Merge remote-tracking branch 'upstream/develop'

10 files changed, 31 insertions, 114 deletions

diff --git a/keyboards/zvecr/split_blackpill/config.h b/keyboards/zvecr/split_blackpill/config.h
index 3a7873bb74..2f8984f51a 100644
--- a/keyboards/zvecr/split_blackpill/config.h
+++ b/keyboards/zvecr/split_blackpill/config.h
@@ -15,11 +15,6 @@
  */
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 8 // Rows are doubled-up
-#define MATRIX_COLS 6
 
 /*
  * Keyboard Matrix Assignments
@@ -41,11 +36,7 @@
 
 #define MATRIX_IO_DELAY 5
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
 #define SPLIT_HAND_PIN B3
-#define SOFT_SERIAL_PIN B6
 #define SELECT_SOFT_SERIAL_SPEED 0
 
 #define RGB_DI_PIN B4
@@ -67,40 +58,11 @@
 #define WS2812_DMA_STREAM STM32_DMA1_STREAM3
 #define WS2812_DMA_CHANNEL 3
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -116,9 +78,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
-#define BOOTMAGIC_LITE_ROW_RIGHT 4
-#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
diff --git a/keyboards/zvecr/split_blackpill/info.json b/keyboards/zvecr/split_blackpill/info.json
index 4274e29e08..d8245be308 100644
--- a/keyboards/zvecr/split_blackpill/info.json
+++ b/keyboards/zvecr/split_blackpill/info.json
@@ -8,6 +8,15 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "split": {
+        "soft_serial_pin": "B6",
+        "bootmagic": {
+            "matrix": [4, 0]
+        }
+    },
+    "processor": "STM32F103",
+    "bootloader": "stm32duino",
+    "community_layouts": ["ortho_4x12"],
     "layouts": {
         "LAYOUT_ortho_4x12": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
diff --git a/keyboards/zvecr/split_blackpill/rules.mk b/keyboards/zvecr/split_blackpill/rules.mk
index 46a07109fa..c953eea031 100644
--- a/keyboards/zvecr/split_blackpill/rules.mk
+++ b/keyboards/zvecr/split_blackpill/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = STM32F103
-
-# Bootloader selection
-BOOTLOADER = stm32duino
-
 # Build Options
 #   change yes to no to disable
 #
@@ -21,8 +15,6 @@ SPLIT_KEYBOARD = yes
 SERIAL_DRIVER = usart
 WS2812_DRIVER = pwm
 
-LAYOUTS = ortho_4x12
-
 # Disable unsupported hardware
 AUDIO_SUPPORTED = no
 BACKLIGHT_SUPPORTED = no
diff --git a/keyboards/zvecr/zv48/config.h b/keyboards/zvecr/zv48/config.h
index 87ba0ff317..97b0393aab 100644
--- a/keyboards/zvecr/zv48/config.h
+++ b/keyboards/zvecr/zv48/config.h
@@ -15,11 +15,6 @@
  */
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 8 // Rows are doubled-up
-#define MATRIX_COLS 6
 
 /*
  * Keyboard Matrix Assignments
@@ -41,17 +36,10 @@
 
 #define MATRIX_IO_DELAY 5
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
 #define SPLIT_HAND_PIN B9
-#define SOFT_SERIAL_PIN B6
 //#define SELECT_SOFT_SERIAL_SPEED 0
 #define SERIAL_USART_SPEED 921600
 
-#define ENCODERS_PAD_A { B5 }
-#define ENCODERS_PAD_B { A2 }
-
 #define RGB_DI_PIN B1
 #define RGBLED_NUM 48
 #define RGBLED_SPLIT {24, 24}
@@ -73,40 +61,11 @@
 #define WS2812_DMA_STREAM STM32_DMA1_STREAM2
 #define WS2812_DMA_CHANNEL 5
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -122,9 +81,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-#define BOOTMAGIC_LITE_ROW 0
-#define BOOTMAGIC_LITE_COLUMN 0
-#define BOOTMAGIC_LITE_ROW_RIGHT 4
-#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
diff --git a/keyboards/zvecr/zv48/f401/info.json b/keyboards/zvecr/zv48/f401/info.json
new file mode 100644
index 0000000000..acd7e83f77
--- /dev/null
+++ b/keyboards/zvecr/zv48/f401/info.json
@@ -0,0 +1,5 @@
+{
+    "processor": "STM32F401",
+    "bootloader": "stm32-dfu",
+    "board": "BLACKPILL_STM32_F401"
+}
diff --git a/keyboards/zvecr/zv48/f401/rules.mk b/keyboards/zvecr/zv48/f401/rules.mk
index 37ee7172f8..4df55cd220 100644
--- a/keyboards/zvecr/zv48/f401/rules.mk
+++ b/keyboards/zvecr/zv48/f401/rules.mk
@@ -1,10 +1,3 @@
-# MCU name
-MCU = STM32F401
-BOARD = BLACKPILL_STM32_F401
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
-
 # Disable unsupported hardware
 AUDIO_SUPPORTED = no
 BACKLIGHT_SUPPORTED = no
diff --git a/keyboards/zvecr/zv48/f411/info.json b/keyboards/zvecr/zv48/f411/info.json
new file mode 100644
index 0000000000..2517a82403
--- /dev/null
+++ b/keyboards/zvecr/zv48/f411/info.json
@@ -0,0 +1,5 @@
+{
+    "processor": "STM32F411",
+    "bootloader": "stm32-dfu",
+    "board": "BLACKPILL_STM32_F411"
+}
diff --git a/keyboards/zvecr/zv48/f411/rules.mk b/keyboards/zvecr/zv48/f411/rules.mk
index c25a64f4b3..e69de29bb2 100644
--- a/keyboards/zvecr/zv48/f411/rules.mk
+++ b/keyboards/zvecr/zv48/f411/rules.mk
@@ -1,6 +0,0 @@
-# MCU name
-MCU = STM32F411
-BOARD = BLACKPILL_STM32_F411
-
-# Bootloader selection
-BOOTLOADER = stm32-dfu
diff --git a/keyboards/zvecr/zv48/info.json b/keyboards/zvecr/zv48/info.json
index 94862b3aee..f3519b94f4 100644
--- a/keyboards/zvecr/zv48/info.json
+++ b/keyboards/zvecr/zv48/info.json
@@ -8,6 +8,18 @@
         "pid": "0x0048",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B5", "pin_b": "A2"}
+        ]
+    },
+    "split": {
+        "soft_serial_pin": "B6",
+        "bootmagic": {
+            "matrix": [4, 0]
+        }
+    },
+    "community_layouts": ["ortho_4x12"],
     "layouts": {
         "LAYOUT_ortho_4x12": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
diff --git a/keyboards/zvecr/zv48/rules.mk b/keyboards/zvecr/zv48/rules.mk
index a524934e9f..0db8344a63 100644
--- a/keyboards/zvecr/zv48/rules.mk
+++ b/keyboards/zvecr/zv48/rules.mk
@@ -18,5 +18,3 @@ SERIAL_DRIVER = usart
 WS2812_DRIVER = pwm
 
 DEFAULT_FOLDER = zvecr/zv48/f401
-
-LAYOUTS = ortho_4x12