Move matrix config to info.json, part 3 (#19991)

Co-authored-by: Nick Brassel <nick@tzarc.org>

4 files changed, 17 insertions, 37 deletions

diff --git a/keyboards/takashiski/otaku_split/rev0/config.h b/keyboards/takashiski/otaku_split/rev0/config.h
index 2919d7f0cc..b43d9c74c8 100644
--- a/keyboards/takashiski/otaku_split/rev0/config.h
+++ b/keyboards/takashiski/otaku_split/rev0/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B5,B4,E6,D7,C6 }
-#define MATRIX_COL_PINS { B6,B2,B3,B1,F7,F6,F5,F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/takashiski/otaku_split/rev0/info.json b/keyboards/takashiski/otaku_split/rev0/info.json
index 825cf08d2a..438cddcf30 100644
--- a/keyboards/takashiski/otaku_split/rev0/info.json
+++ b/keyboards/takashiski/otaku_split/rev0/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+        "rows": ["B5", "B4", "E6", "D7", "C6"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D0"
     },
diff --git a/keyboards/takashiski/otaku_split/rev1/config.h b/keyboards/takashiski/otaku_split/rev1/config.h
index 63658aa6d4..6a81e8ddcb 100644
--- a/keyboards/takashiski/otaku_split/rev1/config.h
+++ b/keyboards/takashiski/otaku_split/rev1/config.h
@@ -17,25 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C6,D7,E6,B4,B5 }
-#define MATRIX_COL_PINS { F4,F5,F6,F7,B1,B3,B2,B6 }
-#define MATRIX_ROW_PINS_RIGHT { B5,B4,E6,D7,C6 }
-#define MATRIX_COL_PINS_RIGHT { B6,B2,B3,B1,F7,F6,F5,F4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define SPLIT_HAND_PIN D2 //fix pin. HIGH is left, LOW is right
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/takashiski/otaku_split/rev1/info.json b/keyboards/takashiski/otaku_split/rev1/info.json
index 42c66376ec..5bdf4048a7 100644
--- a/keyboards/takashiski/otaku_split/rev1/info.json
+++ b/keyboards/takashiski/otaku_split/rev1/info.json
@@ -8,8 +8,19 @@
         "pid": "0x0000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+        "rows": ["C6", "D7", "E6", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
-        "soft_serial_pin": "D0"
+        "soft_serial_pin": "D0",
+        "matrix_pins": {
+            "right": {
+                "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
+                "rows": ["B5", "B4", "E6", "D7", "C6"]
+            }
+        }
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",