Move matrix config to info.json, part 3 (#19991)

Co-authored-by: Nick Brassel <nick@tzarc.org>

12 files changed, 37 insertions, 120 deletions

diff --git a/keyboards/recompile_keys/choco60/rev1/config.h b/keyboards/recompile_keys/choco60/rev1/config.h
index 20fefc2180..ba9e3a474e 100644
--- a/keyboards/recompile_keys/choco60/rev1/config.h
+++ b/keyboards/recompile_keys/choco60/rev1/config.h
@@ -17,20 +17,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define SPLIT_HAND_PIN D0
diff --git a/keyboards/recompile_keys/choco60/rev1/info.json b/keyboards/recompile_keys/choco60/rev1/info.json
index 81738c4d47..3960f575ab 100644
--- a/keyboards/recompile_keys/choco60/rev1/info.json
+++ b/keyboards/recompile_keys/choco60/rev1/info.json
@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6", "D1"],
+        "rows": ["C6", "D7", "E6", "B4", "B5"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D3"
     },
diff --git a/keyboards/recompile_keys/choco60/rev2/config.h b/keyboards/recompile_keys/choco60/rev2/config.h
index 0540d16151..e081d748ce 100644
--- a/keyboards/recompile_keys/choco60/rev2/config.h
+++ b/keyboards/recompile_keys/choco60/rev2/config.h
@@ -17,25 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { C5, C4, B6, B7, C7 }
-#define MATRIX_ROW_PINS_RIGHT { D3, D2, D5, D6, B0 }
-/* The last three NO_PIN are dummies to make the same size as MATRIX_ROW_PINS_RIGHT. */
-#define MATRIX_COL_PINS { C6, B4, B3, B2, B1, B0, NO_PIN, NO_PIN, NO_PIN }
-#define MATRIX_COL_PINS_RIGHT { C7, B7, B6, B5, B4, B3, B2, C6, D4 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define SPLIT_HAND_PIN D1
 
 #define SPLIT_USB_DETECT
diff --git a/keyboards/recompile_keys/choco60/rev2/info.json b/keyboards/recompile_keys/choco60/rev2/info.json
index a768c060db..c03e8678f6 100644
--- a/keyboards/recompile_keys/choco60/rev2/info.json
+++ b/keyboards/recompile_keys/choco60/rev2/info.json
@@ -1,6 +1,17 @@
 {
+    "matrix_pins": {
+        "cols": ["C6", "B4", "B3", "B2", "B1", "B0", null, null, null],
+        "rows": ["C5", "C4", "B6", "B7", "C7"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
-        "soft_serial_pin": "D0"
+        "soft_serial_pin": "D0",
+        "matrix_pins": {
+            "right": {
+                "cols": ["C7", "B7", "B6", "B5", "B4", "B3", "B2", "C6", "D4"],
+                "rows": ["D3", "D2", "D5", "D6", "B0"]
+            }
+        }
     },
     "processor": "atmega32u2",
     "bootloader": "atmel-dfu"
diff --git a/keyboards/recompile_keys/cocoa40/config.h b/keyboards/recompile_keys/cocoa40/config.h
index 5a62dae4f8..976a698c5d 100644
--- a/keyboards/recompile_keys/cocoa40/config.h
+++ b/keyboards/recompile_keys/cocoa40/config.h
@@ -17,21 +17,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
-#define MATRIX_COL_PINS { B5, B4, E6, D7, C6, D4, D0, D1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 #define SPLIT_HAND_PIN D3
diff --git a/keyboards/recompile_keys/cocoa40/info.json b/keyboards/recompile_keys/cocoa40/info.json
index 4de66d2aea..b72f109cf6 100644
--- a/keyboards/recompile_keys/cocoa40/info.json
+++ b/keyboards/recompile_keys/cocoa40/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4000",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["B5", "B4", "E6", "D7", "C6", "D4", "D0", "D1"],
+        "rows": ["F4", "F5", "F6", "F7"]
+    },
+    "diode_direction": "COL2ROW",
     "split": {
         "soft_serial_pin": "D2"
     },
diff --git a/keyboards/recompile_keys/mio/config.h b/keyboards/recompile_keys/mio/config.h
index 9ecc3fd593..9403ff760d 100644
--- a/keyboards/recompile_keys/mio/config.h
+++ b/keyboards/recompile_keys/mio/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { F1, F0, F4, F7, F6, F5 }
-#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4}
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 #define RGB_DI_PIN B3
 #ifdef RGB_DI_PIN
 #    define RGBLED_NUM 8
diff --git a/keyboards/recompile_keys/mio/info.json b/keyboards/recompile_keys/mio/info.json
index 7523573159..c2647c081a 100644
--- a/keyboards/recompile_keys/mio/info.json
+++ b/keyboards/recompile_keys/mio/info.json
@@ -8,6 +8,11 @@
     "pid": "0x4D41",
     "device_version": "0.0.1"
   },
+  "matrix_pins": {
+    "cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
+    "rows": ["F1", "F0", "F4", "F7", "F6", "F5"]
+  },
+  "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
   "layouts": {
diff --git a/keyboards/recompile_keys/nomu30/rev1/config.h b/keyboards/recompile_keys/nomu30/rev1/config.h
deleted file mode 100644
index e9ef483924..0000000000
--- a/keyboards/recompile_keys/nomu30/rev1/config.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
-Copyright 2019 Naoto Takai
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D1, D0, D4 }
-#define MATRIX_COL_PINS { C6, D7, E6, B4, F4, F5, F6, F7, B1, B3, B2, B6 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/recompile_keys/nomu30/rev1/info.json b/keyboards/recompile_keys/nomu30/rev1/info.json
index 4369a04103..815f200cd8 100644
--- a/keyboards/recompile_keys/nomu30/rev1/info.json
+++ b/keyboards/recompile_keys/nomu30/rev1/info.json
@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["C6", "D7", "E6", "B4", "F4", "F5", "F6", "F7", "B1", "B3", "B2", "B6"],
+        "rows": ["D1", "D0", "D4"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "caterina"
 }
diff --git a/keyboards/recompile_keys/nomu30/rev2/config.h b/keyboards/recompile_keys/nomu30/rev2/config.h
index ef4d48e163..ff4630d838 100644
--- a/keyboards/recompile_keys/nomu30/rev2/config.h
+++ b/keyboards/recompile_keys/nomu30/rev2/config.h
@@ -17,22 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B2, B1, B0 }
-#define MATRIX_COL_PINS { C4, C5, C6, C7, B7, B6, B5, B4, B3, D5, D4, D3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/recompile_keys/nomu30/rev2/info.json b/keyboards/recompile_keys/nomu30/rev2/info.json
index dd190d18ee..70730415a5 100644
--- a/keyboards/recompile_keys/nomu30/rev2/info.json
+++ b/keyboards/recompile_keys/nomu30/rev2/info.json
@@ -1,4 +1,9 @@
 {
+    "matrix_pins": {
+        "cols": ["C4", "C5", "C6", "C7", "B7", "B6", "B5", "B4", "B3", "D5", "D4", "D3"],
+        "rows": ["B2", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u2",
     "bootloader": "atmel-dfu"
 }