diff options
author | Alex Ong <the.onga@gmail.com> | 2019-01-26 11:36:28 +1100 |
---|---|---|
committer | Alex Ong <the.onga@gmail.com> | 2019-01-26 11:36:28 +1100 |
commit | d977daa8dc9136746425f9e1414e1f93cb161877 (patch) | |
tree | 209ab8082580e5fdf37f1a8b7c1169250b7548c0 /keyboards/plain60/rules.mk | |
parent | 47c91fc7f75ae0a477e55b687aa0fc30da0a283c (diff) | |
parent | 0306e487e2cd6a77ad840d0a441b478747b7ccd0 (diff) |
Merge branch 'master' of https://github.com/qmk/qmk_firmware
Diffstat (limited to 'keyboards/plain60/rules.mk')
-rw-r--r-- | keyboards/plain60/rules.mk | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/keyboards/plain60/rules.mk b/keyboards/plain60/rules.mk new file mode 100644 index 0000000000..a1a0e9ca1c --- /dev/null +++ b/keyboards/plain60/rules.mk @@ -0,0 +1,66 @@ +SRC += keyboards/wilba_tech/wt_main.c +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RAW_ENABLE = yes +DYNAMIC_KEYMAP_ENABLE = yes |