[Keyboard] Update Gergo to use newer Ergodox Matrix code (#5703)

* [Keyboard] Update Gergo to use newer Ergodox Matrix code

And update layout macros to be correct

* Almost forgot the json file

* Remove board specific defines for i2c timeout

12 files changed, 317 insertions, 453 deletions

diff --git a/keyboards/gergo/gergo.c b/keyboards/gergo/gergo.c
index cc0bef391d..fab8d0f44c 100644
--- a/keyboards/gergo/gergo.c
+++ b/keyboards/gergo/gergo.c
@@ -43,20 +43,20 @@ uint8_t init_mcp23018(void) {
     // - unused  : input  : 1
     // - input   : input  : 1
     // - driving : output : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT);            if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b10000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);    if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(IODIRA, I2C_TIMEOUT);            if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b10000000, I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b11111111, I2C_TIMEOUT);        if (mcp23018_status) goto out;
     i2c_stop();
 
     // set pull-up
     // - unused  : on  : 1
     // - input   : on  : 1
     // - driving : off : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT);             if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b10000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);    if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(GPPUA, I2C_TIMEOUT);             if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b10000000, I2C_TIMEOUT);        if (mcp23018_status) goto out;
+    mcp23018_status = i2c_write(0b11111111, I2C_TIMEOUT);        if (mcp23018_status) goto out;
 
 out:
     i2c_stop();
diff --git a/keyboards/gergo/gergo.h b/keyboards/gergo/gergo.h
index 0292c512ac..1370325f28 100644
--- a/keyboards/gergo/gergo.h
+++ b/keyboards/gergo/gergo.h
@@ -1,14 +1,14 @@
 #pragma once
-#include <util/delay.h>
+
+#include "quantum.h"
 #include <stdint.h>
 #include <stdbool.h>
-#include "quantum.h"
 #include "i2c_master.h"
-#include "matrix.h"
+#include <util/delay.h>
 
 
 extern i2c_status_t mcp23018_status;
-#define ERGODOX_EZ_I2C_TIMEOUT 1000
+#define I2C_TIMEOUT 1000
 #define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
 #define CPU_16MHz       0x00
 
@@ -26,18 +26,14 @@ extern i2c_status_t mcp23018_status;
 #define OLATA           0x14            // output latch register
 #define OLATB           0x15
 
-void init_ergodox(void);
 uint8_t init_mcp23018(void);
 
 /*  ---------- LEFT HAND -----------   ---------- RIGHT HAND ---------- */
-#define LAYOUT_GERGO(                                                    \
+#define LAYOUT_gergo(                                                    \
     L00,L01,L02,L03,L04,L05,                   R00,R01,R02,R03,R04,R05,  \
     L10,L11,L12,L13,L14,L15,L16,           R10,R11,R12,R13,R14,R15,R16,  \
-    L20,L21,L22,L23,L24,L25,L26,           R20,R21,R22,R23,R24,R25,R26,  \
-                L31,L32,                           R33,R34,              \
-                            L30,           R30,                          \
-                        L33,L34,           R31,R32)                      \
-                                                                         \
+    L20,L21,L22,L23,L24,L25,L26,L30,   R30,R20,R21,R22,R23,R24,R25,R26,  \
+                    L31,L32,L33,L34,   R31,R32,R33,R34)                  \
    /* matrix positions */                                                \
     {                               \
     { KC_NO, L16,   L26,  L30},     \
diff --git a/keyboards/gergo/i2cmaster.h b/keyboards/gergo/i2cmaster.h
deleted file mode 100644
index 72e0508494..0000000000
--- a/keyboards/gergo/i2cmaster.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifndef _I2CMASTER_H
-#define _I2CMASTER_H   1
-/************************************************************************* 
-* Title:    C include file for the I2C master interface 
-*           (i2cmaster.S or twimaster.c)
-* Author:   Peter Fleury <pfleury@gmx.ch>  http://jump.to/fleury
-* File:     $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $
-* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3
-* Target:   any AVR device
-* Usage:    see Doxygen manual
-**************************************************************************/
-
-#ifdef DOXYGEN
-/**
- @defgroup pfleury_ic2master I2C Master library
- @code #include <i2cmaster.h> @endcode
-  
- @brief I2C (TWI) Master Software Library
-
- Basic routines for communicating with I2C slave devices. This single master 
- implementation is limited to one bus master on the I2C bus. 
-
- This I2c library is implemented as a compact assembler software implementation of the I2C protocol 
- which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c).
- Since the API for these two implementations is exactly the same, an application can be linked either against the
- software I2C implementation or the hardware I2C implementation.
-
- Use 4.7k pull-up resistor on the SDA and SCL pin.
- 
- Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module 
- i2cmaster.S to your target when using the software I2C implementation ! 
- 
- Adjust the  CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion.
-
- @note 
-    The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted 
-    to GNU assembler and AVR-GCC C call interface.
-    Replaced the incorrect quarter period delays found in AVR300 with 
-    half period delays. 
-    
- @author Peter Fleury pfleury@gmx.ch  http://jump.to/fleury
-
- @par API Usage Example
-  The following code shows typical usage of this library, see example test_i2cmaster.c
-
- @code
-
- #include <i2cmaster.h>
-
-
- #define Dev24C02  0xA2      // device address of EEPROM 24C02, see datasheet
-
- int main(void)
- {
-     unsigned char ret;
-
-     i2c_init();                             // initialize I2C library
-
-     // write 0x75 to EEPROM address 5 (Byte Write) 
-     i2c_start_wait(Dev24C02+I2C_WRITE);     // set device address and write mode
-     i2c_write(0x05);                        // write address = 5
-     i2c_write(0x75);                        // write value 0x75 to EEPROM
-     i2c_stop();                             // set stop conditon = release bus
-
-
-     // read previously written value back from EEPROM address 5 
-     i2c_start_wait(Dev24C02+I2C_WRITE);     // set device address and write mode
-
-     i2c_write(0x05);                        // write address = 5
-     i2c_rep_start(Dev24C02+I2C_READ);       // set device address and read mode
-
-     ret = i2c_readNak();                    // read one byte from EEPROM
-     i2c_stop();
-
-     for(;;);
- }
- @endcode
-
-*/
-#endif /* DOXYGEN */
-
-/**@{*/
-
-#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304
-#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !"
-#endif
-
-#include <avr/io.h>
-
-/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */
-#define I2C_READ    1
-
-/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */
-#define I2C_WRITE   0
-
-
-/**
- @brief initialize the I2C master interace. Need to be called only once 
- @param  void
- @return none
- */
-void i2c_init(void);
-
-
-/** 
- @brief Terminates the data transfer and releases the I2C bus 
- @param void
- @return none
- */
-void i2c_stop(void);
-
-
-/** 
- @brief Issues a start condition and sends address and transfer direction 
-  
- @param    addr address and transfer direction of I2C device
- @retval   0   device accessible 
- @retval   1   failed to access device 
- */
-unsigned char i2c_start(unsigned char addr);
-
-
-/**
- @brief Issues a repeated start condition and sends address and transfer direction 
-
- @param   addr address and transfer direction of I2C device
- @retval  0 device accessible
- @retval  1 failed to access device
- */
-unsigned char i2c_rep_start(unsigned char addr);
-
-
-/**
- @brief Issues a start condition and sends address and transfer direction 
-   
- If device is busy, use ack polling to wait until device ready 
- @param    addr address and transfer direction of I2C device
- @return   none
- */
-void i2c_start_wait(unsigned char addr);
-
- 
-/**
- @brief Send one byte to I2C device
- @param    data  byte to be transfered
- @retval   0 write successful
- @retval   1 write failed
- */
-unsigned char i2c_write(unsigned char data);
-
-
-/**
- @brief    read one byte from the I2C device, request more data from device 
- @return   byte read from I2C device
- */
-unsigned char i2c_readAck(void);
-
-/**
- @brief    read one byte from the I2C device, read is followed by a stop condition 
- @return   byte read from I2C device
- */
-unsigned char i2c_readNak(void);
-
-/** 
- @brief    read one byte from the I2C device
- 
- Implemented as a macro, which calls either i2c_readAck or i2c_readNak
- 
- @param    ack 1 send ack, request more data from device<br>
-               0 send nak, read is followed by a stop condition 
- @return   byte read from I2C device
- */
-unsigned char i2c_read(unsigned char ack);
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak(); 
-
-
-/**@}*/
-#endif
diff --git a/keyboards/gergo/info.json b/keyboards/gergo/info.json
index cacbda4239..586b9c9081 100644
--- a/keyboards/gergo/info.json
+++ b/keyboards/gergo/info.json
@@ -5,7 +5,7 @@
     "keyboard_name": "Gergo",
     "url": "http://gboards.ca",
     "layouts": {
-        "LAYOUT_GERGO": {
+        "LAYOUT_gergo": {
             "layout": [
                 {
                     "label": "L00",
@@ -181,6 +181,16 @@
                     "y": 1.75
                 },
                 {
+                    "label": "L30",
+                    "x": 8.25,
+                    "y": 2.75
+                },
+                {
+                    "label": "R30",
+                    "x": 10.25,
+                    "y": 2.75
+                },
+                {
                     "h": 1.5,
                     "label": "R20",
                     "x": 12,
@@ -228,26 +238,6 @@
                     "y": 3.63
                 },
                 {
-                    "label": "R33",
-                    "x": 12.5,
-                    "y": 3.63
-                },
-                {
-                    "label": "R34",
-                    "x": 13.75,
-                    "y": 3.25
-                },
-                {
-                    "label": "L30",
-                    "x": 8.25,
-                    "y": 2.75
-                },
-                {
-                    "label": "R30",
-                    "x": 10.25,
-                    "y": 2.75
-                },
-                {
                     "h": 2,
                     "label": "L33",
                     "x": 7.25,
@@ -270,6 +260,16 @@
                     "label": "R32",
                     "x": 11.25,
                     "y": 3.75
+                },
+                {
+                    "label": "R33",
+                    "x": 12.5,
+                    "y": 3.63
+                },
+                {
+                    "label": "R34",
+                    "x": 13.75,
+                    "y": 3.25
                 }
             ]
         }
diff --git a/keyboards/gergo/keymaps/default/config.h b/keyboards/gergo/keymaps/default/config.h
new file mode 100644
index 0000000000..6393d46f14
--- /dev/null
+++ b/keyboards/gergo/keymaps/default/config.h
@@ -0,0 +1,3 @@
+#pragma once
+
+#define IGNORE_MOD_TAP_INTERRUPT
diff --git a/keyboards/gergo/keymaps/default/keymap.c b/keyboards/gergo/keymaps/default/keymap.c
index fabd945fef..8e26223f17 100644
--- a/keyboards/gergo/keymaps/default/keymap.c
+++ b/keyboards/gergo/keymaps/default/keymap.c
@@ -1,4 +1,4 @@
-/* Good on you for modifying your layout! if you don't have 
+/* Good on you for modifying your layout! if you don't have
  * time to read the QMK docs, a list of keycodes can be found at
  *
  * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
@@ -8,7 +8,6 @@
 
 #include QMK_KEYBOARD_H
 
-#define IGNORE_MOD_TAP_INTERRUPT
 #define BASE 0 // default layer
 #define SYMB 1 // symbols
 #define NUMB 2 // numbers/motion
@@ -41,15 +40,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |       |                      |       |      |
  *                                 `--------------'                      `--------------'
  */
-[BASE] = LAYOUT_GERGO(  
-LT(NUMB, KC_ESC),       KC_Q,  KC_W,   KC_E,   KC_R, KC_T,                       KC_Y,    KC_U, KC_I, KC_O,   KC_P,    KC_PIPE, 
-MT(MOD_LCTL, KC_BSPC),  KC_A,  KC_S,   KC_D,   KC_F, KC_G, KC_BTN2,       KC_TRNS,  KC_H,    KC_J, KC_K, KC_L,   KC_SCLN, KC_QUOT, 
-KC_RSFT,                KC_Z,  KC_X,   KC_C,   KC_V, KC_B, KC_BTN1,       KC_BSPC,  KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS, 
-                                      
-			              MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT),       KC_TAB, KC_BSPC,
-
-                                                           KC_BTN3,       KC_PGDN,
-                                LT(SYMB, KC_SPC), LT(NUMB, KC_ESC),       LT(SYMB, KC_ENT), LT(NUMB, KC_SPC)),
+[BASE] = LAYOUT_gergo(
+    LT(NUMB, KC_ESC),       KC_Q,  KC_W,   KC_E,   KC_R, KC_T,                                          KC_Y,    KC_U, KC_I, KC_O,   KC_P,    KC_PIPE,
+    MT(MOD_LCTL, KC_BSPC),  KC_A,  KC_S,   KC_D,   KC_F, KC_G, KC_BTN2,                       KC_TRNS,  KC_H,    KC_J, KC_K, KC_L,   KC_SCLN, KC_QUOT,
+    KC_RSFT,                KC_Z,  KC_X,   KC_C,   KC_V, KC_B, KC_BTN1, KC_BTN3,     KC_PGDN, KC_BSPC,  KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
+  MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), LT(SYMB, KC_SPC), LT(NUMB, KC_ESC),    LT(SYMB, KC_ENT), LT(NUMB, KC_SPC), KC_TAB, KC_BSPC
+    ),
 /* Keymap 1: Symbols layer
  *
  * ,-------------------------------------------.                         ,-------------------------------------------.
@@ -70,14 +66,12 @@ KC_RSFT,                KC_Z,  KC_X,   KC_C,   KC_V, KC_B, KC_BTN1,       KC_BSP
  *                                 |      |       |                     |       |      |
  *                                 `--------------'                     `--------------'
  */
-[SYMB] = LAYOUT_GERGO(  
-KC_TRNS, KC_EXLM, KC_AT,  KC_LCBR,KC_RCBR, KC_PIPE,                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, 
-KC_TRNS, KC_HASH, KC_DLR, KC_LPRN,KC_RPRN, KC_GRV,  KC_TRNS,       KC_TRNS,  KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT, 
-KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS,       KC_TRNS,  KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS, 
-
-                                                  KC_TRNS, KC_TRNS,       KC_PGUP, KC_DEL,
-                                                           KC_TRNS,       KC_TRNS,
-                                             	  KC_SCLN, KC_EQL,        KC_EQL, KC_SCLN),
+[SYMB] = LAYOUT_gergo(
+    KC_TRNS, KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE,                                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
+    KC_TRNS, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,  KC_TRNS,                          KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
+    KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS,        KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+                                        KC_TRNS, KC_TRNS, KC_SCLN, KC_EQL,         KC_EQL,  KC_SCLN, KC_PGUP, KC_DEL
+    ),
 /* Keymap 2: Pad/Function layer
  *
  * ,-------------------------------------------.                         ,-------------------------------------------.
@@ -98,17 +92,15 @@ KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS,       KC_TRNS,  KC_
  *                                 |      |       |                     |       |      |
  *                                 `--------------'                     `--------------'
  */
-[NUMB] = LAYOUT_GERGO(  
-KC_TRNS, KC_1, 	  KC_2,    KC_3,    KC_4,    KC_5,                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_TRNS, 
-KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,         KC_TRNS,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_VOLD, KC_VOLU, 
-KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,        KC_TRNS,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT, 
-
-                                                  KC_TRNS, KC_TRNS,       KC_PGUP, KC_TRNS,
-                                                           KC_TRNS,       KC_TRNS,
-                                             	  KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS)
+[NUMB] = LAYOUT_gergo(
+    KC_TRNS, KC_1, 	  KC_2,    KC_3,    KC_4,    KC_5,                                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_TRNS,
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                         KC_TRNS,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_VOLD, KC_VOLU,
+    KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS,     KC_TRNS, KC_TRNS,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT,
+                                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS
+    ),
 };
 
-/* Keymap template 
+/* Keymap template
  *
  * ,-------------------------------------------.                         ,-------------------------------------------.
  * |        |      |      |      |      |      |                         |      |      |      |      |      |        |
@@ -127,25 +119,10 @@ KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,        KC_TRNS,  K
  *                                 |      |       |       |       |      |
  *                                 |      |       |       |       |      |
  *                                 `--------------'       `--------------'
-[SYMB] = LAYOUT_GERGO(  
-KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, 
-
-                                                  KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS,
-                                                           KC_TRNS,       KC_TRNS,
-                                             	  KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS),
+[SYMB] = LAYOUT_gergo(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                           KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
  */
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-    //uint8_t layer = biton32(layer_state);
-    biton32(layer_state);
-};
-
-
diff --git a/keyboards/gergo/keymaps/drashna/keymap.c b/keyboards/gergo/keymaps/drashna/keymap.c
new file mode 100644
index 0000000000..a882ff72d9
--- /dev/null
+++ b/keyboards/gergo/keymaps/drashna/keymap.c
@@ -0,0 +1,119 @@
+/* Good on you for modifying your layout! if you don't have
+ * time to read the QMK docs, a list of keycodes can be found at
+ *
+ * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
+ *
+ * There's also a template for adding new layers at the bottom of this file!
+ */
+
+#include QMK_KEYBOARD_H
+#include "drashna.h"
+
+// Blank template at the bottom
+
+enum customKeycodes {
+	URL  = 1
+};
+
+#define LAYOUT_gergo_wrapper(...)       LAYOUT_gergo(__VA_ARGS__)
+#define LAYOUT_gergo_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_gergo_wrapper( \
+    KC_ESC,  K01,    K02,     K03,      K04,     K05,                                              K06,     K07,     K08,     K09,     K0A,    KC_PIPE,      \
+    KC_TAB, ALT_T(K11),  K12, K13,      K14,     K15,   _______,                         _______,  K16,     K17,     K18,     K19,     K1A, RGUI_T(KC_QUOT), \
+    OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,   _______, _______,       _______, _______,  K26,     K27,     K28,     K29, CTL_T(K2A), OS_RSFT,      \
+                            _______, _______, KC_SPC, LT(_LOWER, KC_BSPC),      LT(_RAISE, KC_DEL), KC_ENT, _______, _______                            \
+    )
+
+#define LAYOUT_gergo_base_wrapper(...)       LAYOUT_gergo_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_QWERTY] = LAYOUT_gergo_base_wrapper(
+        _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+        _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+        _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+        ),
+    [_COLEMAK] = LAYOUT_gergo_base_wrapper(
+        _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+        _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+        _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+    ),
+
+    [_DVORAK] = LAYOUT_gergo_base_wrapper(
+        _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+        _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+        _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+    ),
+
+    [_WORKMAN] = LAYOUT_gergo_base_wrapper(
+        _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+        _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+        _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+    ),
+
+    [_NORMAN] = LAYOUT_gergo_base_wrapper(
+        _________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
+        _________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
+        _________________NORMAN_L3_________________, _________________NORMAN_R3_________________
+    ),
+
+    [_MALTRON] = LAYOUT_gergo_base_wrapper(
+        _________________MALTRON_L1________________, _________________MALTRON_R1________________,
+        _________________MALTRON_L2________________, _________________MALTRON_R2________________,
+        _________________MALTRON_L3________________, _________________MALTRON_R3________________
+    ),
+
+    [_EUCALYN] = LAYOUT_gergo_base_wrapper(
+        _________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
+        _________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
+        _________________EUCALYN_L3________________, _________________EUCALYN_R3________________
+    ),
+
+    [_CARPLAX] = LAYOUT_gergo_base_wrapper(
+        _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
+        _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
+        _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
+    ),
+
+    [_MODS] = LAYOUT_gergo_wrapper(
+        _______, ___________________BLANK___________________,                                           ___________________BLANK___________________, _______,
+        _______, ___________________BLANK___________________, _______,                         _______, ___________________BLANK___________________, _______,
+        KC_LSFT, ___________________BLANK___________________, _______, _______,       _______, _______, ___________________BLANK___________________, KC_RSFT,
+                                            _______, _______, _______, _______,       _______, _______, _______, _______
+        ),
+    [_LOWER] = LAYOUT_gergo_wrapper(
+        KC_F12,  _________________LOWER_L1__________________,                                           _________________LOWER_R1__________________, KC_F11,
+        _______, _________________LOWER_L2__________________, _______,                         _______, _________________LOWER_R2__________________, KC_PIPE,
+        _______, _________________LOWER_L3__________________, _______, _______,       _______, _______, _________________LOWER_R3__________________, _______,
+                                            _______, _______, _______, _______,       _______, _______, _______, _______
+        ),
+
+    [_RAISE] = LAYOUT_gergo_wrapper(
+        _______, _________________RAISE_L1__________________,                                           _________________RAISE_R1__________________, _______,
+        _______, _________________RAISE_L2__________________, _______,                         _______, _________________RAISE_R2__________________, KC_BSLS,
+        _______, _________________RAISE_L3__________________, _______, _______,       _______, _______, _________________RAISE_R3__________________, _______,
+                                            _______, _______, _______, _______,       _______, _______, _______, _______
+        ),
+
+    [_ADJUST] = LAYOUT_gergo_wrapper(
+        KC_MAKE, _________________ADJUST_L1_________________,                                           _________________ADJUST_R1_________________, KC_RESET,
+        VRSN,    _________________ADJUST_L2_________________, _______,                         KC_NUKE, _________________ADJUST_R2_________________, EEP_RST,
+        _______, _________________ADJUST_L3_________________, _______, _______,       _______, _______, _________________ADJUST_R3_________________, TG_MODS,
+                                            _______, _______, _______, _______,       _______, _______, _______, _______
+        ),
+
+};
+
+/* Keymap template
+
+    [SYMB] = LAYOUT_gergo_wrapper(
+        _______, _______, _______, _______, _______, _______,                                           _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                         _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, _______, _______, _______, _______,
+                                            _______, _______, _______, _______,       _______, _______, _______, _______
+        ),
+
+    */
diff --git a/keyboards/gergo/keymaps/drashna/rules.mk b/keyboards/gergo/keymaps/drashna/rules.mk
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/keyboards/gergo/keymaps/drashna/rules.mk
diff --git a/keyboards/gergo/keymaps/germ/config.h b/keyboards/gergo/keymaps/germ/config.h
new file mode 100644
index 0000000000..6393d46f14
--- /dev/null
+++ b/keyboards/gergo/keymaps/germ/config.h
@@ -0,0 +1,3 @@
+#pragma once
+
+#define IGNORE_MOD_TAP_INTERRUPT
diff --git a/keyboards/gergo/keymaps/germ/keymap.c b/keyboards/gergo/keymaps/germ/keymap.c
index fabd945fef..8e26223f17 100644
--- a/keyboards/gergo/keymaps/germ/keymap.c
+++ b/keyboards/gergo/keymaps/germ/keymap.c
@@ -1,4 +1,4 @@
-/* Good on you for modifying your layout! if you don't have 
+/* Good on you for modifying your layout! if you don't have
  * time to read the QMK docs, a list of keycodes can be found at
  *
  * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
@@ -8,7 +8,6 @@
 
 #include QMK_KEYBOARD_H
 
-#define IGNORE_MOD_TAP_INTERRUPT
 #define BASE 0 // default layer
 #define SYMB 1 // symbols
 #define NUMB 2 // numbers/motion
@@ -41,15 +40,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 |      |       |                      |       |      |
  *                                 `--------------'                      `--------------'
  */
-[BASE] = LAYOUT_GERGO(  
-LT(NUMB, KC_ESC),       KC_Q,  KC_W,   KC_E,   KC_R, KC_T,                       KC_Y,    KC_U, KC_I, KC_O,   KC_P,    KC_PIPE, 
-MT(MOD_LCTL, KC_BSPC),  KC_A,  KC_S,   KC_D,   KC_F, KC_G, KC_BTN2,       KC_TRNS,  KC_H,    KC_J, KC_K, KC_L,   KC_SCLN, KC_QUOT, 
-KC_RSFT,                KC_Z,  KC_X,   KC_C,   KC_V, KC_B, KC_BTN1,       KC_BSPC,  KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS, 
-                                      
-			              MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT),       KC_TAB, KC_BSPC,
-
-                                                           KC_BTN3,       KC_PGDN,
-                                LT(SYMB, KC_SPC), LT(NUMB, KC_ESC),       LT(SYMB, KC_ENT), LT(NUMB, KC_SPC)),
+[BASE] = LAYOUT_gergo(
+    LT(NUMB, KC_ESC),       KC_Q,  KC_W,   KC_E,   KC_R, KC_T,                                          KC_Y,    KC_U, KC_I, KC_O,   KC_P,    KC_PIPE,
+    MT(MOD_LCTL, KC_BSPC),  KC_A,  KC_S,   KC_D,   KC_F, KC_G, KC_BTN2,                       KC_TRNS,  KC_H,    KC_J, KC_K, KC_L,   KC_SCLN, KC_QUOT,
+    KC_RSFT,                KC_Z,  KC_X,   KC_C,   KC_V, KC_B, KC_BTN1, KC_BTN3,     KC_PGDN, KC_BSPC,  KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_MINS,
+  MT(MOD_LGUI, KC_DEL), MT(MOD_LALT, KC_ENT), LT(SYMB, KC_SPC), LT(NUMB, KC_ESC),    LT(SYMB, KC_ENT), LT(NUMB, KC_SPC), KC_TAB, KC_BSPC
+    ),
 /* Keymap 1: Symbols layer
  *
  * ,-------------------------------------------.                         ,-------------------------------------------.
@@ -70,14 +66,12 @@ KC_RSFT,                KC_Z,  KC_X,   KC_C,   KC_V, KC_B, KC_BTN1,       KC_BSP
  *                                 |      |       |                     |       |      |
  *                                 `--------------'                     `--------------'
  */
-[SYMB] = LAYOUT_GERGO(  
-KC_TRNS, KC_EXLM, KC_AT,  KC_LCBR,KC_RCBR, KC_PIPE,                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, 
-KC_TRNS, KC_HASH, KC_DLR, KC_LPRN,KC_RPRN, KC_GRV,  KC_TRNS,       KC_TRNS,  KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT, 
-KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS,       KC_TRNS,  KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS, 
-
-                                                  KC_TRNS, KC_TRNS,       KC_PGUP, KC_DEL,
-                                                           KC_TRNS,       KC_TRNS,
-                                             	  KC_SCLN, KC_EQL,        KC_EQL, KC_SCLN),
+[SYMB] = LAYOUT_gergo(
+    KC_TRNS, KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE,                                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
+    KC_TRNS, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,  KC_TRNS,                          KC_TRNS, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
+    KC_TRNS, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, KC_TRNS, KC_TRNS,        KC_TRNS, KC_TRNS, KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+                                        KC_TRNS, KC_TRNS, KC_SCLN, KC_EQL,         KC_EQL,  KC_SCLN, KC_PGUP, KC_DEL
+    ),
 /* Keymap 2: Pad/Function layer
  *
  * ,-------------------------------------------.                         ,-------------------------------------------.
@@ -98,17 +92,15 @@ KC_TRNS, KC_PERC, KC_CIRC,KC_LBRC,KC_RBRC, KC_TILD, KC_TRNS,       KC_TRNS,  KC_
  *                                 |      |       |                     |       |      |
  *                                 `--------------'                     `--------------'
  */
-[NUMB] = LAYOUT_GERGO(  
-KC_TRNS, KC_1, 	  KC_2,    KC_3,    KC_4,    KC_5,                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_TRNS, 
-KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,         KC_TRNS,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_VOLD, KC_VOLU, 
-KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,        KC_TRNS,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT, 
-
-                                                  KC_TRNS, KC_TRNS,       KC_PGUP, KC_TRNS,
-                                                           KC_TRNS,       KC_TRNS,
-                                             	  KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS)
+[NUMB] = LAYOUT_gergo(
+    KC_TRNS, KC_1, 	  KC_2,    KC_3,    KC_4,    KC_5,                                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_TRNS,
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                         KC_TRNS,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_VOLD, KC_VOLU,
+    KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS,     KC_TRNS, KC_TRNS,  KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_MPLY, KC_MNXT,
+                                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS
+    ),
 };
 
-/* Keymap template 
+/* Keymap template
  *
  * ,-------------------------------------------.                         ,-------------------------------------------.
  * |        |      |      |      |      |      |                         |      |      |      |      |      |        |
@@ -127,25 +119,10 @@ KC_TRNS, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,        KC_TRNS,  K
  *                                 |      |       |       |       |      |
  *                                 |      |       |       |       |      |
  *                                 `--------------'       `--------------'
-[SYMB] = LAYOUT_GERGO(  
-KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, 
-
-                                                  KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS,
-                                                           KC_TRNS,       KC_TRNS,
-                                             	  KC_TRNS, KC_TRNS,       KC_TRNS, KC_TRNS),
+[SYMB] = LAYOUT_gergo(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                             KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                           KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
  */
-
-// Runs just one time when the keyboard initializes.
-void matrix_init_user(void) {
-
-};
-
-// Runs constantly in the background, in a loop.
-void matrix_scan_user(void) {
-    //uint8_t layer = biton32(layer_state);
-    biton32(layer_state);
-};
-
-
diff --git a/keyboards/gergo/matrix.c b/keyboards/gergo/matrix.c
index 9886ecf153..aa1dc4842e 100644
--- a/keyboards/gergo/matrix.c
+++ b/keyboards/gergo/matrix.c
@@ -29,10 +29,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "print.h"
 #include "debug.h"
 #include "util.h"
+#include "debounce.h"
 #include "pointing_device.h"
 #include QMK_KEYBOARD_H
 #ifdef DEBUG_MATRIX_SCAN_RATE
-#include  "timer.h"
+#   include  "timer.h"
 #endif
 
 #ifdef BALLER
@@ -117,12 +118,11 @@ static matrix_row_t raw_matrix[MATRIX_ROWS];
 // Debouncing: store for each key the number of scans until it's eligible to
 // change.  When scanning the matrix, ignore any changes in keys that have
 // already changed in the last DEBOUNCE scans.
-static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS];
 
 static matrix_row_t read_cols(uint8_t row);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
+static void         init_cols(void);
+static void         unselect_rows(void);
+static void         select_row(uint8_t row);
 static void enableInterrupts(void);
 
 static uint8_t mcp23018_reset_loop;
@@ -134,11 +134,9 @@ uint32_t matrix_scan_count;
 #endif
 
 
-__attribute__ ((weak))
-void matrix_init_user(void) {}
+__attribute__ ((weak)) void matrix_init_user(void) {}
 
-__attribute__ ((weak))
-void matrix_scan_user(void) {}
+__attribute__ ((weak)) void matrix_scan_user(void) {}
 
 __attribute__ ((weak))
 void matrix_init_kb(void) {
@@ -150,39 +148,28 @@ void matrix_scan_kb(void) {
   matrix_scan_user();
 }
 
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
+inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
 
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
+inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
 
 
-void matrix_init(void)
-{
+void matrix_init(void) {
     // initialize row and col
     mcp23018_status = init_mcp23018();
     unselect_rows();
     init_cols();
 
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        raw_matrix[i] = 0;
-        for (uint8_t j=0; j < MATRIX_COLS; ++j) {
-            debounce_matrix[i * MATRIX_COLS + j] = 0;
-        }
-    }
+  // initialize matrix state: all keys off
+  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+    matrix[i]     = 0;
+    raw_matrix[i] = 0;
+  }
 
 #ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
+    matrix_timer      = timer_read32();
     matrix_scan_count = 0;
 #endif
+    debounce_init(MATRIX_ROWS);
     matrix_init_quantum();
 }
 
@@ -198,130 +185,120 @@ void matrix_power_up(void) {
     }
 
 #ifdef DEBUG_MATRIX_SCAN_RATE
-    matrix_timer = timer_read32();
+    matrix_timer      = timer_read32();
     matrix_scan_count = 0;
 #endif
 
 }
 
-// Returns a matrix_row_t whose bits are set if the corresponding key should be
-// eligible to change in this scan.
-matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) {
-  matrix_row_t result = 0;
-  matrix_row_t change = rawcols ^ raw_matrix[row];
-  raw_matrix[row] = rawcols;
-  for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
-    if (debounce_matrix[row * MATRIX_COLS + i]) {
-      --debounce_matrix[row * MATRIX_COLS + i];
-    } else {
-      result |= (1 << i);
-    }
-    if (change & (1 << i)) {
-      debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
-    }
+// Reads and stores a row, returning
+// whether a change occurred.
+static inline bool store_raw_matrix_row(uint8_t index) {
+  matrix_row_t temp = read_cols(index);
+  if (raw_matrix[index] != temp) {
+    raw_matrix[index] = temp;
+    return true;
   }
-  return result;
+  return false;
 }
 
-matrix_row_t debounce_read_cols(uint8_t row) {
-  // Read the row without debouncing filtering and store it for later usage.
-  matrix_row_t cols = read_cols(row);
-  // Get the Debounce mask.
-  matrix_row_t mask = debounce_mask(cols, row);
-  // debounce the row and return the result.
-  return (cols & mask) | (matrix[row] & ~mask);;
-}
 
-uint8_t matrix_scan(void)
-{
-  // TODO: Find what is trashing interrupts
-  enableInterrupts();
 
-  // First we handle the mouse inputs
-  #ifdef BALLER
-  uint8_t pBtn   = PINE & TRKBTN;
+uint8_t matrix_scan(void) {
+    // TODO: Find what is trashing interrupts
+    enableInterrupts();
+
+    // First we handle the mouse inputs
+#ifdef BALLER
+    uint8_t pBtn   = PINE & TRKBTN;
 
-  #ifdef DEBUG_BALLER
-  // Compare to previous, mod report
-  if (tbUpCnt + tbDnCnt + tbLtCnt + tbRtCnt != 0)
-    xprintf("U: %d D: %d L: %d R: %d B: %d\n", tbUpCnt, tbDnCnt, tbLtCnt, tbRtCnt, (trkBtnState >> 6));
-  #endif
+    #ifdef DEBUG_BALLER
+    // Compare to previous, mod report
+    if (tbUpCnt + tbDnCnt + tbLtCnt + tbRtCnt != 0)
+        xprintf("U: %d D: %d L: %d R: %d B: %d\n", tbUpCnt, tbDnCnt, tbLtCnt, tbRtCnt, (trkBtnState >> 6));
+    #endif
 
-  // Modify the report
-  report_mouse_t pRprt = pointing_device_get_report();
+    // Modify the report
+    report_mouse_t pRprt = pointing_device_get_report();
 
-  // Scroll by default, move on layer
-  if (layer_state == 0) {
+    // Scroll by default, move on layer
+    if (layer_state == 0) {
 		  pRprt.h += tbLtCnt * SCROLLSTEP; tbLtCnt = 0;
 		  pRprt.h -= tbRtCnt * SCROLLSTEP; tbRtCnt = 0;
 		  pRprt.v -= tbUpCnt * SCROLLSTEP; tbUpCnt = 0;
 		  pRprt.v += tbDnCnt * SCROLLSTEP; tbDnCnt = 0;
-  } else {
+    } else {
 		  pRprt.x -= tbLtCnt * TRKSTEP * (layer_state - 1); tbLtCnt = 0;
 		  pRprt.x += tbRtCnt * TRKSTEP * (layer_state - 1); tbRtCnt = 0;
 		  pRprt.y -= tbUpCnt * TRKSTEP * (layer_state - 1); tbUpCnt = 0;
 		  pRprt.y += tbDnCnt * TRKSTEP * (layer_state - 1); tbDnCnt = 0;
-  }
+    }
 
-  #ifdef DEBUG_BALLER
-  if (pRprt.x != 0 || pRprt.y != 0)
-	xprintf("X: %d Y: %d\n", pRprt.x, pRprt.y);
-  #endif
-
-  if ((pBtn != trkBtnState) && ((pBtn >> 6) == 0))  pRprt.buttons |= MOUSE_BTN1;
-  if ((pBtn != trkBtnState) && ((pBtn >> 6) == 1))  pRprt.buttons &= ~MOUSE_BTN1;
-
-  // Save state, push update
-  if (pRprt.x != 0 || pRprt.y != 0 || pRprt.h != 0 || pRprt.v != 0 || (trkBtnState != pBtn))
-    pointing_device_set_report(pRprt);
-
-  trkBtnState = pBtn;
-  #endif
-
-  // Then the keyboard
-  if (mcp23018_status) { // if there was an error
-      if (++mcp23018_reset_loop == 0) {
-      // if (++mcp23018_reset_loop >= 1300) {
-          // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
-          // this will be approx bit more frequent than once per second
-          print("trying to reset mcp23018\n");
-          mcp23018_status = init_mcp23018();
-          if (mcp23018_status) {
-              print("left side not responding\n");
-          } else {
-              print("left side attached\n");
-          }
-      }
-  }
+#ifdef DEBUG_BALLER
+    if (pRprt.x != 0 || pRprt.y != 0)
+        xprintf("X: %d Y: %d\n", pRprt.x, pRprt.y);
+#endif
+
+    if ((pBtn != trkBtnState) && ((pBtn >> 6) == 0))  pRprt.buttons |= MOUSE_BTN1;
+    if ((pBtn != trkBtnState) && ((pBtn >> 6) == 1))  pRprt.buttons &= ~MOUSE_BTN1;
+
+    // Save state, push update
+    if (pRprt.x != 0 || pRprt.y != 0 || pRprt.h != 0 || pRprt.v != 0 || (trkBtnState != pBtn))
+        pointing_device_set_report(pRprt);
+
+    trkBtnState = pBtn;
+#endif
+
+    // Then the keyboard
+    if (mcp23018_status) {  // if there was an error
+        if (++mcp23018_reset_loop == 0) {
+            // if (++mcp23018_reset_loop >= 1300) {
+            // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
+            // this will be approx bit more frequent than once per second
+            print("trying to reset mcp23018\n");
+            mcp23018_status = init_mcp23018();
+            if (mcp23018_status) {
+                print("left side not responding\n");
+            } else {
+                print("left side attached\n");
+            }
+        }
+    }
 
 #ifdef DEBUG_MATRIX_SCAN_RATE
     matrix_scan_count++;
+
     uint32_t timer_now = timer_read32();
-    if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
+    if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) {
         print("matrix scan frequency: ");
         pdec(matrix_scan_count);
         print("\n");
 
-        matrix_timer = timer_now;
+        matrix_timer      = timer_now;
         matrix_scan_count = 0;
     }
 #endif
+
+    bool changed = false;
     for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
-        select_row(i);
-        // and select on left hand
-        select_row(i + MATRIX_ROWS_PER_SIDE);
+        // select rows from left and right hands
+        uint8_t left_index = i;
+        uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
+        select_row(left_index);
+        select_row(right_index);
+
         // we don't need a 30us delay anymore, because selecting a
         // left-hand row requires more than 30us for i2c.
 
-        // grab cols from left hand
-        matrix[i] = debounce_read_cols(i);
-        // grab cols from right hand
-        matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE);
+        changed |= store_raw_matrix_row(left_index);
+        changed |= store_raw_matrix_row(right_index);
 
         unselect_rows();
     }
 
+    debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
     matrix_scan_quantum();
+
     enableInterrupts();
 
 #ifdef DEBUG_MATRIX
@@ -338,20 +315,11 @@ bool matrix_is_modified(void) // deprecated and evidently not called.
     return true;
 }
 
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
+inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
 
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
+inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
 
-void matrix_print(void)
-{
+void matrix_print(void) {
     print("\nr/c 0123456789ABCDEF\n");
     for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
         phex(row); print(": ");
@@ -360,8 +328,7 @@ void matrix_print(void)
     }
 }
 
-uint8_t matrix_key_count(void)
-{
+uint8_t matrix_key_count(void) {
     uint8_t count = 0;
     for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
         count += bitpop16(matrix[i]);
@@ -370,8 +337,7 @@ uint8_t matrix_key_count(void)
 }
 
 // Remember this means ROWS
-static void  init_cols(void)
-{
+static void  init_cols(void) {
     // init on mcp23018
     // not needed, already done as part of init_mcp23018()
 
@@ -380,17 +346,16 @@ static void  init_cols(void)
     PORTF |=  FMASK;
 }
 
-static matrix_row_t read_cols(uint8_t row)
-{
+static matrix_row_t read_cols(uint8_t row) {
     if (row < 7) {
         if (mcp23018_status) { // if there was an error
             return 0;
         } else {
             uint8_t data = 0;
-            mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
-            mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT);             if (mcp23018_status) goto out;
-            mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT);     if (mcp23018_status) goto out;
-            mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT);                if (mcp23018_status < 0) goto out;
+            mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);    if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(GPIOB, I2C_TIMEOUT);             if (mcp23018_status) goto out;
+            mcp23018_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT);     if (mcp23018_status) goto out;
+            mcp23018_status = i2c_read_nack(I2C_TIMEOUT);                if (mcp23018_status < 0) goto out;
             data = ~((uint8_t)mcp23018_status);
             mcp23018_status = I2C_STATUS_SUCCESS;
         out:
@@ -440,9 +405,9 @@ static void select_row(uint8_t row)
         // select on mcp23018
         if (mcp23018_status) { // do nothing on error
         } else { // set active row low  : 0 // set other rows hi-Z : 1
-            mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
-            mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);                 if (mcp23018_status) goto out;
-            mcp23018_status = i2c_write(0xFF & ~(1<<row), ERGODOX_EZ_I2C_TIMEOUT);      if (mcp23018_status) goto out;
+            mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);        if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(GPIOA, I2C_TIMEOUT);                 if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(0xFF & ~(1<<row), I2C_TIMEOUT);      if (mcp23018_status) goto out;
         out:
             i2c_stop();
         }
diff --git a/keyboards/gergo/rules.mk b/keyboards/gergo/rules.mk
index aadc1c2cee..2ce9e01e6d 100644
--- a/keyboards/gergo/rules.mk
+++ b/keyboards/gergo/rules.mk
@@ -18,3 +18,5 @@ POINTING_DEVICE_ENABLE	= yes
 EXTRAKEY_ENABLE		= yes
 CONSOLE_ENABLE  	= yes
 COMMAND_ENABLE		= yes
+
+DEBOUNCE_TYPE  = eager_pr