type="define" name="BOARD" value="BOARD_BUI"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BUI/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BUI/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#bumbleb" caption="Board Support - BUMBLEB">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_BUMBLEB"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_BUMBLEB"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.joystick"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/BUMBLEB/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#culv3" caption="Board Support - CULV3">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_CULV3"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_CULV3"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/CULV3/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/CULV3/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/CULV3/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#duce" caption="Board Support - DUCE">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_DUCE"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_DUCE"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/DUCE/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/DUCE/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#evk527" caption="Board Support - EVK527">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK527"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_EVK527"/>
+
+				<require idref="lufa.drivers.misc.at45db321c"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/EVK527/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#jm_db_u2" caption="Board Support - JMDBU2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_JMDBU2"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_JMDBU2"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/JMDBU2/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#leonardo" caption="Board Support - LEONARDO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_LEONARDO"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_LEONARDO"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/LEONARDO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/LEONARDO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#maximus" caption="Board Support - MAXIMUS">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MAXIMUS"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_MAXIMUS"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MAXIMUS/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_32u2" caption="Board Support - MICROPENDOUS_32U2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_32U2"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_32U2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_a" caption="Board Support - MICROPENDOUS_A">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_A"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_A"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_1" caption="Board Support - MICROPENDOUS_1">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_1"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_1"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_2" caption="Board Support - MICROPENDOUS_2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_2"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_2"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_3" caption="Board Support - MICROPENDOUS_3">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_3"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_3"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_4" caption="Board Support - MICROPENDOUS_4">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_4"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_4"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_dip" caption="Board Support - MICROPENDOUS_DIP">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_DIP"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_DIP"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_rev1" caption="Board Support - MICROPENDOUS_REV1">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV1"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV1"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#micropendous_rev2" caption="Board Support - MICROPENDOUS_REV2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROPENDOUS_REV2"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_MICROPENDOUS_REV2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROPENDOUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#microsin_162" caption="Board Support - MICROSIN162">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICROSIN162"/>
+
+				<device-support value="atmega162"/>
+				<build type="define" name="BOARD" value="BOARD_MICROSIN162"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICROSIN162/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#minimus" caption="Board Support - MINIMUS">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MINIMUS"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_MINIMUS"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MINIMUS/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#multio" caption="Board Support - MULTIO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MULTIO"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_MULTIO"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MULTIO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MULTIO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#olimex_162" caption="Board Support - OLIMEX162">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX162"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_OLIMEX162"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX162/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#olimex_32u4" caption="Board Support - OLIMEX32U4">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEX32U4"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_OLIMEX32U4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEX32U4/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#olimex_isp_mkii" caption="Board Support - OLIMEXISPMK2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXISPMK2"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_OLIMEXISPMK2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#olimex_t32u4" caption="Board Support - OLIMEX_T32U4">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_OLIMEXT32U4"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_OLIMEXT32U4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+				<require idref="lufa.drivers.board.buttons"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#rzusbstick" caption="Board Support - RZUSBSTICK">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_RZUSBSTICK"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_RZUSBSTICK"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/RZUSBSTICK/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#sparkfun_8u2" caption="Board Support - SPARKFUN8U2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_SPARKFUN8U2"/>
+
+				<device-support value="atmega8u2"/>
+				<build type="define" name="BOARD" value="BOARD_SPARKFUN8U2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#stk525" caption="Board Support - STK525">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_STK525"/>
+
+				<device-support value="at90usb1287"/>
+				<device-support value="at90usb1286"/>
+				<device-support value="at90usb647"/>
+				<device-support value="at90usb646"/>
+				<build type="define" name="BOARD" value="BOARD_STK525"/>
+
+				<require idref="lufa.drivers.misc.at45db321c"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK525/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#stk526" caption="Board Support - STK526">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_STK526"/>
+
+				<device-support value="at90usb162"/>
+				<device-support value="at90usb82"/>
+				<device-support value="atmega32u2"/>
+				<device-support value="atmega16u2"/>
+				<device-support value="atmega8u2"/>
+				<build type="define" name="BOARD" value="BOARD_STK526"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STK526/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#teensy" caption="Board Support - TEENSY">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_TEENSY"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#teensy2" caption="Board Support - TEENSY2">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_TEENSY2"/>
+
+				<device-support value="at90usb646"/>
+				<build type="define" name="BOARD" value="BOARD_TEENSY2"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/TEENSY/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#tul" caption="Board Support - TUL">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_TUL"/>
+
+				<device-support value="atmega32u4"/>
+				<build type="define" name="BOARD" value="BOARD_TUL"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/TUL/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/TUL/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/TUL/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#udip" caption="Board Support - UDIP">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_UDIP"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_UDIP"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/UDIP/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/UDIP/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/UDIP/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#uno" caption="Board Support - UNO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_UNO"/>
+
+				<device-support value="atmega8u2"/>
+				<device-support value="atmega16u2"/>
+				<build type="define" name="BOARD" value="BOARD_UNO"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/UNO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/UNO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usb2ax" caption="Board Support - USB2AX">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_USB2AX"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usb2ax_v3" caption="Board Support - USB2AX_V3">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V3"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_USB2AX_V3"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usb2ax_v3_1" caption="Board Support - USB2AX_V31">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USB2AX_V31"/>
+
+				<device-support value="atmega32u2"/>
+				<build type="define" name="BOARD" value="BOARD_USB2AX_V31"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USB2AX/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usbfoo" caption="Board Support - USBFOO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USBFOO"/>
+
+				<device-support value="atmega162"/>
+				<build type="define" name="BOARD" value="BOARD_USBFOO"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBFOO/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usbkey" caption="Board Support - USBKEY">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USBKEY"/>
+
+				<device-support value="at90usb1287"/>
+				<build type="define" name="BOARD" value="BOARD_USBKEY"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBKEY/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#usbtiny_mkii" caption="Board Support - USBTINYMKII">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_USBTINYMKII"/>
+
+				<device-support value="at90usb162"/>
+				<build type="define" name="BOARD" value="BOARD_USBTINYMKII"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/USBTINYMKII/LEDs.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#xplain_rev1" caption="Board Support - XPLAIN (HW Rev 1)">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN_REV1"/>
+
+				<device-support value="at90usb1287"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_XPLAIN_REV1"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#xplain" caption="Board Support - XPLAIN (HW Rev 2+)">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_XPLAIN"/>
+
+				<device-support value="at90usb1287"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.spi"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/XPLAIN/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_XPLAIN"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#a3bu_xplained" caption="Board Support - A3BU_XPLAINED">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_A3BU_XPLAINED"/>
+
+				<device-support value="atxmega256a3bu"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.usart_spi"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Board.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_A3BU_XPLAINED"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#b1_xplained" caption="Board Support - B1_XPLAINED">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_B1_XPLAINED"/>
+
+				<device-support value="atxmega128b1"/>
+
+				<require idref="lufa.drivers.misc.at45db642d"/>
+				<require idref="lufa.drivers.peripheral.usart_spi"/>
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.dataflash"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Board.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_B1_XPLAINED"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#evk1100" caption="Board Support - EVK1100">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1100"/>
+
+				<device-support value="at32uc3a0512"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Board.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1100/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1100/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_EVK1100"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#evk1101" caption="Board Support - EVK1101">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1101"/>
+
+				<device-support value="at32uc3b0256"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.joystick"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Board.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1101/Joystick.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1101/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_EVK1101"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#evk1104" caption="Board Support - EVK1104">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_EVK1104"/>
+
+				<device-support value="at32uc3a3256"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/UC3/EVK1104/Board.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1104/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/EVK1104/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_EVK1104"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#uc3a3_xplained" caption="Board Support - UC3A3_XPLAINED">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_UC3_A3_XPLAINED"/>
+
+				<device-support value="at32uc3a3256"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Board.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/UC3/UC3A3_XPLAINED/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_UC3A3_XPLAINED"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#stange_isp" caption="Board Support - STANGE_ISP">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_STANGE_ISP"/>
+
+				<device-support value="at90usb162"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/STANGE_ISP/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_STANGE_ISP"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#c3_xplained" caption="Board Support - C3_XPLAINED">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_C3_XPLAINED"/>
+
+				<device-support value="atxmega384c3"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Board.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/XMEGA/C3_XPLAINED/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_C3_XPLAINED"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#u2s" caption="Board Support - U2S">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_U2S"/>
+
+				<device-support value="atmega32u2"/>
+
+				<require idref="lufa.drivers.board.buttons"/>
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/U2S/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/U2S/Buttons.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/U2S/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_U2S"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#yun" caption="Board Support - YUN">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_YUN"/>
+
+				<device-support value="atmega32u4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/YUN/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/YUN/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_YUN"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.board#yun" caption="Board Support - MICRO">
+				<build type="doxygen-entry-point" value="Group_BoardInfo_MICRO"/>
+
+				<device-support value="atmega32u4"/>
+
+				<require idref="lufa.drivers.board.leds"/>
+
+				<build type="header-file" value="Drivers/Board/AVR8/MICRO/Board.h"/>
+				<build type="header-file" value="Drivers/Board/AVR8/MICRO/LEDs.h"/>
+
+				<build type="define" name="BOARD" value="BOARD_MICRO"/>
+			</module>
+		</select-by-config>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml
index 8680ca2dff..4311ae87b7 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_misc.xml
@@ -1,57 +1,57 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="component" id="lufa.drivers.misc.at45db321c" caption="LUFA AT45DB321C Dataflash Commands">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_AT45DB321C"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/Misc/AT45DB321C.h"/>

-		</module>

-

-		<module type="component" id="lufa.drivers.misc.at45db642d" caption="LUFA AT45DB642D Dataflash Commands">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_AT45DB321C"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/Misc/AT45DB642D.h"/>

-		</module>

-

-		<module type="service" id="lufa.drivers.misc.ringbuffer" caption="LUFA Ring Buffer">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_RingBuff"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/Misc/RingBuffer.h"/>

-		</module>

-

-		<module type="service" id="lufa.drivers.misc.ansi" caption="LUFA ANSI Terminal Commands">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_Terminal"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/Misc/TerminalCodes.h"/>

-		</module>

-	</asf>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="component" id="lufa.drivers.misc.at45db321c" caption="LUFA AT45DB321C Dataflash Commands">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_AT45DB321C"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/Misc/AT45DB321C.h"/>
+		</module>
+
+		<module type="component" id="lufa.drivers.misc.at45db642d" caption="LUFA AT45DB642D Dataflash Commands">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_AT45DB321C"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/Misc/AT45DB642D.h"/>
+		</module>
+
+		<module type="service" id="lufa.drivers.misc.ringbuffer" caption="LUFA Ring Buffer">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_RingBuff"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/Misc/RingBuffer.h"/>
+		</module>
+
+		<module type="service" id="lufa.drivers.misc.ansi" caption="LUFA ANSI Terminal Commands">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_Terminal"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/Misc/TerminalCodes.h"/>
+		</module>
+	</asf>
 </lufa>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml
index 3a982e565f..76ea516dbc 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_peripheral.xml
@@ -1,198 +1,198 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<select-by-device id="lufa.drivers.peripheral.usart" caption="LUFA USART Driver">

-			<module type="driver" id="lufa.drivers.peripheral.usart#avr8" caption="LUFA USART Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_Serial"/>

-

-				<require idref="lufa.common"/>

-				<require idref="lufa.drivers.misc.ansi"/>

-

-				<build type="c-source" value="Drivers/Peripheral/AVR8/Serial_AVR8.c"/>

-				<build type="header-file" value="Drivers/Peripheral/AVR8/Serial_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.usart#xmega" caption="LUFA USART Driver - AVR8">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_Serial"/>

-

-				<require idref="lufa.common"/>

-				<require idref="lufa.drivers.misc.ansi"/>

-

-				<build type="c-source" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.c"/>

-				<build type="header-file" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.usart#uc3" caption="LUFA USART Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_Serial"/>

-

-				<require idref="lufa.common"/>

-				<require idref="lufa.drivers.misc.ansi"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-

-		<select-by-device id="lufa.drivers.peripheral.spi" caption="LUFA SPI Driver">

-			<module type="driver" id="lufa.drivers.peripheral.spi#avr8" caption="LUFA SPI Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_SPI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/AVR8/SPI_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.spi#xmega" caption="LUFA SPI Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_SPI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/XMEGA/SPI_XMEGA.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.spi#uc3" caption="LUFA SPI Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_SPI"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-

-		<select-by-device id="lufa.drivers.peripheral.usart_spi" caption="LUFA USART SPI Driver">

-			<module type="driver" id="lufa.drivers.peripheral.usart_spi#avr8" caption="LUFA USART SPI Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_SerialSPI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/AVR8/SerialSPI_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api"  value="Drivers/Peripheral/SerialSPI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.usart_spi#xmega" caption="LUFA USART SPI Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_SerialSPI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/SerialSPI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.usart_spi#uc3" caption="LUFA USART SPI Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_SerialSPI"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-

-		<select-by-device id="lufa.drivers.peripheral.twi" caption="LUFA TWI Master Driver">

-			<module type="driver" id="lufa.drivers.peripheral.twi#avr8" caption="LUFA TWI Master Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_TWI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="c-source" value="Drivers/Peripheral/AVR8/TWI_AVR8.c"/>

-				<build type="header-file" value="Drivers/Peripheral/AVR8/TWI_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.twi#xmega" caption="LUFA TWI Master Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_TWI"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="c-source" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.c"/>

-				<build type="header-file" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.twi#uc3" caption="LUFA TWI Master Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_TWI"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-

-		<select-by-device id="lufa.drivers.peripheral.adc" caption="LUFA ADC Driver">

-			<module type="driver" id="lufa.drivers.peripheral.adc#avr8" caption="LUFA ADC Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="doxygen-entry-point" value="Group_ADC"/>

-

-				<require idref="lufa.common"/>

-

-				<build type="header-file" value="Drivers/Peripheral/AVR8/ADC_AVR8.h"/>

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Drivers/Peripheral/ADC.h"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.adc#xmega" caption="LUFA ADC Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="doxygen-entry-point" value="Group_ADC"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.peripheral.adc#uc3" caption="LUFA ADC Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="doxygen-entry-point" value="Group_ADC"/>

-

-				<require idref="lufa.common"/>

-

-				<info type="gui-flag" value="hidden"/>

-			</module>

-		</select-by-device>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<select-by-device id="lufa.drivers.peripheral.usart" caption="LUFA USART Driver">
+			<module type="driver" id="lufa.drivers.peripheral.usart#avr8" caption="LUFA USART Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_Serial"/>
+
+				<require idref="lufa.common"/>
+				<require idref="lufa.drivers.misc.ansi"/>
+
+				<build type="c-source" value="Drivers/Peripheral/AVR8/Serial_AVR8.c"/>
+				<build type="header-file" value="Drivers/Peripheral/AVR8/Serial_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.usart#xmega" caption="LUFA USART Driver - AVR8">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_Serial"/>
+
+				<require idref="lufa.common"/>
+				<require idref="lufa.drivers.misc.ansi"/>
+
+				<build type="c-source" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.c"/>
+				<build type="header-file" value="Drivers/Peripheral/XMEGA/Serial_XMEGA.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/Serial.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.usart#uc3" caption="LUFA USART Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_Serial"/>
+
+				<require idref="lufa.common"/>
+				<require idref="lufa.drivers.misc.ansi"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+
+		<select-by-device id="lufa.drivers.peripheral.spi" caption="LUFA SPI Driver">
+			<module type="driver" id="lufa.drivers.peripheral.spi#avr8" caption="LUFA SPI Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_SPI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/AVR8/SPI_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.spi#xmega" caption="LUFA SPI Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_SPI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/XMEGA/SPI_XMEGA.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/SPI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.spi#uc3" caption="LUFA SPI Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_SPI"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+
+		<select-by-device id="lufa.drivers.peripheral.usart_spi" caption="LUFA USART SPI Driver">
+			<module type="driver" id="lufa.drivers.peripheral.usart_spi#avr8" caption="LUFA USART SPI Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_SerialSPI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/AVR8/SerialSPI_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api"  value="Drivers/Peripheral/SerialSPI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.usart_spi#xmega" caption="LUFA USART SPI Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_SerialSPI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/SerialSPI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.usart_spi#uc3" caption="LUFA USART SPI Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_SerialSPI"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+
+		<select-by-device id="lufa.drivers.peripheral.twi" caption="LUFA TWI Master Driver">
+			<module type="driver" id="lufa.drivers.peripheral.twi#avr8" caption="LUFA TWI Master Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_TWI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="c-source" value="Drivers/Peripheral/AVR8/TWI_AVR8.c"/>
+				<build type="header-file" value="Drivers/Peripheral/AVR8/TWI_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.twi#xmega" caption="LUFA TWI Master Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_TWI"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="c-source" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.c"/>
+				<build type="header-file" value="Drivers/Peripheral/XMEGA/TWI_XMEGA.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/TWI.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.twi#uc3" caption="LUFA TWI Master Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_TWI"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+
+		<select-by-device id="lufa.drivers.peripheral.adc" caption="LUFA ADC Driver">
+			<module type="driver" id="lufa.drivers.peripheral.adc#avr8" caption="LUFA ADC Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="doxygen-entry-point" value="Group_ADC"/>
+
+				<require idref="lufa.common"/>
+
+				<build type="header-file" value="Drivers/Peripheral/AVR8/ADC_AVR8.h"/>
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Drivers/Peripheral/ADC.h"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.adc#xmega" caption="LUFA ADC Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="doxygen-entry-point" value="Group_ADC"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.peripheral.adc#uc3" caption="LUFA ADC Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="doxygen-entry-point" value="Group_ADC"/>
+
+				<require idref="lufa.common"/>
+
+				<info type="gui-flag" value="hidden"/>
+			</module>
+		</select-by-device>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml
index 7ff4b39492..263c411dff 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb.xml
@@ -1,32 +1,32 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb" caption="LUFA USB Driver">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_USB"/>

-

-			<build type="define" name="USE_LUFA_CONFIG_HEADER" value=""/>

-			<build type="module-config" subtype="path" value="CodeTemplates"/>

-			<build type="module-config" subtype="required-header-file" value="LUFAConfig.h"/>

-

-			<build type="include-path" value=".."/>

-			<build type="header-file" subtype="api" value="Drivers/USB/USB.h"/>

-

-			<require idref="lufa.common"/>

-			<require idref="lufa.drivers.usb.class"/>

-			<require idref="lufa.drivers.usb.core"/>

-		</module>

-	</asf>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb" caption="LUFA USB Driver">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_USB"/>
+
+			<build type="define" name="USE_LUFA_CONFIG_HEADER" value=""/>
+			<build type="module-config" subtype="path" value="CodeTemplates"/>
+			<build type="module-config" subtype="required-header-file" value="LUFAConfig.h"/>
+
+			<build type="include-path" value=".."/>
+			<build type="header-file" subtype="api" value="Drivers/USB/USB.h"/>
+
+			<require idref="lufa.common"/>
+			<require idref="lufa.drivers.usb.class"/>
+			<require idref="lufa.drivers.usb.core"/>
+		</module>
+	</asf>
 </lufa>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml
index cd18bf10e7..67ab760d33 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_class.xml
@@ -1,32 +1,32 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="service" id="lufa.drivers.usb.class" caption="LUFA USB Class Drivers">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<info type="gui-flag" value="hidden"/>

-			<build type="doxygen-entry-point" value="Group_USBClassDrivers"/>

-

-			<require idref="lufa.drivers.usb.class.android"/>

-			<require idref="lufa.drivers.usb.class.audio"/>

-			<require idref="lufa.drivers.usb.class.cdc"/>

-			<require idref="lufa.drivers.usb.class.hid"/>

-			<require idref="lufa.drivers.usb.class.ms"/>

-			<require idref="lufa.drivers.usb.class.midi"/>

-			<require idref="lufa.drivers.usb.class.printer"/>

-			<require idref="lufa.drivers.usb.class.rndis"/>

-			<require idref="lufa.drivers.usb.class.si"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="service" id="lufa.drivers.usb.class" caption="LUFA USB Class Drivers">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<info type="gui-flag" value="hidden"/>
+			<build type="doxygen-entry-point" value="Group_USBClassDrivers"/>
+
+			<require idref="lufa.drivers.usb.class.android"/>
+			<require idref="lufa.drivers.usb.class.audio"/>
+			<require idref="lufa.drivers.usb.class.cdc"/>
+			<require idref="lufa.drivers.usb.class.hid"/>
+			<require idref="lufa.drivers.usb.class.ms"/>
+			<require idref="lufa.drivers.usb.class.midi"/>
+			<require idref="lufa.drivers.usb.class.printer"/>
+			<require idref="lufa.drivers.usb.class.rndis"/>
+			<require idref="lufa.drivers.usb.class.si"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml
index 58f8917ef4..58a0b388f6 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core.xml
@@ -1,85 +1,85 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb.core.common" caption="LUFA USB Core Driver - Common">

-			<device-support-alias value="lufa_avr8"/>

-			<device-support-alias value="lufa_xmega"/>

-			<device-support-alias value="lufa_uc3"/>

-

-			<build type="doxygen-entry-point" value="Group_USBManagement"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="header-file" value="Drivers/USB/Core/Device.h"/>

-			<build type="header-file" value="Drivers/USB/Core/Endpoint.h"/>

-			<build type="header-file" value="Drivers/USB/Core/Host.h"/>

-			<build type="header-file" value="Drivers/USB/Core/Pipe.h"/>

-			<build type="header-file" value="Drivers/USB/Core/OTG.h"/>

-			<build type="header-file" value="Drivers/USB/Core/USBController.h"/>

-			<build type="header-file" value="Drivers/USB/Core/USBInterrupt.h"/>

-			<build type="header-file" value="Drivers/USB/Core/EndpointStream.h"/>

-			<build type="header-file" value="Drivers/USB/Core/PipeStream.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/ConfigDescriptors.c"/>

-			<build type="header-file" value="Drivers/USB/Core/ConfigDescriptors.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/DeviceStandardReq.c"/>

-			<build type="header-file" value="Drivers/USB/Core/DeviceStandardReq.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/Events.c"/>

-			<build type="header-file" value="Drivers/USB/Core/Events.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/HostStandardReq.c"/>

-			<build type="header-file" value="Drivers/USB/Core/HostStandardReq.h"/>

-	        <build type="c-source"    value="Drivers/USB/Core/USBTask.c"/>

-			<build type="header-file" value="Drivers/USB/Core/USBTask.h"/>

-			<build type="header-file" value="Drivers/USB/Core/USBMode.h"/>

-			<build type="header-file" value="Drivers/USB/Core/StdDescriptors.h"/>

-			<build type="header-file" value="Drivers/USB/Core/StdRequestType.h"/>

-

-	        <build type="c-source"    value="Drivers/USB/Class/Common/HIDParser.c"/>

-	        <build type="header-file" value="Drivers/USB/Class/Common/HIDParser.h"/>

-	        <build type="header-file" value="Drivers/USB/Class/Common/HIDReportData.h"/>

-	    </module>

-

-		<select-by-device id="lufa.drivers.usb.core" caption="LUFA USB Core Driver">

-			<module type="driver" id="lufa.drivers.usb.core#avr8" caption="LUFA USB Core Driver - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<info type="gui-flag" value="hidden"/>

-

-				<build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>

-

-				<require idref="lufa.drivers.usb.core.common"/>

-				<require idref="lufa.drivers.usb.core.avr8"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.usb.core#xmega" caption="LUFA USB Core Driver - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<info type="gui-flag" value="hidden"/>

-

-				<build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>

-

-				<require idref="lufa.drivers.usb.core.common"/>

-				<require idref="lufa.drivers.usb.core.xmega"/>

-			</module>

-

-			<module type="driver" id="lufa.drivers.usb.core#uc3" caption="LUFA USB Core Driver - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<info type="gui-flag" value="hidden"/>

-

-				<build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>

-

-				<require idref="lufa.drivers.usb.core.common"/>

-				<require idref="lufa.drivers.usb.core.uc3"/>

-			</module>

-		</select-by-device>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb.core.common" caption="LUFA USB Core Driver - Common">
+			<device-support-alias value="lufa_avr8"/>
+			<device-support-alias value="lufa_xmega"/>
+			<device-support-alias value="lufa_uc3"/>
+
+			<build type="doxygen-entry-point" value="Group_USBManagement"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="header-file" value="Drivers/USB/Core/Device.h"/>
+			<build type="header-file" value="Drivers/USB/Core/Endpoint.h"/>
+			<build type="header-file" value="Drivers/USB/Core/Host.h"/>
+			<build type="header-file" value="Drivers/USB/Core/Pipe.h"/>
+			<build type="header-file" value="Drivers/USB/Core/OTG.h"/>
+			<build type="header-file" value="Drivers/USB/Core/USBController.h"/>
+			<build type="header-file" value="Drivers/USB/Core/USBInterrupt.h"/>
+			<build type="header-file" value="Drivers/USB/Core/EndpointStream.h"/>
+			<build type="header-file" value="Drivers/USB/Core/PipeStream.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/ConfigDescriptors.c"/>
+			<build type="header-file" value="Drivers/USB/Core/ConfigDescriptors.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/DeviceStandardReq.c"/>
+			<build type="header-file" value="Drivers/USB/Core/DeviceStandardReq.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/Events.c"/>
+			<build type="header-file" value="Drivers/USB/Core/Events.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/HostStandardReq.c"/>
+			<build type="header-file" value="Drivers/USB/Core/HostStandardReq.h"/>
+	        <build type="c-source"    value="Drivers/USB/Core/USBTask.c"/>
+			<build type="header-file" value="Drivers/USB/Core/USBTask.h"/>
+			<build type="header-file" value="Drivers/USB/Core/USBMode.h"/>
+			<build type="header-file" value="Drivers/USB/Core/StdDescriptors.h"/>
+			<build type="header-file" value="Drivers/USB/Core/StdRequestType.h"/>
+
+	        <build type="c-source"    value="Drivers/USB/Class/Common/HIDParser.c"/>
+	        <build type="header-file" value="Drivers/USB/Class/Common/HIDParser.h"/>
+	        <build type="header-file" value="Drivers/USB/Class/Common/HIDReportData.h"/>
+	    </module>
+
+		<select-by-device id="lufa.drivers.usb.core" caption="LUFA USB Core Driver">
+			<module type="driver" id="lufa.drivers.usb.core#avr8" caption="LUFA USB Core Driver - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<info type="gui-flag" value="hidden"/>
+
+				<build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>
+
+				<require idref="lufa.drivers.usb.core.common"/>
+				<require idref="lufa.drivers.usb.core.avr8"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.usb.core#xmega" caption="LUFA USB Core Driver - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<info type="gui-flag" value="hidden"/>
+
+				<build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>
+
+				<require idref="lufa.drivers.usb.core.common"/>
+				<require idref="lufa.drivers.usb.core.xmega"/>
+			</module>
+
+			<module type="driver" id="lufa.drivers.usb.core#uc3" caption="LUFA USB Core Driver - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<info type="gui-flag" value="hidden"/>
+
+				<build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>
+
+				<require idref="lufa.drivers.usb.core.common"/>
+				<require idref="lufa.drivers.usb.core.uc3"/>
+			</module>
+		</select-by-device>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml
index 166b9257aa..4688f05f91 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_avr8.xml
@@ -1,43 +1,43 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb.core.avr8" caption="LUFA USB Core Driver for AVR8">

-			<device-support-alias value="lufa_avr8"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>

-

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Device_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/Device_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Endpoint_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/Endpoint_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Host_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/Host_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/Pipe_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/Pipe_AVR8.h"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/OTG_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/USBController_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/USBController_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/AVR8/PipeStream_AVR8.c"/>

-			<build type="header-file" value="Drivers/USB/Core/AVR8/PipeStream_AVR8.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb.core.avr8" caption="LUFA USB Core Driver for AVR8">
+			<device-support-alias value="lufa_avr8"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_USBManagement_AVR8"/>
+
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Device_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/Device_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Endpoint_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/Endpoint_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Host_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/Host_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/Pipe_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/Pipe_AVR8.h"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/OTG_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/USBController_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/USBController_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/EndpointStream_AVR8.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/AVR8/PipeStream_AVR8.c"/>
+			<build type="header-file" value="Drivers/USB/Core/AVR8/PipeStream_AVR8.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml
index 7e0540cda7..2e7185f24a 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_uc3.xml
@@ -1,42 +1,42 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb.core.uc3" caption="LUFA USB Core Driver for UC3">

-			<device-support-alias value="lufa_uc3"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>

-

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Device_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/Device_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Endpoint_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/Endpoint_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Host_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/Host_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/Pipe_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/Pipe_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/USBController_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/USBController_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/USBInterrupt_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/USBInterrupt_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/EndpointStream_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/EndpointStream_UC3.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/UC3/PipeStream_UC3.c"/>

-			<build type="header-file" value="Drivers/USB/Core/UC3/PipeStream_UC3.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb.core.uc3" caption="LUFA USB Core Driver for UC3">
+			<device-support-alias value="lufa_uc3"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_USBManagement_UC3"/>
+
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Device_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/Device_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Endpoint_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/Endpoint_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Host_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/Host_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/Pipe_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/Pipe_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/USBController_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/USBController_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/USBInterrupt_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/USBInterrupt_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/EndpointStream_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/EndpointStream_UC3.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/UC3/PipeStream_UC3.c"/>
+			<build type="header-file" value="Drivers/USB/Core/UC3/PipeStream_UC3.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml
index 9e9f4f6a1d..c79a0f5b52 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_drivers_usb_core_xmega.xml
@@ -1,36 +1,36 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.drivers.usb.core.xmega" caption="LUFA USB Core Driver for XMEGA">

-			<device-support-alias value="lufa_xmega"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>

-

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Device_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/Device_XMEGA.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Pipe_XMEGA.c"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/USBController_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/USBController_XMEGA.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h"/>

-			<build type="c-source"    value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c"/>

-			<build type="header-file" value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.drivers.usb.core.xmega" caption="LUFA USB Core Driver for XMEGA">
+			<device-support-alias value="lufa_xmega"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_USBManagement_XMEGA"/>
+
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Device_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/Device_XMEGA.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/Pipe_XMEGA.c"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/USBController_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/USBController_XMEGA.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h"/>
+			<build type="c-source"    value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c"/>
+			<build type="header-file" value="Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml
index 02c7463ee5..4ee51f6ee0 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform.xml
@@ -1,60 +1,60 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<select-by-device id="lufa.platform" caption="LUFA Platform Specific Support">

-			<module type="service" id="lufa.platform#avr8" caption="LUFA Platform Specific Support - AVR8">

-				<device-support-alias value="lufa_avr8"/>

-

-				<build type="define" name="ARCH" value="ARCH_AVR8"/>

-

-				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>

-

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Platform/Platform.h"/>

-

-				<require idref="lufa.common"/>

-			</module>

-

-			<module type="service" id="lufa.platform#xmega" caption="LUFA Platform Specific Support - XMEGA">

-				<device-support-alias value="lufa_xmega"/>

-

-				<build type="define" name="ARCH" value="ARCH_XMEGA"/>

-

-				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>

-

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Platform/Platform.h"/>

-

-				<build type="distribute" value="Platform/XMEGA/XMEGAExperimentalInfo.txt" subtype="license"/>

-

-				<require idref="lufa.platform.xmega"/>

-				<require idref="lufa.common"/>

-			</module>

-

-			<module type="service" id="lufa.platform#uc3" caption="LUFA Platform Specific Support - UC3">

-				<device-support-alias value="lufa_uc3"/>

-

-				<build type="define" name="ARCH" value="ARCH_UC3"/>

-

-				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>

-

-				<build type="include-path" value=".."/>

-				<build type="header-file" subtype="api" value="Platform/Platform.h"/>

-

-				<build type="distribute" value="Platform/UC3/UC3ExperimentalInfo.txt" subtype="license"/>

-

-				<require idref="lufa.platform.uc3"/>

-				<require idref="lufa.common"/>

-			</module>

-		</select-by-device>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<select-by-device id="lufa.platform" caption="LUFA Platform Specific Support">
+			<module type="service" id="lufa.platform#avr8" caption="LUFA Platform Specific Support - AVR8">
+				<device-support-alias value="lufa_avr8"/>
+
+				<build type="define" name="ARCH" value="ARCH_AVR8"/>
+
+				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
+
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Platform/Platform.h"/>
+
+				<require idref="lufa.common"/>
+			</module>
+
+			<module type="service" id="lufa.platform#xmega" caption="LUFA Platform Specific Support - XMEGA">
+				<device-support-alias value="lufa_xmega"/>
+
+				<build type="define" name="ARCH" value="ARCH_XMEGA"/>
+
+				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
+
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Platform/Platform.h"/>
+
+				<build type="distribute" value="Platform/XMEGA/XMEGAExperimentalInfo.txt" subtype="license"/>
+
+				<require idref="lufa.platform.xmega"/>
+				<require idref="lufa.common"/>
+			</module>
+
+			<module type="service" id="lufa.platform#uc3" caption="LUFA Platform Specific Support - UC3">
+				<device-support-alias value="lufa_uc3"/>
+
+				<build type="define" name="ARCH" value="ARCH_UC3"/>
+
+				<build type="doxygen-entry-point" value="Group_PlatformDrivers"/>
+
+				<build type="include-path" value=".."/>
+				<build type="header-file" subtype="api" value="Platform/Platform.h"/>
+
+				<build type="distribute" value="Platform/UC3/UC3ExperimentalInfo.txt" subtype="license"/>
+
+				<require idref="lufa.platform.uc3"/>
+				<require idref="lufa.common"/>
+			</module>
+		</select-by-device>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml
index a488c4b83d..98017b08ad 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_uc3.xml
@@ -1,26 +1,26 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<module type="driver" id="lufa.platform.uc3" caption="LUFA UC3 Platform Drivers">

-			<device-support-alias value="lufa_uc3"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_PlatformDrivers_UC3"/>

-

-			<build type="header-file" value="Platform/UC3/ClockManagement.h"/>

-			<build type="header-file" value="Platform/UC3/InterruptManagement.h"/>

-			<build type="c-source" value="Platform/UC3/InterruptManagement.c"/>

-			<build type="asm-source" value="Platform/UC3/Exception.S"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<module type="driver" id="lufa.platform.uc3" caption="LUFA UC3 Platform Drivers">
+			<device-support-alias value="lufa_uc3"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_PlatformDrivers_UC3"/>
+
+			<build type="header-file" value="Platform/UC3/ClockManagement.h"/>
+			<build type="header-file" value="Platform/UC3/InterruptManagement.h"/>
+			<build type="c-source" value="Platform/UC3/InterruptManagement.c"/>
+			<build type="asm-source" value="Platform/UC3/Exception.S"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml
index 1674a77b02..e613fe5206 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_platform_xmega.xml
@@ -1,23 +1,23 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf xmlversion="1.0">

-		<module type="driver" id="lufa.platform.xmega" caption="LUFA XMEGA Platform Drivers">

-			<device-support-alias value="lufa_xmega"/>

-

-			<info type="gui-flag" value="hidden"/>

-

-			<build type="doxygen-entry-point" value="Group_PlatformDrivers_XMEGA"/>

-

-			<build type="header-file" value="Platform/XMEGA/ClockManagement.h"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf xmlversion="1.0">
+		<module type="driver" id="lufa.platform.xmega" caption="LUFA XMEGA Platform Drivers">
+			<device-support-alias value="lufa_xmega"/>
+
+			<info type="gui-flag" value="hidden"/>
+
+			<build type="doxygen-entry-point" value="Group_PlatformDrivers_XMEGA"/>
+
+			<build type="header-file" value="Platform/XMEGA/ClockManagement.h"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml
index 031c8a2be6..a76b6d0d3b 100644
--- a/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/LUFA/StudioIntegration/lufa_toolchain.xml
@@ -1,43 +1,43 @@
-<!--

-             LUFA Library

-     Copyright (C) Dean Camera, 2013.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

--->

-

-<!-- Atmel Studio framework integration file -->

-

-<lufa>

-	<asf>

-		<select-by-device id="common.utils.toolchain_config" caption="Toolchain configuration defaults">

-			<module type="build-specific" id="common.utils.toolchain_config#avr" caption="Toolchain configuration defaults for 8-bit AVR">

-				<info type="gui-flag" value="hidden"/>

-				<device-support value="avr"/>

-

-				<toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.warnings.AllWarnings" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -fno-jump-tables" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avrgcc"/>

-				<toolchain-config name="avrgcc.linker.optimization.RelaxBranches" value="True" toolchain="avrgcc"/>

-			</module>

-		</select-by-device>

-

-		<module type="build-specific" id="common.utils.toolchain_config#uc3" caption="Toolchain configuration defaults for 32-bit AVR">

-			<info type="gui-flag" value="hidden"/>

-			<device-support value="uc3"/>

-

-			<toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.compiler.warnings.AllWarnings" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -mno-cond-exec-before-reload" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avr32gcc"/>

-			<toolchain-config name="avr32gcc.linker.optimization.RelaxBranches" value="True" toolchain="avr32gcc"/>

-		</module>

-	</asf>

-</lufa>

+<!--
+             LUFA Library
+     Copyright (C) Dean Camera, 2013.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+-->
+
+<!-- Atmel Studio framework integration file -->
+
+<lufa>
+	<asf>
+		<select-by-device id="common.utils.toolchain_config" caption="Toolchain configuration defaults">
+			<module type="build-specific" id="common.utils.toolchain_config#avr" caption="Toolchain configuration defaults for 8-bit AVR">
+				<info type="gui-flag" value="hidden"/>
+				<device-support value="avr"/>
+
+				<toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.warnings.AllWarnings" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -fno-jump-tables" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avrgcc"/>
+				<toolchain-config name="avrgcc.linker.optimization.RelaxBranches" value="True" toolchain="avrgcc"/>
+			</module>
+		</select-by-device>
+
+		<module type="build-specific" id="common.utils.toolchain_config#uc3" caption="Toolchain configuration defaults for 32-bit AVR">
+			<info type="gui-flag" value="hidden"/>
+			<device-support value="uc3"/>
+
+			<toolchain-config name="avrgcc.compiler.general.ChangeDefaultBitFieldUnsigned" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avrgcc.compiler.general.ChangeDefaultCharTypeUnsigned" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.compiler.optimization.OtherFlags" value="-fdata-sections" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.compiler.optimization.PrepareFunctionsForGarbageCollection" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.compiler.warnings.AllWarnings" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.compiler.miscellaneous.OtherFlags" value="-mrelax -std=gnu99 -fno-strict-aliasing -mno-cond-exec-before-reload" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.linker.optimization.GarbageCollectUnusedSections" value="True" toolchain="avr32gcc"/>
+			<toolchain-config name="avr32gcc.linker.optimization.RelaxBranches" value="True" toolchain="avr32gcc"/>
+		</module>
+	</asf>
+</lufa>
diff --git a/tmk_core/protocol/lufa/descriptor.c b/tmk_core/protocol/lufa/descriptor.c
index 539a58d66b..6f2407f580 100644
--- a/tmk_core/protocol/lufa/descriptor.c
+++ b/tmk_core/protocol/lufa/descriptor.c
@@ -231,9 +231,15 @@ const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
     .Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
 
     .USBSpecification       = VERSION_BCD(1,1,0),
+#if VIRTSER_ENABLE
+    .Class                  = USB_CSCP_IADDeviceClass,
+    .SubClass               = USB_CSCP_IADDeviceSubclass,
+    .Protocol               = USB_CSCP_IADDeviceProtocol,
+#else
     .Class                  = USB_CSCP_NoDeviceClass,
     .SubClass               = USB_CSCP_NoDeviceSubclass,
     .Protocol               = USB_CSCP_NoDeviceProtocol,
+#endif
 
     .Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
 
@@ -643,8 +649,112 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 
             .TotalEmbeddedJacks       = 0x01,
             .AssociatedJackID         = {0x03}
-        }
+        },
 #endif
+
+#ifdef VIRTSER_ENABLE
+    .CDC_Interface_Association =
+            {
+                    .Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
+
+                    .FirstInterfaceIndex    = CCI_INTERFACE,
+                    .TotalInterfaces        = 2,
+
+                    .Class                  = CDC_CSCP_CDCClass,
+                    .SubClass               = CDC_CSCP_ACMSubclass,
+                    .Protocol               = CDC_CSCP_ATCommandProtocol,
+
+                    .IADStrIndex            = NO_DESCRIPTOR,
+            },
+
+    .CDC_CCI_Interface =
+            {
+                    .Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+                    .InterfaceNumber        = CCI_INTERFACE,
+                    .AlternateSetting       = 0,
+
+                    .TotalEndpoints         = 1,
+
+                    .Class                  = CDC_CSCP_CDCClass,
+                    .SubClass               = CDC_CSCP_ACMSubclass,
+                    .Protocol               = CDC_CSCP_ATCommandProtocol,
+
+                    .InterfaceStrIndex      = NO_DESCRIPTOR
+            },
+
+    .CDC_Functional_Header =
+            {
+                    .Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+                    .Subtype                = 0x00,
+
+                    .CDCSpecification       = VERSION_BCD(1,1,0),
+            },
+
+    .CDC_Functional_ACM =
+            {
+                    .Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+                    .Subtype                = 0x02,
+
+                    .Capabilities           = 0x02,
+            },
+
+    .CDC_Functional_Union =
+            {
+                    .Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+                    .Subtype                = 0x06,
+
+                    .MasterInterfaceNumber  = CCI_INTERFACE,
+                    .SlaveInterfaceNumber   = CDI_INTERFACE,
+            },
+
+    .CDC_NotificationEndpoint =
+            {
+                    .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+                    .EndpointAddress        = CDC_NOTIFICATION_EPADDR,
+                    .Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+                    .EndpointSize           = CDC_NOTIFICATION_EPSIZE,
+                    .PollingIntervalMS      = 0xFF
+            },
+
+    .CDC_DCI_Interface =
+            {
+                    .Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+                    .InterfaceNumber        = CDI_INTERFACE,
+                    .AlternateSetting       = 0,
+
+                    .TotalEndpoints         = 2,
+
+                    .Class                  = CDC_CSCP_CDCDataClass,
+                    .SubClass               = CDC_CSCP_NoDataSubclass,
+                    .Protocol               = CDC_CSCP_NoDataProtocol,
+
+                    .InterfaceStrIndex      = NO_DESCRIPTOR
+            },
+
+    .CDC_DataOutEndpoint =
+            {
+                    .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+                    .EndpointAddress        = CDC_OUT_EPADDR,
+                    .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+                    .EndpointSize           = CDC_EPSIZE,
+                    .PollingIntervalMS      = 0x05
+            },
+
+    .CDC_DataInEndpoint =
+            {
+                    .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+                    .EndpointAddress        = CDC_IN_EPADDR,
+                    .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+                    .EndpointSize           = CDC_EPSIZE,
+                    .PollingIntervalMS      = 0x05
+            },
+#endif
+
 };
 
 
diff --git a/tmk_core/protocol/lufa/descriptor.h b/tmk_core/protocol/lufa/descriptor.h
index 4fd81a0e87..316650a7b1 100644
--- a/tmk_core/protocol/lufa/descriptor.h
+++ b/tmk_core/protocol/lufa/descriptor.h
@@ -104,6 +104,21 @@ typedef struct
       USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_Out_Jack_Endpoint_SPC;
 #endif
 
+#ifdef VIRTSER_ENABLE
+        USB_Descriptor_Interface_Association_t   CDC_Interface_Association;
+
+	// CDC Control Interface
+	USB_Descriptor_Interface_t               CDC_CCI_Interface;
+	USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
+	USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
+	USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
+	USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
+
+	// CDC Data Interface
+	USB_Descriptor_Interface_t               CDC_DCI_Interface;
+	USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
+	USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
+#endif
 } USB_Descriptor_Configuration_t;
 
 
@@ -141,8 +156,15 @@ typedef struct
 #   define AS_INTERFACE           NKRO_INTERFACE
 #endif
 
+#ifdef VIRTSER_ENABLE
+#   define CCI_INTERFACE         (AS_INTERFACE + 1)
+#   define CDI_INTERFACE         (AS_INTERFACE + 2)
+#else
+#   define CDI_INTERFACE         AS_INTERFACE
+#endif
+
 /* nubmer of interfaces */
-#define TOTAL_INTERFACES            AS_INTERFACE + 1
+#define TOTAL_INTERFACES            (CDI_INTERFACE + 1)
 
 
 // Endopoint number and size
@@ -180,11 +202,24 @@ typedef struct
 #   define MIDI_STREAM_OUT_EPNUM    (NKRO_IN_EPNUM + 2)
 #   define MIDI_STREAM_IN_EPADDR    (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM)
 #   define MIDI_STREAM_OUT_EPADDR   (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM)
+#else
+#   define MIDI_STREAM_OUT_EPNUM     NKRO_IN_EPNUM
+#endif
+
+#ifdef VIRTSER_ENABLE
+#   define CDC_NOTIFICATION_EPNUM   (MIDI_STREAM_OUT_EPNUM + 1)
+#   define CDC_IN_EPNUM		    (MIDI_STREAM_OUT_EPNUM + 2)
+#   define CDC_OUT_EPNUM		    (MIDI_STREAM_OUT_EPNUM + 3)
+#   define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM)
+#   define CDC_IN_EPADDR                  (ENDPOINT_DIR_IN | CDC_IN_EPNUM)
+#   define CDC_OUT_EPADDR                  (ENDPOINT_DIR_OUT | CDC_OUT_EPNUM)
+#else
+#   define CDC_OUT_EPNUM	MIDI_STREAM_OUT_EPNUM
 #endif
 
 
-#if defined(__AVR_ATmega32U2__) && MIDI_STREAM_OUT_EPADDR > 4
-# error "Endpoints are not available enough to support all functions. Remove some in Makefile.(MOUSEKEY, EXTRAKEY, CONSOLE, NKRO, MIDI)"
+#if defined(__AVR_ATmega32U2__) && CDC_OUT_EPNUM > 4
+# error "Endpoints are not available enough to support all functions. Remove some in Makefile.(MOUSEKEY, EXTRAKEY, CONSOLE, NKRO, MIDI, SERIAL)"
 #endif
 
 #define KEYBOARD_EPSIZE             8
@@ -193,6 +228,8 @@ typedef struct
 #define CONSOLE_EPSIZE              32
 #define NKRO_EPSIZE                 16
 #define MIDI_STREAM_EPSIZE          64
+#define CDC_NOTIFICATION_EPSIZE     8
+#define CDC_EPSIZE                  16
 
 
 uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c
index 9ca55dbc9d..9b201374a2 100644
--- a/tmk_core/protocol/lufa/lufa.c
+++ b/tmk_core/protocol/lufa/lufa.c
@@ -60,6 +60,10 @@
     #include "bluetooth.h"
 #endif
 
+#ifdef VIRTSER_ENABLE
+    #include "virtser.h"
+#endif
+
 uint8_t keyboard_idle = 0;
 /* 0: Boot Protocol, 1: Report Protocol(default) */
 uint8_t keyboard_protocol = 1;
@@ -127,6 +131,34 @@ USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface =
 #define SYS_COMMON_3 0x30
 #endif
 
+#ifdef VIRTSER_ENABLE
+USB_ClassInfo_CDC_Device_t cdc_device =
+{
+  .Config =
+  {
+    .ControlInterfaceNumber = CCI_INTERFACE,
+    .DataINEndpoint         =
+    {
+      .Address		= CDC_IN_EPADDR,
+      .Size		= CDC_EPSIZE,
+      .Banks		= 1,
+    },
+    .DataOUTEndpoint	    =
+    {
+      .Address		= CDC_OUT_EPADDR,
+      .Size		= CDC_EPSIZE,
+      .Banks		= 1,
+    },
+    .NotificationEndpoint   =
+    {
+      .Address		= CDC_NOTIFICATION_EPADDR,
+      .Size		= CDC_NOTIFICATION_EPSIZE,
+      .Banks		= 1,
+    },
+  },
+};
+#endif
+
 
 /*******************************************************************************
  * Console
@@ -311,6 +343,12 @@ void EVENT_USB_Device_ConfigurationChanged(void)
     ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
     ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE);
 #endif
+
+#ifdef VIRTSER_ENABLE
+    ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE);
+    ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_OUT_EPADDR, EP_TYPE_BULK, CDC_EPSIZE, ENDPOINT_BANK_SINGLE);
+    ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_IN_EPADDR, EP_TYPE_BULK, CDC_EPSIZE, ENDPOINT_BANK_SINGLE);
+#endif
 }
 
 /*
@@ -432,10 +470,15 @@ void EVENT_USB_Device_ControlRequest(void)
 
             break;
     }
+
+#ifdef VIRTSER_ENABLE
+    CDC_Device_ProcessControlRequest(&cdc_device);
+#endif
 }
 
 /*******************************************************************************
  * Host driver
+p
  ******************************************************************************/
 static uint8_t keyboard_leds(void)
 {
@@ -827,6 +870,61 @@ void MIDI_Task(void)
 
 #endif
 
+/*******************************************************************************
+ * VIRTUAL SERIAL
+ ******************************************************************************/
+
+#ifdef VIRTSER_ENABLE
+void virtser_init(void)
+{
+  cdc_device.State.ControlLineStates.DeviceToHost = CDC_CONTROL_LINE_IN_DSR ;
+  CDC_Device_SendControlLineStateChange(&cdc_device);
+}
+
+void virtser_recv(uint8_t c) __attribute__ ((weak));
+void virtser_recv(uint8_t c)
+{
+  // Ignore by default
+}
+
+void virtser_task(void)
+{
+  uint16_t count = CDC_Device_BytesReceived(&cdc_device);
+  uint8_t ch;
+  if (count)
+  {
+    ch = CDC_Device_ReceiveByte(&cdc_device);
+    virtser_recv(ch);
+  }
+}
+void virtser_send(const uint8_t byte)
+{
+  uint8_t timeout = 255;
+  uint8_t ep = Endpoint_GetCurrentEndpoint();
+
+  if (cdc_device.State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR)
+  {
+    /* IN packet */
+    Endpoint_SelectEndpoint(cdc_device.Config.DataINEndpoint.Address);
+
+    if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
+        Endpoint_SelectEndpoint(ep);
+        return;
+    }
+
+    while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+
+    Endpoint_Write_8(byte);
+    CDC_Device_Flush(&cdc_device);
+
+    if (Endpoint_IsINReady()) {
+      Endpoint_ClearIN();
+    }
+
+    Endpoint_SelectEndpoint(ep);
+  }
+}
+#endif
 
 /*******************************************************************************
  * main
@@ -918,6 +1016,10 @@ int main(void)
     sleep_led_init();
 #endif
 
+#ifdef VIRTSER_ENABLE
+    virtser_init();
+#endif
+
     print("Keyboard start.\n");
     while (1) {
         #ifndef BLUETOOTH_ENABLE
@@ -936,6 +1038,11 @@ int main(void)
 #endif
         keyboard_task();
 
+#ifdef VIRTSER_ENABLE
+        virtser_task();
+        CDC_Device_USBTask(&cdc_device);
+#endif
+
 #if !defined(INTERRUPT_CONTROL_ENDPOINT)
         USB_USBTask();
 #endif