Move matrix config to info.json, part 8 (#20030)

12 files changed, 30 insertions, 102 deletions

diff --git a/keyboards/kkatano/bakeneko60/config.h b/keyboards/kkatano/bakeneko60/config.h
index 49833d6b6d..6aac1d9a5e 100644
--- a/keyboards/kkatano/bakeneko60/config.h
+++ b/keyboards/kkatano/bakeneko60/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 }
-#define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/kkatano/bakeneko60/info.json b/keyboards/kkatano/bakeneko60/info.json
index e4335d1147..dfef4af7ae 100644
--- a/keyboards/kkatano/bakeneko60/info.json
+++ b/keyboards/kkatano/bakeneko60/info.json
@@ -8,6 +8,11 @@
         "pid": "0xCBDC",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F6", "B0", "F1", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1"],
+        "rows": ["E6", "B7", "F7", "F4", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["60_ansi_split_bs_rshift", "60_ansi", "60_tsangan_hhkb"],
diff --git a/keyboards/kkatano/bakeneko65/rev2/config.h b/keyboards/kkatano/bakeneko65/rev2/config.h
index 6263646091..6aac1d9a5e 100644
--- a/keyboards/kkatano/bakeneko65/rev2/config.h
+++ b/keyboards/kkatano/bakeneko65/rev2/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 }
-#define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/kkatano/bakeneko65/rev2/info.json b/keyboards/kkatano/bakeneko65/rev2/info.json
index 63cbf3ab7f..103efeef4e 100644
--- a/keyboards/kkatano/bakeneko65/rev2/info.json
+++ b/keyboards/kkatano/bakeneko65/rev2/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4C82",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F6", "B0", "F1", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"],
+        "rows": ["E6", "B7", "F7", "F4", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["65_ansi"],
diff --git a/keyboards/kkatano/bakeneko65/rev3/config.h b/keyboards/kkatano/bakeneko65/rev3/config.h
index 6263646091..6aac1d9a5e 100644
--- a/keyboards/kkatano/bakeneko65/rev3/config.h
+++ b/keyboards/kkatano/bakeneko65/rev3/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 }
-#define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 }
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/kkatano/bakeneko65/rev3/info.json b/keyboards/kkatano/bakeneko65/rev3/info.json
index ad74ae3e74..52bdc1a4e0 100644
--- a/keyboards/kkatano/bakeneko65/rev3/info.json
+++ b/keyboards/kkatano/bakeneko65/rev3/info.json
@@ -8,6 +8,11 @@
         "pid": "0x4C83",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F6", "B0", "F1", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2", "D1", "D0"],
+        "rows": ["E6", "B7", "F7", "F4", "F5"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "layouts": {
diff --git a/keyboards/kkatano/bakeneko80/config.h b/keyboards/kkatano/bakeneko80/config.h
index d13b5396c6..6aac1d9a5e 100644
--- a/keyboards/kkatano/bakeneko80/config.h
+++ b/keyboards/kkatano/bakeneko80/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { E6, B0, B1, B7, D1, D0 }
-#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/kkatano/bakeneko80/info.json b/keyboards/kkatano/bakeneko80/info.json
index 8cb125d309..6fdcd422cb 100644
--- a/keyboards/kkatano/bakeneko80/info.json
+++ b/keyboards/kkatano/bakeneko80/info.json
@@ -8,6 +8,11 @@
         "pid": "0x8DEF",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3", "D2"],
+        "rows": ["E6", "B0", "B1", "B7", "D1", "D0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["tkl_ansi"],
diff --git a/keyboards/kkatano/wallaby/config.h b/keyboards/kkatano/wallaby/config.h
index aecfcb1c13..6aac1d9a5e 100644
--- a/keyboards/kkatano/wallaby/config.h
+++ b/keyboards/kkatano/wallaby/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B5, B4, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { D5, C7, C6, D4, D0, E6, F0, F1, F4, F5, F6, F7, D7, D6, D1, D2, D3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/kkatano/wallaby/info.json b/keyboards/kkatano/wallaby/info.json
index b5ee4bd1ed..7372dcacb2 100644
--- a/keyboards/kkatano/wallaby/info.json
+++ b/keyboards/kkatano/wallaby/info.json
@@ -8,6 +8,11 @@
         "pid": "0x5967",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D5", "C7", "C6", "D4", "D0", "E6", "F0", "F1", "F4", "F5", "F6", "F7", "D7", "D6", "D1", "D2", "D3"],
+        "rows": ["B5", "B4", "B3", "B2", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "community_layouts": ["tkl_ansi"],
diff --git a/keyboards/kkatano/yurei/config.h b/keyboards/kkatano/yurei/config.h
index cd117f9c57..6954b38182 100644
--- a/keyboards/kkatano/yurei/config.h
+++ b/keyboards/kkatano/yurei/config.h
@@ -17,23 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-#define MATRIX_ROW_PINS { B5, B4, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { D5, C7, C6, D4, D0, E6, F0, F1, F4, F5, F6, F7, D7, D6, D1, D2, D3 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
diff --git a/keyboards/kkatano/yurei/info.json b/keyboards/kkatano/yurei/info.json
index b1efc63581..3f77786c89 100644
--- a/keyboards/kkatano/yurei/info.json
+++ b/keyboards/kkatano/yurei/info.json
@@ -8,6 +8,11 @@
         "pid": "0x5D5E",
         "device_version": "0.0.1"
     },
+    "matrix_pins": {
+        "cols": ["D5", "C7", "C6", "D4", "D0", "E6", "F0", "F1", "F4", "F5", "F6", "F7", "D7", "D6", "D1", "D2", "D3"],
+        "rows": ["B5", "B4", "B3", "B2", "B1", "B0"]
+    },
+    "diode_direction": "COL2ROW",
     "processor": "atmega32u4",
     "bootloader": "halfkay",
     "community_layouts": ["tkl_ansi"],