Moved files to common, protocol and doc directory

14 files changed, 1891 insertions, 0 deletions

diff --git a/protocol/pjrc/bootloader_teensy.c b/protocol/pjrc/bootloader_teensy.c
new file mode 100644
index 0000000000..9d34852f16
--- /dev/null
+++ b/protocol/pjrc/bootloader_teensy.c
@@ -0,0 +1,40 @@
+/* See  http://www.pjrc.com/teensy/jump_to_bootloader.html */
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "bootloader.h"
+
+void bootloader_jump(void) {
+    cli();
+    // disable watchdog, if enabled
+    // disable all peripherals
+    UDCON = 1;
+    USBCON = (1<<FRZCLK);  // disable USB
+    UCSR1B = 0;
+    _delay_ms(5);
+#if defined(__AVR_AT90USB162__)                // Teensy 1.0
+    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
+    TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
+    DDRB = 0; DDRC = 0; DDRD = 0;
+    PORTB = 0; PORTC = 0; PORTD = 0;
+    asm volatile("jmp 0x3E00");
+#elif defined(__AVR_ATmega32U4__)              // Teensy 2.0
+    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+    TIMSK0 = 0; TIMSK1 = 0; TIMSK3 = 0; TIMSK4 = 0; UCSR1B = 0; TWCR = 0;
+    DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0; TWCR = 0;
+    PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+    asm volatile("jmp 0x7E00");
+#elif defined(__AVR_AT90USB646__)              // Teensy++ 1.0
+    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+    TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
+    DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
+    PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+    asm volatile("jmp 0xFC00");
+#elif defined(__AVR_AT90USB1286__)             // Teensy++ 2.0
+    EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0; ADCSRA = 0;
+    TIMSK0 = 0; TIMSK1 = 0; TIMSK2 = 0; TIMSK3 = 0; UCSR1B = 0; TWCR = 0;
+    DDRA = 0; DDRB = 0; DDRC = 0; DDRD = 0; DDRE = 0; DDRF = 0;
+    PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
+    asm volatile("jmp 0x1FC00");
+#endif
+}
diff --git a/protocol/pjrc/main.c b/protocol/pjrc/main.c
new file mode 100644
index 0000000000..15f14920b4
--- /dev/null
+++ b/protocol/pjrc/main.c
@@ -0,0 +1,97 @@
+/* Keyboard example with debug channel, for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2008 PJRC.COM, LLC
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "keyboard.h"
+#include "usb.h"
+#include "matrix.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "bootloader.h"
+#ifdef PS2_MOUSE_ENABLE
+#   include "ps2_mouse.h"
+#endif
+#include "host.h"
+#include "pjrc.h"
+
+
+#define CPU_PRESCALE(n)    (CLKPR = 0x80, CLKPR = (n))
+
+
+bool debug_enable = false;
+bool debug_matrix = false;
+bool debug_keyboard = false;
+bool debug_mouse = false;
+
+
+int main(void)
+{
+    DEBUG_LED_CONFIG;
+    DEBUG_LED_OFF;
+
+    // set for 16 MHz clock
+    CPU_PRESCALE(0);
+
+    // Initialize the USB, and then wait for the host to set configuration.
+    // If the Teensy is powered without a PC connected to the USB port,
+    // this will wait forever.
+    usb_init();
+    while (!usb_configured()) /* wait */ ;
+
+    keyboard_init();
+    matrix_scan();
+    if (matrix_key_count() >= 3) {
+#ifdef DEBUG_LED
+        for (int i = 0; i < 6; i++) {
+            DEBUG_LED_CONFIG;
+            DEBUG_LED_ON;
+            _delay_ms(500);
+            DEBUG_LED_OFF;
+            _delay_ms(500);
+        }
+#else
+        _delay_ms(5000);
+#endif
+        print_enable = true;
+        debug_enable = true;
+        debug_matrix = true;
+        debug_keyboard = true;
+        debug_mouse = true;
+        print("debug enabled.\n");
+    }
+    if (matrix_key_count() >= 4) {
+        print("jump to bootloader...\n");
+        _delay_ms(1000);
+        bootloader_jump(); // not return
+    }
+
+
+    host_set_driver(pjrc_driver());
+    while (1) {
+       keyboard_proc(); 
+    }
+}
diff --git a/protocol/pjrc/pjrc.c b/protocol/pjrc/pjrc.c
new file mode 100644
index 0000000000..0562a12ffa
--- /dev/null
+++ b/protocol/pjrc/pjrc.c
@@ -0,0 +1,76 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include "usb_keyboard.h"
+#include "usb_mouse.h"
+#include "usb_extra.h"
+#include "host_driver.h"
+#include "pjrc.h"
+
+
+/*------------------------------------------------------------------*
+ * Host driver
+ *------------------------------------------------------------------*/
+static uint8_t keyboard_leds(void);
+static void send_keyboard(report_keyboard_t *report);
+static void send_mouse(report_mouse_t *report);
+static void send_system(uint16_t data);
+static void send_consumer(uint16_t data);
+
+static host_driver_t driver = {
+        keyboard_leds,
+        send_keyboard,
+        send_mouse,
+        send_system,
+        send_consumer
+};
+
+host_driver_t *pjrc_driver(void)
+{
+    return &driver;
+}
+
+static uint8_t keyboard_leds(void) {
+    return usb_keyboard_leds;
+}
+
+static void send_keyboard(report_keyboard_t *report)
+{
+    usb_keyboard_send_report(report);
+}
+
+static void send_mouse(report_mouse_t *report)
+{
+#ifdef MOUSE_ENABLE
+    usb_mouse_send(report->x, report->y, report->v, report->h, report->buttons);
+#endif
+}
+
+static void send_system(uint16_t data)
+{
+#ifdef EXTRAKEY_ENABLE
+    usb_extra_system_send(data);
+#endif
+}
+
+static void send_consumer(uint16_t data)
+{
+#ifdef EXTRAKEY_ENABLE
+    usb_extra_consumer_send(data);
+#endif
+}
diff --git a/protocol/pjrc/pjrc.h b/protocol/pjrc/pjrc.h
new file mode 100644
index 0000000000..06e79626fc
--- /dev/null
+++ b/protocol/pjrc/pjrc.h
@@ -0,0 +1,26 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef PJRC_H
+#define PJRC_H
+
+#include "host_driver.h"
+
+
+host_driver_t *pjrc_driver(void);
+
+#endif
diff --git a/protocol/pjrc/usb.c b/protocol/pjrc/usb.c
new file mode 100644
index 0000000000..89087218f3
--- /dev/null
+++ b/protocol/pjrc/usb.c
@@ -0,0 +1,962 @@
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * 
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ * 
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include "usb.h"
+#include "usb_keyboard.h"
+#include "usb_mouse.h"
+#include "usb_debug.h"
+#include "usb_extra.h"
+#include "print.h"
+#include "util.h"
+
+
+/**************************************************************************
+ *
+ *  Configurable Options
+ *
+ **************************************************************************/
+
+// You can change these to give your code its own name.
+#ifndef MANUFACTURER
+#   define STR_MANUFACTURER	L"t.m.k."
+#else
+#   define STR_MANUFACTURER	LSTR(MANUFACTURER)
+#endif
+#ifndef PRODUCT
+#   define STR_PRODUCT		L"t.m.k. keyboard"
+#else
+#   define STR_PRODUCT		LSTR(PRODUCT)
+#endif
+
+
+// Mac OS-X and Linux automatically load the correct drivers.  On
+// Windows, even though the driver is supplied by Microsoft, an
+// INF file is needed to load the driver.  These numbers need to
+// match the INF file.
+#ifndef VENDOR_ID
+#   define VENDOR_ID		0xFEED
+#endif
+
+#ifndef PRODUCT_ID
+#   define PRODUCT_ID		0xBABE
+#endif
+
+#ifndef DEVICE_VER
+#   define DEVICE_VER		0x0100
+#endif
+
+
+// USB devices are supposed to implment a halt feature, which is
+// rarely (if ever) used.  If you comment this line out, the halt
+// code will be removed, saving 102 bytes of space (gcc 4.3.0).
+// This is not strictly USB compliant, but works with all major
+// operating systems.
+#define SUPPORT_ENDPOINT_HALT
+
+
+
+/**************************************************************************
+ *
+ *  Endpoint Buffer Configuration
+ *
+ **************************************************************************/
+
+#define ENDPOINT0_SIZE		32
+
+bool remote_wakeup = false;
+bool suspend = false;
+
+// 0:control endpoint is enabled automatically by controller.
+static const uint8_t PROGMEM endpoint_config_table[] = {
+	// enable, UECFG0X(type, direction), UECFG1X(size, bank, allocation)
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(KBD_SIZE)      | KBD_BUFFER,      // 1
+#ifdef MOUSE_ENABLE
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(MOUSE_SIZE)    | MOUSE_BUFFER,    // 2
+#else
+        0,                                                                  // 2
+#endif
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER, // 3
+#ifdef EXTRAKEY_ENABLE
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(EXTRA_SIZE)    | EXTRA_BUFFER,    // 4
+#else
+        0,                                                                  // 4
+#endif
+#ifdef NKRO_ENABLE
+	1, EP_TYPE_INTERRUPT_IN,  EP_SIZE(KBD2_SIZE)     | KBD2_BUFFER,     // 5
+#else
+        0,                                                                  // 5
+#endif
+        0,                                                                  // 6
+};
+
+
+/**************************************************************************
+ *
+ *  Descriptor Data
+ *
+ **************************************************************************/
+
+// Descriptors are the data that your computer reads when it auto-detects
+// this USB device (called "enumeration" in USB lingo).  The most commonly
+// changed items are editable at the top of this file.  Changing things
+// in here should only be done by those who've read chapter 9 of the USB
+// spec and relevant portions of any USB class specifications!
+
+
+static uint8_t PROGMEM device_descriptor[] = {
+	18,					// bLength
+	1,					// bDescriptorType
+	0x00, 0x02,				// bcdUSB
+	0,					// bDeviceClass
+	0,					// bDeviceSubClass
+	0,					// bDeviceProtocol
+	ENDPOINT0_SIZE,				// bMaxPacketSize0
+	LSB(VENDOR_ID), MSB(VENDOR_ID),		// idVendor
+	LSB(PRODUCT_ID), MSB(PRODUCT_ID),	// idProduct
+	LSB(DEVICE_VER), MSB(DEVICE_VER),	// bcdDevice
+	1,					// iManufacturer
+	2,					// iProduct
+	0,					// iSerialNumber
+	1					// bNumConfigurations
+};
+
+// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
+static uint8_t PROGMEM keyboard_hid_report_desc[] = {
+        0x05, 0x01,          // Usage Page (Generic Desktop),
+        0x09, 0x06,          // Usage (Keyboard),
+        0xA1, 0x01,          // Collection (Application),
+        0x75, 0x01,          //   Report Size (1),
+        0x95, 0x08,          //   Report Count (8),
+        0x05, 0x07,          //   Usage Page (Key Codes),
+        0x19, 0xE0,          //   Usage Minimum (224),
+        0x29, 0xE7,          //   Usage Maximum (231),
+        0x15, 0x00,          //   Logical Minimum (0),
+        0x25, 0x01,          //   Logical Maximum (1),
+        0x81, 0x02,          //   Input (Data, Variable, Absolute), ;Modifier byte
+        0x95, 0x01,          //   Report Count (1),
+        0x75, 0x08,          //   Report Size (8),
+        0x81, 0x03,          //   Input (Constant),                 ;Reserved byte
+        0x95, 0x05,          //   Report Count (5),
+        0x75, 0x01,          //   Report Size (1),
+        0x05, 0x08,          //   Usage Page (LEDs),
+        0x19, 0x01,          //   Usage Minimum (1),
+        0x29, 0x05,          //   Usage Maximum (5),
+        0x91, 0x02,          //   Output (Data, Variable, Absolute), ;LED report
+        0x95, 0x01,          //   Report Count (1),
+        0x75, 0x03,          //   Report Size (3),
+        0x91, 0x03,          //   Output (Constant),                 ;LED report padding
+        0x95, KBD_REPORT_KEYS,    //   Report Count (),
+        0x75, 0x08,          //   Report Size (8),
+        0x15, 0x00,          //   Logical Minimum (0),
+        0x25, 0xFF,          //   Logical Maximum(255),
+        0x05, 0x07,          //   Usage Page (Key Codes),
+        0x19, 0x00,          //   Usage Minimum (0),
+        0x29, 0xFF,          //   Usage Maximum (255),
+        0x81, 0x00,          //   Input (Data, Array),
+        0xc0                 // End Collection
+};
+#ifdef NKRO_ENABLE
+static uint8_t PROGMEM keyboard2_hid_report_desc[] = {
+        0x05, 0x01,                     // Usage Page (Generic Desktop),
+        0x09, 0x06,                     // Usage (Keyboard),
+        0xA1, 0x01,                     // Collection (Application),
+        // bitmap of modifiers
+        0x75, 0x01,                     //   Report Size (1),
+        0x95, 0x08,                     //   Report Count (8),
+        0x05, 0x07,                     //   Usage Page (Key Codes),
+        0x19, 0xE0,                     //   Usage Minimum (224),
+        0x29, 0xE7,                     //   Usage Maximum (231),
+        0x15, 0x00,                     //   Logical Minimum (0),
+        0x25, 0x01,                     //   Logical Maximum (1),
+        0x81, 0x02,                     //   Input (Data, Variable, Absolute), ;Modifier byte
+        // LED output report
+        0x95, 0x05,                     //   Report Count (5),
+        0x75, 0x01,                     //   Report Size (1),
+        0x05, 0x08,                     //   Usage Page (LEDs),
+        0x19, 0x01,                     //   Usage Minimum (1),
+        0x29, 0x05,                     //   Usage Maximum (5),
+        0x91, 0x02,                     //   Output (Data, Variable, Absolute),
+        0x95, 0x01,                     //   Report Count (1),
+        0x75, 0x03,                     //   Report Size (3),
+        0x91, 0x03,                     //   Output (Constant),
+        // bitmap of keys
+        0x95, KBD2_REPORT_KEYS*8,       //   Report Count (),
+        0x75, 0x01,                     //   Report Size (1),
+        0x15, 0x00,                     //   Logical Minimum (0),
+        0x25, 0x01,                     //   Logical Maximum(1),
+        0x05, 0x07,                     //   Usage Page (Key Codes),
+        0x19, 0x00,                     //   Usage Minimum (0),
+        0x29, KBD2_REPORT_KEYS*8-1,     //   Usage Maximum (),
+        0x81, 0x02,                     //   Input (Data, Variable, Absolute),
+        0xc0                            // End Collection
+};
+#endif
+
+#ifdef MOUSE_ENABLE
+// Mouse Protocol 1, HID 1.11 spec, Appendix B, page 59-60, with wheel extension
+// http://www.microchip.com/forums/tm.aspx?high=&m=391435&mpage=1#391521
+// http://www.keil.com/forum/15671/
+// http://www.microsoft.com/whdc/device/input/wheel.mspx
+static uint8_t PROGMEM mouse_hid_report_desc[] = {
+    /* mouse */
+    0x05, 0x01,                    // USAGE_PAGE (Generic Desktop)
+    0x09, 0x02,                    // USAGE (Mouse)
+    0xa1, 0x01,                    // COLLECTION (Application)
+    //0x85, REPORT_ID_MOUSE,         //   REPORT_ID (1)
+    0x09, 0x01,                    //   USAGE (Pointer)
+    0xa1, 0x00,                    //   COLLECTION (Physical)
+                                   // ----------------------------  Buttons
+    0x05, 0x09,                    //     USAGE_PAGE (Button)
+    0x19, 0x01,                    //     USAGE_MINIMUM (Button 1)
+    0x29, 0x05,                    //     USAGE_MAXIMUM (Button 5)
+    0x15, 0x00,                    //     LOGICAL_MINIMUM (0)
+    0x25, 0x01,                    //     LOGICAL_MAXIMUM (1)
+    0x75, 0x01,                    //     REPORT_SIZE (1)
+    0x95, 0x05,                    //     REPORT_COUNT (5)
+    0x81, 0x02,                    //     INPUT (Data,Var,Abs)
+    0x75, 0x03,                    //     REPORT_SIZE (3)
+    0x95, 0x01,                    //     REPORT_COUNT (1)
+    0x81, 0x03,                    //     INPUT (Cnst,Var,Abs)
+                                   // ----------------------------  X,Y position
+    0x05, 0x01,                    //     USAGE_PAGE (Generic Desktop)
+    0x09, 0x30,                    //     USAGE (X)
+    0x09, 0x31,                    //     USAGE (Y)
+    0x15, 0x81,                    //     LOGICAL_MINIMUM (-127)
+    0x25, 0x7f,                    //     LOGICAL_MAXIMUM (127)
+    0x75, 0x08,                    //     REPORT_SIZE (8)
+    0x95, 0x02,                    //     REPORT_COUNT (2)
+    0x81, 0x06,                    //     INPUT (Data,Var,Rel)
+                                   // ----------------------------  Vertical wheel
+    0x09, 0x38,                    //     USAGE (Wheel)
+    0x15, 0x81,                    //     LOGICAL_MINIMUM (-127)
+    0x25, 0x7f,                    //     LOGICAL_MAXIMUM (127)
+    0x35, 0x00,                    //     PHYSICAL_MINIMUM (0)        - reset physical
+    0x45, 0x00,                    //     PHYSICAL_MAXIMUM (0)
+    0x75, 0x08,                    //     REPORT_SIZE (8)
+    0x95, 0x01,                    //     REPORT_COUNT (1)
+    0x81, 0x06,                    //     INPUT (Data,Var,Rel)
+                                   // ----------------------------  Horizontal wheel
+    0x05, 0x0c,                    //     USAGE_PAGE (Consumer Devices)
+    0x0a, 0x38, 0x02,              //     USAGE (AC Pan)
+    0x15, 0x81,                    //     LOGICAL_MINIMUM (-127)
+    0x25, 0x7f,                    //     LOGICAL_MAXIMUM (127)
+    0x75, 0x08,                    //     REPORT_SIZE (8)
+    0x95, 0x01,                    //     REPORT_COUNT (1)
+    0x81, 0x06,                    //     INPUT (Data,Var,Rel)
+    0xc0,                          //   END_COLLECTION
+    0xc0,                          // END_COLLECTION
+};
+#endif
+
+static uint8_t PROGMEM debug_hid_report_desc[] = {
+	0x06, 0x31, 0xFF,			// Usage Page 0xFF31 (vendor defined)
+	0x09, 0x74,				// Usage 0x74
+	0xA1, 0x53,				// Collection 0x53
+	0x75, 0x08,				// report size = 8 bits
+	0x15, 0x00,				// logical minimum = 0
+	0x26, 0xFF, 0x00,			// logical maximum = 255
+	0x95, DEBUG_TX_SIZE,			// report count
+	0x09, 0x75,				// usage
+	0x81, 0x02,				// Input (array)
+	0xC0					// end collection
+};
+
+#ifdef EXTRAKEY_ENABLE
+// audio controls & system controls
+// http://www.microsoft.com/whdc/archive/w2kbd.mspx
+static uint8_t PROGMEM extra_hid_report_desc[] = {
+    /* system control */
+    0x05, 0x01,                    // USAGE_PAGE (Generic Desktop)
+    0x09, 0x80,                    // USAGE (System Control)
+    0xa1, 0x01,                    // COLLECTION (Application)
+    0x85, REPORT_ID_SYSTEM,        //   REPORT_ID (2)
+    0x15, 0x01,                    //   LOGICAL_MINIMUM (0x1)
+    0x25, 0xb7,                    //   LOGICAL_MAXIMUM (0xb7)
+    0x19, 0x01,                    //   USAGE_MINIMUM (0x1)
+    0x29, 0xb7,                    //   USAGE_MAXIMUM (0xb7)
+    0x75, 0x10,                    //   REPORT_SIZE (16)
+    0x95, 0x01,                    //   REPORT_COUNT (1)
+    0x81, 0x00,                    //   INPUT (Data,Array,Abs)
+    0xc0,                          // END_COLLECTION
+    /* consumer */
+    0x05, 0x0c,                    // USAGE_PAGE (Consumer Devices)
+    0x09, 0x01,                    // USAGE (Consumer Control)
+    0xa1, 0x01,                    // COLLECTION (Application)
+    0x85, REPORT_ID_CONSUMER,      //   REPORT_ID (3)
+    0x15, 0x01,                    //   LOGICAL_MINIMUM (0x1)
+    0x26, 0x9c, 0x02,              //   LOGICAL_MAXIMUM (0x29c)
+    0x19, 0x01,                    //   USAGE_MINIMUM (0x1)
+    0x2a, 0x9c, 0x02,              //   USAGE_MAXIMUM (0x29c)
+    0x75, 0x10,                    //   REPORT_SIZE (16)
+    0x95, 0x01,                    //   REPORT_COUNT (1)
+    0x81, 0x00,                    //   INPUT (Data,Array,Abs)
+    0xc0,                          // END_COLLECTION
+};
+#endif
+
+#define KBD_HID_DESC_NUM                0
+#define KBD_HID_DESC_OFFSET             (9+(9+9+7)*KBD_HID_DESC_NUM+9)
+
+#ifdef MOUSE_ENABLE
+#   define MOUSE_HID_DESC_NUM           (KBD_HID_DESC_NUM + 1)
+#   define MOUSE_HID_DESC_OFFSET        (9+(9+9+7)*MOUSE_HID_DESC_NUM+9)
+#else
+#   define MOUSE_HID_DESC_NUM           (KBD_HID_DESC_NUM + 0)
+#endif
+
+#define DEBUG_HID_DESC_NUM              (MOUSE_HID_DESC_NUM + 1)
+#define DEBUG_HID_DESC_OFFSET           (9+(9+9+7)*DEBUG_HID_DESC_NUM+9)
+
+#ifdef EXTRAKEY_ENABLE
+#   define EXTRA_HID_DESC_NUM           (DEBUG_HID_DESC_NUM + 1)
+#   define EXTRA_HID_DESC_OFFSET        (9+(9+9+7)*EXTRA_HID_DESC_NUM+9)
+#else
+#   define EXTRA_HID_DESC_NUM           (DEBUG_HID_DESC_NUM + 0)
+#endif
+
+#ifdef NKRO_ENABLE
+#   define KBD2_HID_DESC_NUM            (EXTRA_HID_DESC_NUM + 1)
+#   define KBD2_HID_DESC_OFFSET         (9+(9+9+7)*EXTRA_HID_DESC_NUM+9)
+#else
+#   define KBD2_HID_DESC_NUM            (EXTRA_HID_DESC_NUM + 0)
+#endif
+
+#define NUM_INTERFACES                  (KBD2_HID_DESC_NUM + 1)
+#define CONFIG1_DESC_SIZE               (9+(9+9+7)*NUM_INTERFACES)
+static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
+	// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
+	9, 					// bLength;
+	2,					// bDescriptorType;
+	LSB(CONFIG1_DESC_SIZE),			// wTotalLength
+	MSB(CONFIG1_DESC_SIZE),
+	NUM_INTERFACES,				// bNumInterfaces
+	1,					// bConfigurationValue
+	0,					// iConfiguration
+	0xA0,					// bmAttributes
+	50,					// bMaxPower
+
+	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+	9,					// bLength
+	4,					// bDescriptorType
+	KBD_INTERFACE,				// bInterfaceNumber
+	0,					// bAlternateSetting
+	1,					// bNumEndpoints
+	0x03,					// bInterfaceClass (0x03 = HID)
+	0x01,					// bInterfaceSubClass (0x01 = Boot)
+	0x01,					// bInterfaceProtocol (0x01 = Keyboard)
+	0,					// iInterface
+	// HID descriptor, HID 1.11 spec, section 6.2.1
+	9,					// bLength
+	0x21,					// bDescriptorType
+	0x11, 0x01,				// bcdHID
+	0,					// bCountryCode
+	1,					// bNumDescriptors
+	0x22,					// bDescriptorType
+	sizeof(keyboard_hid_report_desc),     	// wDescriptorLength
+	0,
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	KBD_ENDPOINT | 0x80,			// bEndpointAddress
+	0x03,					// bmAttributes (0x03=intr)
+	KBD_SIZE, 0,				// wMaxPacketSize
+	10,					// bInterval
+
+#ifdef MOUSE_ENABLE
+	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+	9,					// bLength
+	4,					// bDescriptorType
+	MOUSE_INTERFACE,			// bInterfaceNumber
+	0,					// bAlternateSetting
+	1,					// bNumEndpoints
+	0x03,					// bInterfaceClass (0x03 = HID)
+        // ThinkPad T23 BIOS doesn't work with boot mouse.
+	0x00,					// bInterfaceSubClass (0x01 = Boot)
+	0x00,					// bInterfaceProtocol (0x02 = Mouse)
+/*
+	0x01,					// bInterfaceSubClass (0x01 = Boot)
+	0x02,					// bInterfaceProtocol (0x02 = Mouse)
+*/
+	0,					// iInterface
+	// HID descriptor, HID 1.11 spec, section 6.2.1
+	9,					// bLength
+	0x21,					// bDescriptorType
+	0x11, 0x01,				// bcdHID
+	0,					// bCountryCode
+	1,					// bNumDescriptors
+	0x22,					// bDescriptorType
+	sizeof(mouse_hid_report_desc),		// wDescriptorLength
+	0,
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	MOUSE_ENDPOINT | 0x80,			// bEndpointAddress
+	0x03,					// bmAttributes (0x03=intr)
+	MOUSE_SIZE, 0,				// wMaxPacketSize
+	1,					// bInterval
+#endif
+
+	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+	9,					// bLength
+	4,					// bDescriptorType
+	DEBUG_INTERFACE,			// bInterfaceNumber
+	0,					// bAlternateSetting
+	1,					// bNumEndpoints
+	0x03,					// bInterfaceClass (0x03 = HID)
+	0x00,					// bInterfaceSubClass
+	0x00,					// bInterfaceProtocol
+	0,					// iInterface
+	// HID descriptor, HID 1.11 spec, section 6.2.1
+	9,					// bLength
+	0x21,					// bDescriptorType
+	0x11, 0x01,				// bcdHID
+	0,					// bCountryCode
+	1,					// bNumDescriptors
+	0x22,					// bDescriptorType
+	sizeof(debug_hid_report_desc),		// wDescriptorLength
+	0,
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	DEBUG_TX_ENDPOINT | 0x80,		// bEndpointAddress
+	0x03,					// bmAttributes (0x03=intr)
+	DEBUG_TX_SIZE, 0,			// wMaxPacketSize
+	1,					// bInterval
+
+#ifdef EXTRAKEY_ENABLE
+	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+	9,					// bLength
+	4,					// bDescriptorType
+	EXTRA_INTERFACE,			// bInterfaceNumber
+	0,					// bAlternateSetting
+	1,					// bNumEndpoints
+	0x03,					// bInterfaceClass (0x03 = HID)
+	0x00,					// bInterfaceSubClass
+	0x00,					// bInterfaceProtocol
+	0,					// iInterface
+	// HID descriptor, HID 1.11 spec, section 6.2.1
+	9,					// bLength
+	0x21,					// bDescriptorType
+	0x11, 0x01,				// bcdHID
+	0,					// bCountryCode
+	1,					// bNumDescriptors
+	0x22,					// bDescriptorType
+	sizeof(extra_hid_report_desc),		// wDescriptorLength
+	0,
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	EXTRA_ENDPOINT | 0x80,			// bEndpointAddress
+	0x03,					// bmAttributes (0x03=intr)
+	EXTRA_SIZE, 0,				// wMaxPacketSize
+	10,					// bInterval
+#endif
+
+#ifdef NKRO_ENABLE
+	// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+	9,					// bLength
+	4,					// bDescriptorType
+	KBD2_INTERFACE,				// bInterfaceNumber
+	0,					// bAlternateSetting
+	1,					// bNumEndpoints
+	0x03,					// bInterfaceClass (0x03 = HID)
+	0x00,					// bInterfaceSubClass (0x01 = Boot)
+	0x00,					// bInterfaceProtocol (0x01 = Keyboard)
+	0,					// iInterface
+	// HID descriptor, HID 1.11 spec, section 6.2.1
+	9,					// bLength
+	0x21,					// bDescriptorType
+	0x11, 0x01,				// bcdHID
+	0,					// bCountryCode
+	1,					// bNumDescriptors
+	0x22,					// bDescriptorType
+	sizeof(keyboard2_hid_report_desc),     	// wDescriptorLength
+	0,
+	// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+	7,					// bLength
+	5,					// bDescriptorType
+	KBD2_ENDPOINT | 0x80,			// bEndpointAddress
+	0x03,					// bmAttributes (0x03=intr)
+	KBD2_SIZE, 0,				// wMaxPacketSize
+	1,					// bInterval
+#endif
+};
+
+// If you're desperate for a little extra code memory, these strings
+// can be completely removed if iManufacturer, iProduct, iSerialNumber
+// in the device desciptor are changed to zeros.
+struct usb_string_descriptor_struct {
+	uint8_t bLength;
+	uint8_t bDescriptorType;
+	int16_t wString[];
+};
+static struct usb_string_descriptor_struct PROGMEM string0 = {
+	4,
+	3,
+	{0x0409}
+};
+static struct usb_string_descriptor_struct PROGMEM string1 = {
+	sizeof(STR_MANUFACTURER),
+	3,
+	STR_MANUFACTURER
+};
+static struct usb_string_descriptor_struct PROGMEM string2 = {
+	sizeof(STR_PRODUCT),
+	3,
+	STR_PRODUCT
+};
+
+// This table defines which descriptor data is sent for each specific
+// request from the host (in wValue and wIndex).
+static struct descriptor_list_struct {
+	uint16_t	wValue;     // descriptor type
+	uint16_t	wIndex;
+	const uint8_t	*addr;
+	uint8_t		length;
+} PROGMEM descriptor_list[] = {
+        // DEVICE descriptor
+	{0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
+        // CONFIGURATION descriptor
+	{0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
+        // HID/REPORT descriptors
+	{0x2100, KBD_INTERFACE, config1_descriptor+KBD_HID_DESC_OFFSET, 9},
+	{0x2200, KBD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
+#ifdef MOUSE_ENABLE
+	{0x2100, MOUSE_INTERFACE, config1_descriptor+MOUSE_HID_DESC_OFFSET, 9},
+	{0x2200, MOUSE_INTERFACE, mouse_hid_report_desc, sizeof(mouse_hid_report_desc)},
+#endif
+	{0x2100, DEBUG_INTERFACE, config1_descriptor+DEBUG_HID_DESC_OFFSET, 9},
+	{0x2200, DEBUG_INTERFACE, debug_hid_report_desc, sizeof(debug_hid_report_desc)},
+#ifdef EXTRAKEY_ENABLE
+	{0x2100, EXTRA_INTERFACE, config1_descriptor+EXTRA_HID_DESC_OFFSET, 9},
+	{0x2200, EXTRA_INTERFACE, extra_hid_report_desc, sizeof(extra_hid_report_desc)},
+#endif
+#ifdef NKRO_ENABLE
+	{0x2100, KBD2_INTERFACE, config1_descriptor+KBD2_HID_DESC_OFFSET, 9},
+	{0x2200, KBD2_INTERFACE, keyboard2_hid_report_desc, sizeof(keyboard2_hid_report_desc)},
+#endif
+        // STRING descriptors
+	{0x0300, 0x0000, (const uint8_t *)&string0, 4},
+	{0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
+	{0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)}
+};
+#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct))
+
+
+/**************************************************************************
+ *
+ *  Variables - these are the only non-stack RAM usage
+ *
+ **************************************************************************/
+
+// zero when we are not configured, non-zero when enumerated
+static volatile uint8_t usb_configuration=0;
+
+
+/**************************************************************************
+ *
+ *  Public Functions - these are the API intended for the user
+ *
+ **************************************************************************/
+
+
+// initialize USB
+void usb_init(void)
+{
+	HW_CONFIG();
+	USB_FREEZE();				// enable USB
+	PLL_CONFIG();				// config PLL
+        while (!(PLLCSR & (1<<PLOCK))) ;	// wait for PLL lock
+        USB_CONFIG();				// start USB clock
+        UDCON = 0;				// enable attach resistor
+	usb_configuration = 0;
+        UDIEN = (1<<EORSTE)|(1<<SOFE)|(1<<SUSPE);
+	sei();
+}
+
+// return 0 if the USB is not configured, or the configuration
+// number selected by the HOST
+uint8_t usb_configured(void)
+{
+	return usb_configuration && !suspend;
+}
+
+void usb_remote_wakeup(void)
+{
+    UDCON |= (1<<RMWKUP);
+}
+
+
+
+/**************************************************************************
+ *
+ *  Private Functions - not intended for general user consumption....
+ *
+ **************************************************************************/
+
+
+
+// USB Device Interrupt - handle all device-level events
+// the transmit buffer flushing is triggered by the start of frame
+//
+ISR(USB_GEN_vect)
+{
+	uint8_t intbits, t;
+	static uint8_t div4=0;
+
+        intbits = UDINT;
+        UDINT = 0;
+        if (intbits & (1<<SUSPI)) {
+            suspend = true;
+        } else {
+            suspend = false;
+        }
+        if (intbits & (1<<EORSTI)) {
+		UENUM = 0;
+		UECONX = 1;
+		UECFG0X = EP_TYPE_CONTROL;
+		UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
+		UEIENX = (1<<RXSTPE);
+		usb_configuration = 0;
+        }
+	if ((intbits & (1<<SOFI)) && usb_configuration) {
+		t = debug_flush_timer;
+		if (t) {
+			debug_flush_timer = -- t;
+			if (!t) {
+				UENUM = DEBUG_TX_ENDPOINT;
+				while ((UEINTX & (1<<RWAL))) {
+					UEDATX = 0;
+				}
+				UEINTX = 0x3A;
+			}
+		}
+                /* TODO: should keep IDLE rate on each keyboard interface */
+#ifdef NKRO_ENABLE
+		if (!keyboard_nkro && usb_keyboard_idle_config && (++div4 & 3) == 0) {
+#else
+		if (usb_keyboard_idle_config && (++div4 & 3) == 0) {
+#endif
+			UENUM = KBD_ENDPOINT;
+			if (UEINTX & (1<<RWAL)) {
+				usb_keyboard_idle_count++;
+				if (usb_keyboard_idle_count == usb_keyboard_idle_config) {
+					usb_keyboard_idle_count = 0;
+                                        /* TODO: fix keyboard_report inconsistency */
+/* To avoid Mac SET_IDLE behaviour.
+					UEDATX = keyboard_report_prev->mods;
+					UEDATX = 0;
+                                        uint8_t keys = usb_keyboard_protocol ? KBD_REPORT_KEYS : 6;
+					for (uint8_t i=0; i<keys; i++) {
+						UEDATX = keyboard_report_prev->keys[i];
+					}
+					UEINTX = 0x3A;
+*/
+				}
+			}
+		}
+	}
+}
+
+
+
+// Misc functions to wait for ready and send/receive packets
+static inline void usb_wait_in_ready(void)
+{
+	while (!(UEINTX & (1<<TXINI))) ;
+}
+static inline void usb_send_in(void)
+{
+	UEINTX = ~(1<<TXINI);
+}
+static inline void usb_wait_receive_out(void)
+{
+	while (!(UEINTX & (1<<RXOUTI))) ;
+}
+static inline void usb_ack_out(void)
+{
+	UEINTX = ~(1<<RXOUTI);
+}
+
+
+
+// USB Endpoint Interrupt - endpoint 0 is handled here.  The
+// other endpoints are manipulated by the user-callable
+// functions, and the start-of-frame interrupt.
+//
+ISR(USB_COM_vect)
+{
+        uint8_t intbits;
+	const uint8_t *list;
+        const uint8_t *cfg;
+	uint8_t i, n, len, en;
+	uint8_t bmRequestType;
+	uint8_t bRequest;
+	uint16_t wValue;
+	uint16_t wIndex;
+	uint16_t wLength;
+	uint16_t desc_val;
+	const uint8_t *desc_addr;
+	uint8_t	desc_length;
+
+        UENUM = 0;
+	intbits = UEINTX;
+        if (intbits & (1<<RXSTPI)) {
+                bmRequestType = UEDATX;
+                bRequest = UEDATX;
+                wValue = UEDATX;
+                wValue |= (UEDATX << 8);
+                wIndex = UEDATX;
+                wIndex |= (UEDATX << 8);
+                wLength = UEDATX;
+                wLength |= (UEDATX << 8);
+                UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
+                if (bRequest == GET_DESCRIPTOR) {
+			list = (const uint8_t *)descriptor_list;
+			for (i=0; ; i++) {
+				if (i >= NUM_DESC_LIST) {
+					UECONX = (1<<STALLRQ)|(1<<EPEN);  //stall
+					return;
+				}
+				desc_val = pgm_read_word(list);
+				if (desc_val != wValue) {
+					list += sizeof(struct descriptor_list_struct);
+					continue;
+				}
+				list += 2;
+				desc_val = pgm_read_word(list);
+				if (desc_val != wIndex) {
+					list += sizeof(struct descriptor_list_struct)-2;
+					continue;
+				}
+				list += 2;
+				desc_addr = (const uint8_t *)pgm_read_word(list);
+				list += 2;
+				desc_length = pgm_read_byte(list);
+				break;
+			}
+			len = (wLength < 256) ? wLength : 255;
+			if (len > desc_length) len = desc_length;
+			do {
+				// wait for host ready for IN packet
+				do {
+					i = UEINTX;
+				} while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
+				if (i & (1<<RXOUTI)) return;	// abort
+				// send IN packet
+				n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
+				for (i = n; i; i--) {
+					UEDATX = pgm_read_byte(desc_addr++);
+				}
+				len -= n;
+				usb_send_in();
+			} while (len || n == ENDPOINT0_SIZE);
+			return;
+                }
+		if (bRequest == SET_ADDRESS) {
+			usb_send_in();
+			usb_wait_in_ready();
+			UDADDR = wValue | (1<<ADDEN);
+			return;
+		}
+		if (bRequest == SET_CONFIGURATION && bmRequestType == 0) {
+			usb_configuration = wValue;
+			usb_send_in();
+			cfg = endpoint_config_table;
+			for (i=1; i<=MAX_ENDPOINT; i++) {
+				UENUM = i;
+				en = pgm_read_byte(cfg++);
+                                if (en) {
+                                    UECONX = (1<<EPEN);
+                                    UECFG0X = pgm_read_byte(cfg++);
+                                    UECFG1X = pgm_read_byte(cfg++);
+                                } else {
+                                    UECONX = 0;
+				}
+			}
+        		UERST = UERST_MASK;
+        		UERST = 0;
+			return;
+		}
+		if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
+			usb_wait_in_ready();
+			UEDATX = usb_configuration;
+			usb_send_in();
+			return;
+		}
+
+		if (bRequest == GET_STATUS) {
+			usb_wait_in_ready();
+			i = 0;
+			#ifdef SUPPORT_ENDPOINT_HALT
+			if (bmRequestType == 0x82) {
+				UENUM = wIndex;
+				if (UECONX & (1<<STALLRQ)) i = 1;
+				UENUM = 0;
+			}
+			#endif
+			UEDATX = i;
+			UEDATX = 0;
+			usb_send_in();
+			return;
+		}
+		if (bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE) {
+#ifdef SUPPORT_ENDPOINT_HALT
+		    if (bmRequestType == 0x02 && wValue == ENDPOINT_HALT) {
+			i = wIndex & 0x7F;
+			if (i >= 1 && i <= MAX_ENDPOINT) {
+				usb_send_in();
+				UENUM = i;
+				if (bRequest == SET_FEATURE) {
+					UECONX = (1<<STALLRQ)|(1<<EPEN);
+				} else {
+					UECONX = (1<<STALLRQC)|(1<<RSTDT)|(1<<EPEN);
+					UERST = (1 << i);
+					UERST = 0;
+				}
+				return;
+			}
+                    }
+#endif
+                    if (bmRequestType == 0x00 && wValue == DEVICE_REMOTE_WAKEUP) {
+                        if (bRequest == SET_FEATURE) {
+                            remote_wakeup = true;   
+                        } else {
+                            remote_wakeup = false;
+                        }
+                        usb_send_in();
+                        return;
+                    }
+		}
+		if (wIndex == KBD_INTERFACE) {
+			if (bmRequestType == 0xA1) {
+				if (bRequest == HID_GET_REPORT) {
+					usb_wait_in_ready();
+					UEDATX = keyboard_report->mods;
+					UEDATX = 0;
+					for (i=0; i<6; i++) {
+						UEDATX = keyboard_report->keys[i];
+					}
+					usb_send_in();
+					return;
+				}
+				if (bRequest == HID_GET_IDLE) {
+					usb_wait_in_ready();
+					UEDATX = usb_keyboard_idle_config;
+					usb_send_in();
+					return;
+				}
+				if (bRequest == HID_GET_PROTOCOL) {
+					usb_wait_in_ready();
+					UEDATX = usb_keyboard_protocol;
+					usb_send_in();
+					return;
+				}
+			}
+			if (bmRequestType == 0x21) {
+				if (bRequest == HID_SET_REPORT) {
+					usb_wait_receive_out();
+					usb_keyboard_leds = UEDATX;
+					usb_ack_out();
+					usb_send_in();
+					return;
+				}
+				if (bRequest == HID_SET_IDLE) {
+					usb_keyboard_idle_config = (wValue >> 8);
+					usb_keyboard_idle_count = 0;
+					//usb_wait_in_ready();
+					usb_send_in();
+					return;
+				}
+				if (bRequest == HID_SET_PROTOCOL) {
+					usb_keyboard_protocol = wValue;
+					//usb_wait_in_ready();
+					usb_send_in();
+					return;
+				}
+			}
+		}
+#ifdef MOUSE_ENABLE
+		if (wIndex == MOUSE_INTERFACE) {
+			if (bmRequestType == 0xA1) {
+				if (bRequest == HID_GET_REPORT) {
+                                    if (wValue == HID_REPORT_INPUT) {
+					usb_wait_in_ready();
+					UEDATX = 0;
+					UEDATX = 0;
+					UEDATX = 0;
+					UEDATX = 0;
+					usb_send_in();
+					return;
+                                    }
+                                    if (wValue == HID_REPORT_FEATURE) {
+					usb_wait_in_ready();
+					UEDATX = 0x05;
+					usb_send_in();
+					return;
+                                    }
+				}
+				if (bRequest == HID_GET_PROTOCOL) {
+					usb_wait_in_ready();
+					UEDATX = usb_mouse_protocol;
+					usb_send_in();
+					return;
+				}
+			}
+			if (bmRequestType == 0x21) {
+				if (bRequest == HID_SET_PROTOCOL) {
+					usb_mouse_protocol = wValue;
+					usb_send_in();
+					return;
+				}
+			}
+		}
+#endif
+		if (wIndex == DEBUG_INTERFACE) {
+			if (bRequest == HID_GET_REPORT && bmRequestType == 0xA1) {
+				len = wLength;
+				do {
+					// wait for host ready for IN packet
+					do {
+						i = UEINTX;
+					} while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
+					if (i & (1<<RXOUTI)) return;	// abort
+					// send IN packet
+					n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
+					for (i = n; i; i--) {
+						UEDATX = 0;
+					}
+					len -= n;
+					usb_send_in();
+				} while (len || n == ENDPOINT0_SIZE);
+				return;
+			}
+		}
+	}
+	UECONX = (1<<STALLRQ) | (1<<EPEN);	// stall
+}
diff --git a/protocol/pjrc/usb.h b/protocol/pjrc/usb.h
new file mode 100644
index 0000000000..0eb58fc395
--- /dev/null
+++ b/protocol/pjrc/usb.h
@@ -0,0 +1,137 @@
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_H
+#define  USB_H 1
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+
+
+extern bool remote_wakeup;
+extern bool suspend;
+
+void usb_init(void);			// initialize everything
+uint8_t usb_configured(void);		// is the USB port configured
+void usb_remote_wakeup(void);
+
+
+#define EP_TYPE_CONTROL			0x00
+#define EP_TYPE_BULK_IN			0x81
+#define EP_TYPE_BULK_OUT		0x80
+#define EP_TYPE_INTERRUPT_IN		0xC1
+#define EP_TYPE_INTERRUPT_OUT		0xC0
+#define EP_TYPE_ISOCHRONOUS_IN		0x41
+#define EP_TYPE_ISOCHRONOUS_OUT		0x40
+
+#define EP_SINGLE_BUFFER		0x02
+#define EP_DOUBLE_BUFFER		0x06
+
+#define EP_SIZE(s)	((s) == 64 ? 0x30 :	\
+			((s) == 32 ? 0x20 :	\
+			((s) == 16 ? 0x10 :	\
+			             0x00)))
+
+#if defined (__AVR_AT90USB162__) || defined (__AVR_AT90USB82__)
+#   define MAX_ENDPOINT     4
+#   define UERST_MASK       0x1E
+#else
+#   define MAX_ENDPOINT     6
+#   define UERST_MASK       0x7E
+#endif
+
+#define LSB(n) (n & 255)
+#define MSB(n) ((n >> 8) & 255)
+
+#if defined(__AVR_AT90USB162__)
+#define HW_CONFIG() 
+#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
+#define USB_CONFIG() (USBCON = (1<<USBE))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_ATmega32U4__)
+#define HW_CONFIG() (UHWCON = 0x01)
+#define PLL_CONFIG() (PLLCSR = 0x12)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB646__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x1A)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB1286__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x16)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#endif
+
+// standard control endpoint request types
+#define GET_STATUS			0
+#define CLEAR_FEATURE			1
+#define SET_FEATURE			3
+#define SET_ADDRESS			5
+#define GET_DESCRIPTOR			6
+#define GET_CONFIGURATION		8
+#define SET_CONFIGURATION		9
+#define GET_INTERFACE			10
+#define SET_INTERFACE			11
+// HID (human interface device)
+#define HID_GET_REPORT			1
+#define HID_GET_IDLE			2
+#define HID_GET_PROTOCOL		3
+#define HID_SET_REPORT			9
+#define HID_SET_IDLE			10
+#define HID_SET_PROTOCOL		11
+#define HID_REPORT_INPUT		1
+#define HID_REPORT_OUTPUT		2
+#define HID_REPORT_FEATURE		3
+// CDC (communication class device)
+#define CDC_SET_LINE_CODING		0x20
+#define CDC_GET_LINE_CODING		0x21
+#define CDC_SET_CONTROL_LINE_STATE	0x22
+// HID feature selectors
+#define DEVICE_REMOTE_WAKEUP		1
+#define ENDPOINT_HALT			0
+#define TEST_MODE			2
+
+
+/*------------------------------------------------------------------*
+ * Keyboard descriptor setting
+ *------------------------------------------------------------------*/
+#define KBD_INTERFACE		0
+#define KBD_ENDPOINT		1
+#define KBD_SIZE		8
+#define KBD_BUFFER		EP_DOUBLE_BUFFER
+#define KBD_REPORT_KEYS		(KBD_SIZE - 2)
+
+// secondary keyboard
+#ifdef NKRO_ENABLE
+#define KBD2_INTERFACE		4
+#define KBD2_ENDPOINT		5
+#define KBD2_SIZE		16
+#define KBD2_BUFFER		EP_DOUBLE_BUFFER
+#define KBD2_REPORT_KEYS	(KBD2_SIZE - 1)
+#endif
+
+#endif
diff --git a/protocol/pjrc/usb_debug.c b/protocol/pjrc/usb_debug.c
new file mode 100644
index 0000000000..c1e6f6544b
--- /dev/null
+++ b/protocol/pjrc/usb_debug.c
@@ -0,0 +1,102 @@
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <avr/interrupt.h>
+#include "sendchar.h"
+#include "usb_debug.h"
+
+
+// the time remaining before we transmit any partially full
+// packet, or send a zero length packet.
+volatile uint8_t debug_flush_timer=0;
+
+
+int8_t sendchar(uint8_t c)
+{
+	static uint8_t previous_timeout=0;
+	uint8_t timeout, intr_state;
+
+	// if we're not online (enumerated and configured), error
+	if (!usb_configured()) return -1;
+	// interrupts are disabled so these functions can be
+	// used from the main program or interrupt context,
+	// even both in the same program!
+	intr_state = SREG;
+	cli();
+	UENUM = DEBUG_TX_ENDPOINT;
+	// if we gave up due to timeout before, don't wait again
+	if (previous_timeout) {
+		if (!(UEINTX & (1<<RWAL))) {
+			SREG = intr_state;
+			return -1;
+		}
+		previous_timeout = 0;
+	}
+	// wait for the FIFO to be ready to accept data
+	timeout = UDFNUML + 4;
+	while (1) {
+		// are we ready to transmit?
+		if (UEINTX & (1<<RWAL)) break;
+		SREG = intr_state;
+		// have we waited too long?
+		if (UDFNUML == timeout) {
+			previous_timeout = 1;
+			return -1;
+		}
+		// has the USB gone offline?
+		if (!usb_configured()) return -1;
+		// get ready to try checking again
+		intr_state = SREG;
+		cli();
+		UENUM = DEBUG_TX_ENDPOINT;
+	}
+	// actually write the byte into the FIFO
+	UEDATX = c;
+	// if this completed a packet, transmit it now!
+	if (!(UEINTX & (1<<RWAL))) {
+		UEINTX = 0x3A;
+		debug_flush_timer = 0;
+	} else {
+		debug_flush_timer = 2;
+	}
+	SREG = intr_state;
+	return 0;
+}
+
+// immediately transmit any buffered output.
+void usb_debug_flush_output(void)
+{
+	uint8_t intr_state;
+
+	intr_state = SREG;
+	cli();
+	if (debug_flush_timer) {
+		UENUM = DEBUG_TX_ENDPOINT;
+		while ((UEINTX & (1<<RWAL))) {
+			UEDATX = 0;
+		}
+		UEINTX = 0x3A;
+		debug_flush_timer = 0;
+	}
+	SREG = intr_state;
+}
diff --git a/protocol/pjrc/usb_debug.h b/protocol/pjrc/usb_debug.h
new file mode 100644
index 0000000000..e70f4ca3a7
--- /dev/null
+++ b/protocol/pjrc/usb_debug.h
@@ -0,0 +1,42 @@
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_DEBUG_H
+#define  USB_DEBUG_H 1
+
+#include <stdint.h>
+#include "usb.h"
+
+
+#define DEBUG_INTERFACE		2
+#define DEBUG_TX_ENDPOINT	3
+#define DEBUG_TX_SIZE		32
+#define DEBUG_TX_BUFFER		EP_DOUBLE_BUFFER
+
+
+extern volatile uint8_t debug_flush_timer;
+
+
+void usb_debug_flush_output(void);	// immediately transmit any buffered output
+
+#endif
diff --git a/protocol/pjrc/usb_extra.c b/protocol/pjrc/usb_extra.c
new file mode 100644
index 0000000000..fe1f422c0d
--- /dev/null
+++ b/protocol/pjrc/usb_extra.c
@@ -0,0 +1,70 @@
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <util/delay.h>
+#include <avr/interrupt.h>
+#include "host.h"
+#include "usb_extra.h"
+
+
+int8_t usb_extra_send(uint8_t report_id, uint16_t data)
+{
+	uint8_t intr_state, timeout;
+
+	if (!usb_configured()) return -1;
+	intr_state = SREG;
+	cli();
+	UENUM = EXTRA_ENDPOINT;
+	timeout = UDFNUML + 50;
+	while (1) {
+		// are we ready to transmit?
+		if (UEINTX & (1<<RWAL)) break;
+		SREG = intr_state;
+		// has the USB gone offline?
+		if (!usb_configured()) return -1;
+		// have we waited too long?
+		if (UDFNUML == timeout) return -1;
+		// get ready to try checking again
+		intr_state = SREG;
+		cli();
+		UENUM = EXTRA_ENDPOINT;
+	}
+
+	UEDATX = report_id;
+        UEDATX = data&0xFF;
+        UEDATX = (data>>8)&0xFF;
+
+	UEINTX = 0x3A;
+	SREG = intr_state;
+	return 0;
+}
+
+int8_t usb_extra_consumer_send(uint16_t bits)
+{
+	return usb_extra_send(REPORT_ID_CONSUMER, bits);
+}
+
+int8_t usb_extra_system_send(uint16_t bits)
+{
+	return usb_extra_send(REPORT_ID_SYSTEM, bits);
+}
diff --git a/protocol/pjrc/usb_extra.h b/protocol/pjrc/usb_extra.h
new file mode 100644
index 0000000000..042ac48373
--- /dev/null
+++ b/protocol/pjrc/usb_extra.h
@@ -0,0 +1,46 @@
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_EXTRA_H
+#define  USB_EXTRA_H 1
+/*
+ * Enhanced keyboard features for Windows:
+ * Audio control and System control
+ *
+ * http://www.microsoft.com/whdc/archive/w2kbd.mspx
+ */
+
+#include <stdint.h>
+#include "usb.h"
+
+
+#define EXTRA_INTERFACE		3
+#define EXTRA_ENDPOINT		4
+#define EXTRA_SIZE		8
+#define EXTRA_BUFFER		EP_DOUBLE_BUFFER
+
+
+int8_t usb_extra_consumer_send(uint16_t bits);
+int8_t usb_extra_system_send(uint16_t bits);
+
+#endif
diff --git a/protocol/pjrc/usb_keyboard.c b/protocol/pjrc/usb_keyboard.c
new file mode 100644
index 0000000000..e057c77fa1
--- /dev/null
+++ b/protocol/pjrc/usb_keyboard.c
@@ -0,0 +1,120 @@
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "usb_keyboard.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "host.h"
+
+
+// protocol setting from the host.  We use exactly the same report
+// either way, so this variable only stores the setting since we
+// are required to be able to report which setting is in use.
+uint8_t usb_keyboard_protocol=1;
+
+// the idle configuration, how often we send the report to the
+// host (ms * 4) even when it hasn't changed
+// Windows and Linux set 0 while OS X sets 6(24ms) by SET_IDLE request.
+uint8_t usb_keyboard_idle_config=125;
+
+// count until idle timeout
+uint8_t usb_keyboard_idle_count=0;
+
+// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
+volatile uint8_t usb_keyboard_leds=0;
+
+
+static inline int8_t send_report(report_keyboard_t *report, uint8_t endpoint, uint8_t keys_start, uint8_t keys_end);
+
+
+int8_t usb_keyboard_send_report(report_keyboard_t *report)
+{
+    int8_t result = 0;
+
+#ifdef NKRO_ENABLE
+    if (keyboard_nkro)
+        result = send_report(report, KBD2_ENDPOINT, 0, KBD2_REPORT_KEYS);
+    else
+#endif
+    {
+        if (usb_keyboard_protocol)
+            result = send_report(report, KBD_ENDPOINT, 0, KBD_REPORT_KEYS);
+        else
+            result = send_report(report, KBD_ENDPOINT, 0, 6);
+    }
+
+    if (result) return result;
+    usb_keyboard_idle_count = 0;
+    usb_keyboard_print_report(report);
+    return 0;
+}
+
+void usb_keyboard_print_report(report_keyboard_t *report)
+{
+    if (!debug_keyboard) return;
+    print("keys: ");
+    for (int i = 0; i < REPORT_KEYS; i++) { phex(report->keys[i]); print(" "); }
+    print(" mods: "); phex(report->mods); print("\n");
+}
+
+
+static inline int8_t send_report(report_keyboard_t *report, uint8_t endpoint, uint8_t keys_start, uint8_t keys_end)
+{
+    uint8_t intr_state, timeout;
+
+    if (!usb_configured()) return -1;
+    intr_state = SREG;
+    cli();
+    UENUM = endpoint;
+    timeout = UDFNUML + 50;
+    while (1) {
+            // are we ready to transmit?
+            if (UEINTX & (1<<RWAL)) break;
+            SREG = intr_state;
+            // has the USB gone offline?
+            if (!usb_configured()) return -1;
+            // have we waited too long?
+            if (UDFNUML == timeout) return -1;
+            // get ready to try checking again
+            intr_state = SREG;
+            cli();
+            UENUM = endpoint;
+    }
+    UEDATX = report->mods;
+#ifdef NKRO_ENABLE
+    if (!keyboard_nkro)
+        UEDATX = 0;
+#else
+    UEDATX = 0;
+#endif
+    for (uint8_t i = keys_start; i < keys_end; i++) {
+            UEDATX = report->keys[i];
+    }
+    UEINTX = 0x3A;
+    SREG = intr_state;
+    return 0;
+}
diff --git a/protocol/pjrc/usb_keyboard.h b/protocol/pjrc/usb_keyboard.h
new file mode 100644
index 0000000000..c362ca3b86
--- /dev/null
+++ b/protocol/pjrc/usb_keyboard.h
@@ -0,0 +1,42 @@
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_KEYBOARD_H
+#define  USB_KEYBOARD_H 1
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "usb.h"
+#include "host.h"
+
+
+extern uint8_t usb_keyboard_protocol;
+extern uint8_t usb_keyboard_idle_config;
+extern uint8_t usb_keyboard_idle_count;
+extern volatile uint8_t usb_keyboard_leds;
+
+
+int8_t usb_keyboard_send_report(report_keyboard_t *report);
+void usb_keyboard_print_report(report_keyboard_t *report);
+
+#endif
diff --git a/protocol/pjrc/usb_mouse.c b/protocol/pjrc/usb_mouse.c
new file mode 100644
index 0000000000..d81db756f3
--- /dev/null
+++ b/protocol/pjrc/usb_mouse.c
@@ -0,0 +1,81 @@
+/* USB Mouse Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_mouse.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "usb_mouse.h"
+#include "print.h"
+#include "debug.h"
+
+
+uint8_t usb_mouse_protocol=1;
+
+
+int8_t usb_mouse_send(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons)
+{
+	uint8_t intr_state, timeout;
+
+	if (!usb_configured()) return -1;
+	if (x == -128) x = -127;
+	if (y == -128) y = -127;
+	if (wheel_v == -128) wheel_v = -127;
+	if (wheel_h == -128) wheel_h = -127;
+	intr_state = SREG;
+	cli();
+	UENUM = MOUSE_ENDPOINT;
+	timeout = UDFNUML + 50;
+	while (1) {
+		// are we ready to transmit?
+		if (UEINTX & (1<<RWAL)) break;
+		SREG = intr_state;
+		// has the USB gone offline?
+		if (!usb_configured()) return -1;
+		// have we waited too long?
+		if (UDFNUML == timeout) return -1;
+		// get ready to try checking again
+		intr_state = SREG;
+		cli();
+		UENUM = MOUSE_ENDPOINT;
+	}
+	UEDATX = buttons;
+	UEDATX = x;
+	UEDATX = y;
+        if (usb_mouse_protocol) {
+            UEDATX = wheel_v;
+            UEDATX = wheel_h;
+        }
+        
+	UEINTX = 0x3A;
+	SREG = intr_state;
+	return 0;
+}
+
+void usb_mouse_print(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons) {
+    if (!debug_mouse) return;
+    print("usb_mouse[btn|x y v h]: ");
+    phex(buttons); print("|");
+    phex(x); print(" ");
+    phex(y); print(" ");
+    phex(wheel_v); print(" ");
+    phex(wheel_h); print("\n");
+}
diff --git a/protocol/pjrc/usb_mouse.h b/protocol/pjrc/usb_mouse.h
new file mode 100644
index 0000000000..eb3056126d
--- /dev/null
+++ b/protocol/pjrc/usb_mouse.h
@@ -0,0 +1,50 @@
+/* USB Mouse Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_mouse.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_MOUSE_H
+#define  USB_MOUSE_H 1
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "usb.h"
+
+
+#define MOUSE_INTERFACE		1
+#define MOUSE_ENDPOINT		2
+#define MOUSE_SIZE		8
+#define MOUSE_BUFFER		EP_DOUBLE_BUFFER
+
+#define MOUSE_BTN1 (1<<0)
+#define MOUSE_BTN2 (1<<1)
+#define MOUSE_BTN3 (1<<2)
+#define MOUSE_BTN4 (1<<3)
+#define MOUSE_BTN5 (1<<4)
+
+
+extern uint8_t usb_mouse_protocol;
+
+
+int8_t usb_mouse_send(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons);
+void usb_mouse_print(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons);
+
+#endif