Merge remote-tracking branch 'upstream/master'

5 files changed, 637 insertions, 70 deletions

diff --git a/keyboards/jd45/Makefile b/keyboards/jd45/Makefile
index 75d544f16a..4e2a6f00fd 100644
--- a/keyboards/jd45/Makefile
+++ b/keyboards/jd45/Makefile
@@ -1,71 +1,3 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
-endif
+endif
\ No newline at end of file
diff --git a/keyboards/jd45/keymaps/jeebak/config.h b/keyboards/jd45/keymaps/jeebak/config.h
new file mode 100644
index 0000000000..53a1f0a307
--- /dev/null
+++ b/keyboards/jd45/keymaps/jeebak/config.h
@@ -0,0 +1,16 @@
+#include "../../config.h"
+
+/**
+ *JD45 keymap definition macro
+ */
+#define KEYMAP_JD45( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, \
+    K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, \
+    K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, K36, K37, \
+    K38, K39, K40, K41, K42, K43, K44, K45, K46, K47 \
+) { \
+    { K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K10,   K11,   K12,   K13   }, \
+    { K14,   K15,   K16,   K17,   K18,   K19,   K20,   K21,   K22,   K23,   K24,   K25,   KC_NO }, \
+    { K26,   K27,   K28,   K29,   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   KC_NO }, \
+    { K38,   K39,   K40,   K41,   K42, KC_NO,   K43, KC_NO,   K44,   K45,   K46,   K47,   KC_NO }  \
+}
diff --git a/keyboards/jd45/keymaps/jeebak/keymap.c b/keyboards/jd45/keymaps/jeebak/keymap.c
new file mode 100644
index 0000000000..8d26cbde12
--- /dev/null
+++ b/keyboards/jd45/keymaps/jeebak/keymap.c
@@ -0,0 +1,423 @@
+#include "jd45.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _PLOVER 5
+#define _TOUCHCURSOR 6
+#define _MOUSECURSOR 7
+#define _ADJUST 16
+
+// Keycodes
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
+
+enum macro_keycodes {
+  KC_ALT_TAB,
+  KC_CMD_TAB,
+  KC_CTL_TAB,
+  KC_CMD_SLSH,
+  KC_AG_FIND,
+  KC_AG_AGAIN,
+  KC_AG_UNDO,
+  KC_AG_CUT,
+  KC_AG_COPY,
+  KC_AG_PASTE,
+  KC_AG_DESK_L,
+  KC_AG_DESK_R,
+  KC_AG_TAB_C,
+  KC_AG_TAB_N,
+  KC_AG_TAB_R,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Custom macros
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+#define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper
+#define GUI_SEM     GUI_T(KC_SCLN)              // Tap for Semicolon, hold for GUI
+#define ALT_QUO     ALT_T(KC_QUOT)              // Tap for Quote, hold for Alt
+// Requires KC_TRNS/_______ for the trigger key in the destination layer
+#define LT_TC       LT(_TOUCHCURSOR, KC_SPC)    // L-ayer T-ap T-ouch C-ursor
+#define LT_MC(kc)   LT(_MOUSECURSOR, kc)        // L-ayer T-ap M-ouse C-ursor
+#define ALT_TAB     M(KC_ALT_TAB)               // Macro for Alt-Tab
+#define CMD_TAB     M(KC_CMD_TAB)               // Macro for Cmd-Tab
+#define CTL_TAB     M(KC_CTL_TAB)               // Macro for Ctl-Tab
+#define CMD_SLSH    M(KC_CMD_SLSH)              // Macro for Cmd-Slash (personal shortcut to toggle iTerm2 visibility)
+#define AG_FIND     M(KC_AG_FIND)               // Macros for Cmd-[x] vs Ctrl-[x] based on current AG_NORM or AG_SWAP settings
+#define AG_AGAIN    M(KC_AG_AGAIN)
+#define AG_UNDO     M(KC_AG_UNDO)
+#define AG_CUT      M(KC_AG_CUT)
+#define AG_COPY     M(KC_AG_COPY)
+#define AG_PASTE    M(KC_AG_PASTE)
+#define AG_D_L      M(KC_AG_DESK_L)             // For Virtual Desktop Switching: Left, and
+#define AG_D_R      M(KC_AG_DESK_R)             //                                Right
+#define AG_T_C      M(KC_AG_TAB_C)              // For Chrome, etc. Tab Close,
+#define AG_T_N      M(KC_AG_TAB_N)              //                  Tab New, and
+#define AG_T_R      M(KC_AG_TAB_R)              //                  Tab Reopen Closed
+
+/* Qwerty
+ *
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |Hyper/Tab|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * | Ctrl/Esc |   A  |   S  | MC/D |   F  |   G  |   H  |   J  |   K  |   L  |GUI/; |   Alt/"    |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   Shift   |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   RGUI |  Alt  |  GUI  | Lower | TC/Space | TC/Space |  Raise  |  Vol-  |  Vol+  |   Play   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_QWERTY] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    HPR_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_BSPC, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    CTL_ESC ,   KC_A, KC_S,LT_MC(KC_D),    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, GUI_SEM,    ALT_QUO     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  ,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_RGUI  ,  KC_LALT  ,  KC_LGUI  ,   LOWER   ,   LT_TC   ,   LT_TC   ,    RAISE  ,  KC_VOLD  ,  KC_VOLU  , KC_MPLY),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Colemak
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |Hyper/Tab|   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * | Ctrl/Esc |   A  |   R  | MC/S |   T  |   D  |   H  |   N  |   E  |   I  |   O  |    "       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | Shift     |   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   RGUI |  Alt  |  GUI  | Lower | TC/Space | TC/Space |  Raise  |  Vol-  |  Vol+  |   Play   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_COLEMAK] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    HPR_TAB,   KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN, KC_BSPC, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    CTL_ESC ,   KC_A, KC_R,LT_MC(KC_S),    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  ,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_RGUI  ,  KC_LALT  ,  KC_LGUI  ,   LOWER   ,   LT_TC   ,   LT_TC   ,    RAISE  ,  KC_VOLD  ,  KC_VOLU  , KC_MPLY),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Dvorak
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |Hyper/Tab|   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * | Ctrl/Esc |   A  |   O  | MC/E |   U  |   I  |   D  |   H  |   T  |   N  |   S  |    /       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | Shift     |   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |  Sft/Ent  |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |   RGUI |  Alt  |  GUI  | Lower | TC/Space | TC/Space |  Raise  |  Vol-  |  Vol+  |   Play   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_DVORAK] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    HPR_TAB,KC_QUOT, KC_COMM,  KC_DOT,    KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L, KC_BSPC, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    CTL_ESC ,   KC_A,    KC_O,LT_MC(KC_E), KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_LSFT  , KC_SCLN,   KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    SFT_ENT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    KC_RGUI  ,  KC_LALT  ,  KC_LGUI  ,   LOWER   ,   LT_TC   ,   LT_TC   ,    RAISE  ,  KC_VOLD  ,  KC_VOLU  , KC_MPLY),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Lower
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |   ~     |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |   [      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |   "|"      |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   ]       |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   -  |   =  |   [  |   ]  |    \      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * | Brite  |       |       |       |          |          |         |  Prev  |  Next  |   Mute   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_LOWER] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    KC_TILD,KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    KC_LBRC ,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR,    KC_PIPE     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_RBRC  ,  KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC,    KC_BSLS    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    BACKLIT  ,    _______,    _______,    _______,  _______  ,  _______  ,    _______,    KC_MPRV,    KC_MNXT, KC_MUTE),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Raise
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |   0     |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp | Bksp |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |   $      |   4  |   5  |   6  |   .  |   +  |   .  |   4  |   5  |   6  |   *  |   "|"      |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |   =       |   7  |   8  |   9  |   0  |   -  |   .  |   1  |   2  |   3  |   /  |    \      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * | Brite  |       |       |       |          |          |         |  Prev  |  Next  |   Mute   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_RAISE] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    KC_0   ,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_BSPC, KC_BSPC,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    KC_DLR  ,   KC_4,    KC_5,    KC_6,  KC_DOT, KC_PLUS,  KC_DOT,    KC_4,    KC_5,    KC_6, KC_ASTR,    KC_PIPE     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    KC_EQL   ,   KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_DOT,    KC_1,    KC_2,    KC_3, KC_SLSH,    KC_BSLS    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    BACKLIT  ,    _______,    _______,    _______,  _______  ,  _______  ,    _______,    KC_MPRV,    KC_MNXT, KC_MUTE),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* TouchCursor layer (http://martin-stone.github.io/touchcursor/) plus personal customizations
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * | AltTab  |CmdTab|CtlTab| GUI  |Shift |  ~   |Insert| Home |  Up  | End  | Bksp |      |      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |          | Alt  |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|  Desk_R    |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           | Undo | Cut  | Copy |Paste |  `   | PgDn | Del  |Tab_N |Tab_R |iTerm2|           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |        |       |       |       |          |          |         |        |        |          |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ *
+ * The KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND, and KC_AGAIN keycodes don't
+ * seem to work on Mac. Presumably they'll work under Windows.
+ */
+
+[_TOUCHCURSOR] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    ALT_TAB,CMD_TAB, CTL_TAB, KC_LGUI, KC_LSFT, KC_TILD,  KC_INS, KC_HOME,   KC_UP,  KC_END, KC_BSPC, _______, _______,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    _______ ,KC_LALT,  KC_SPC,  AG_T_C, AG_FIND,AG_AGAIN, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT,  AG_D_L,    AG_D_R      ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,AG_UNDO,  AG_CUT, AG_COPY,AG_PASTE,  KC_GRV, KC_PGDN,  KC_DEL,  AG_T_N,  AG_T_R,CMD_SLSH,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______  ,    _______,    _______,    _______, _______   , _______   ,    _______,    _______,    _______, _______),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Mouse Layer
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |         |      |ACCL0 |      |      |      |      |WHL_L |  Up  |WHL_R | BTN2 |      |      |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |          |ACCL2 | BTN2 |      | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 |   BTN5     |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           |      |      |      | BTN3 |      |WHL_Dn| BTN1 |      |      | BTN3 |           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |        |       |       |       |          |          |         |        |        |          |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+
+[_MOUSECURSOR] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    _______,_______, KC_ACL0, _______, _______, _______, _______, KC_WH_L, KC_MS_U, KC_WH_R, KC_BTN2, _______, _______,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    _______ ,KC_ACL2, KC_BTN2, _______, KC_BTN1, KC_ACL1, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN4,    KC_BTN5     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,_______, _______, _______, KC_BTN3, _______, KC_WH_D, KC_BTN1, _______, _______, KC_BTN3,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______  ,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Plover layer (http://opensteno.org)
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |      #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |         |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |     D       |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * | TogOut    |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |    Z      |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * | Exit   |       |   A   |   O   |          |          |    E    |   U    |        |          |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+
+[_PLOVER] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    KC_1   ,   KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,  KC_1  ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    XXXXXXX ,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    XXXXXXX  ,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,    KC_QUOT    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    EXT_PLV  ,    XXXXXXX,       KC_C,       KC_V,  XXXXXXX  ,  XXXXXXX  ,       KC_N,       KC_M,    XXXXXXX, XXXXXXX),
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+
+/* Adjust (Lower + Raise)
+ * ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+ * |         |      |      |      |      |      |      |      |      |      |      |      | Del  |
+ * |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+ * |          |      |      |      |      |AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|            |
+ * |----------`------`------`------`------`------`------`------`------`------`------`------------|
+ * |           |      |      |      |      |     |       |      |      |      |      |           |
+ * |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+ * |        |       |       |       |          |          |         |        |        |  Reset   |
+ *  `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+ */
+[_ADJUST] = KEYMAP_JD45(
+/*,--------+-------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.*/
+    _______,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL ,
+/*|--------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------`--------|*/
+    _______ ,_______, _______, _______, _______, AG_NORM, AG_SWAP,  QWERTY, COLEMAK,  DVORAK,  PLOVER,    _______     ,
+/*|---------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`----------------|*/
+    _______  ,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______    ,
+/*|----------`-------`--------`--------`--------`--------`--------`--------`--------`--------`--------`---------------|*/
+    _______  ,    _______,    _______,    _______,  _______  ,  _______  ,    _______,    _______,    _______,  RESET)
+/*`----------+-----------+-----------+-----------+----^^^----+----^^^----+-----------+-----------+-----------+--------'*/
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    if (!eeconfig_is_enabled()) {
+      eeconfig_init();
+    }
+
+    bool use_cmd = true;    // Use, for example, Cmd-Tab, Cmd-C, Cmd-V, etc.
+    // Compare to MAGIC_SWAP_ALT_GUI and MAGIC_UNSWAP_ALT_GUI configs, set in:
+    // quantum/quantum.c
+    if(keymap_config.swap_lalt_lgui == 1 && keymap_config.swap_ralt_rgui == 1) {
+      use_cmd = false;      // ... or, Alt-Tab, Ctrl-C, Ctrl-V, etc.
+    }
+
+    switch (id) {
+      case KC_ALT_TAB:
+        if(use_cmd) { return (record->event.pressed ? MACRO( D(LALT),  D(TAB), END ) : MACRO( U(TAB), END )); }
+        else        { return (record->event.pressed ? MACRO( D(LGUI),  D(TAB), END ) : MACRO( U(TAB), END )); }
+      case KC_CMD_TAB:
+        if(use_cmd) { return (record->event.pressed ? MACRO( D(LGUI),  D(TAB), END ) : MACRO( U(TAB), END )); }
+        else        { return (record->event.pressed ? MACRO( D(LALT),  D(TAB), END ) : MACRO( U(TAB), END )); }
+
+      case KC_CTL_TAB:
+        return (record->event.pressed ? MACRO( D(LCTRL), D(TAB), END ) : MACRO( U(TAB), END ));
+      case KC_CMD_SLSH:
+        return (record->event.pressed ? MACRO( D(LGUI),  D(SLSH),END ) : MACRO( U(SLSH),END ));
+
+      case KC_AG_FIND:
+        return use_cmd ? MACRODOWN( D(LGUI), T(F), END ) : MACRODOWN( D(LCTRL), T(F), END );
+      case KC_AG_AGAIN:
+        return use_cmd ? MACRODOWN( D(LGUI), T(G), END ) : MACRODOWN( D(LCTRL), T(G), END );
+      case KC_AG_UNDO:
+        return use_cmd ? MACRODOWN( D(LGUI), T(Z), END ) : MACRODOWN( D(LCTRL), T(Z), END );
+      case KC_AG_CUT:
+        return use_cmd ? MACRODOWN( D(LGUI), T(X), END ) : MACRODOWN( D(LCTRL), T(X), END );
+      case KC_AG_COPY:
+        return use_cmd ? MACRODOWN( D(LGUI), T(C), END ) : MACRODOWN( D(LCTRL), T(C), END );
+      case KC_AG_PASTE:
+        return use_cmd ? MACRODOWN( D(LGUI), T(V), END ) : MACRODOWN( D(LCTRL), T(V), END );
+
+      case KC_AG_DESK_L:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(SCLN), END ) : MACRODOWN( D(LALT), D(LCTRL), T(SCLN), END );
+      case KC_AG_DESK_R:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LCTRL), T(QUOT), END ) : MACRODOWN( D(LALT), D(LCTRL), T(QUOT), END );
+
+      case KC_AG_TAB_C:
+        return use_cmd ? MACRODOWN( D(LGUI),            T(W), END ) : MACRODOWN( D(LCTRL),            T(W), END );
+      case KC_AG_TAB_N:
+        return use_cmd ? MACRODOWN( D(LGUI),            T(T), END ) : MACRODOWN( D(LCTRL),            T(T), END );
+      case KC_AG_TAB_R:
+        return use_cmd ? MACRODOWN( D(LGUI), D(LSHIFT), T(T), END ) : MACRODOWN( D(LCTRL), D(LSHIFT), T(T), END );
+    }
+
+    return MACRO_NONE;
+}
diff --git a/keyboards/jd45/keymaps/jeebak/readme.md b/keyboards/jd45/keymaps/jeebak/readme.md
new file mode 100644
index 0000000000..2e45a46d9b
--- /dev/null
+++ b/keyboards/jd45/keymaps/jeebak/readme.md
@@ -0,0 +1,129 @@
+jeebak's JD45 layout
+=======================
+NOTE: This is a port of jeebak's planck layout, for jd45.
+
+This WIP keymap attempts to minimize fingers straying away from the home row.
+To aid in this endeavor, when additional modifyer keys to switch layers are
+needed, they will be mapped to home row keys. The `keymap.c` file will contain
+the exact changes. The diagrams in this README shows the highlights of the
+changes from the default mappings.
+
+I also decided to change all calls to `persistant_default_layer_set()` to
+`default_layer_set()` since this is my personal perference.
+
+## Macros
+```
+#define ALT_TAB     M(KC_ALT_TAB)
+```
+
+## Base Layers (Qwerty/Colemak/Dvorak)
+These base layers are mostly the same as the default mappings. The interesting
+changes are shown below.
+
+- The `Ctrl/Esc`, will emit an `Escape` when tapped, and act as a `Control` key when held,
+- `GUI/;` as `;` and `GUI`,
+- `Alt/"` as `"` and `Alt`,
+- `Sft/Ent` as `Enter` and `Shift`, and
+- `Hyper/Tab` as `Tab` and `Hyper`
+
+A `TODO` item is to see if it can also act as a `CapsLock` when double-tapped.
+The arrow keys, which have been moved to the
+[TouchCursor](http://martin-stone.github.io/touchcursor/) layer, have been
+replaced with the Media keys as shown. The `MC/kc` key activates the
+`MouseCursor` layer when held, and emits the corresponding `kc` for its layer,
+when tapped.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  |Hyper/Tab|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   [  | Bksp |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  | Ctrl/Esc |   A  |   S  | MC/D |   F  |   G  |   H  |   J  |   K  |   L  |GUI/; |   Alt/"    |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   Shift   |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  Sft/Ent  |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |   RGUI |  Alt  |  GUI  | Lower | TC/Space | TC/Space |  Raise  |  Vol-  |  Vol+  |   Play   |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
+
+## Lower Layer (Symbols and Function Keys)
+The symbols and functions keys are essentially the same as the default mapping.
+The most notable changes are that the symbol keys from the `RAISE` layer have
+been moved here. The remaining Media keys replace those that are now on the
+base layers. The `BACKLIT` key has also been moved here.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  |   ~     |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      | Bksp |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  |   [      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |   "|"      |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   ]       |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   -  |   =  |   [  |   ]  |    \      |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  | Brite  |       |       |       |          |          |         |  Prev  |  Next  |   Mute   |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
+
+## Raise Layer (Numbers and Arithmetic Operators)
+All of the numbers and arithmetic operators are available on this layer. Some
+keys are duplicated for the convenience of their positions. The `0` and `$`
+keys at the far left are for quick access to beginning and end of line in vim.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  |   0     |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      | Bksp |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  |   $      |   4  |   5  |   6  |   .  |   +  |   .  |   4  |   5  |   6  |   *  |   "|"      |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |   =       |   7  |   8  |   9  |   0  |   -  |   .  |   1  |   2  |   3  |   /  |    \      |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  | Brite  |       |       |       |          |          |         |  Prev  |  Next  |   Mute   |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
+
+## TouchCursor layer plus personal customizations
+[TouchCursor](http://martin-stone.github.io/touchcursor/) uses the `Space` key
+as the modifier, with the `IJKL` home row keys representing the inverted-T of
+the arrow keys. All of the default TouchCursor keymappings for the right hand
+are represented below. My personalizations include all of the keys shown for
+the left hand. Having the `Alt` and `Shift` keys (as well as the `Control` key
+from the base layers) readily accessible from the home row allows quick word
+jumps and highlighting when used in conjunction with the arrow keys. The
+`Alt-Tab` macro is not only useful under Windows, but also under Mac when used
+with alternative switchers like [HyperSwitch](https://bahoom.com/hyperswitch).
+The `Cmd-Tab` and `Ctrl-Tab` sequences are duplicated for easy access while in
+this layer. The `KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_FIND,` and `KC_AGAIN`
+keycodes do not seem to work. There are macros in place that'll "automatically"
+choose the correct version (`Cmd-Tab` vs. `Alt-Tab`, `Cmd-C` vs. `Ctrl-C`,
+etc.) depending on which layout you've currently selected (`AG_NORM` or
+`AG_SWAP`) in the `_ADJUST` layer. The `Desk_L` and `Desk_R` macros are what I
+use to switch between Virtual Desktops Left/Right. The `Tab_C`, `Tab_N` and
+`Tab_R` are for "Close Tab," "New Tab" and "Reopen Closed Tab" for apps such as
+Google Chrome.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  | AltTab  |CmdTab|CtlTab| GUI  |Shift |  ~   |Insert| Home |  Up  | End  | Bksp |      |      |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  |          | Alt  |Space |Tab_C | Find |Again | PgUp | Left | Down |Right |Desk_L|  Desk_R    |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |           | Undo | Cut  | Copy |Paste |  `   | PgDn | Del  |Tab_N |Tab_R |iTerm2|           |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |        |       |       |       |          |          |         |        |        |          |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
+
+## Mouse Layer
+The Mouse layer, closely mimics the layout/behaviour of the TouchCursor layer.
+The `D` key (on QWERTY) is used to activate this layer. All 16 keycodes for the
+mouse from the `doc/keycode.txt` file are represented, and logically located,
+IMHO. The left and right click buttons are duplicated; on the right hand side,
+for a quick click here and there, and again on the left hand side for when the
+buttons need to be held for dragging things or highlighting text, thus allowing
+the right hand to be free to use the up/down/left/right actions.
+```
+  ,---------+------+------+------+------+------+------+------+------+------+------+------+------.
+  |         |      |ACCL0 |      |      |      |      |WHL_L |  Up  |WHL_R | BTN2 |      |      |
+  |---------`------`------`------`------`------`------`------`------`------`------`------`------|
+  |          |ACCL2 | BTN2 |      | BTN1 |ACCL1 |WHL_Up| Left | Down |Right | BTN4 |   BTN5     |
+  |----------`------`------`------`------`------`------`------`------`------`------`------------|
+  |           |      |      |      | BTN3 |      |WHL_Dn| BTN1 |      |      | BTN3 |           |
+  |-----------`------`------`------`------`-----'-------`------`------`------`------`-----------|
+  |        |       |       |       |          |          |         |        |        |          |
+   `-------+-------+-------+-------+---^^^----+---^^^----+---------+--------+--------+----------'
+```
diff --git a/keyboards/jd45/rules.mk b/keyboards/jd45/rules.mk
new file mode 100644
index 0000000000..2f1e266a14
--- /dev/null
+++ b/keyboards/jd45/rules.mk
@@ -0,0 +1,67 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+MIDI_ENABLE ?= YES 		# MIDI controls
+# UNICODE_ENABLE ?= YES 		# Unicode
+BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file