Merge branch 'master' into minidox

38 files changed, 28 insertions, 4787 deletions

diff --git a/keyboards/atreus62/pro_micro.h b/keyboards/atreus62/pro_micro.h
deleted file mode 100644
index f9e7ed75d9..0000000000
--- a/keyboards/atreus62/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */
diff --git a/keyboards/ergodox/infinity/animations.c b/keyboards/ergodox/infinity/animations.c
deleted file mode 100644
index ebc08fde36..0000000000
--- a/keyboards/ergodox/infinity/animations.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if defined(VISUALIZER_ENABLE)
-
-#include "animations.h"
-#include "visualizer.h"
-#ifdef LCD_ENABLE
-#include "lcd_keyframes.h"
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
-#include "lcd_backlight_keyframes.h"
-#endif
-
-#ifdef BACKLIGHT_ENABLE
-#include "led_keyframes.h"
-#endif
-
-#include "visualizer_keyframes.h"
-
-
-#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
-
-static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef LCD_ENABLE
-    lcd_keyframe_enable(animation, state);
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
-    backlight_keyframe_enable(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
-    led_keyframe_enable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef LCD_ENABLE
-    lcd_keyframe_disable(animation, state);
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
-    backlight_keyframe_disable(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
-    led_keyframe_disable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef LCD_BACKLIGHT_ENABLE
-    ret |= backlight_keyframe_animate_color(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_in_all(animation, state);
-#endif
-    return ret;
-}
-
-static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef LCD_BACKLIGHT_ENABLE
-    ret |= backlight_keyframe_animate_color(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_out_all(animation, state);
-#endif
-    return ret;
-}
-
-
-// Don't worry, if the startup animation is long, you can use the keyboard like normal
-// during that time
-keyframe_animation_t default_startup_animation = {
-    .num_frames = 3,
-    .loop = false,
-    .frame_lengths = {0, 0, gfxMillisecondsToTicks(5000)},
-    .frame_functions = {
-            keyframe_enable,
-            lcd_keyframe_draw_logo,
-            keyframe_fade_in,
-    },
-};
-
-keyframe_animation_t default_suspend_animation = {
-    .num_frames = 3,
-    .loop = false,
-    .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0},
-    .frame_functions = {
-            lcd_keyframe_display_layer_text,
-            keyframe_fade_out,
-            keyframe_disable,
-    },
-};
-#endif
-
-#if defined(BACKLIGHT_ENABLE)
-#define CROSSFADE_TIME 1000
-#define GRADIENT_TIME 3000
-
-keyframe_animation_t led_test_animation = {
-    .num_frames = 14,
-    .loop = true,
-    .frame_lengths = {
-        gfxMillisecondsToTicks(1000), // fade in
-        gfxMillisecondsToTicks(1000), // no op (leds on)
-        gfxMillisecondsToTicks(1000), // fade out
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // mirror leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // normal leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-
-    },
-    .frame_functions = {
-        led_keyframe_fade_in_all,
-        keyframe_no_operation,
-        led_keyframe_fade_out_all,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_mirror_orientation,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_normal_orientation,
-        led_keyframe_crossfade,
-    },
-};
-#endif
-
-#endif
diff --git a/keyboards/ergodox/infinity/animations.h b/keyboards/ergodox/infinity/animations.h
deleted file mode 100644
index 6d8b9830d9..0000000000
--- a/keyboards/ergodox/infinity/animations.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-
-#include "visualizer.h"
-
-// You can use these default animations, but of course you can also write your own custom ones instead
-extern keyframe_animation_t default_startup_animation;
-extern keyframe_animation_t default_suspend_animation;
-
-// An animation for testing and demonstrating the led support, should probably not be used for real world
-// cases
-extern keyframe_animation_t led_test_animation;
-
-#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/ergodox/infinity/board_is31fl3731c.h
index 2ea73f1fb3..f248cc25ba 100644
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
+++ b/keyboards/ergodox/infinity/board_is31fl3731c.h
@@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = {
   400000 // clock speed (Hz); 400kHz max for IS31
 };
 
-#define GDISP_SCREEN_WIDTH  7
-#define GDISP_SCREEN_HEIGHT 7
-
 static const uint8_t led_mask[] = {
 	0xFF, 0x00, /* C1-1 -> C1-16 */
 	0xFF, 0x00, /* C2-1 -> C2-16 */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/board_st7565.h
index 9650ffb440..9ab636c95d 100644
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
+++ b/keyboards/ergodox/infinity/board_st7565.h
@@ -83,7 +83,7 @@ static GFXINLINE void init_board(GDisplay *g) {
 }
 
 static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
+    (void) g;
 }
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
@@ -106,8 +106,8 @@ static GFXINLINE void enter_cmd_mode(GDisplay *g) {
 
 
 static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	spiSend(&SPID1, length, data);
+    (void) g;
+    spiSend(&SPID1, length, data);
 }
 
 #endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h
index 25cc8af0fc..c46edeb7b2 100644
--- a/keyboards/ergodox/infinity/config.h
+++ b/keyboards/ergodox/infinity/config.h
@@ -51,16 +51,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define SERIAL_LINK_BAUD 562500
 #define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
-// The visualizer needs gfx thread priorities
-#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
 
 #define VISUALIZER_USER_DATA_SIZE 16
 
-#define LCD_DISPLAY_NUMBER 0
-#define LED_DISPLAY_NUMBER 1
-
-#define LED_NUM_ROWS 7
-#define LED_NUM_COLS 7
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk
deleted file mode 100644
index f32d0d8685..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/IS31FL3731C
-GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
deleted file mode 100644
index b4a5c84b0a..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_ERGODOX
-#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_IS31FL3731C.h"
-
-
-// Can't include led_tables from here
-extern const uint8_t CIE1931_CURVE[];
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-	#define GDISP_SCREEN_HEIGHT		9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-	#define GDISP_SCREEN_WIDTH		16
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-	#define GDISP_INITIAL_CONTRAST	0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-	#define GDISP_INITIAL_BACKLIGHT	0
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG  0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
-
-#define IS31_FRAME_SIZE 0xB4
-
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
-
-#define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
-
-#define IS31
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    uint8_t write_buffer_offset;
-    uint8_t write_buffer[IS31_FRAME_SIZE];
-    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
-    uint8_t page;
-}__attribute__((__packed__)) PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = IS31_COMMANDREGISTER;
-    tx[1] = page;
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = reg;
-    tx[1] = data;
-    write_page(g, page);
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
-    PRIV(g)->write_buffer_offset = offset;
-    write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
-}
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-	// The private area is the display surface.
-	g->priv = gfxAlloc(sizeof(PrivData));
-    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
-	PRIV(g)->page = 0;
-
-	// Initialise the board interface
-	init_board(g);
-	gfxSleepMilliseconds(10);
-
-    // zero function page, all registers (assuming full_page is all zeroes)
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    set_hardware_shutdown(g, false);
-    gfxSleepMilliseconds(10);
-    // software shutdown
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-    // zero function page, all registers
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    gfxSleepMilliseconds(10);
-
-
-    // zero all LED registers on all 8 pages, and enable the mask
-    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
-        write_ram(g, i, 0, IS31_FRAME_SIZE);
-        gfxSleepMilliseconds(1);
-    }
-
-    // software shutdown disable (i.e. turn stuff on)
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-
-    // Finish Init
-    post_init_board(g);
-
-	/* Initialise the GDISP structure */
-	g->g.Width = GDISP_SCREEN_WIDTH;
-	g->g.Height = GDISP_SCREEN_HEIGHT;
-	g->g.Orientation = GDISP_ROTATE_0;
-	g->g.Powermode = powerOff;
-	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-	g->g.Contrast = GDISP_INITIAL_CONTRAST;
-	return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-		// Don't flush if we don't need it.
-		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-			return;
-
-		PRIV(g)->page++;
-		PRIV(g)->page %= 2;
-		// TODO: some smarter algorithm for this
-		// We should run only one physical page at a time
-		// This way we don't need to send so much data, and
-		// we could use slightly less memory
-		uint8_t* src = PRIV(g)->frame_buffer;
-		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-		        ++src;
-		    }
-		}
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-		g->flags &= ~GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-		g->flags |= GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
-	}
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-	LLDSPEC void gdisp_lld_control(GDisplay *g) {
-		switch(g->p.x) {
-		case GDISP_CONTROL_POWER:
-			if (g->g.Powermode == (powermode_t)g->p.ptr)
-				return;
-			switch((powermode_t)g->p.ptr) {
-			case powerOff:
-			case powerSleep:
-			case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-				break;
-			case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-				break;
-			default:
-				return;
-			}
-			g->g.Powermode = (powermode_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_ORIENTATION:
-			if (g->g.Orientation == (orientation_t)g->p.ptr)
-				return;
-			switch((orientation_t)g->p.ptr) {
-			/* Rotation is handled by the drawing routines */
-			case GDISP_ROTATE_0:
-			case GDISP_ROTATE_180:
-				g->g.Height = GDISP_SCREEN_HEIGHT;
-				g->g.Width = GDISP_SCREEN_WIDTH;
-				break;
-			case GDISP_ROTATE_90:
-			case GDISP_ROTATE_270:
-				g->g.Height = GDISP_SCREEN_WIDTH;
-				g->g.Width = GDISP_SCREEN_HEIGHT;
-				break;
-			default:
-				return;
-			}
-			g->g.Orientation = (orientation_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_BACKLIGHT:
-		    if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-		    unsigned val = (unsigned)g->p.ptr;
-		    g->g.Backlight = val > 100 ? 100 : val;
-            g->flags |= GDISP_FLG_NEEDFLUSH;
-		    return;
-		}
-	}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
deleted file mode 100644
index bb28ad775e..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL		TRUE
-#define GDISP_HARDWARE_PIXELREAD		TRUE
-#define GDISP_HARDWARE_CONTROL			TRUE
-
-#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
deleted file mode 100644
index 889a1a0317..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/st7565ergodox
-GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
deleted file mode 100644
index b04ad02935..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_ERGODOX
-#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_ST7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT		32
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH		128
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST	35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT	100
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#include "drivers/gdisp/st7565ergodox/st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility.               	     */
-/*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER       0,1,2,3
-#endif
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    bool_t buffer2;
-    uint8_t data_pos;
-    uint8_t data[16];
-    uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)							(PRIV(g)->ram)
-
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
-    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
-
-static GFXINLINE void flush_cmd(GDisplay* g) {
-    write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
-    PRIV(g)->data_pos = 0;
-}
-
-#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
-
-// Some common routines and macros
-#define delay(us)			gfxSleepMicroseconds(us)
-#define delay_ms(ms)		gfxSleepMilliseconds(ms)
-
-#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)			(1<<((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-    // The private area is the display surface.
-    g->priv = gfxAlloc(sizeof(PrivData));
-    PRIV(g)->buffer2 = false;
-    PRIV(g)->data_pos = 0;
-
-    // Initialise the board interface
-    init_board(g);
-
-    // Hardware reset
-    setpin_reset(g, TRUE);
-    gfxSleepMilliseconds(20);
-    setpin_reset(g, FALSE);
-    gfxSleepMilliseconds(20);
-    acquire_bus(g);
-    enter_cmd_mode(g);
-
-    write_cmd(g, ST7565_RESET);
-    write_cmd(g, ST7565_LCD_BIAS);
-    write_cmd(g, ST7565_ADC);
-    write_cmd(g, ST7565_COM_SCAN);
-
-    write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
-    write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
-
-    // turn on internal power supply (VC=1, VR=1, VF=1)
-    write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-
-    write_cmd(g, ST7565_INVERT_DISPLAY);
-    write_cmd(g, ST7565_ALLON_NORMAL);
-
-    write_cmd(g, ST7565_START_LINE | 0);
-    write_cmd(g, ST7565_RMW);
-    flush_cmd(g);
-
-    // Finish Init
-    post_init_board(g);
-
-    // Release the bus
-    release_bus(g);
-
-    /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
-    g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
-    return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned	p;
-
-    // Don't flush if we don't need it.
-    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-        return;
-
-    acquire_bus(g);
-    enter_cmd_mode(g);
-    unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
-    for (p = 0; p < 4; p++) {
-        write_cmd(g, ST7565_PAGE | (p + dstOffset));
-        write_cmd(g, ST7565_COLUMN_MSB | 0);
-        write_cmd(g, ST7565_COLUMN_LSB | 0);
-        write_cmd(g, ST7565_RMW);
-        flush_cmd(g);
-        enter_data_mode(g);
-        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
-        enter_cmd_mode(g);
-    }
-    unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
-    write_cmd(g, ST7565_START_LINE | line);
-    flush_cmd(g);
-    PRIV(g)->buffer2 = !PRIV(g)->buffer2;
-    release_bus(g);
-
-    g->flags &= ~GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t		x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
-    }
-    if (gdispColor2Native(g->p.color) != Black)
-        RAM(g)[xyaddr(x, y)] |= xybit(y);
-    else
-        RAM(g)[xyaddr(x, y)] &= ~xybit(y);
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t		x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
-    }
-    return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
-}
-#endif
-
-LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
-    uint8_t* buffer = (uint8_t*)g->p.ptr;
-    int linelength = g->p.cx;
-    for (int i = 0; i < g->p.cy; i++) {
-        unsigned dstx = g->p.x;
-        unsigned dsty = g->p.y + i;
-        unsigned srcx = g->p.x1;
-        unsigned srcy = g->p.y1 + i;
-        unsigned srcbit = srcy * g->p.x2 + srcx;
-        for(int j=0; j < linelength; j++) {
-            uint8_t src = buffer[srcbit / 8];
-            uint8_t bit = 7-(srcbit % 8);
-            uint8_t bitset = (src >> bit) & 1;
-            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
-            if (bitset) {
-                *dst |= xybit(dsty);
-            }
-            else {
-                *dst &= ~xybit(dsty);
-            }
-			dstx++;
-            srcbit++;
-        }
-    }
-    g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-LLDSPEC void gdisp_lld_control(GDisplay *g) {
-    switch(g->p.x) {
-    case GDISP_CONTROL_POWER:
-        if (g->g.Powermode == (powermode_t)g->p.ptr)
-            return;
-        switch((powermode_t)g->p.ptr) {
-        case powerOff:
-        case powerSleep:
-        case powerDeepSleep:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_OFF);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        case powerOn:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_ON);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        default:
-            return;
-        }
-        g->g.Powermode = (powermode_t)g->p.ptr;
-        return;
-
-        case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
-            }
-            g->g.Orientation = (orientation_t)g->p.ptr;
-            return;
-
-            case GDISP_CONTROL_CONTRAST:
-                g->g.Contrast = (unsigned)g->p.ptr & 63;
-                acquire_bus(g);
-                enter_cmd_mode(g);
-                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
-                flush_cmd(g);
-                release_bus(g);
-                return;
-    }
-}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
deleted file mode 100644
index 2b66a877c8..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH            TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
-#define GDISP_HARDWARE_BITFILLS         TRUE
-
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
deleted file mode 100644
index 24924ff050..0000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST             0x81
-#define ST7565_ALLON_NORMAL         0xA4
-#define ST7565_ALLON                0xA5
-#define ST7565_POSITIVE_DISPLAY     0xA6
-#define ST7565_INVERT_DISPLAY       0xA7
-#define ST7565_DISPLAY_OFF          0xAE
-#define ST7565_DISPLAY_ON           0xAF
-
-#define ST7565_LCD_BIAS_7           0xA3
-#define ST7565_LCD_BIAS_9           0xA2
-
-#define ST7565_ADC_NORMAL           0xA0
-#define ST7565_ADC_REVERSE          0xA1
-
-#define ST7565_COM_SCAN_INC         0xC0
-#define ST7565_COM_SCAN_DEC         0xC8
-
-#define ST7565_START_LINE           0x40
-#define ST7565_PAGE                 0xB0
-#define ST7565_COLUMN_MSB           0x10
-#define ST7565_COLUMN_LSB           0x00
-#define ST7565_RMW                  0xE0
-
-#define ST7565_RESISTOR_RATIO       0x20
-#define ST7565_POWER_CONTROL        0x28
-
-#define ST7565_RESET                0xE2
-
-#endif /* _ST7565_H */
diff --git a/keyboards/ergodox/infinity/gfxconf.h b/keyboards/ergodox/infinity/gfxconf.h
index 45b9f58580..ca338399d3 100644
--- a/keyboards/ergodox/infinity/gfxconf.h
+++ b/keyboards/ergodox/infinity/gfxconf.h
@@ -22,310 +22,6 @@
 #ifndef _GFXCONF_H
 #define _GFXCONF_H
 
-
-///////////////////////////////////////////////////////////////////////////
-// GOS - One of these must be defined, preferably in your Makefile       //
-///////////////////////////////////////////////////////////////////////////
-//#define GFX_USE_OS_CHIBIOS                           TRUE
-//#define GFX_USE_OS_FREERTOS                          FALSE
-//    #define GFX_FREERTOS_USE_TRACE                   FALSE
-//#define GFX_USE_OS_WIN32                             FALSE
-//#define GFX_USE_OS_LINUX                             FALSE
-//#define GFX_USE_OS_OSX                               FALSE
-//#define GFX_USE_OS_ECOS                              FALSE
-//#define GFX_USE_OS_RAWRTOS                           FALSE
-//#define GFX_USE_OS_ARDUINO                           FALSE
-//#define GFX_USE_OS_KEIL                              FALSE
-//#define GFX_USE_OS_CMSIS                             FALSE
-//#define GFX_USE_OS_RAW32                             FALSE
-//    #define INTERRUPTS_OFF()                         optional_code
-//    #define INTERRUPTS_ON()                          optional_code
-// These are not defined by default for some reason
-#define GOS_NEED_X_THREADS	FALSE
-#define GOS_NEED_X_HEAP		FALSE
-
-// Options that (should where relevant) apply to all operating systems
-    #define GFX_NO_INLINE                            FALSE
-//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
-//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
-//    #define GFX_OS_HEAP_SIZE                         0
-//    #define GFX_OS_NO_INIT                           FALSE
-//    #define GFX_OS_INIT_NO_WARNING                   FALSE
-//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
-//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
-//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
-
-
-///////////////////////////////////////////////////////////////////////////
-// GDISP                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GDISP                                TRUE
-
-//#define GDISP_NEED_AUTOFLUSH                         FALSE
-//#define GDISP_NEED_TIMERFLUSH                        FALSE
-//#define GDISP_NEED_VALIDATION                        TRUE
-//#define GDISP_NEED_CLIP                              TRUE
-#define GDISP_NEED_CIRCLE                            TRUE
-#define GDISP_NEED_ELLIPSE                           TRUE
-#define GDISP_NEED_ARC                               TRUE
-#define GDISP_NEED_ARCSECTORS                        TRUE
-#define GDISP_NEED_CONVEX_POLYGON                    TRUE
-//#define GDISP_NEED_SCROLL                            FALSE
-#define GDISP_NEED_PIXELREAD                         TRUE
-#define GDISP_NEED_CONTROL                           TRUE
-//#define GDISP_NEED_QUERY                             FALSE
-//#define GDISP_NEED_MULTITHREAD                       FALSE
-//#define GDISP_NEED_STREAMING                         FALSE
-#define GDISP_NEED_TEXT                              TRUE
-//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
-//    #define GDISP_NEED_ANTIALIAS                     FALSE
-//    #define GDISP_NEED_UTF8                          FALSE
-    #define GDISP_NEED_TEXT_KERNING                  TRUE
-//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
-//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
-//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
-    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
-//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
-//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
-    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
-//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
-
-//#define GDISP_NEED_IMAGE                             FALSE
-//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
-//    #define GDISP_NEED_IMAGE_GIF                     FALSE
-//    #define GDISP_NEED_IMAGE_BMP                     FALSE
-//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
-//    #define GDISP_NEED_IMAGE_JPG                     FALSE
-//    #define GDISP_NEED_IMAGE_PNG                     FALSE
-//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
-#ifdef EMULATOR
-#define GDISP_NEED_PIXMAP                            TRUE
-#endif
-//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
-
-//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
-//#define GDISP_LINEBUF_SIZE                           128
-//#define GDISP_STARTUP_COLOR                          Black
-#define GDISP_NEED_STARTUP_LOGO                      FALSE
-
-//#define GDISP_TOTAL_DISPLAYS		                 2
-
-#ifndef EMULATOR
-#define GDISP_DRIVER_LIST                            GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX
-#else
-#define GDISP_DRIVER_LIST                            GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX
-#endif
-
-    #ifdef GDISP_DRIVER_LIST
-        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
-        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
-        #define GDISP_HARDWARE_STREAM_READ           FALSE
-        #define GDISP_HARDWARE_STREAM_POS            FALSE
-        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
-        #define GDISP_HARDWARE_CLEARS                FALSE
-        #define GDISP_HARDWARE_FILLS                 FALSE
-        //#define GDISP_HARDWARE_BITFILLS              FALSE
-        #define GDISP_HARDWARE_SCROLL                FALSE
-        #define GDISP_HARDWARE_PIXELREAD             TRUE
-        #define GDISP_HARDWARE_CONTROL               TRUE
-        #define GDISP_HARDWARE_QUERY                 FALSE
-        #define GDISP_HARDWARE_CLIP                  FALSE
-
-        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
-    #endif
-
-// The custom format is not defined for some reason, so define it as error
-// so we don't get compiler warnings
-#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
-
-#define GDISP_USE_GFXNET                             FALSE
-//    #define GDISP_GFXNET_PORT                        13001
-//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
-//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
-//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GWIN                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GWIN                                 FALSE
-
-//#define GWIN_NEED_WINDOWMANAGER                      FALSE
-//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
-//    #define GWIN_REDRAW_SINGLEOP                     FALSE
-//    #define GWIN_NEED_FLASHING                       FALSE
-//        #define GWIN_FLASHING_PERIOD                 250
-
-//#define GWIN_NEED_CONSOLE                            FALSE
-//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
-//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
-//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
-//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
-//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
-//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
-//#define GWIN_NEED_GRAPH                              FALSE
-//#define GWIN_NEED_GL3D                               FALSE
-
-//#define GWIN_NEED_WIDGET                             FALSE
-//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
-//    #define GWIN_NEED_LABEL                          FALSE
-//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
-//    #define GWIN_NEED_BUTTON                         FALSE
-//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
-//    #define GWIN_NEED_SLIDER                         FALSE
-//        #define GWIN_SLIDER_NOSNAP                   FALSE
-//        #define GWIN_SLIDER_DEAD_BAND                5
-//        #define GWIN_SLIDER_TOGGLE_INC               20
-//    #define GWIN_NEED_CHECKBOX                       FALSE
-//    #define GWIN_NEED_IMAGE                          FALSE
-//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
-//    #define GWIN_NEED_RADIO                          FALSE
-//    #define GWIN_NEED_LIST                           FALSE
-//        #define GWIN_NEED_LIST_IMAGES                FALSE
-//    #define GWIN_NEED_PROGRESSBAR                    FALSE
-//        #define GWIN_PROGRESSBAR_AUTO                FALSE
-//    #define GWIN_NEED_KEYBOARD                       FALSE
-//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
-//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
-//    #define GWIN_NEED_TEXTEDIT                       FALSE
-//    #define GWIN_FLAT_STYLING                        FALSE
-//    #define GWIN_WIDGET_TAGS                         FALSE
-
-//#define GWIN_NEED_CONTAINERS                         FALSE
-//    #define GWIN_NEED_CONTAINER                      FALSE
-//    #define GWIN_NEED_FRAME                          FALSE
-//    #define GWIN_NEED_TABSET                         FALSE
-//        #define GWIN_TABSET_TABHEIGHT                18
-
-
-///////////////////////////////////////////////////////////////////////////
-// GEVENT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GEVENT                               TRUE
-
-//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
-//#define GEVENT_MAXIMUM_SIZE                          32
-//#define GEVENT_MAX_SOURCE_LISTENERS                  32
-
-
-///////////////////////////////////////////////////////////////////////////
-// GTIMER                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GTIMER                               FALSE
-
-//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
-//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
-
-
-///////////////////////////////////////////////////////////////////////////
-// GQUEUE                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GQUEUE                               FALSE
-
-//#define GQUEUE_NEED_ASYNC                            FALSE
-//#define GQUEUE_NEED_GSYNC                            FALSE
-//#define GQUEUE_NEED_FSYNC                            FALSE
-//#define GQUEUE_NEED_BUFFERS                          FALSE
-
-///////////////////////////////////////////////////////////////////////////
-// GINPUT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GINPUT                               FALSE
-
-//#define GINPUT_NEED_MOUSE                            FALSE
-//    #define GINPUT_TOUCH_STARTRAW                    FALSE
-//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
-//    #define GINPUT_MOUSE_POLL_PERIOD                 25
-//    #define GINPUT_MOUSE_CLICK_TIME                  300
-//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
-//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
-//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
-//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
-//#define GINPUT_NEED_KEYBOARD                         FALSE
-//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
-//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
-//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
-//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
-//#define GINPUT_NEED_TOGGLE                           FALSE
-//#define GINPUT_NEED_DIAL                             FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GFILE                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GFILE                                FALSE
-
-//#define GFILE_NEED_PRINTG                            FALSE
-//#define GFILE_NEED_SCANG                             FALSE
-//#define GFILE_NEED_STRINGS                           FALSE
-//#define GFILE_NEED_FILELISTS                         FALSE
-//#define GFILE_NEED_STDIO                             FALSE
-//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
-//#define GFILE_NEED_NOAUTOSYNC                        FALSE
-
-//#define GFILE_NEED_MEMFS                             FALSE
-//#define GFILE_NEED_ROMFS                             FALSE
-//#define GFILE_NEED_RAMFS                             FALSE
-//#define GFILE_NEED_FATFS                             FALSE
-//#define GFILE_NEED_NATIVEFS                          FALSE
-//#define GFILE_NEED_CHBIOSFS                          FALSE
-
-//#define GFILE_ALLOW_FLOATS                           FALSE
-//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
-//#define GFILE_MAX_GFILES                             3
-
-///////////////////////////////////////////////////////////////////////////
-// GADC                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GADC                                 FALSE
-
-//#define GADC_MAX_LOWSPEED_DEVICES                    4
-
-
-///////////////////////////////////////////////////////////////////////////
-// GAUDIO                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GAUDIO                               FALSE
-// There seems to be a bug in the ugfx code, the wrong define is used
-// So define it in order to avoid warnings
-#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
-//    #define GAUDIO_NEED_PLAY                         FALSE
-//    #define GAUDIO_NEED_RECORD                       FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GMISC                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GMISC                                TRUE
-
-//#define GMISC_NEED_ARRAYOPS                          FALSE
-//#define GMISC_NEED_FASTTRIG                          FALSE
-//#define GMISC_NEED_FIXEDTRIG                         FALSE
-//#define GMISC_NEED_INVSQRT                           FALSE
-//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
-//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
-#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
-#define GMISC_NEED_MATRIXFIXED2D                     FALSE
+#include "common_gfxconf.h"
 
 #endif /* _GFXCONF_H */
diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk
index bbb0f6efea..a341bbfce8 100644
--- a/keyboards/ergodox/infinity/rules.mk
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -1,7 +1,6 @@
 # project specific files
 SRC =	matrix.c \
-	led.c \
-	animations.c
+	led.c
 
 ## chip/board settings
 # - the next two should match the directories in
@@ -67,5 +66,10 @@ LCD_BACKLIGHT_ENABLE = yes
 MIDI_ENABLE = no
 RGBLIGHT_ENABLE = no
 
-include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
-include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
\ No newline at end of file
+LCD_DRIVER = st7565
+LCD_WIDTH = 128 
+LCD_HEIGHT = 32
+
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 7 
+LED_HEIGHT = 7
\ No newline at end of file
diff --git a/keyboards/ergodox/infinity/simple_visualizer.h b/keyboards/ergodox/infinity/simple_visualizer.h
index ded8a3222e..73d0e08870 100644
--- a/keyboards/ergodox/infinity/simple_visualizer.h
+++ b/keyboards/ergodox/infinity/simple_visualizer.h
@@ -34,7 +34,7 @@
 #include "lcd_backlight_keyframes.h"
 #include "system/serial_link.h"
 #include "led.h"
-#include "animations.h"
+#include "default_animations.h"
 
 static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
 static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
@@ -58,7 +58,7 @@ static keyframe_animation_t color_animation = {
     // this prevents the color from changing when activating the layer
     // momentarily
     .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)},
-    .frame_functions = {keyframe_no_operation, backlight_keyframe_animate_color},
+    .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color},
 };
 
 void initialize_user_visualizer(visualizer_state_t* state) {
diff --git a/keyboards/ergodox/infinity/visualizer.c b/keyboards/ergodox/infinity/visualizer.c
index 5b6b320074..4b16021abc 100644
--- a/keyboards/ergodox/infinity/visualizer.c
+++ b/keyboards/ergodox/infinity/visualizer.c
@@ -31,7 +31,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "lcd_keyframes.h"
 #include "lcd_backlight_keyframes.h"
 #include "system/serial_link.h"
-#include "animations.h"
+#include "default_animations.h"
 
 static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
 static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
@@ -79,7 +79,7 @@ static keyframe_animation_t one_led_color = {
     .num_frames = 1,
     .loop = false,
     .frame_lengths = {gfxMillisecondsToTicks(0)},
-    .frame_functions = {backlight_keyframe_set_color},
+    .frame_functions = {lcd_backlight_keyframe_set_color},
 };
 
 bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) {
@@ -94,7 +94,7 @@ static keyframe_animation_t two_led_colors = {
     .num_frames = 2,
     .loop = true,
     .frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)},
-    .frame_functions = {backlight_keyframe_set_color, swap_led_target_color},
+    .frame_functions = {lcd_backlight_keyframe_set_color, swap_led_target_color},
 };
 
 // The LCD animation alternates between the layer name display and a
diff --git a/keyboards/handwired/magicforce68/README.md b/keyboards/handwired/magicforce68/README.md
index 2877169ef4..a0de66069d 100644
--- a/keyboards/handwired/magicforce68/README.md
+++ b/keyboards/handwired/magicforce68/README.md
@@ -5,7 +5,7 @@ This firmware is for a Magicforce 68 that's had its PCB removed and is handwired
 
 ## Wiring Layout
 
-![Wiring Layout](http://imgur.com/NmTCv5u)
+![Wiring Layout](http://i.imgur.com/NmTCv5u.png)
 
 ## Pinout
 
diff --git a/keyboards/handwired/promethium/rgbsps.c b/keyboards/handwired/promethium/rgbsps.c
index f30badd356..84fac1ae1f 100644
--- a/keyboards/handwired/promethium/rgbsps.c
+++ b/keyboards/handwired/promethium/rgbsps.c
@@ -1,4 +1,4 @@
-#include "light_ws2812.h"
+#include "ws2812.h"
 #include "rgbsps.h"
 
 struct cRGB led[RGBSPS_NUM];
diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk
index 6fa45b42b6..69903dcebe 100644
--- a/keyboards/handwired/promethium/rules.mk
+++ b/keyboards/handwired/promethium/rules.mk
@@ -72,7 +72,7 @@ BLUETOOTH = AdafruitBLE
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-SRC += $(QUANTUM_DIR)/light_ws2812.c
+SRC += ws2812.c
 SRC += rgbsps.c
-SRC += $(QUANTUM_DIR)/analog.c
+SRC += analog.c
 SRC += matrix.c
diff --git a/keyboards/lets_split/common/glcdfont.c b/keyboards/lets_split/common/glcdfont.c
deleted file mode 100644
index 6f88bd23a7..0000000000
--- a/keyboards/lets_split/common/glcdfont.c
+++ /dev/null
@@ -1,276 +0,0 @@
-// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
-// See gfxfont.h for newer custom bitmap font info.
-
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
-
-// Standard ASCII 5x7 font
-
-static const unsigned char font[] PROGMEM = {
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
-	0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
-	0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
-	0x18, 0x3C, 0x7E, 0x3C, 0x18,
-	0x1C, 0x57, 0x7D, 0x57, 0x1C,
-	0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
-	0x00, 0x18, 0x3C, 0x18, 0x00,
-	0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
-	0x00, 0x18, 0x24, 0x18, 0x00,
-	0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
-	0x30, 0x48, 0x3A, 0x06, 0x0E,
-	0x26, 0x29, 0x79, 0x29, 0x26,
-	0x40, 0x7F, 0x05, 0x05, 0x07,
-	0x40, 0x7F, 0x05, 0x25, 0x3F,
-	0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
-	0x7F, 0x3E, 0x1C, 0x1C, 0x08,
-	0x08, 0x1C, 0x1C, 0x3E, 0x7F,
-	0x14, 0x22, 0x7F, 0x22, 0x14,
-	0x5F, 0x5F, 0x00, 0x5F, 0x5F,
-	0x06, 0x09, 0x7F, 0x01, 0x7F,
-	0x00, 0x66, 0x89, 0x95, 0x6A,
-	0x60, 0x60, 0x60, 0x60, 0x60,
-	0x94, 0xA2, 0xFF, 0xA2, 0x94,
-	0x08, 0x04, 0x7E, 0x04, 0x08,
-	0x10, 0x20, 0x7E, 0x20, 0x10,
-	0x08, 0x08, 0x2A, 0x1C, 0x08,
-	0x08, 0x1C, 0x2A, 0x08, 0x08,
-	0x1E, 0x10, 0x10, 0x10, 0x10,
-	0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
-	0x30, 0x38, 0x3E, 0x38, 0x30,
-	0x06, 0x0E, 0x3E, 0x0E, 0x06,
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x5F, 0x00, 0x00,
-	0x00, 0x07, 0x00, 0x07, 0x00,
-	0x14, 0x7F, 0x14, 0x7F, 0x14,
-	0x24, 0x2A, 0x7F, 0x2A, 0x12,
-	0x23, 0x13, 0x08, 0x64, 0x62,
-	0x36, 0x49, 0x56, 0x20, 0x50,
-	0x00, 0x08, 0x07, 0x03, 0x00,
-	0x00, 0x1C, 0x22, 0x41, 0x00,
-	0x00, 0x41, 0x22, 0x1C, 0x00,
-	0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
-	0x08, 0x08, 0x3E, 0x08, 0x08,
-	0x00, 0x80, 0x70, 0x30, 0x00,
-	0x08, 0x08, 0x08, 0x08, 0x08,
-	0x00, 0x00, 0x60, 0x60, 0x00,
-	0x20, 0x10, 0x08, 0x04, 0x02,
-	0x3E, 0x51, 0x49, 0x45, 0x3E,
-	0x00, 0x42, 0x7F, 0x40, 0x00,
-	0x72, 0x49, 0x49, 0x49, 0x46,
-	0x21, 0x41, 0x49, 0x4D, 0x33,
-	0x18, 0x14, 0x12, 0x7F, 0x10,
-	0x27, 0x45, 0x45, 0x45, 0x39,
-	0x3C, 0x4A, 0x49, 0x49, 0x31,
-	0x41, 0x21, 0x11, 0x09, 0x07,
-	0x36, 0x49, 0x49, 0x49, 0x36,
-	0x46, 0x49, 0x49, 0x29, 0x1E,
-	0x00, 0x00, 0x14, 0x00, 0x00,
-	0x00, 0x40, 0x34, 0x00, 0x00,
-	0x00, 0x08, 0x14, 0x22, 0x41,
-	0x14, 0x14, 0x14, 0x14, 0x14,
-	0x00, 0x41, 0x22, 0x14, 0x08,
-	0x02, 0x01, 0x59, 0x09, 0x06,
-	0x3E, 0x41, 0x5D, 0x59, 0x4E,
-	0x7C, 0x12, 0x11, 0x12, 0x7C,
-	0x7F, 0x49, 0x49, 0x49, 0x36,
-	0x3E, 0x41, 0x41, 0x41, 0x22,
-	0x7F, 0x41, 0x41, 0x41, 0x3E,
-	0x7F, 0x49, 0x49, 0x49, 0x41,
-	0x7F, 0x09, 0x09, 0x09, 0x01,
-	0x3E, 0x41, 0x41, 0x51, 0x73,
-	0x7F, 0x08, 0x08, 0x08, 0x7F,
-	0x00, 0x41, 0x7F, 0x41, 0x00,
-	0x20, 0x40, 0x41, 0x3F, 0x01,
-	0x7F, 0x08, 0x14, 0x22, 0x41,
-	0x7F, 0x40, 0x40, 0x40, 0x40,
-	0x7F, 0x02, 0x1C, 0x02, 0x7F,
-	0x7F, 0x04, 0x08, 0x10, 0x7F,
-	0x3E, 0x41, 0x41, 0x41, 0x3E,
-	0x7F, 0x09, 0x09, 0x09, 0x06,
-	0x3E, 0x41, 0x51, 0x21, 0x5E,
-	0x7F, 0x09, 0x19, 0x29, 0x46,
-	0x26, 0x49, 0x49, 0x49, 0x32,
-	0x03, 0x01, 0x7F, 0x01, 0x03,
-	0x3F, 0x40, 0x40, 0x40, 0x3F,
-	0x1F, 0x20, 0x40, 0x20, 0x1F,
-	0x3F, 0x40, 0x38, 0x40, 0x3F,
-	0x63, 0x14, 0x08, 0x14, 0x63,
-	0x03, 0x04, 0x78, 0x04, 0x03,
-	0x61, 0x59, 0x49, 0x4D, 0x43,
-	0x00, 0x7F, 0x41, 0x41, 0x41,
-	0x02, 0x04, 0x08, 0x10, 0x20,
-	0x00, 0x41, 0x41, 0x41, 0x7F,
-	0x04, 0x02, 0x01, 0x02, 0x04,
-	0x40, 0x40, 0x40, 0x40, 0x40,
-	0x00, 0x03, 0x07, 0x08, 0x00,
-	0x20, 0x54, 0x54, 0x78, 0x40,
-	0x7F, 0x28, 0x44, 0x44, 0x38,
-	0x38, 0x44, 0x44, 0x44, 0x28,
-	0x38, 0x44, 0x44, 0x28, 0x7F,
-	0x38, 0x54, 0x54, 0x54, 0x18,
-	0x00, 0x08, 0x7E, 0x09, 0x02,
-	0x18, 0xA4, 0xA4, 0x9C, 0x78,
-	0x7F, 0x08, 0x04, 0x04, 0x78,
-	0x00, 0x44, 0x7D, 0x40, 0x00,
-	0x20, 0x40, 0x40, 0x3D, 0x00,
-	0x7F, 0x10, 0x28, 0x44, 0x00,
-	0x00, 0x41, 0x7F, 0x40, 0x00,
-	0x7C, 0x04, 0x78, 0x04, 0x78,
-	0x7C, 0x08, 0x04, 0x04, 0x78,
-	0x38, 0x44, 0x44, 0x44, 0x38,
-	0xFC, 0x18, 0x24, 0x24, 0x18,
-	0x18, 0x24, 0x24, 0x18, 0xFC,
-	0x7C, 0x08, 0x04, 0x04, 0x08,
-	0x48, 0x54, 0x54, 0x54, 0x24,
-	0x04, 0x04, 0x3F, 0x44, 0x24,
-	0x3C, 0x40, 0x40, 0x20, 0x7C,
-	0x1C, 0x20, 0x40, 0x20, 0x1C,
-	0x3C, 0x40, 0x30, 0x40, 0x3C,
-	0x44, 0x28, 0x10, 0x28, 0x44,
-	0x4C, 0x90, 0x90, 0x90, 0x7C,
-	0x44, 0x64, 0x54, 0x4C, 0x44,
-	0x00, 0x08, 0x36, 0x41, 0x00,
-	0x00, 0x00, 0x77, 0x00, 0x00,
-	0x00, 0x41, 0x36, 0x08, 0x00,
-	0x02, 0x01, 0x02, 0x04, 0x02,
-	0x3C, 0x26, 0x23, 0x26, 0x3C,
-	0x1E, 0xA1, 0xA1, 0x61, 0x12,
-	0x3A, 0x40, 0x40, 0x20, 0x7A,
-	0x38, 0x54, 0x54, 0x55, 0x59,
-	0x21, 0x55, 0x55, 0x79, 0x41,
-	0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut
-	0x21, 0x55, 0x54, 0x78, 0x40,
-	0x20, 0x54, 0x55, 0x79, 0x40,
-	0x0C, 0x1E, 0x52, 0x72, 0x12,
-	0x39, 0x55, 0x55, 0x55, 0x59,
-	0x39, 0x54, 0x54, 0x54, 0x59,
-	0x39, 0x55, 0x54, 0x54, 0x58,
-	0x00, 0x00, 0x45, 0x7C, 0x41,
-	0x00, 0x02, 0x45, 0x7D, 0x42,
-	0x00, 0x01, 0x45, 0x7C, 0x40,
-	0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut
-	0xF0, 0x28, 0x25, 0x28, 0xF0,
-	0x7C, 0x54, 0x55, 0x45, 0x00,
-	0x20, 0x54, 0x54, 0x7C, 0x54,
-	0x7C, 0x0A, 0x09, 0x7F, 0x49,
-	0x32, 0x49, 0x49, 0x49, 0x32,
-	0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut
-	0x32, 0x4A, 0x48, 0x48, 0x30,
-	0x3A, 0x41, 0x41, 0x21, 0x7A,
-	0x3A, 0x42, 0x40, 0x20, 0x78,
-	0x00, 0x9D, 0xA0, 0xA0, 0x7D,
-	0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut
-	0x3D, 0x40, 0x40, 0x40, 0x3D,
-	0x3C, 0x24, 0xFF, 0x24, 0x24,
-	0x48, 0x7E, 0x49, 0x43, 0x66,
-	0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
-	0xFF, 0x09, 0x29, 0xF6, 0x20,
-	0xC0, 0x88, 0x7E, 0x09, 0x03,
-	0x20, 0x54, 0x54, 0x79, 0x41,
-	0x00, 0x00, 0x44, 0x7D, 0x41,
-	0x30, 0x48, 0x48, 0x4A, 0x32,
-	0x38, 0x40, 0x40, 0x22, 0x7A,
-	0x00, 0x7A, 0x0A, 0x0A, 0x72,
-	0x7D, 0x0D, 0x19, 0x31, 0x7D,
-	0x26, 0x29, 0x29, 0x2F, 0x28,
-	0x26, 0x29, 0x29, 0x29, 0x26,
-	0x30, 0x48, 0x4D, 0x40, 0x20,
-	0x38, 0x08, 0x08, 0x08, 0x08,
-	0x08, 0x08, 0x08, 0x08, 0x38,
-	0x2F, 0x10, 0xC8, 0xAC, 0xBA,
-	0x2F, 0x10, 0x28, 0x34, 0xFA,
-	0x00, 0x00, 0x7B, 0x00, 0x00,
-	0x08, 0x14, 0x2A, 0x14, 0x22,
-	0x22, 0x14, 0x2A, 0x14, 0x08,
-	0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code
-	0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block
-	0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block
-	0x00, 0x00, 0x00, 0xFF, 0x00,
-	0x10, 0x10, 0x10, 0xFF, 0x00,
-	0x14, 0x14, 0x14, 0xFF, 0x00,
-	0x10, 0x10, 0xFF, 0x00, 0xFF,
-	0x10, 0x10, 0xF0, 0x10, 0xF0,
-	0x14, 0x14, 0x14, 0xFC, 0x00,
-	0x14, 0x14, 0xF7, 0x00, 0xFF,
-	0x00, 0x00, 0xFF, 0x00, 0xFF,
-	0x14, 0x14, 0xF4, 0x04, 0xFC,
-	0x14, 0x14, 0x17, 0x10, 0x1F,
-	0x10, 0x10, 0x1F, 0x10, 0x1F,
-	0x14, 0x14, 0x14, 0x1F, 0x00,
-	0x10, 0x10, 0x10, 0xF0, 0x00,
-	0x00, 0x00, 0x00, 0x1F, 0x10,
-	0x10, 0x10, 0x10, 0x1F, 0x10,
-	0x10, 0x10, 0x10, 0xF0, 0x10,
-	0x00, 0x00, 0x00, 0xFF, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0xFF, 0x10,
-	0x00, 0x00, 0x00, 0xFF, 0x14,
-	0x00, 0x00, 0xFF, 0x00, 0xFF,
-	0x00, 0x00, 0x1F, 0x10, 0x17,
-	0x00, 0x00, 0xFC, 0x04, 0xF4,
-	0x14, 0x14, 0x17, 0x10, 0x17,
-	0x14, 0x14, 0xF4, 0x04, 0xF4,
-	0x00, 0x00, 0xFF, 0x00, 0xF7,
-	0x14, 0x14, 0x14, 0x14, 0x14,
-	0x14, 0x14, 0xF7, 0x00, 0xF7,
-	0x14, 0x14, 0x14, 0x17, 0x14,
-	0x10, 0x10, 0x1F, 0x10, 0x1F,
-	0x14, 0x14, 0x14, 0xF4, 0x14,
-	0x10, 0x10, 0xF0, 0x10, 0xF0,
-	0x00, 0x00, 0x1F, 0x10, 0x1F,
-	0x00, 0x00, 0x00, 0x1F, 0x14,
-	0x00, 0x00, 0x00, 0xFC, 0x14,
-	0x00, 0x00, 0xF0, 0x10, 0xF0,
-	0x10, 0x10, 0xFF, 0x10, 0xFF,
-	0x14, 0x14, 0x14, 0xFF, 0x14,
-	0x10, 0x10, 0x10, 0x1F, 0x00,
-	0x00, 0x00, 0x00, 0xF0, 0x10,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
-	0xFF, 0xFF, 0xFF, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0xFF, 0xFF,
-	0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
-	0x38, 0x44, 0x44, 0x38, 0x44,
-	0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta
-	0x7E, 0x02, 0x02, 0x06, 0x06,
-	0x02, 0x7E, 0x02, 0x7E, 0x02,
-	0x63, 0x55, 0x49, 0x41, 0x63,
-	0x38, 0x44, 0x44, 0x3C, 0x04,
-	0x40, 0x7E, 0x20, 0x1E, 0x20,
-	0x06, 0x02, 0x7E, 0x02, 0x02,
-	0x99, 0xA5, 0xE7, 0xA5, 0x99,
-	0x1C, 0x2A, 0x49, 0x2A, 0x1C,
-	0x4C, 0x72, 0x01, 0x72, 0x4C,
-	0x30, 0x4A, 0x4D, 0x4D, 0x30,
-	0x30, 0x48, 0x78, 0x48, 0x30,
-	0xBC, 0x62, 0x5A, 0x46, 0x3D,
-	0x3E, 0x49, 0x49, 0x49, 0x00,
-	0x7E, 0x01, 0x01, 0x01, 0x7E,
-	0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
-	0x44, 0x44, 0x5F, 0x44, 0x44,
-	0x40, 0x51, 0x4A, 0x44, 0x40,
-	0x40, 0x44, 0x4A, 0x51, 0x40,
-	0x00, 0x00, 0xFF, 0x01, 0x03,
-	0xE0, 0x80, 0xFF, 0x00, 0x00,
-	0x08, 0x08, 0x6B, 0x6B, 0x08,
-	0x36, 0x12, 0x36, 0x24, 0x36,
-	0x06, 0x0F, 0x09, 0x0F, 0x06,
-	0x00, 0x00, 0x18, 0x18, 0x00,
-	0x00, 0x00, 0x10, 0x10, 0x00,
-	0x30, 0x40, 0xFF, 0x01, 0x01,
-	0x00, 0x1F, 0x01, 0x01, 0x1E,
-	0x00, 0x19, 0x1D, 0x17, 0x12,
-	0x00, 0x3C, 0x3C, 0x3C, 0x3C,
-	0x00, 0x00, 0x00, 0x00, 0x00  // #255 NBSP
-};
-#endif // FONT5X7_H
diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h
deleted file mode 100644
index f9e7ed75d9..0000000000
--- a/keyboards/lets_split/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */
diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c
deleted file mode 100644
index 5c6dff27f8..0000000000
--- a/keyboards/lets_split/ssd1306.c
+++ /dev/null
@@ -1,470 +0,0 @@
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "config.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#include "lets_split.h"
-#include "common/glcdfont.c"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "pincontrol.h"
-
-//assign the right code to your layers
-#define _BASE 0
-#define _LOWER 8
-#define _RAISE 16
-#define _FNLAYER 64
-#define _NUMLAY 128
-#define _NLOWER 136
-#define _NFNLAYER 192
-#define _MOUSECURSOR 256
-#define _ADJUST 65560
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble.  Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#define i2cAddress 0x3C
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
-};
-
-static struct CharacterMatrix display;
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
-  bool res = false;
-
-  if (i2c_start_write(i2cAddress)) {
-    xprintf("failed to start write to %d\n", i2cAddress);
-    goto done;
-  }
-
-  if (i2c_master_write(0x0 /* command byte follows */)) {
-    print("failed to write control byte\n");
-
-    goto done;
-  }
-
-  if (i2c_master_write(cmd)) {
-    xprintf("failed to write command %d\n", cmd);
-    goto done;
-  }
-  res = true;
-done:
-  i2c_master_stop();
-  return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  if (!_send_cmd1(opr1)) {
-    return false;
-  }
-  return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void matrix_clear(struct CharacterMatrix *matrix);
-
-static void clear_display(void) {
-  matrix_clear(&display);
-
-  // Clear all of the display bits (there can be random noise
-  // in the RAM on startup)
-  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
-  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
-  if (i2c_start_write(i2cAddress)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < DisplayWidth; ++col) {
-      i2c_master_write(0);
-    }
-  }
-
-  display.dirty = false;
-
-done:
-  i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
-  sendchar(c);
-  iota_gfx_write_char(c);
-
-  if (!displaying) {
-    iota_gfx_flush();
-  }
-  return 0;
-}
-#endif
-
-bool iota_gfx_init(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  send_cmd2(SetDisplayClockDiv, 0x80);
-  send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
-  send_cmd2(SetDisplayOffset, 0);
-
-
-  send_cmd1(SetStartLine | 0x0);
-  send_cmd2(SetChargePump, 0x14 /* Enable */);
-  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
-/// Flips the display orientation 0 degrees
-  send_cmd1(SegRemap | 0x1);
-  send_cmd1(ComScanDec);
-/*
-// the following Flip the display orientation 180 degrees
-  send_cmd1(SegRemap);
-  send_cmd1(ComScanInc);
-// end flip */
-  send_cmd2(SetComPins, 0x2);
-  send_cmd2(SetContrast, 0x8f);
-  send_cmd2(SetPreCharge, 0xf1);
-  send_cmd2(SetVComDetect, 0x40);
-  send_cmd1(DisplayAllOnResume);
-  send_cmd1(NormalDisplay);
-  send_cmd1(DeActivateScroll);
-  send_cmd1(DisplayOn);
-
-  send_cmd2(SetContrast, 0); // Dim
-
-  clear_display();
-
-  success = true;
-
-  iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
-  print_set_sendchar(capture_sendchar);
-#endif
-
-done:
-  return success;
-}
-
-bool iota_gfx_off(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  success = true;
-
-done:
-  return success;
-} 
-
-bool iota_gfx_on(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOn);
-  success = true;
-
-done:
-  return success;
-}
-
-static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
-  *matrix->cursor = c;
-  ++matrix->cursor;
-
-  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
-    // We went off the end; scroll the display upwards by one line
-    memmove(&matrix->display[0], &matrix->display[1],
-            MatrixCols * (MatrixRows - 1));
-    matrix->cursor = &matrix->display[MatrixRows - 1][0];
-    memset(matrix->cursor, ' ', MatrixCols);
-  }
-}
-
-static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
-  matrix->dirty = true;
-
-  if (c == '\n') {
-    // Clear to end of line from the cursor and then move to the
-    // start of the next line
-    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
-    while (cursor_col++ < MatrixCols) {
-      matrix_write_char_inner(matrix, ' ');
-    }
-    return;
-  }
-
-  matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
-  matrix_write_char(&display, c);
-}
-
-static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    matrix_write_char(matrix, *data);
-    ++data;
-  }
-}
-
-void iota_gfx_write(const char *data) {
-  matrix_write(&display, data);
-}
-
-static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
-  while (true) {
-    uint8_t c = pgm_read_byte(data);
-    if (c == 0) {
-      return;
-    }
-    matrix_write_char(matrix, c);
-    ++data;
-  }
-}
-
-void iota_gfx_write_P(const char *data) {
-  matrix_write_P(&display, data);
-}
-
-static void matrix_clear(struct CharacterMatrix *matrix) {
-  memset(matrix->display, ' ', sizeof(matrix->display));
-  matrix->cursor = &matrix->display[0][0];
-  matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
-  matrix_clear(&display);
-}
-
-static void matrix_render(struct CharacterMatrix *matrix) {
-  last_flush = timer_read();
-  iota_gfx_on();
-#if DEBUG_TO_SCREEN
-  ++displaying;
-#endif
-
-  // Move to the home position
-  send_cmd3(PageAddr, 0, MatrixRows - 1);
-  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
-  if (i2c_start_write(i2cAddress)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < MatrixCols; ++col) {
-      const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
-
-      for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
-        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
-        i2c_master_write(colBits);
-      }
-
-      // 1 column of space between chars (it's not included in the glyph)
-      i2c_master_write(0);
-    }
-  }
-
-  matrix->dirty = false;
-
-done:
-  i2c_master_stop();
-#if DEBUG_TO_SCREEN
-  --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
-  matrix_render(&display);
-}
-
-static void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static void render_status_info(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case _BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case _RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case _LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case _ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-  
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
-}
-
-void iota_gfx_task(void) {
-  render_status_info();
-
-  if (display.dirty) {
-    iota_gfx_flush();
-  }
-
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-    iota_gfx_off();
-  }
-}
-#endif
diff --git a/keyboards/lets_split/ssd1306.h b/keyboards/lets_split/ssd1306.h
deleted file mode 100644
index b0c74f987e..0000000000
--- a/keyboards/lets_split/ssd1306.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef SSD1306_H
-#define SSD1306_H
-
-#include <stdbool.h>
-#include <stdio.h>
-
-bool iota_gfx_init(void);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-#endif
diff --git a/keyboards/nyquist/pro_micro.h b/keyboards/nyquist/pro_micro.h
deleted file mode 100644
index f9e7ed75d9..0000000000
--- a/keyboards/nyquist/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */
diff --git a/keyboards/orthodox/pro_micro.h b/keyboards/orthodox/pro_micro.h
deleted file mode 100644
index f9e7ed75d9..0000000000
--- a/keyboards/orthodox/pro_micro.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS  30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
-
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */
diff --git a/keyboards/orthodox/ssd1306.c b/keyboards/orthodox/ssd1306.c
deleted file mode 100644
index 5c6dff27f8..0000000000
--- a/keyboards/orthodox/ssd1306.c
+++ /dev/null
@@ -1,470 +0,0 @@
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "config.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#include "lets_split.h"
-#include "common/glcdfont.c"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "pincontrol.h"
-
-//assign the right code to your layers
-#define _BASE 0
-#define _LOWER 8
-#define _RAISE 16
-#define _FNLAYER 64
-#define _NUMLAY 128
-#define _NLOWER 136
-#define _NFNLAYER 192
-#define _MOUSECURSOR 256
-#define _ADJUST 65560
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble.  Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#define i2cAddress 0x3C
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
-};
-
-static struct CharacterMatrix display;
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
-  bool res = false;
-
-  if (i2c_start_write(i2cAddress)) {
-    xprintf("failed to start write to %d\n", i2cAddress);
-    goto done;
-  }
-
-  if (i2c_master_write(0x0 /* command byte follows */)) {
-    print("failed to write control byte\n");
-
-    goto done;
-  }
-
-  if (i2c_master_write(cmd)) {
-    xprintf("failed to write command %d\n", cmd);
-    goto done;
-  }
-  res = true;
-done:
-  i2c_master_stop();
-  return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  if (!_send_cmd1(opr1)) {
-    return false;
-  }
-  return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void matrix_clear(struct CharacterMatrix *matrix);
-
-static void clear_display(void) {
-  matrix_clear(&display);
-
-  // Clear all of the display bits (there can be random noise
-  // in the RAM on startup)
-  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
-  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
-  if (i2c_start_write(i2cAddress)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < DisplayWidth; ++col) {
-      i2c_master_write(0);
-    }
-  }
-
-  display.dirty = false;
-
-done:
-  i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
-  sendchar(c);
-  iota_gfx_write_char(c);
-
-  if (!displaying) {
-    iota_gfx_flush();
-  }
-  return 0;
-}
-#endif
-
-bool iota_gfx_init(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  send_cmd2(SetDisplayClockDiv, 0x80);
-  send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
-  send_cmd2(SetDisplayOffset, 0);
-
-
-  send_cmd1(SetStartLine | 0x0);
-  send_cmd2(SetChargePump, 0x14 /* Enable */);
-  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
-/// Flips the display orientation 0 degrees
-  send_cmd1(SegRemap | 0x1);
-  send_cmd1(ComScanDec);
-/*
-// the following Flip the display orientation 180 degrees
-  send_cmd1(SegRemap);
-  send_cmd1(ComScanInc);
-// end flip */
-  send_cmd2(SetComPins, 0x2);
-  send_cmd2(SetContrast, 0x8f);
-  send_cmd2(SetPreCharge, 0xf1);
-  send_cmd2(SetVComDetect, 0x40);
-  send_cmd1(DisplayAllOnResume);
-  send_cmd1(NormalDisplay);
-  send_cmd1(DeActivateScroll);
-  send_cmd1(DisplayOn);
-
-  send_cmd2(SetContrast, 0); // Dim
-
-  clear_display();
-
-  success = true;
-
-  iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
-  print_set_sendchar(capture_sendchar);
-#endif
-
-done:
-  return success;
-}
-
-bool iota_gfx_off(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOff);
-  success = true;
-
-done:
-  return success;
-} 
-
-bool iota_gfx_on(void) {
-  bool success = false;
-
-  send_cmd1(DisplayOn);
-  success = true;
-
-done:
-  return success;
-}
-
-static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
-  *matrix->cursor = c;
-  ++matrix->cursor;
-
-  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
-    // We went off the end; scroll the display upwards by one line
-    memmove(&matrix->display[0], &matrix->display[1],
-            MatrixCols * (MatrixRows - 1));
-    matrix->cursor = &matrix->display[MatrixRows - 1][0];
-    memset(matrix->cursor, ' ', MatrixCols);
-  }
-}
-
-static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
-  matrix->dirty = true;
-
-  if (c == '\n') {
-    // Clear to end of line from the cursor and then move to the
-    // start of the next line
-    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
-    while (cursor_col++ < MatrixCols) {
-      matrix_write_char_inner(matrix, ' ');
-    }
-    return;
-  }
-
-  matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
-  matrix_write_char(&display, c);
-}
-
-static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    matrix_write_char(matrix, *data);
-    ++data;
-  }
-}
-
-void iota_gfx_write(const char *data) {
-  matrix_write(&display, data);
-}
-
-static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
-  while (true) {
-    uint8_t c = pgm_read_byte(data);
-    if (c == 0) {
-      return;
-    }
-    matrix_write_char(matrix, c);
-    ++data;
-  }
-}
-
-void iota_gfx_write_P(const char *data) {
-  matrix_write_P(&display, data);
-}
-
-static void matrix_clear(struct CharacterMatrix *matrix) {
-  memset(matrix->display, ' ', sizeof(matrix->display));
-  matrix->cursor = &matrix->display[0][0];
-  matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
-  matrix_clear(&display);
-}
-
-static void matrix_render(struct CharacterMatrix *matrix) {
-  last_flush = timer_read();
-  iota_gfx_on();
-#if DEBUG_TO_SCREEN
-  ++displaying;
-#endif
-
-  // Move to the home position
-  send_cmd3(PageAddr, 0, MatrixRows - 1);
-  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
-  if (i2c_start_write(i2cAddress)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < MatrixCols; ++col) {
-      const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
-
-      for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
-        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
-        i2c_master_write(colBits);
-      }
-
-      // 1 column of space between chars (it's not included in the glyph)
-      i2c_master_write(0);
-    }
-  }
-
-  matrix->dirty = false;
-
-done:
-  i2c_master_stop();
-#if DEBUG_TO_SCREEN
-  --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
-  matrix_render(&display);
-}
-
-static void matrix_update(struct CharacterMatrix *dest,
-                          const struct CharacterMatrix *source) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static void render_status_info(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case _BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case _RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case _LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case _ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-  
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
-}
-
-void iota_gfx_task(void) {
-  render_status_info();
-
-  if (display.dirty) {
-    iota_gfx_flush();
-  }
-
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-    iota_gfx_off();
-  }
-}
-#endif
diff --git a/keyboards/orthodox/ssd1306.h b/keyboards/orthodox/ssd1306.h
deleted file mode 100644
index b0c74f987e..0000000000
--- a/keyboards/orthodox/ssd1306.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef SSD1306_H
-#define SSD1306_H
-
-#include <stdbool.h>
-#include <stdio.h>
-
-bool iota_gfx_init(void);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-#endif
diff --git a/keyboards/whitefox/animations.c b/keyboards/whitefox/animations.c
deleted file mode 100644
index ed1d75efb8..0000000000
--- a/keyboards/whitefox/animations.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if defined(VISUALIZER_ENABLE)
-
-#include "animations.h"
-#include "visualizer.h"
-
-#ifdef BACKLIGHT_ENABLE
-#include "led_keyframes.h"
-#endif
-
-#include "visualizer_keyframes.h"
-
-
-#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
-
-static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef BACKLIGHT_ENABLE
-    led_keyframe_enable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef BACKLIGHT_ENABLE
-    led_keyframe_disable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_in_all(animation, state);
-#endif
-    return ret;
-}
-
-static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_out_all(animation, state);
-#endif
-    return ret;
-}
-
-
-// Don't worry, if the startup animation is long, you can use the keyboard like normal
-// during that time
-keyframe_animation_t default_startup_animation = {
-    .num_frames = 2,
-    .loop = false,
-    .frame_lengths = {0, gfxMillisecondsToTicks(5000)},
-    .frame_functions = {
-            keyframe_enable,
-            keyframe_fade_in,
-    },
-};
-
-keyframe_animation_t default_suspend_animation = {
-    .num_frames = 2,
-    .loop = false,
-    .frame_lengths = {gfxMillisecondsToTicks(1000), 0},
-    .frame_functions = {
-            keyframe_fade_out,
-            keyframe_disable,
-    },
-};
-#endif
-
-#if defined(BACKLIGHT_ENABLE)
-#define CROSSFADE_TIME 1000
-#define GRADIENT_TIME 3000
-
-keyframe_animation_t led_test_animation = {
-    .num_frames = 14,
-    .loop = true,
-    .frame_lengths = {
-        gfxMillisecondsToTicks(1000), // fade in
-        gfxMillisecondsToTicks(1000), // no op (leds on)
-        gfxMillisecondsToTicks(1000), // fade out
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // mirror leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // normal leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-
-    },
-    .frame_functions = {
-        led_keyframe_fade_in_all,
-        keyframe_no_operation,
-        led_keyframe_fade_out_all,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_mirror_orientation,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_normal_orientation,
-        led_keyframe_crossfade,
-    },
-};
-#endif
-
-#endif
diff --git a/keyboards/whitefox/animations.h b/keyboards/whitefox/animations.h
deleted file mode 100644
index 6d8b9830d9..0000000000
--- a/keyboards/whitefox/animations.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-
-#include "visualizer.h"
-
-// You can use these default animations, but of course you can also write your own custom ones instead
-extern keyframe_animation_t default_startup_animation;
-extern keyframe_animation_t default_suspend_animation;
-
-// An animation for testing and demonstrating the led support, should probably not be used for real world
-// cases
-extern keyframe_animation_t led_test_animation;
-
-#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */
diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/whitefox/board_is31fl3731c.h
index 3dc5327a58..dea643f107 100644
--- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h
+++ b/keyboards/whitefox/board_is31fl3731c.h
@@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = {
   400000 // clock speed (Hz); 400kHz max for IS31
 };
 
-#define GDISP_SCREEN_WIDTH  16
-#define GDISP_SCREEN_HEIGHT 5
-
 static const uint8_t led_mask[] = {
 	0xFF, 0x00, /* C1-1 -> C1-16 */
 	0xFF, 0x00, /* C2-1 -> C2-16 */
diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h
index 08de9b9aa8..dc33a7ce5b 100644
--- a/keyboards/whitefox/config.h
+++ b/keyboards/whitefox/config.h
@@ -81,12 +81,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#endif
-
-// The visualizer needs gfx thread priorities
-#define LED_DISPLAY_NUMBER 0
-
-#define LED_NUM_ROWS 5
-#define LED_NUM_COLS 16
-
-#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
+#endif
\ No newline at end of file
diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk
deleted file mode 100644
index f32d0d8685..0000000000
--- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/IS31FL3731C
-GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
deleted file mode 100644
index c807cbd1e2..0000000000
--- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_WHITEFOX
-#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_IS31FL3731C.h"
-
-
-// Can't include led_tables from here
-extern const uint8_t CIE1931_CURVE[];
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-	#define GDISP_SCREEN_HEIGHT		9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-	#define GDISP_SCREEN_WIDTH		16
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-	#define GDISP_INITIAL_CONTRAST	0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-	#define GDISP_INITIAL_BACKLIGHT	0
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG  0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
-
-#define IS31_FRAME_SIZE 0xB4
-
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
-
-#define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
-
-#define IS31
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    uint8_t write_buffer_offset;
-    uint8_t write_buffer[IS31_FRAME_SIZE];
-    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
-    uint8_t page;
-}__attribute__((__packed__)) PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = IS31_COMMANDREGISTER;
-    tx[1] = page;
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = reg;
-    tx[1] = data;
-    write_page(g, page);
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
-    PRIV(g)->write_buffer_offset = offset;
-    write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
-}
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-	// The private area is the display surface.
-	g->priv = gfxAlloc(sizeof(PrivData));
-    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
-	PRIV(g)->page = 0;
-
-	// Initialise the board interface
-	init_board(g);
-	gfxSleepMilliseconds(10);
-
-    // zero function page, all registers (assuming full_page is all zeroes)
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    set_hardware_shutdown(g, false);
-    gfxSleepMilliseconds(10);
-    // software shutdown
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-    // zero function page, all registers
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    gfxSleepMilliseconds(10);
-
-
-    // zero all LED registers on all 8 pages, and enable the mask
-    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
-        write_ram(g, i, 0, IS31_FRAME_SIZE);
-        gfxSleepMilliseconds(1);
-    }
-
-    // software shutdown disable (i.e. turn stuff on)
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-
-    // Finish Init
-    post_init_board(g);
-
-	/* Initialise the GDISP structure */
-	g->g.Width = GDISP_SCREEN_WIDTH;
-	g->g.Height = GDISP_SCREEN_HEIGHT;
-	g->g.Orientation = GDISP_ROTATE_0;
-	g->g.Powermode = powerOff;
-	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-	g->g.Contrast = GDISP_INITIAL_CONTRAST;
-	return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-		// Don't flush if we don't need it.
-		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-			return;
-
-		PRIV(g)->page++;
-		PRIV(g)->page %= 2;
-		// TODO: some smarter algorithm for this
-		// We should run only one physical page at a time
-		// This way we don't need to send so much data, and
-		// we could use slightly less memory
-		uint8_t* src = PRIV(g)->frame_buffer;
-		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-		        ++src;
-		    }
-		}
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-		g->flags &= ~GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-		g->flags |= GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
-	}
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-	LLDSPEC void gdisp_lld_control(GDisplay *g) {
-		switch(g->p.x) {
-		case GDISP_CONTROL_POWER:
-			if (g->g.Powermode == (powermode_t)g->p.ptr)
-				return;
-			switch((powermode_t)g->p.ptr) {
-			case powerOff:
-			case powerSleep:
-			case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-				break;
-			case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-				break;
-			default:
-				return;
-			}
-			g->g.Powermode = (powermode_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_ORIENTATION:
-			if (g->g.Orientation == (orientation_t)g->p.ptr)
-				return;
-			switch((orientation_t)g->p.ptr) {
-			/* Rotation is handled by the drawing routines */
-			case GDISP_ROTATE_0:
-			case GDISP_ROTATE_180:
-				g->g.Height = GDISP_SCREEN_HEIGHT;
-				g->g.Width = GDISP_SCREEN_WIDTH;
-				break;
-			case GDISP_ROTATE_90:
-			case GDISP_ROTATE_270:
-				g->g.Height = GDISP_SCREEN_WIDTH;
-				g->g.Width = GDISP_SCREEN_HEIGHT;
-				break;
-			default:
-				return;
-			}
-			g->g.Orientation = (orientation_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_BACKLIGHT:
-		    if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-		    unsigned val = (unsigned)g->p.ptr;
-		    g->g.Backlight = val > 100 ? 100 : val;
-            g->flags |= GDISP_FLG_NEEDFLUSH;
-		    return;
-		}
-	}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
deleted file mode 100644
index bb28ad775e..0000000000
--- a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL		TRUE
-#define GDISP_HARDWARE_PIXELREAD		TRUE
-#define GDISP_HARDWARE_CONTROL			TRUE
-
-#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h
index 890317a0f4..ca338399d3 100644
--- a/keyboards/whitefox/gfxconf.h
+++ b/keyboards/whitefox/gfxconf.h
@@ -22,308 +22,6 @@
 #ifndef _GFXCONF_H
 #define _GFXCONF_H
 
-
-///////////////////////////////////////////////////////////////////////////
-// GOS - One of these must be defined, preferably in your Makefile       //
-///////////////////////////////////////////////////////////////////////////
-//#define GFX_USE_OS_CHIBIOS                           TRUE
-//#define GFX_USE_OS_FREERTOS                          FALSE
-//    #define GFX_FREERTOS_USE_TRACE                   FALSE
-//#define GFX_USE_OS_WIN32                             FALSE
-//#define GFX_USE_OS_LINUX                             FALSE
-//#define GFX_USE_OS_OSX                               FALSE
-//#define GFX_USE_OS_ECOS                              FALSE
-//#define GFX_USE_OS_RAWRTOS                           FALSE
-//#define GFX_USE_OS_ARDUINO                           FALSE
-//#define GFX_USE_OS_KEIL                              FALSE
-//#define GFX_USE_OS_CMSIS                             FALSE
-//#define GFX_USE_OS_RAW32                             FALSE
-//    #define INTERRUPTS_OFF()                         optional_code
-//    #define INTERRUPTS_ON()                          optional_code
-// These are not defined by default for some reason
-#define GOS_NEED_X_THREADS	FALSE
-#define GOS_NEED_X_HEAP		FALSE
-
-// Options that (should where relevant) apply to all operating systems
-    #define GFX_NO_INLINE                            FALSE
-//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
-//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
-//    #define GFX_OS_HEAP_SIZE                         0
-//    #define GFX_OS_NO_INIT                           FALSE
-//    #define GFX_OS_INIT_NO_WARNING                   FALSE
-//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
-//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
-//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
-
-
-///////////////////////////////////////////////////////////////////////////
-// GDISP                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GDISP                                TRUE
-
-//#define GDISP_NEED_AUTOFLUSH                         FALSE
-//#define GDISP_NEED_TIMERFLUSH                        FALSE
-//#define GDISP_NEED_VALIDATION                        TRUE
-//#define GDISP_NEED_CLIP                              TRUE
-#define GDISP_NEED_CIRCLE                            TRUE
-#define GDISP_NEED_ELLIPSE                           TRUE
-#define GDISP_NEED_ARC                               TRUE
-#define GDISP_NEED_ARCSECTORS                        TRUE
-#define GDISP_NEED_CONVEX_POLYGON                    TRUE
-//#define GDISP_NEED_SCROLL                            FALSE
-#define GDISP_NEED_PIXELREAD                         TRUE
-#define GDISP_NEED_CONTROL                           TRUE
-//#define GDISP_NEED_QUERY                             FALSE
-//#define GDISP_NEED_MULTITHREAD                       FALSE
-//#define GDISP_NEED_STREAMING                         FALSE
-#define GDISP_NEED_TEXT                              TRUE
-//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
-//    #define GDISP_NEED_ANTIALIAS                     FALSE
-//    #define GDISP_NEED_UTF8                          FALSE
-    #define GDISP_NEED_TEXT_KERNING                  TRUE
-//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
-//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
-//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
-    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
-//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
-//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
-    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
-//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
-
-//#define GDISP_NEED_IMAGE                             FALSE
-//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
-//    #define GDISP_NEED_IMAGE_GIF                     FALSE
-//    #define GDISP_NEED_IMAGE_BMP                     FALSE
-//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
-//    #define GDISP_NEED_IMAGE_JPG                     FALSE
-//    #define GDISP_NEED_IMAGE_PNG                     FALSE
-//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
-#ifdef EMULATOR
-#define GDISP_NEED_PIXMAP                            TRUE
-#endif
-//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
-
-//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
-//#define GDISP_LINEBUF_SIZE                           128
-//#define GDISP_STARTUP_COLOR                          Black
-#define GDISP_NEED_STARTUP_LOGO                      FALSE
-
-//#define GDISP_TOTAL_DISPLAYS		                 2
-
-#ifndef EMULATOR
-#define GDISP_DRIVER_LIST                            GDISPVMT_IS31FL3731C_WHITEFOX
-#endif
-
-    #ifdef GDISP_DRIVER_LIST
-        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
-        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
-        #define GDISP_HARDWARE_STREAM_READ           FALSE
-        #define GDISP_HARDWARE_STREAM_POS            FALSE
-        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
-        #define GDISP_HARDWARE_CLEARS                FALSE
-        #define GDISP_HARDWARE_FILLS                 FALSE
-        //#define GDISP_HARDWARE_BITFILLS              FALSE
-        #define GDISP_HARDWARE_SCROLL                FALSE
-        #define GDISP_HARDWARE_PIXELREAD             TRUE
-        #define GDISP_HARDWARE_CONTROL               TRUE
-        #define GDISP_HARDWARE_QUERY                 FALSE
-        #define GDISP_HARDWARE_CLIP                  FALSE
-
-        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
-    #endif
-
-// The custom format is not defined for some reason, so define it as error
-// so we don't get compiler warnings
-#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
-
-#define GDISP_USE_GFXNET                             FALSE
-//    #define GDISP_GFXNET_PORT                        13001
-//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
-//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
-//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GWIN                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GWIN                                 FALSE
-
-//#define GWIN_NEED_WINDOWMANAGER                      FALSE
-//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
-//    #define GWIN_REDRAW_SINGLEOP                     FALSE
-//    #define GWIN_NEED_FLASHING                       FALSE
-//        #define GWIN_FLASHING_PERIOD                 250
-
-//#define GWIN_NEED_CONSOLE                            FALSE
-//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
-//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
-//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
-//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
-//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
-//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
-//#define GWIN_NEED_GRAPH                              FALSE
-//#define GWIN_NEED_GL3D                               FALSE
-
-//#define GWIN_NEED_WIDGET                             FALSE
-//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
-//    #define GWIN_NEED_LABEL                          FALSE
-//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
-//    #define GWIN_NEED_BUTTON                         FALSE
-//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
-//    #define GWIN_NEED_SLIDER                         FALSE
-//        #define GWIN_SLIDER_NOSNAP                   FALSE
-//        #define GWIN_SLIDER_DEAD_BAND                5
-//        #define GWIN_SLIDER_TOGGLE_INC               20
-//    #define GWIN_NEED_CHECKBOX                       FALSE
-//    #define GWIN_NEED_IMAGE                          FALSE
-//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
-//    #define GWIN_NEED_RADIO                          FALSE
-//    #define GWIN_NEED_LIST                           FALSE
-//        #define GWIN_NEED_LIST_IMAGES                FALSE
-//    #define GWIN_NEED_PROGRESSBAR                    FALSE
-//        #define GWIN_PROGRESSBAR_AUTO                FALSE
-//    #define GWIN_NEED_KEYBOARD                       FALSE
-//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
-//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
-//    #define GWIN_NEED_TEXTEDIT                       FALSE
-//    #define GWIN_FLAT_STYLING                        FALSE
-//    #define GWIN_WIDGET_TAGS                         FALSE
-
-//#define GWIN_NEED_CONTAINERS                         FALSE
-//    #define GWIN_NEED_CONTAINER                      FALSE
-//    #define GWIN_NEED_FRAME                          FALSE
-//    #define GWIN_NEED_TABSET                         FALSE
-//        #define GWIN_TABSET_TABHEIGHT                18
-
-
-///////////////////////////////////////////////////////////////////////////
-// GEVENT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GEVENT                               TRUE
-
-//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
-//#define GEVENT_MAXIMUM_SIZE                          32
-//#define GEVENT_MAX_SOURCE_LISTENERS                  32
-
-
-///////////////////////////////////////////////////////////////////////////
-// GTIMER                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GTIMER                               FALSE
-
-//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
-//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
-
-
-///////////////////////////////////////////////////////////////////////////
-// GQUEUE                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GQUEUE                               FALSE
-
-//#define GQUEUE_NEED_ASYNC                            FALSE
-//#define GQUEUE_NEED_GSYNC                            FALSE
-//#define GQUEUE_NEED_FSYNC                            FALSE
-//#define GQUEUE_NEED_BUFFERS                          FALSE
-
-///////////////////////////////////////////////////////////////////////////
-// GINPUT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GINPUT                               FALSE
-
-//#define GINPUT_NEED_MOUSE                            FALSE
-//    #define GINPUT_TOUCH_STARTRAW                    FALSE
-//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
-//    #define GINPUT_MOUSE_POLL_PERIOD                 25
-//    #define GINPUT_MOUSE_CLICK_TIME                  300
-//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
-//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
-//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
-//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
-//#define GINPUT_NEED_KEYBOARD                         FALSE
-//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
-//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
-//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
-//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
-//#define GINPUT_NEED_TOGGLE                           FALSE
-//#define GINPUT_NEED_DIAL                             FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GFILE                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GFILE                                FALSE
-
-//#define GFILE_NEED_PRINTG                            FALSE
-//#define GFILE_NEED_SCANG                             FALSE
-//#define GFILE_NEED_STRINGS                           FALSE
-//#define GFILE_NEED_FILELISTS                         FALSE
-//#define GFILE_NEED_STDIO                             FALSE
-//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
-//#define GFILE_NEED_NOAUTOSYNC                        FALSE
-
-//#define GFILE_NEED_MEMFS                             FALSE
-//#define GFILE_NEED_ROMFS                             FALSE
-//#define GFILE_NEED_RAMFS                             FALSE
-//#define GFILE_NEED_FATFS                             FALSE
-//#define GFILE_NEED_NATIVEFS                          FALSE
-//#define GFILE_NEED_CHBIOSFS                          FALSE
-
-//#define GFILE_ALLOW_FLOATS                           FALSE
-//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
-//#define GFILE_MAX_GFILES                             3
-
-///////////////////////////////////////////////////////////////////////////
-// GADC                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GADC                                 FALSE
-
-//#define GADC_MAX_LOWSPEED_DEVICES                    4
-
-
-///////////////////////////////////////////////////////////////////////////
-// GAUDIO                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GAUDIO                               FALSE
-// There seems to be a bug in the ugfx code, the wrong define is used
-// So define it in order to avoid warnings
-#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
-//    #define GAUDIO_NEED_PLAY                         FALSE
-//    #define GAUDIO_NEED_RECORD                       FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GMISC                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GMISC                                TRUE
-
-//#define GMISC_NEED_ARRAYOPS                          FALSE
-//#define GMISC_NEED_FASTTRIG                          FALSE
-//#define GMISC_NEED_FIXEDTRIG                         FALSE
-//#define GMISC_NEED_INVSQRT                           FALSE
-//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
-//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
-#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
-#define GMISC_NEED_MATRIXFIXED2D                     FALSE
+#include "common_gfxconf.h"
 
 #endif /* _GFXCONF_H */
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
index fb34dbb9a4..32273e08aa 100644
--- a/keyboards/whitefox/rules.mk
+++ b/keyboards/whitefox/rules.mk
@@ -1,7 +1,6 @@
 # project specific files
 SRC =	matrix.c \
-	led.c \
-	animations.c
+	led.c
 
 ## chip/board settings
 # - the next two should match the directories in
@@ -70,4 +69,6 @@ CUSTOM_MATRIX = yes # Custom matrix file
 BACKLIGHT_ENABLE = yes
 VISUALIZER_ENABLE = yes
 
-include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 16 
+LED_HEIGHT = 5
\ No newline at end of file
diff --git a/keyboards/whitefox/visualizer.c b/keyboards/whitefox/visualizer.c
index 167e0ec4de..e5bafcbe95 100644
--- a/keyboards/whitefox/visualizer.c
+++ b/keyboards/whitefox/visualizer.c
@@ -20,7 +20,7 @@
 #include "visualizer.h"
 #include "visualizer_keyframes.h"
 #include "led.h"
-#include "animations.h"
+#include "default_animations.h"
 
 
 static bool initial_update = true;