Refactoring wilba.tech PCBs, updating Rama Works U80-A (#6272)

* Added WT65-B, WT75-B, minor fixes

* Update keyboards/wilba_tech/wt65_b/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/wilba_tech/wt65_b/readme.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/wilba_tech/wt75_b/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Change DEBOUNCING_DELAY to DEBOUNCE

* Change DEBOUNCING_DELAY to DEBOUNCE

* Move Zeal60/Zeal65 files to keyboards/wilba_tech

* Change DEBOUNCING_DELAY to DEBOUNCE

* Refactoring zeal60 code to wilba_tech

* Moved Rama Works PCBs to wilba_tech

* Rename Rama Works files

* Cleanup info.json

* Cleanup readme.md

* Cleanup USB device strings

* U80-A RGB matrix, IS31FL3731 driver changes

* Fixed #include from keyboards/zeal60

4 files changed, 170 insertions, 0 deletions

diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/Makefile b/keyboards/wilba_tech/zeal60/keymaps/tusing/Makefile
new file mode 100644
index 0000000000..762905da03
--- /dev/null
+++ b/keyboards/wilba_tech/zeal60/keymaps/tusing/Makefile
@@ -0,0 +1,6 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+RGBLIGHT_ENABLE = yes
+AUDIO_ENABLE = no  # Underglow cannot be used with audio.
diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md b/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md
new file mode 100644
index 0000000000..edddf1c58f
--- /dev/null
+++ b/keyboards/wilba_tech/zeal60/keymaps/tusing/README.md
@@ -0,0 +1,80 @@
+# RGB Underglow Strip on the Zeal60: A Guide
+
+<img src="https://i.imgur.com/UuUdOCb.jpg" width="800">
+
+## Requirements
+
+- WS2812B RGB strip, preferably 60 LEDs/meter
+- Wire, solder
+- Tape, hot glue, or some sort of adhesive
+
+## A. Connecting the strip
+You might find the [**full PCB image**](https://cdn.shopify.com/s/files/1/0490/7329/files/zeal60jumpers.png) helpful. Ignore the red boxes!
+
+1. Connect V+ to the receiving end of the thermistor labeled F1; connect GND to the board's GND pin. (*Avoid connecting +V to the board's +5V pin* - you will likely overload the thermistor, and you will limit your maximum brightness.)
+
+    <img src="https://i.imgur.com/jd7qivh.png" width="300">
+
+2. Connect DI to PB0.
+
+    <img src="https://i.imgur.com/BiMyMLv.jpg" width="300">
+
+3. Should look something like this when finished:
+
+    <img src="https://i.imgur.com/ngxYMuA.jpg" width="600">
+
+*Optional:* To allow considerably more light to escape, consider angling the strip outwards by using some sort of fulcrum under the strip. (I used a thick wire.)
+
+## B. Enabling the strip
+1. If it is not present already, add the following to your ***keymap's*** ```Makefile```:
+
+    ```Makefile
+    RGBLIGHT_ENABLE = yes
+    AUDIO_ENABLE = no     #Underglow animations cannot be used with audio.
+    ```
+2. If it is not present already, add the following to your *keymap's* ```config.h```, and edit the values as necessary:
+
+    ```c
+    // Set up RGB underglow.
+    #define RGB_DI_PIN B0          // The pin your RGB strip is wired to
+    #define RGBLIGHT_ANIMATIONS    // Require for fancier stuff (not compatible with audio)
+    #define RGBLED_NUM 35          // Number of LEDs
+    #define RGBLIGHT_HUE_STEP 5    // How much each press of rgb_hue changes hue
+    #define RGBLIGHT_SAT_STEP 10   // How much each press of rgb_sat changes sat
+    #define RGBLIGHT_VAL_STEP 10   // How much each press of rgb_val changes val
+    ```
+3. If they are not present already, add the following keycodes to your keymap to control the RGB strip: ```RGB_TOG``` (on/off), ```RGB_MOD``` (step through modes), ```RGB_HUI```, ```RGB_HUD```, ```RGB_SAI```, ```RGB_SAD```, ```RGB_VAI```, ```RGB_VAD``` (HSV increase/decrease). Add these to your keymap.
+
+## C. Dealing with current limits
+USB 2.0 ports on laptops provide up to 500mA max, but USB 3.0 ports can provide up to 900mA; USB 3.1 up to 1.5A; and powered USB hubs even more. We can run our keyboard at a higher brightness if we draw more power. **The Zeal60 uses 500mA at max brightness.** This means that **you have about 400mA remaining for the strip to use on a USB 3.0 port**; 1000mA free on a USB 3.1 port, so on and so forth.
+
+***Warning:*** **This means you will need to turn *off* your RGB strip before connecting to a USB 2.0 port**, as USB 2.0 cannot sustain the current necessary!
+
+1. If not present already, add the following to your keymap's ```config.h```. Change the numbers based on your needs. The ones below are safe underestimates.
+
+    ```c
+    // Enable current limiting for RGB underglow.
+    #define RGBSTRIP_CURRENT_LIMIT 400    // Strip current limit in mA. (USB amperage - 500mA for keyboard)
+    #define RGBSTRIP_MAX_CURRENT_PER_LIGHT 50 // mA per light when at max brightness.
+    ```
+    *Example:* I use a USB port capable of providing 1800 mA. The keyboard uses 500mA, so my personal value (in the `tusing` keymap) for `RGBSTRIP_CURRENT_LIMIT` is 1300. The particular WS2812B RGB strip I have uses a maximum of 60 mA per LED, so that is my personal value for `RGBSTRIP_MAX_CURRENT_PER_LIGHT`.
+2. Toggle on the LED strip (```RGB_TOG```) and step through animations (```RGB_MOD```) to test it out!
+
+## D. Sources and resources
+### A. Connecting the strip.
+* [In-depth description of connecting an RGB strip to the GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4d5or2/my_first_custom_build_satan_gh60_rbg_underglow_in/d1nz3o7/)
+* [32U4 Pinout](https://40.media.tumblr.com/93b6bbd4113418c2b45459bb177e67c5/tumblr_mi49a20QMB1s5t695o1_1280.png)
+* [Redditor describes connecting RGB strips on his Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4hbjw4/finally_finished_my_satan_gh60_also_granite_o/d2qn8zx/?context=3)
+* [Another Redditor on RGB with the Satan GH60](https://www.reddit.com/r/MechanicalKeyboards/comments/4ewzdx/gh60_satan_with_the_rgb_mod/d251uu6/ )
+
+### B. Enabling the strip.
+* [QMK Wiki portion on underglow](https://github.com/jackhumbert/qmk_firmware/wiki#rgb-under-glow-mod)
+* [Planck ```Makefile```, ```config.h```, and ```keymap.c``` config example](https://github.com/jackhumbert/qmk_firmware/tree/master/keyboards/planck/keymaps/yang)
+* [Video demonstrating keycode functions and RGB modes on a KC60](https://www.youtube.com/watch?v=VKrpPAHlisY)
+
+### C. Dealing with current limits.
+* [Discussion of cutting jumpers and adding resistors to lower current from Zeal60](https://www.reddit.com/r/MechanicalKeyboards/comments/5hou92/photos_zeal60_lets_just_say_santa_came_early_this/db23qid/)
+* [A selection of 900mA-1.5A current hold fuses - look for an SMD 0805-sized fuse.](https://goo.gl/748avG)
+* [Video detailing technique to solder 0805 resistors](https://www.youtube.com/watch?v=PU7wLcuqc-I&t=123s&list=FLheMlKEVQ5cmVXazUt6HrxQ&index=2)
+* [QMK feature request to implement max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/issues/954)
+* [Commit enabling max power draw limits in ```config.h```](https://github.com/jackhumbert/qmk_firmware/commit/83e613ad239459582ae28f78b6c81535b9b138d7)
\ No newline at end of file
diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h b/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h
new file mode 100644
index 0000000000..64aaece501
--- /dev/null
+++ b/keyboards/wilba_tech/zeal60/keymaps/tusing/config.h
@@ -0,0 +1,36 @@
+#pragma once
+
+/* Enable/disable LEDs based on layout. */
+#undef RGB_BACKLIGHT_USE_SPLIT_BACKSPACE
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+
+#undef RGB_BACKLIGHT_USE_7U_SPACEBAR
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+
+#undef RGB_BACKLIGHT_USE_ISO_ENTER
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+
+#undef RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// Set up RGB underglow.
+#define RGB_DI_PIN B0          // The pin your RGB strip is wired to
+#define RGBLIGHT_ANIMATIONS    // Require for fancier stuff (not compatible with audio)
+#define RGBLED_NUM 35          // Number of LEDs
+#define RGBLIGHT_HUE_STEP 5    // How much each press of rgb_hue changes hue
+#define RGBLIGHT_SAT_STEP 10   // How much each press of rgb_sat changes sat
+#define RGBLIGHT_VAL_STEP 10   // How much each press of rgb_val changes val
+
+// Enable current limiting for RGB underglow.
+#define RGBSTRIP_CURRENT_LIMIT 1300    // Strip current limit in mA. (USB amperage - 500mA for keyboard)
+#define RGBSTRIP_MAX_CURRENT_PER_LIGHT 40 // mA per light when at max brightness.
+
+// Scale brightnes according to BRIGHTNESS_CORRECTION_TABLE in quantum/rgblight.c.
+// This allows to mitigate uneven brightness from LED underglow strips.
+// #define LED_BRIGHTNESS_CORRECTION
diff --git a/keyboards/wilba_tech/zeal60/keymaps/tusing/keymap.c b/keyboards/wilba_tech/zeal60/keymaps/tusing/keymap.c
new file mode 100644
index 0000000000..755ace8618
--- /dev/null
+++ b/keyboards/wilba_tech/zeal60/keymaps/tusing/keymap.c
@@ -0,0 +1,48 @@
+// Default layout for Zeal60
+#include QMK_KEYBOARD_H
+
+// For readability.
+#define   _x_   KC_NO
+#define AUD_PRV LCTL(KC_MPRV) // Previous music track
+#define AUD_PLY LCTL(KC_MPLY) // Pause music
+#define AUD_NXT LCTL(KC_MNXT) // Next music track
+
+// Zeal60-specific keys:
+//  EF_INC, EF_DEC,   // next/previous backlight effect
+//  H1_INC, H1_DEC,   // Color 1 hue increase/decrease
+//  S1_INC, S1_DEC,   // Color 1 saturation increase/decrease
+//  H2_INC, H2_DEC,   // Color 2 hue increase/decrease
+//  S2_INC, S2_DEC,   // Color 2 saturation increase/decrease
+//  BR_INC, BR_DEC,   // backlight brightness increase/decrease
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// Default layer: Pressing caps-lock momentarily switches to Layer 1.
+// This is the default layer. Pressing an empty keycode on another layer will take you here.
+    [0] = {
+        {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC},
+        {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS},
+        {MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,    _x_  },
+        {KC_LSFT,   _x_  , KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,   _x_  },
+        {KC_LCTL, KC_LGUI, KC_LALT,   _x_  ,   _x_  ,   _x_  ,   _x_  , KC_SPC,    _x_  ,   _x_  , KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT}
+    },
+
+// Layer 1: Pressing enter switches to layer 2, where backlight controls live.
+// This is a momentary layer: once you let go of caps, you'll be back in layer 1.
+    [1] = {
+        {KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL },
+        {_______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS,  KC_DEL,  _______},
+        {_______, AUD_PRV, AUD_PLY, AUD_NXT, _______, _______, _______, _______, _______, _______, _______, _______, TO(2)  ,   _x_  },
+        {KC_CAPS,   _x_  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _x_  },
+        {KC_RCTL, KC_RGUI, KC_RALT,   _x_  ,   _x_  ,   _x_  ,   _x_  , _______,   _x_  ,   _x_  , KC_HOME, KC_PGUP, KC_PGDN,  KC_END}
+    },
+
+// Layer 2: Zeal60 and backlight configuration. (Get here quickly by pressing Caps+Enter from Layer 1.)
+// This is a persistent layer. Get back to the default layer by pressing enter.
+    [2] = {
+        {RESET,   EF_DEC,  EF_INC,  BR_DEC,  BR_INC,  ES_DEC,  ES_INC,  _______, _______, _______, _______, _______, _______, _______},
+        {_______, H1_DEC,  H1_INC,  S1_DEC,  S1_INC,  _______, _______, _______, _______, _______, _______, _______, _______, _______},
+        {_______, H2_DEC,  H2_INC,  S2_DEC,  S2_INC,  _______, _______, _______, _______, _______, _______, _______, TO(0)  ,   _x_  },
+        {RGB_MOD,   _x_  , RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______,   _x_  },
+        {RGB_TOG, RGB_VAD, RGB_VAI,   _x_  ,   _x_  ,   _x_  ,   _x_  , _______,   _x_  ,   _x_  , _______, _______, _______, _______}
+    }
+};