Merge remote-tracking branch 'upstream/develop'

31 files changed, 58 insertions, 551 deletions

diff --git a/keyboards/takashicompany/center_enter/config.h b/keyboards/takashicompany/center_enter/config.h
index aa675c32ad..f77a42f59f 100644
--- a/keyboards/takashicompany/center_enter/config.h
+++ b/keyboards/takashicompany/center_enter/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 3
-#define MATRIX_COLS 12
 
 /*
  * Keyboard Matrix Assignments
@@ -39,25 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODER_RESOLUTION 1
-#define ENCODERS_PAD_A { D2 }
-#define ENCODERS_PAD_B { D1 }
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 6
@@ -75,51 +51,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -135,7 +73,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/takashicompany/center_enter/info.json b/keyboards/takashicompany/center_enter/info.json
index c9ecdb67ec..7c268e3f63 100644
--- a/keyboards/takashicompany/center_enter/info.json
+++ b/keyboards/takashicompany/center_enter/info.json
@@ -8,6 +8,13 @@
         "pid": "0x0012",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D2", "pin_b": "D1", "resolution": 1}
+        ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/takashicompany/center_enter/rules.mk b/keyboards/takashicompany/center_enter/rules.mk
index 43d5350abb..916e9f9934 100644
--- a/keyboards/takashicompany/center_enter/rules.mk
+++ b/keyboards/takashicompany/center_enter/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/takashicompany/compacx/config.h b/keyboards/takashicompany/compacx/config.h
index 10c70e472b..3f6f011524 100644
--- a/keyboards/takashicompany/compacx/config.h
+++ b/keyboards/takashicompany/compacx/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5 * 2
-#define MATRIX_COLS 7
 
 /*
  * Keyboard Matrix Assignments
@@ -39,25 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODER_RESOLUTION 4
-#define ENCODERS_PAD_A { E6, B6 }
-#define ENCODERS_PAD_B { B4, B5 }
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D2  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 12
@@ -79,43 +55,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -131,7 +75,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/takashicompany/compacx/info.json b/keyboards/takashicompany/compacx/info.json
index 7690d3c333..bcd4489a98 100644
--- a/keyboards/takashicompany/compacx/info.json
+++ b/keyboards/takashicompany/compacx/info.json
@@ -8,6 +8,17 @@
         "pid": "0x0014",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "E6", "pin_b": "B4"},
+            {"pin_a": "B6", "pin_b": "B5"}
+        ]
+    },
+    "split": {
+        "soft_serial_pin": "D2"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/takashicompany/compacx/rules.mk b/keyboards/takashicompany/compacx/rules.mk
index 52deaa5d04..8e0e5ffd1a 100644
--- a/keyboards/takashicompany/compacx/rules.mk
+++ b/keyboards/takashicompany/compacx/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/takashicompany/dogtag/config.h b/keyboards/takashicompany/dogtag/config.h
index adcf8d7321..4048cb9bf6 100644
--- a/keyboards/takashicompany/dogtag/config.h
+++ b/keyboards/takashicompany/dogtag/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 5
 
 /*
  * Keyboard Matrix Assignments
@@ -42,25 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODER_RESOLUTION 4
-#define ENCODERS_PAD_A { D4 }
-#define ENCODERS_PAD_B { C6 }
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 4 * 2
@@ -82,43 +58,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -134,7 +78,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/takashicompany/dogtag/info.json b/keyboards/takashicompany/dogtag/info.json
index b9f82c26cb..caa007fcc5 100644
--- a/keyboards/takashicompany/dogtag/info.json
+++ b/keyboards/takashicompany/dogtag/info.json
@@ -8,6 +8,16 @@
         "pid": "0x0018",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D4", "pin_b": "C6"}
+        ]
+    },
+    "split": {
+        "soft_serial_pin": "D2"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/takashicompany/dogtag/rules.mk b/keyboards/takashicompany/dogtag/rules.mk
index 08b1ffe09c..f4556ff1c6 100644
--- a/keyboards/takashicompany/dogtag/rules.mk
+++ b/keyboards/takashicompany/dogtag/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/takashicompany/endzone34/config.h b/keyboards/takashicompany/endzone34/config.h
index f74b828516..8dd55ecf0d 100644
--- a/keyboards/takashicompany/endzone34/config.h
+++ b/keyboards/takashicompany/endzone34/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 10
 
 /*
  * Keyboard Matrix Assignments
@@ -39,21 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
     #define RGBLED_NUM 9
@@ -73,51 +53,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_RGB_TEST
 #define RGBLIGHT_EFFECT_ALTERNATING
 #define RGBLIGHT_EFFECT_TWINKLE
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -133,7 +75,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/takashicompany/endzone34/info.json b/keyboards/takashicompany/endzone34/info.json
index 2284f7a3b4..60ca453e13 100644
--- a/keyboards/takashicompany/endzone34/info.json
+++ b/keyboards/takashicompany/endzone34/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0006",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/takashicompany/endzone34/rules.mk b/keyboards/takashicompany/endzone34/rules.mk
index 653c8343e7..f8fbdec9bd 100644
--- a/keyboards/takashicompany/endzone34/rules.mk
+++ b/keyboards/takashicompany/endzone34/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/takashicompany/heavy_left/config.h b/keyboards/takashicompany/heavy_left/config.h
index fa31dccb90..5bdc664832 100644
--- a/keyboards/takashicompany/heavy_left/config.h
+++ b/keyboards/takashicompany/heavy_left/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 5 * 2
-#define MATRIX_COLS 10
 
 /*
  * Keyboard Matrix Assignments
@@ -39,21 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D2  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 6 * 2
@@ -75,43 +55,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -128,8 +76,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
 #define EE_HANDS
diff --git a/keyboards/takashicompany/heavy_left/info.json b/keyboards/takashicompany/heavy_left/info.json
index 6f04de1738..2fa8ac7a05 100644
--- a/keyboards/takashicompany/heavy_left/info.json
+++ b/keyboards/takashicompany/heavy_left/info.json
@@ -8,6 +8,11 @@
         "pid": "0x0015",
         "device_version": "0.0.1"
     },
+    "split": {
+        "soft_serial_pin": "D2"
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/takashicompany/heavy_left/keymaps/takashicompany/keymap.c b/keyboards/takashicompany/heavy_left/keymaps/takashicompany/keymap.c
index c8391bff21..5e5fef6456 100644
--- a/keyboards/takashicompany/heavy_left/keymaps/takashicompany/keymap.c
+++ b/keyboards/takashicompany/heavy_left/keymaps/takashicompany/keymap.c
@@ -18,7 +18,7 @@
 
 // Defines the keycodes used by our macros in process_record_user
 enum custom_keycodes {
-    KC_00 = USER00,
+    KC_00 = QK_KB_0,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
diff --git a/keyboards/takashicompany/heavy_left/keymaps/via/keymap.c b/keyboards/takashicompany/heavy_left/keymaps/via/keymap.c
index ef86c4b0b7..eb523ebe50 100644
--- a/keyboards/takashicompany/heavy_left/keymaps/via/keymap.c
+++ b/keyboards/takashicompany/heavy_left/keymaps/via/keymap.c
@@ -18,7 +18,7 @@
 
 // Defines the keycodes used by our macros in process_record_user
 enum custom_keycodes {
-    KC_00 = USER00,
+    KC_00 = QK_KB_0,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
diff --git a/keyboards/takashicompany/heavy_left/rules.mk b/keyboards/takashicompany/heavy_left/rules.mk
index ce3c5bfaeb..2bccd4af0c 100644
--- a/keyboards/takashicompany/heavy_left/rules.mk
+++ b/keyboards/takashicompany/heavy_left/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/takashicompany/minizone/config.h b/keyboards/takashicompany/minizone/config.h
index 0c8def659f..4cd3ae6b65 100644
--- a/keyboards/takashicompany/minizone/config.h
+++ b/keyboards/takashicompany/minizone/config.h
@@ -3,11 +3,6 @@
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 6
-#define MATRIX_COLS 7
 
 /*
  * Keyboard Matrix Assignments
@@ -25,21 +20,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 11
@@ -57,51 +37,13 @@
 #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
 //#    define RGBLIGHT_EFFECT_RGB_TEST
 //#    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -117,7 +59,3 @@
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/takashicompany/minizone/info.json b/keyboards/takashicompany/minizone/info.json
index 51fb57276c..882a8ebdd5 100644
--- a/keyboards/takashicompany/minizone/info.json
+++ b/keyboards/takashicompany/minizone/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0021",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/takashicompany/minizone/rules.mk b/keyboards/takashicompany/minizone/rules.mk
index c7cf213756..60c7bb59b5 100644
--- a/keyboards/takashicompany/minizone/rules.mk
+++ b/keyboards/takashicompany/minizone/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/takashicompany/qoolee/config.h b/keyboards/takashicompany/qoolee/config.h
index f71e3de280..726f4507c8 100644
--- a/keyboards/takashicompany/qoolee/config.h
+++ b/keyboards/takashicompany/qoolee/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 3
-#define MATRIX_COLS 12
 
 /*
  * Keyboard Matrix Assignments
@@ -39,25 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-#define ENCODER_RESOLUTION 1
-#define ENCODERS_PAD_A { D2 }
-#define ENCODERS_PAD_B { D1 }
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
-
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 6
@@ -75,51 +51,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGBLIGHT_EFFECT_STATIC_GRADIENT
 #    define RGBLIGHT_EFFECT_RGB_TEST
 #    define RGBLIGHT_EFFECT_ALTERNATING
-/*== customize breathing effect ==*/
-/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-/*==== use exp() and sin() ====*/
-//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -135,7 +73,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/takashicompany/qoolee/info.json b/keyboards/takashicompany/qoolee/info.json
index 89335351ce..6f92e86c88 100644
--- a/keyboards/takashicompany/qoolee/info.json
+++ b/keyboards/takashicompany/qoolee/info.json
@@ -8,6 +8,13 @@
         "pid": "0x0013",
         "device_version": "0.0.1"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D2", "pin_b": "D1", "resolution": 1}
+        ]
+    },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/takashicompany/qoolee/rules.mk b/keyboards/takashicompany/qoolee/rules.mk
index 2b0013386e..0aa58dc861 100644
--- a/keyboards/takashicompany/qoolee/rules.mk
+++ b/keyboards/takashicompany/qoolee/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/takashicompany/radialex/config.h b/keyboards/takashicompany/radialex/config.h
index 468a850f4b..8843ff81f0 100644
--- a/keyboards/takashicompany/radialex/config.h
+++ b/keyboards/takashicompany/radialex/config.h
@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "config_common.h"
-
-/* key matrix size */
-#define MATRIX_ROWS 7
-#define MATRIX_COLS 7
 
 /*
  * Keyboard Matrix Assignments
@@ -39,16 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-//#define LED_NUM_LOCK_PIN B0
-//#define LED_CAPS_LOCK_PIN B1
-//#define LED_SCROLL_LOCK_PIN B2
-//#define LED_COMPOSE_PIN B3
-//#define LED_KANA_PIN B4
-
-//#define BACKLIGHT_PIN B7
-//#define BACKLIGHT_LEVELS 3
-//#define BACKLIGHT_BREATHING
-
 #define RGB_DI_PIN D3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 12
@@ -69,43 +54,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_EFFECT_TWINKLE
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -121,7 +74,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/takashicompany/radialex/info.json b/keyboards/takashicompany/radialex/info.json
index 8aff0b5ab8..1ed37283e7 100644
--- a/keyboards/takashicompany/radialex/info.json
+++ b/keyboards/takashicompany/radialex/info.json
@@ -8,6 +8,8 @@
         "pid": "0x0019",
         "device_version": "0.0.1"
     },
+    "processor": "atmega32u4",
+    "bootloader": "caterina",
     "layouts": {
         "LAYOUT": {
             "layout": [
diff --git a/keyboards/takashicompany/radialex/keymaps/via/keymap.c b/keyboards/takashicompany/radialex/keymaps/via/keymap.c
index de23d306eb..5ce5ccccdf 100644
--- a/keyboards/takashicompany/radialex/keymaps/via/keymap.c
+++ b/keyboards/takashicompany/radialex/keymaps/via/keymap.c
@@ -15,7 +15,7 @@
  */
 #include QMK_KEYBOARD_H
 
-#define RADIALEX USER00
+#define RADIALEX QK_KB_0
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
diff --git a/keyboards/takashicompany/radialex/rules.mk b/keyboards/takashicompany/radialex/rules.mk
index d990e8cae3..7800cd8075 100644
--- a/keyboards/takashicompany/radialex/rules.mk
+++ b/keyboards/takashicompany/radialex/rules.mk
@@ -1,9 +1,3 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = caterina
-
 # Build Options
 #   change yes to no to disable
 #
diff --git a/keyboards/takashicompany/spreadwriter/config.h b/keyboards/takashicompany/spreadwriter/config.h
deleted file mode 100644
index e22f102dc1..0000000000
--- a/keyboards/takashicompany/spreadwriter/config.h
+++ /dev/null
@@ -1,10 +0,0 @@
-// Copyright 2022 takashicompany (@takashicompany)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-#include "config_common.h"
-
-#define ENCODER_RESOLUTION 4
-#define ENCODERS_PAD_A { D1 }
-#define ENCODERS_PAD_B { D0 }
diff --git a/keyboards/takashicompany/spreadwriter/info.json b/keyboards/takashicompany/spreadwriter/info.json
index 86f250966a..16450db96e 100644
--- a/keyboards/takashicompany/spreadwriter/info.json
+++ b/keyboards/takashicompany/spreadwriter/info.json
@@ -40,6 +40,11 @@
         "pid": "0x0023",
         "vid": "0x7463"
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "D1", "pin_b": "D0"}
+        ]
+    },
     "rgblight": {
         "led_count": 53,
         "pin": "D3",
diff --git a/keyboards/takashicompany/spreadwriter/keymaps/via/config.h b/keyboards/takashicompany/spreadwriter/keymaps/via/config.h
index adbbc6ce83..9587fd7b6b 100644
--- a/keyboards/takashicompany/spreadwriter/keymaps/via/config.h
+++ b/keyboards/takashicompany/spreadwriter/keymaps/via/config.h
@@ -12,9 +12,6 @@
 // when turn knob clockwise or counterclockwise.
 // This is handy to assign key codes by VIA.
 
-// Number of endoder
-#define ENCODERS 1
-
 // Mappings of encoder rotation to key position in key matrix.
 #define ENCODERS_CW_KEY  { { 0, 4 }}
 #define ENCODERS_CCW_KEY { { 6, 0 }}
\ No newline at end of file
diff --git a/keyboards/takashicompany/spreadwriter/keymaps/via/keymap.c b/keyboards/takashicompany/spreadwriter/keymaps/via/keymap.c
index 7d9a5cebf9..e04c1fea0d 100644
--- a/keyboards/takashicompany/spreadwriter/keymaps/via/keymap.c
+++ b/keyboards/takashicompany/spreadwriter/keymaps/via/keymap.c
@@ -88,12 +88,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 //------------------------------------------------------------------------------
 // Rotary Encoder
 //------------------------------------------------------------------------------
-static uint8_t  encoder_state[ENCODERS] = {0};
-static keypos_t encoder_cw[ENCODERS]    = ENCODERS_CW_KEY;
-static keypos_t encoder_ccw[ENCODERS]   = ENCODERS_CCW_KEY;
+static uint8_t  encoder_state[NUM_ENCODERS] = {0};
+static keypos_t encoder_cw[NUM_ENCODERS]    = ENCODERS_CW_KEY;
+static keypos_t encoder_ccw[NUM_ENCODERS]   = ENCODERS_CCW_KEY;
 
 void encoder_action_unregister(void) {
-    for (int index = 0; index < ENCODERS; ++index) {
+    for (int index = 0; index < NUM_ENCODERS; ++index) {
         if (encoder_state[index]) {
             keyevent_t encoder_event = (keyevent_t) {
                 .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],