Merge remote-tracking branch 'origin/master' into develop

1 files changed, 86 insertions, 0 deletions

diff --git a/keyboards/synthlabs/060/config.h b/keyboards/synthlabs/060/config.h
new file mode 100644
index 0000000000..1f3c29a377
--- /dev/null
+++ b/keyboards/synthlabs/060/config.h
@@ -0,0 +1,86 @@
+// Copyright 2022 Aaron Hong (@hongaaronc)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* Backlighting */
+#define RGB_MATRIX_LED_COUNT 63
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+
+#define RGB_DI_PIN E6
+
+// RGB Matrix Animation modes
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+#define ENABLE_RGB_MATRIX_BAND_SAT
+#define ENABLE_RGB_MATRIX_BAND_VAL
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_RAINDROPS
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define ENABLE_RGB_MATRIX_HUE_BREATHING
+#define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#define ENABLE_RGB_MATRIX_HUE_WAVE
+#define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// Enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// Enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#define ENABLE_RGB_MATRIX_SPLASH
+#define ENABLE_RGB_MATRIX_MULTISPLASH
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+// Disabled due to firmware size constraints
+// Can be enabled in exchange for some other effects
+#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#undef ENABLE_RGB_MATRIX_DUAL_BEACON
+#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+#define FORCE_NKRO