Move matrix config to info.json, part 5 (#20003)

Co-authored-by: Nick Brassel <nick@tzarc.org>

86 files changed, 215 insertions, 673 deletions

diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h
index 6f8d6f9b8b..d34fd6468c 100644
--- a/keyboards/wilba_tech/rama_works_kara/config.h
+++ b/keyboards/wilba_tech/rama_works_kara/config.h
@@ -15,18 +15,10 @@
  */
 #pragma once
 
-
-// M60-A PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_kara/info.json b/keyboards/wilba_tech/rama_works_kara/info.json
index 18bba59fe5..3dd9ad22c2 100644
--- a/keyboards/wilba_tech/rama_works_kara/info.json
+++ b/keyboards/wilba_tech/rama_works_kara/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4B52",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["60_hhkb"],
diff --git a/keyboards/wilba_tech/rama_works_koyu/config.h b/keyboards/wilba_tech/rama_works_koyu/config.h
index c0b005d443..c3bb43ec6d 100644
--- a/keyboards/wilba_tech/rama_works_koyu/config.h
+++ b/keyboards/wilba_tech/rama_works_koyu/config.h
@@ -15,18 +15,10 @@
  */
 #pragma once
 
-
-// KOYU PCB pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_koyu/info.json b/keyboards/wilba_tech/rama_works_koyu/info.json
index 190638c001..55a180af63 100644
--- a/keyboards/wilba_tech/rama_works_koyu/info.json
+++ b/keyboards/wilba_tech/rama_works_koyu/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4B59",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m10_b/config.h b/keyboards/wilba_tech/rama_works_m10_b/config.h
index be92b36639..00ecf5f186 100644
--- a/keyboards/wilba_tech/rama_works_m10_b/config.h
+++ b/keyboards/wilba_tech/rama_works_m10_b/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m10_b/info.json b/keyboards/wilba_tech/rama_works_m10_b/info.json
index 4b7c87be21..0133776586 100644
--- a/keyboards/wilba_tech/rama_works_m10_b/info.json
+++ b/keyboards/wilba_tech/rama_works_m10_b/info.json
@@ -8,6 +8,11 @@
     "pid": "0x00AB",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
+    "rows": ["E6"]
+  },
+  "diode_direction": "COL2ROW",
   "backlight": {
     "pin": "C6"
   },
diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h
index 9f68eb4287..1cc9655b1b 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/config.h
+++ b/keyboards/wilba_tech/rama_works_m10_c/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D7, B6, F0, D6, B5, F1, D4, B4, F4, F5 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m10_c/info.json b/keyboards/wilba_tech/rama_works_m10_c/info.json
index b60dd53815..6b6bd3d61b 100644
--- a/keyboards/wilba_tech/rama_works_m10_c/info.json
+++ b/keyboards/wilba_tech/rama_works_m10_c/info.json
@@ -8,6 +8,11 @@
     "pid": "0x00AC",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D7", "B6", "F0", "D6", "B5", "F1", "D4", "B4", "F4", "F5"],
+    "rows": ["E6"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
   "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m50_a/config.h b/keyboards/wilba_tech/rama_works_m50_a/config.h
index 79a1614268..ab04ab070b 100644
--- a/keyboards/wilba_tech/rama_works_m50_a/config.h
+++ b/keyboards/wilba_tech/rama_works_m50_a/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F5, F6 }
-#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m50_a/info.json b/keyboards/wilba_tech/rama_works_m50_a/info.json
index a53a960f0a..e26b56dd2f 100644
--- a/keyboards/wilba_tech/rama_works_m50_a/info.json
+++ b/keyboards/wilba_tech/rama_works_m50_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x050A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"],
+        "rows": ["F0", "F1", "F5", "F6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m50_ax/config.h b/keyboards/wilba_tech/rama_works_m50_ax/config.h
index add6c1c779..9b6b3c7955 100644
--- a/keyboards/wilba_tech/rama_works_m50_ax/config.h
+++ b/keyboards/wilba_tech/rama_works_m50_ax/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F5, F6 }
-#define MATRIX_COL_PINS { F4, B5, C7, C6, B6, B2, B3, B1, B4, D7, D6, D4, D3 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m50_ax/info.json b/keyboards/wilba_tech/rama_works_m50_ax/info.json
index 2fc265fec9..fc296c2754 100644
--- a/keyboards/wilba_tech/rama_works_m50_ax/info.json
+++ b/keyboards/wilba_tech/rama_works_m50_ax/info.json
@@ -8,6 +8,11 @@
         "pid": "0x150A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "B5", "C7", "C6", "B6", "B2", "B3", "B1", "B4", "D7", "D6", "D4", "D3"],
+        "rows": ["F0", "F1", "F5", "F6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m60_a/config.h b/keyboards/wilba_tech/rama_works_m60_a/config.h
index acc21edc28..c80a018496 100644
--- a/keyboards/wilba_tech/rama_works_m60_a/config.h
+++ b/keyboards/wilba_tech/rama_works_m60_a/config.h
@@ -15,18 +15,10 @@
  */
 #pragma once
 
-
-// M60-A PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack
diff --git a/keyboards/wilba_tech/rama_works_m60_a/info.json b/keyboards/wilba_tech/rama_works_m60_a/info.json
index d76b178947..8ba17a5df2 100644
--- a/keyboards/wilba_tech/rama_works_m60_a/info.json
+++ b/keyboards/wilba_tech/rama_works_m60_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x060A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["60_hhkb"],
diff --git a/keyboards/wilba_tech/rama_works_m65_b/config.h b/keyboards/wilba_tech/rama_works_m65_b/config.h
index 5b745b109d..6d3f0fb97f 100644
--- a/keyboards/wilba_tech/rama_works_m65_b/config.h
+++ b/keyboards/wilba_tech/rama_works_m65_b/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m65_b/info.json b/keyboards/wilba_tech/rama_works_m65_b/info.json
index 55f9f05536..a8ca36bf16 100644
--- a/keyboards/wilba_tech/rama_works_m65_b/info.json
+++ b/keyboards/wilba_tech/rama_works_m65_b/info.json
@@ -8,6 +8,11 @@
         "pid": "0x065B",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m65_bx/config.h b/keyboards/wilba_tech/rama_works_m65_bx/config.h
index eb2b08304a..e367a7fc76 100644
--- a/keyboards/wilba_tech/rama_works_m65_bx/config.h
+++ b/keyboards/wilba_tech/rama_works_m65_bx/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m65_bx/info.json b/keyboards/wilba_tech/rama_works_m65_bx/info.json
index ca5bf2b21e..1e4af340db 100644
--- a/keyboards/wilba_tech/rama_works_m65_bx/info.json
+++ b/keyboards/wilba_tech/rama_works_m65_bx/info.json
@@ -8,6 +8,11 @@
         "pid": "0x165B",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m6_a/config.h b/keyboards/wilba_tech/rama_works_m6_a/config.h
index 9937b3f5be..6a19f1e7e9 100644
--- a/keyboards/wilba_tech/rama_works_m6_a/config.h
+++ b/keyboards/wilba_tech/rama_works_m6_a/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m6_a/info.json b/keyboards/wilba_tech/rama_works_m6_a/info.json
index 67912b6ce0..5158e7e06f 100644
--- a/keyboards/wilba_tech/rama_works_m6_a/info.json
+++ b/keyboards/wilba_tech/rama_works_m6_a/info.json
@@ -8,6 +8,11 @@
     "pid": "0x006A",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D4", "B5", "F4", "D7", "C6", "F6"],
+    "rows": ["E6"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
   "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_m6_b/config.h b/keyboards/wilba_tech/rama_works_m6_b/config.h
index 6b6b405cd0..a117bcc2a8 100644
--- a/keyboards/wilba_tech/rama_works_m6_b/config.h
+++ b/keyboards/wilba_tech/rama_works_m6_b/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_m6_b/info.json b/keyboards/wilba_tech/rama_works_m6_b/info.json
index 96fc84b002..3a3b32d1df 100644
--- a/keyboards/wilba_tech/rama_works_m6_b/info.json
+++ b/keyboards/wilba_tech/rama_works_m6_b/info.json
@@ -8,6 +8,11 @@
     "pid": "0x006B",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["D4", "B5", "F4", "D7", "C6", "F6"],
+    "rows": ["E6"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
   "layouts": {
diff --git a/keyboards/wilba_tech/rama_works_u80_a/config.h b/keyboards/wilba_tech/rama_works_u80_a/config.h
index 8a94e15b47..cb2d88bd47 100644
--- a/keyboards/wilba_tech/rama_works_u80_a/config.h
+++ b/keyboards/wilba_tech/rama_works_u80_a/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/rama_works_u80_a/info.json b/keyboards/wilba_tech/rama_works_u80_a/info.json
index 27a5fe7148..2ee00ae161 100644
--- a/keyboards/wilba_tech/rama_works_u80_a/info.json
+++ b/keyboards/wilba_tech/rama_works_u80_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x080A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
+        "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h
index 0179cfaa64..488eeade83 100644
--- a/keyboards/wilba_tech/wt60_a/config.h
+++ b/keyboards/wilba_tech/wt60_a/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_a/info.json b/keyboards/wilba_tech/wt60_a/info.json
index 85b1e2e6a1..e429b635de 100644
--- a/keyboards/wilba_tech/wt60_a/info.json
+++ b/keyboards/wilba_tech/wt60_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x060A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt60_b/config.h b/keyboards/wilba_tech/wt60_b/config.h
index 887e11c81f..cf495a2e78 100644
--- a/keyboards/wilba_tech/wt60_b/config.h
+++ b/keyboards/wilba_tech/wt60_b/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_b/info.json b/keyboards/wilba_tech/wt60_b/info.json
index 6e8d463abb..1a9338a5c8 100644
--- a/keyboards/wilba_tech/wt60_b/info.json
+++ b/keyboards/wilba_tech/wt60_b/info.json
@@ -8,6 +8,11 @@
         "pid": "0x60B0",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt60_bx/config.h b/keyboards/wilba_tech/wt60_bx/config.h
index 5bc298d70e..6f89b14954 100644
--- a/keyboards/wilba_tech/wt60_bx/config.h
+++ b/keyboards/wilba_tech/wt60_bx/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_bx/info.json b/keyboards/wilba_tech/wt60_bx/info.json
index 8c3cf7de2a..9b63c7f8e7 100644
--- a/keyboards/wilba_tech/wt60_bx/info.json
+++ b/keyboards/wilba_tech/wt60_bx/info.json
@@ -8,6 +8,11 @@
         "pid": "0x60B1",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt60_c/config.h b/keyboards/wilba_tech/wt60_c/config.h
index 7b7fdaf020..776aebcf20 100644
--- a/keyboards/wilba_tech/wt60_c/config.h
+++ b/keyboards/wilba_tech/wt60_c/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_c/info.json b/keyboards/wilba_tech/wt60_c/info.json
index b39a2786a4..b23b639c7e 100644
--- a/keyboards/wilba_tech/wt60_c/info.json
+++ b/keyboards/wilba_tech/wt60_c/info.json
@@ -8,6 +8,11 @@
         "pid": "0x60C0",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt60_g/config.h b/keyboards/wilba_tech/wt60_g/config.h
index 3264526694..9541b1df12 100644
--- a/keyboards/wilba_tech/wt60_g/config.h
+++ b/keyboards/wilba_tech/wt60_g/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_g/info.json b/keyboards/wilba_tech/wt60_g/info.json
index 5c22b6dc21..113729e250 100644
--- a/keyboards/wilba_tech/wt60_g/info.json
+++ b/keyboards/wilba_tech/wt60_g/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0021",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt60_g2/config.h b/keyboards/wilba_tech/wt60_g2/config.h
index c841f6365a..b7d24e1cd3 100644
--- a/keyboards/wilba_tech/wt60_g2/config.h
+++ b/keyboards/wilba_tech/wt60_g2/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_g2/info.json b/keyboards/wilba_tech/wt60_g2/info.json
index 33b0fd0d50..b1d34eb65d 100644
--- a/keyboards/wilba_tech/wt60_g2/info.json
+++ b/keyboards/wilba_tech/wt60_g2/info.json
@@ -8,6 +8,11 @@
         "pid": "0x002F",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt60_h1/config.h b/keyboards/wilba_tech/wt60_h1/config.h
index 3264526694..9541b1df12 100644
--- a/keyboards/wilba_tech/wt60_h1/config.h
+++ b/keyboards/wilba_tech/wt60_h1/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_h1/info.json b/keyboards/wilba_tech/wt60_h1/info.json
index 928ea8ba8a..4ef210f05f 100644
--- a/keyboards/wilba_tech/wt60_h1/info.json
+++ b/keyboards/wilba_tech/wt60_h1/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0024",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["60_tsangan_hhkb"],
diff --git a/keyboards/wilba_tech/wt60_h2/config.h b/keyboards/wilba_tech/wt60_h2/config.h
index 3264526694..9541b1df12 100644
--- a/keyboards/wilba_tech/wt60_h2/config.h
+++ b/keyboards/wilba_tech/wt60_h2/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_h2/info.json b/keyboards/wilba_tech/wt60_h2/info.json
index e9c59d1b8c..046a8526bc 100644
--- a/keyboards/wilba_tech/wt60_h2/info.json
+++ b/keyboards/wilba_tech/wt60_h2/info.json
@@ -8,6 +8,11 @@
         "pid": "0x002B",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt60_h3/config.h b/keyboards/wilba_tech/wt60_h3/config.h
index 3264526694..9541b1df12 100644
--- a/keyboards/wilba_tech/wt60_h3/config.h
+++ b/keyboards/wilba_tech/wt60_h3/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } // D4, B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_h3/info.json b/keyboards/wilba_tech/wt60_h3/info.json
index df002063a3..f4cb4bedbc 100644
--- a/keyboards/wilba_tech/wt60_h3/info.json
+++ b/keyboards/wilba_tech/wt60_h3/info.json
@@ -8,6 +8,11 @@
         "pid": "0x002C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layout_aliases": {
diff --git a/keyboards/wilba_tech/wt60_xt/config.h b/keyboards/wilba_tech/wt60_xt/config.h
index 888197a216..ea2f490317 100644
--- a/keyboards/wilba_tech/wt60_xt/config.h
+++ b/keyboards/wilba_tech/wt60_xt/config.h
@@ -20,22 +20,6 @@
 #define AUDIO_PIN C6
 #define AUDIO_CLICKY
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt60_xt/info.json b/keyboards/wilba_tech/wt60_xt/info.json
index d31d8380b1..edbd17a5c3 100644
--- a/keyboards/wilba_tech/wt60_xt/info.json
+++ b/keyboards/wilba_tech/wt60_xt/info.json
@@ -8,6 +8,11 @@
         "pid": "0x001C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h
index 906887f3fa..aa75002b4f 100644
--- a/keyboards/wilba_tech/wt65_a/config.h
+++ b/keyboards/wilba_tech/wt65_a/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_a/info.json b/keyboards/wilba_tech/wt65_a/info.json
index 1c73d40556..1b56bd785c 100644
--- a/keyboards/wilba_tech/wt65_a/info.json
+++ b/keyboards/wilba_tech/wt65_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x065A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt65_b/config.h b/keyboards/wilba_tech/wt65_b/config.h
index 2cec4c23d7..60cdbe4cc6 100644
--- a/keyboards/wilba_tech/wt65_b/config.h
+++ b/keyboards/wilba_tech/wt65_b/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_b/info.json b/keyboards/wilba_tech/wt65_b/info.json
index 17dc827d55..5ac0d81f28 100644
--- a/keyboards/wilba_tech/wt65_b/info.json
+++ b/keyboards/wilba_tech/wt65_b/info.json
@@ -8,6 +8,11 @@
         "pid": "0x065B",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt65_d/config.h b/keyboards/wilba_tech/wt65_d/config.h
index d383760f19..f37e4b2db6 100644
--- a/keyboards/wilba_tech/wt65_d/config.h
+++ b/keyboards/wilba_tech/wt65_d/config.h
@@ -3,11 +3,6 @@
 
 #pragma once
 
-// Keyboard Matrix Assignments
-#define MATRIX_ROW_PINS { E6, F0, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, D3, D2, B7, B0, B3, C7, C6, B6, B5, B4, D7, D6, D4 }
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap 
 #define LOCKING_SUPPORT_ENABLE
 
diff --git a/keyboards/wilba_tech/wt65_d/info.json b/keyboards/wilba_tech/wt65_d/info.json
index 68dc46d548..dec1e89e95 100644
--- a/keyboards/wilba_tech/wt65_d/info.json
+++ b/keyboards/wilba_tech/wt65_d/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0031",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "D3", "D2", "B7", "B0", "B3", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["E6", "F0", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "indicators": {
         "caps_lock": "F1"
     },
diff --git a/keyboards/wilba_tech/wt65_f/config.h b/keyboards/wilba_tech/wt65_f/config.h
index bf47e02d25..b7d24e1cd3 100644
--- a/keyboards/wilba_tech/wt65_f/config.h
+++ b/keyboards/wilba_tech/wt65_f/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_f/info.json b/keyboards/wilba_tech/wt65_f/info.json
index f5916bea1b..9cf7004132 100644
--- a/keyboards/wilba_tech/wt65_f/info.json
+++ b/keyboards/wilba_tech/wt65_f/info.json
@@ -8,6 +8,11 @@
         "pid": "0x002D",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt65_fx/config.h b/keyboards/wilba_tech/wt65_fx/config.h
index bf47e02d25..b7d24e1cd3 100644
--- a/keyboards/wilba_tech/wt65_fx/config.h
+++ b/keyboards/wilba_tech/wt65_fx/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_fx/info.json b/keyboards/wilba_tech/wt65_fx/info.json
index afbc80b8c1..d9195621e2 100644
--- a/keyboards/wilba_tech/wt65_fx/info.json
+++ b/keyboards/wilba_tech/wt65_fx/info.json
@@ -8,6 +8,11 @@
         "pid": "0x002E",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt65_g/config.h b/keyboards/wilba_tech/wt65_g/config.h
index 807b7fa8ee..9541b1df12 100644
--- a/keyboards/wilba_tech/wt65_g/config.h
+++ b/keyboards/wilba_tech/wt65_g/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_g/info.json b/keyboards/wilba_tech/wt65_g/info.json
index bdfea960a4..1f794e5e37 100644
--- a/keyboards/wilba_tech/wt65_g/info.json
+++ b/keyboards/wilba_tech/wt65_g/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0022",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt65_g2/config.h b/keyboards/wilba_tech/wt65_g2/config.h
index 807b7fa8ee..9541b1df12 100644
--- a/keyboards/wilba_tech/wt65_g2/config.h
+++ b/keyboards/wilba_tech/wt65_g2/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_g2/info.json b/keyboards/wilba_tech/wt65_g2/info.json
index 5d8769625a..b3d8d3bdbb 100644
--- a/keyboards/wilba_tech/wt65_g2/info.json
+++ b/keyboards/wilba_tech/wt65_g2/info.json
@@ -8,6 +8,11 @@
         "pid": "0x002A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt65_h1/config.h b/keyboards/wilba_tech/wt65_h1/config.h
index 807b7fa8ee..9541b1df12 100644
--- a/keyboards/wilba_tech/wt65_h1/config.h
+++ b/keyboards/wilba_tech/wt65_h1/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 } // B7, B0
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_h1/info.json b/keyboards/wilba_tech/wt65_h1/info.json
index 2ccb1d9099..65e8c39016 100644
--- a/keyboards/wilba_tech/wt65_h1/info.json
+++ b/keyboards/wilba_tech/wt65_h1/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0025",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["65_ansi_blocker_tsangan"],
diff --git a/keyboards/wilba_tech/wt65_xt/config.h b/keyboards/wilba_tech/wt65_xt/config.h
index 525df76d1b..9541b1df12 100644
--- a/keyboards/wilba_tech/wt65_xt/config.h
+++ b/keyboards/wilba_tech/wt65_xt/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_xt/info.json b/keyboards/wilba_tech/wt65_xt/info.json
index 575d1c3add..98c21c8230 100644
--- a/keyboards/wilba_tech/wt65_xt/info.json
+++ b/keyboards/wilba_tech/wt65_xt/info.json
@@ -8,6 +8,11 @@
         "pid": "0x001D",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt65_xtx/config.h b/keyboards/wilba_tech/wt65_xtx/config.h
index c799ec8bc4..9b6b3c7955 100644
--- a/keyboards/wilba_tech/wt65_xtx/config.h
+++ b/keyboards/wilba_tech/wt65_xtx/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt65_xtx/info.json b/keyboards/wilba_tech/wt65_xtx/info.json
index 196044185b..e9394e8a02 100644
--- a/keyboards/wilba_tech/wt65_xtx/info.json
+++ b/keyboards/wilba_tech/wt65_xtx/info.json
@@ -8,6 +8,11 @@
         "pid": "0x001E",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt69_a/config.h b/keyboards/wilba_tech/wt69_a/config.h
index e893d73def..bc06d6ce9c 100644
--- a/keyboards/wilba_tech/wt69_a/config.h
+++ b/keyboards/wilba_tech/wt69_a/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { B7, B0, F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt69_a/info.json b/keyboards/wilba_tech/wt69_a/info.json
index 67faf978d4..7d643b66ce 100644
--- a/keyboards/wilba_tech/wt69_a/info.json
+++ b/keyboards/wilba_tech/wt69_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x069A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B7", "B0", "F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt70_jb/config.h b/keyboards/wilba_tech/wt70_jb/config.h
index 0a853d659c..afc09fb5fe 100644
--- a/keyboards/wilba_tech/wt70_jb/config.h
+++ b/keyboards/wilba_tech/wt70_jb/config.h
@@ -15,23 +15,6 @@
  */
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6, F0, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, D3, D2, D1, D0, B7, C7, C6, B6, B5, B4, D7, D6, D4, B0, B3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt70_jb/info.json b/keyboards/wilba_tech/wt70_jb/info.json
index a004bb43a0..a913e0b225 100644
--- a/keyboards/wilba_tech/wt70_jb/info.json
+++ b/keyboards/wilba_tech/wt70_jb/info.json
@@ -8,6 +8,11 @@
         "pid": "0x001F",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "D3", "D2", "D1", "D0", "B7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B0", "B3"],
+        "rows": ["E6", "F0", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h
index d678e7f0e9..4638b0fba9 100644
--- a/keyboards/wilba_tech/wt75_a/config.h
+++ b/keyboards/wilba_tech/wt75_a/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt75_a/info.json b/keyboards/wilba_tech/wt75_a/info.json
index 2434233335..a531ab8a19 100644
--- a/keyboards/wilba_tech/wt75_a/info.json
+++ b/keyboards/wilba_tech/wt75_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x075A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt75_b/config.h b/keyboards/wilba_tech/wt75_b/config.h
index e36da68c4e..f519fe6603 100644
--- a/keyboards/wilba_tech/wt75_b/config.h
+++ b/keyboards/wilba_tech/wt75_b/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B7, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B2, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt75_b/info.json b/keyboards/wilba_tech/wt75_b/info.json
index b2bd5a02ae..af090acd3a 100644
--- a/keyboards/wilba_tech/wt75_b/info.json
+++ b/keyboards/wilba_tech/wt75_b/info.json
@@ -8,6 +8,11 @@
         "pid": "0x075B",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B7", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B2", "D4"],
+        "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt75_c/config.h b/keyboards/wilba_tech/wt75_c/config.h
index 0bd449089c..7d07822eb6 100644
--- a/keyboards/wilba_tech/wt75_c/config.h
+++ b/keyboards/wilba_tech/wt75_c/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B7, D4 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt75_c/info.json b/keyboards/wilba_tech/wt75_c/info.json
index 85a9987908..86ccc5df0e 100644
--- a/keyboards/wilba_tech/wt75_c/info.json
+++ b/keyboards/wilba_tech/wt75_c/info.json
@@ -8,6 +8,11 @@
         "pid": "0x075C",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "B7", "D4"],
+        "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h
index 8112d1f888..59cb397a00 100644
--- a/keyboards/wilba_tech/wt80_a/config.h
+++ b/keyboards/wilba_tech/wt80_a/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt80_a/info.json b/keyboards/wilba_tech/wt80_a/info.json
index 337207404a..0a814235d9 100644
--- a/keyboards/wilba_tech/wt80_a/info.json
+++ b/keyboards/wilba_tech/wt80_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x080A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
+        "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "ROW2COL",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt80_bc/config.h b/keyboards/wilba_tech/wt80_bc/config.h
index aa5ba2d573..9541b1df12 100644
--- a/keyboards/wilba_tech/wt80_bc/config.h
+++ b/keyboards/wilba_tech/wt80_bc/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt80_bc/info.json b/keyboards/wilba_tech/wt80_bc/info.json
index e2858d238a..a85325525b 100644
--- a/keyboards/wilba_tech/wt80_bc/info.json
+++ b/keyboards/wilba_tech/wt80_bc/info.json
@@ -8,6 +8,11 @@
         "pid": "0x80B0",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
+        "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt80_g/config.h b/keyboards/wilba_tech/wt80_g/config.h
index aa5ba2d573..9541b1df12 100644
--- a/keyboards/wilba_tech/wt80_g/config.h
+++ b/keyboards/wilba_tech/wt80_g/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4, B7, B0 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt80_g/info.json b/keyboards/wilba_tech/wt80_g/info.json
index 1c7ff192d1..8aec5901ea 100644
--- a/keyboards/wilba_tech/wt80_g/info.json
+++ b/keyboards/wilba_tech/wt80_g/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0023",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "B7", "B0"],
+        "rows": ["F1", "F0", "E6", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/wt8_a/config.h b/keyboards/wilba_tech/wt8_a/config.h
index 3ef5baf588..1377a18714 100644
--- a/keyboards/wilba_tech/wt8_a/config.h
+++ b/keyboards/wilba_tech/wt8_a/config.h
@@ -16,23 +16,6 @@
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { E6 }
-#define MATRIX_COL_PINS { F4, F1, B2, B6, F6, F7, D5, B4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/wilba_tech/wt8_a/info.json b/keyboards/wilba_tech/wt8_a/info.json
index 53cffb13ae..b462b05eeb 100644
--- a/keyboards/wilba_tech/wt8_a/info.json
+++ b/keyboards/wilba_tech/wt8_a/info.json
@@ -8,6 +8,11 @@
         "pid": "0x008A",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F1", "B2", "B6", "F6", "F7", "D5", "B4"],
+        "rows": ["E6"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/wilba_tech/zeal60/config.h b/keyboards/wilba_tech/zeal60/config.h
index 5a3ad34bf7..e57bafe20d 100644
--- a/keyboards/wilba_tech/zeal60/config.h
+++ b/keyboards/wilba_tech/zeal60/config.h
@@ -15,18 +15,10 @@
  */
 #pragma once
 
-
-// Zeal60 PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack
diff --git a/keyboards/wilba_tech/zeal60/info.json b/keyboards/wilba_tech/zeal60/info.json
index 5ef0875419..764b040320 100644
--- a/keyboards/wilba_tech/zeal60/info.json
+++ b/keyboards/wilba_tech/zeal60/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0060",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["60_ansi", "60_iso", "60_hhkb", "60_ansi_split_bs_rshift"],
diff --git a/keyboards/wilba_tech/zeal65/config.h b/keyboards/wilba_tech/zeal65/config.h
index 1ab6b62751..4a73ed3b27 100644
--- a/keyboards/wilba_tech/zeal65/config.h
+++ b/keyboards/wilba_tech/zeal65/config.h
@@ -15,18 +15,10 @@
  */
 #pragma once
 
-
-// Zeal60 PCB default pin-out
-#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
-#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, D4 }
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 2
 #define RGB_MATRIX_LED_COUNT 72
 
-// COL2ROW or ROW2COL
-#define DIODE_DIRECTION COL2ROW
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack
diff --git a/keyboards/wilba_tech/zeal65/info.json b/keyboards/wilba_tech/zeal65/info.json
index 935dc18874..0918277e81 100644
--- a/keyboards/wilba_tech/zeal65/info.json
+++ b/keyboards/wilba_tech/zeal65/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0065",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F5", "D5", "B1", "B2", "B3", "D3", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+        "rows": ["F0", "F1", "F4", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {