Merge remote-tracking branch 'origin/master' into develop

8 files changed, 446 insertions, 0 deletions

diff --git a/keyboards/pluckey/config.h b/keyboards/pluckey/config.h
new file mode 100644
index 0000000000..295fe93a85
--- /dev/null
+++ b/keyboards/pluckey/config.h
@@ -0,0 +1,90 @@
+/*
+Copyright 2021 floookay
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xF100
+#define PRODUCT_ID   0x91CE
+#define DEVICE_VER   0x0001
+#define MANUFACTURER floookay
+#define PRODUCT      pluckey
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B4, F5, F6, B6, B5 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, F7 }
+#define UNUSED_PINS { F4, B1 }
+#define DIODE_DIRECTION COL2ROW
+
+/* encoder support */
+#define ENCODERS_PAD_A { B3 }
+#define ENCODERS_PAD_B { B2 }
+#define ENCODER_RESOLUTION 2
+#define ENCODERS_PAD_A_RIGHT { B2 }
+#define ENCODERS_PAD_B_RIGHT { B3 }
+#define ENCODER_RESOLUTION_RIGHT 2
+
+/* communication between sides */
+#define USE_SERIAL
+#define SOFT_SERIAL_PIN D2
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/pluckey/info.json b/keyboards/pluckey/info.json
new file mode 100644
index 0000000000..0a6bd1832d
--- /dev/null
+++ b/keyboards/pluckey/info.json
@@ -0,0 +1,149 @@
+{
+    "keyboard_name": "pluckey",
+    "url": "https://github.com/floookay/pluckey",
+    "maintainer": "floookay",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":3.5, "y":0},
+                {"x":15, "y":0},
+                {"x":2.5, "y":0.125},
+                {"x":4.5, "y":0.125},
+                {"x":14, "y":0.125},
+                {"x":16, "y":0.125},
+                {"x":5.5, "y":0.25},
+                {"x":6.5, "y":0.25},
+                {"x":12, "y":0.25},
+                {"x":13, "y":0.25},
+                {"x":0, "y":0.625, "w":1.5},
+                {"x":1.5, "y":0.625},
+                {"x":17, "y":0.625},
+                {"x":18, "y":0.625, "w":1.5},
+                {"x":3.5, "y":1.0},
+                {"x":15, "y":1.0},
+                {"x":2.5, "y":1.125},
+                {"x":4.5, "y":1.125},
+                {"x":14, "y":1.125},
+                {"x":16, "y":1.125},
+                {"x":5.5, "y":1.25},
+                {"x":6.5, "y":1.25},
+                {"x":12, "y":1.25},
+                {"x":13, "y":1.25},
+                {"x":0, "y":1.625, "w":1.5},
+                {"x":1.5, "y":1.625},
+                {"x":17, "y":1.625},
+                {"x":18, "y":1.625, "w":1.5},
+                {"x":3.5, "y":2},
+                {"x":15, "y":2},
+                {"x":2.5, "y":2.125},
+                {"x":4.5, "y":2.125},
+                {"x":14, "y":2.125},
+                {"x":16, "y":2.125},
+                {"x":5.5, "y":2.25},
+                {"x":6.5, "y":2.25},
+                {"x":12, "y":2.25},
+                {"x":13, "y":2.25},
+                {"x":0, "y":2.625, "w":1.5},
+                {"x":1.5, "y":2.625},
+                {"x":17, "y":2.625},
+                {"x":18, "y":2.625, "w":1.5},
+                {"x":6.5, "y":3.25},
+                {"x":12, "y":3.25},
+                {"x":3.5, "y":3},
+                {"x":15, "y":3},
+                {"x":2.5, "y":3.125},
+                {"x":4.5, "y":3.125},
+                {"x":14, "y":3.125},
+                {"x":16, "y":3.125},
+                {"x":5.5, "y":3.25},
+                {"x":13, "y":3.25},
+                {"x":0, "y":3.625, "w":1.5},
+                {"x":1.5, "y":3.625},
+                {"x":17, "y":3.625},
+                {"x":18, "y":3.625, "w":1.5},
+                {"x":7.5, "y":3.75},
+                {"x":11, "y":3.75},
+                {"x":3.5, "y":4},
+                {"x":15, "y":4},
+                {"x":2.5, "y":4.125},
+                {"x":4.5, "y":4.125},
+                {"x":14, "y":4.125},
+                {"x":16, "y":4.125},
+                {"x":5.75, "y":4.5, "w":1.5},
+                {"x":12.25, "y":4.5, "w":1.5},
+                {"x":7.25, "y":4.75},
+                {"x":11.25, "y":4.75}
+            ]
+        },
+        "LAYOUT_ergo": {
+            "layout": [
+                {"x":3.5, "y":0},
+                {"x":15, "y":0},
+                {"x":2.5, "y":0.125},
+                {"x":4.5, "y":0.125},
+                {"x":14, "y":0.125},
+                {"x":16, "y":0.125},
+                {"x":5.5, "y":0.25},
+                {"x":6.5, "y":0.25},
+                {"x":12, "y":0.25},
+                {"x":13, "y":0.25},
+                {"x":0, "y":0.625, "w":1.5},
+                {"x":1.5, "y":0.625},
+                {"x":17, "y":0.625},
+                {"x":18, "y":0.625, "w":1.5},
+                {"x":3.5, "y":1.0},
+                {"x":15, "y":1.0},
+                {"x":2.5, "y":1.125},
+                {"x":4.5, "y":1.125},
+                {"x":14, "y":1.125},
+                {"x":16, "y":1.125},
+                {"x":5.5, "y":1.25},
+                {"x":6.5, "y":1.25, "h":1.5},
+                {"x":12, "y":1.25, "h":1.5},
+                {"x":13, "y":1.25},
+                {"x":0, "y":1.625, "w":1.5},
+                {"x":1.5, "y":1.625},
+                {"x":17, "y":1.625},
+                {"x":18, "y":1.625, "w":1.5},
+                {"x":3.5, "y":2},
+                {"x":15, "y":2},
+                {"x":2.5, "y":2.125},
+                {"x":4.5, "y":2.125},
+                {"x":14, "y":2.125},
+                {"x":16, "y":2.125},
+                {"x":5.5, "y":2.25},
+                {"x":13, "y":2.25},
+                {"x":0, "y":2.625, "w":1.5},
+                {"x":1.5, "y":2.625},
+                {"x":17, "y":2.625},
+                {"x":18, "y":2.625, "w":1.5},
+                {"x":6.5, "y":2.75, "h":1.5},
+                {"x":12, "y":2.75, "h":1.5},
+                {"x":3.5, "y":3},
+                {"x":15, "y":3},
+                {"x":2.5, "y":3.125},
+                {"x":4.5, "y":3.125},
+                {"x":14, "y":3.125},
+                {"x":16, "y":3.125},
+                {"x":5.5, "y":3.25},
+                {"x":13, "y":3.25},
+                {"x":0, "y":3.625, "w":1.5},
+                {"x":1.5, "y":3.625},
+                {"x":17, "y":3.625},
+                {"x":18, "y":3.625, "w":1.5},
+                {"x":7.5, "y":3.75},
+                {"x":11, "y":3.75},
+                {"x":3.5, "y":4},
+                {"x":15, "y":4},
+                {"x":2.5, "y":4.125},
+                {"x":4.5, "y":4.125},
+                {"x":14, "y":4.125},
+                {"x":16, "y":4.125},
+                {"x":5.75, "y":4.5, "w":1.5},
+                {"x":12.25, "y":4.5, "w":1.5},
+                {"x":7.25, "y":4.75},
+                {"x":11.25, "y":4.75}
+            ]
+        }
+    }
+}
diff --git a/keyboards/pluckey/keymaps/default/keymap.c b/keyboards/pluckey/keymaps/default/keymap.c
new file mode 100644
index 0000000000..31042fc692
--- /dev/null
+++ b/keyboards/pluckey/keymaps/default/keymap.c
@@ -0,0 +1,77 @@
+/* Copyright 2021 floookay
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _LOWER,
+    _RAISE,
+    _ADJUST
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    M_ARROW
+};
+
+#define MO_LOW MO(_LOWER)
+#define MO_RAIS MO(_RAISE)
+#define MO_ADJU MO(_ADJUST)
+#define MO_CURR _______
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS,                        KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_GRV,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC,                        KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_LPRN,                        KC_RPRN, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LCBR, KC_HOME,      KC_END,  KC_RCBR, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                          KC_LGUI, KC_LALT, MO_LOW,      KC_SPC,    KC_BSPC,            KC_ENT,    KC_SPC,      MO_RAIS, KC_RALT, KC_MEH
+    ),
+    [_LOWER] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F11,                         KC_F12,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_PSCR,
+        _______, _______, _______, _______, KC_PIPE, KC_UNDS, KC_LPRN,                        KC_RPRN, KC_PLUS, KC_PIPE, _______, _______, _______, _______,
+        _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_LPRN,                        KC_RPRN, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+        _______, _______, _______, _______, _______, _______, M_ARROW, KC_PGUP,      KC_PGDN, _______, _______, _______, _______, _______, _______, _______,
+                          _______, _______, MO_CURR,     _______,   KC_DEL,             _______,   _______,     MO_ADJU, _______, _______
+    ),
+    [_RAISE] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______,                        _______, _______, _______, KC_PGUP, _______, _______, _______,
+        _______, _______, _______, KC_VOLU, _______, _______, KC_LPRN,                        KC_RPRN, _______, KC_BTN4, KC_UP,   KC_BTN5, _______, _______,
+        _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_LPRN,                        KC_RPRN, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  _______,
+        _______, _______, _______, KC_VOLD, _______, _______, M_ARROW, KC_PGUP,      KC_PGDN, _______, _______, _______, KC_PGDN, _______, _______, _______,
+                          _______, _______, MO_ADJU,     _______,   KC_DEL,             _______,   _______,     MO_CURR, _______, _______
+    ),
+    [_ADJUST] = LAYOUT(
+        KC_SLEP, _______, _______, _______, _______, _______, _______,                        _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                        _______, _______, _______, KC_WH_U, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______,                        _______, _______, KC_WH_L, KC_WH_D, KC_WH_R, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______, _______, _______, _______,
+                          _______, _______, _______,     _______,   KC_CLR,            _______,   _______,     _______, _______, _______
+    )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case M_ARROW:
+            if (record->event.pressed) {
+                SEND_STRING("->");
+            }
+            break;
+    }
+    return true;
+}
diff --git a/keyboards/pluckey/keymaps/default/readme.md b/keyboards/pluckey/keymaps/default/readme.md
new file mode 100644
index 0000000000..d94d03e588
--- /dev/null
+++ b/keyboards/pluckey/keymaps/default/readme.md
@@ -0,0 +1,4 @@
+# Default keymap
+
+![keymap](https://gist.githubusercontent.com/floookay/ea7313862e407c9b5aaea3d6ed3ce233/raw/0a37fe682f76bbaa55cbc56527e4666bedbf5761/layout.png)  
+[Keyboard-Layout-Editor](http://www.keyboard-layout-editor.com/#/gists/13c9d00bd0c0c9e3fe3b3d8d98672ef9) [(raw)](https://gist.github.com/floookay/13c9d00bd0c0c9e3fe3b3d8d98672ef9)
diff --git a/keyboards/pluckey/pluckey.c b/keyboards/pluckey/pluckey.c
new file mode 100644
index 0000000000..d9025726fd
--- /dev/null
+++ b/keyboards/pluckey/pluckey.c
@@ -0,0 +1,38 @@
+/* Copyright 2021 floookay
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "pluckey.h"
+
+#ifdef ENCODER_ENABLE
+bool encoder_update_kb(uint8_t index, bool clockwise) {
+    if (!encoder_update_user(index, clockwise)) { return false; }
+    if (index == 0) {
+        if (clockwise) {
+            tap_code_delay(KC_VOLU, 10);
+        } else {
+            tap_code_delay(KC_VOLD, 10);
+        }
+    }
+    else if (index == 1) {
+        if (clockwise) {
+            tap_code(KC_WH_U);
+        } else {
+            tap_code(KC_WH_D);
+        }
+    }
+    return true;
+}
+#endif
diff --git a/keyboards/pluckey/pluckey.h b/keyboards/pluckey/pluckey.h
new file mode 100644
index 0000000000..628a89baa9
--- /dev/null
+++ b/keyboards/pluckey/pluckey.h
@@ -0,0 +1,46 @@
+/* Copyright 2021 floookay
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation,   either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    l00, l01, l02, l03, l04, l05, l06,               r00, r01, r02, r03, r04, r05, r06, \
+    l10, l11, l12, l13, l14, l15, l16,               r10, r11, r12, r13, r14, r15, r16, \
+    l20, l21, l22, l23, l24, l25, l26,               r20, r21, r22, r23, r24, r25, r26, \
+    l30, l31, l32, l33, l34, l35, l36, l41,     r45, r30, r31, r32, r33, r34, r35, r36, \
+              l42, l43, l44,   l45,   l46,       r40,   r41,   r42, r43, r44            \
+){ \
+    { l00,   l01,   l02,   l03,   l04,   l05,   l06 },   \
+    { l10,   l11,   l12,   l13,   l14,   l15,   l16 },   \
+    { l20,   l21,   l22,   l23,   l24,   l25,   l26 },   \
+    { l30,   l31,   l32,   l33,   l34,   l35,   l36 },   \
+    { KC_NO, l41,   l42,   l43,   l44,   l45,   l46 },   \
+    { r06,   r05,   r04,   r03,   r02,   r01,   r00 },   \
+    { r16,   r15,   r14,   r13,   r12,   r11,   r10 },   \
+    { r26,   r25,   r24,   r23,   r22,   r21,   r20 },   \
+    { r36,   r35,   r34,   r33,   r32,   r31,   r30 },   \
+    { KC_NO, r45,   r44,   r43,   r42,   r41,   r40 }  \
+}
diff --git a/keyboards/pluckey/readme.md b/keyboards/pluckey/readme.md
new file mode 100644
index 0000000000..b0a1af99b8
--- /dev/null
+++ b/keyboards/pluckey/readme.md
@@ -0,0 +1,19 @@
+# Pluckey
+
+![pluckey](https://gist.githubusercontent.com/floookay/ea7313862e407c9b5aaea3d6ed3ce233/raw/1757078b1adf7ac4d51d74f445107bdb46e013a3/sandwich%2520angle.jpg)
+
+The pluckey is an ergodox like split keyboard with moderate columnal stagger and a horizontal space key.
+
+* Keyboard Maintainer: [floookay](https://github.com/floookay)
+* Hardware Supported: pluckey pcbs with pro micro controllers
+* Hardware Availability: [pcb &amp; case files](https://github.com/floookay/pluckey)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make pluckey:default
+
+Flashing example for this keyboard:
+
+    make pluckey:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/pluckey/rules.mk b/keyboards/pluckey/rules.mk
new file mode 100644
index 0000000000..4f4954434b
--- /dev/null
+++ b/keyboards/pluckey/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes
+SPLIT_KEYBOARD = yes