Clean up Force NKRO in config.h (#19718)

6 files changed, 0 insertions, 126 deletions

diff --git a/keyboards/lucid/alexa/config.h b/keyboards/lucid/alexa/config.h
index a6851983ee..9bb5148174 100644
--- a/keyboards/lucid/alexa/config.h
+++ b/keyboards/lucid/alexa/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/alexa_solder/config.h b/keyboards/lucid/alexa_solder/config.h
index 498691fc0f..7957614830 100644
--- a/keyboards/lucid/alexa_solder/config.h
+++ b/keyboards/lucid/alexa_solder/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/kbd8x_hs/config.h b/keyboards/lucid/kbd8x_hs/config.h
index a845e4bd61..6a2e91b724 100644
--- a/keyboards/lucid/kbd8x_hs/config.h
+++ b/keyboards/lucid/kbd8x_hs/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/phantom_hs/config.h b/keyboards/lucid/phantom_hs/config.h
index aeb780e84d..5a43e7d43e 100644
--- a/keyboards/lucid/phantom_hs/config.h
+++ b/keyboards/lucid/phantom_hs/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/phantom_solder/config.h b/keyboards/lucid/phantom_solder/config.h
index 6e170f6bd5..84f21cefa0 100644
--- a/keyboards/lucid/phantom_solder/config.h
+++ b/keyboards/lucid/phantom_solder/config.h
@@ -57,27 +57,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */
diff --git a/keyboards/lucid/scarlet/config.h b/keyboards/lucid/scarlet/config.h
index 0e6eb08099..aa3d40da14 100644
--- a/keyboards/lucid/scarlet/config.h
+++ b/keyboards/lucid/scarlet/config.h
@@ -54,27 +54,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 /* Define less important options */
 
 /*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
  * Feature disable options
  * These options are also useful to firmware size reduction.
  */